diff options
Diffstat (limited to 'drivers/mmc/card')
-rw-r--r-- | drivers/mmc/card/Kconfig | 17 | ||||
-rw-r--r-- | drivers/mmc/card/Makefile | 11 | ||||
-rw-r--r-- | drivers/mmc/card/block.c | 668 | ||||
-rw-r--r-- | drivers/mmc/card/queue.c | 249 | ||||
-rw-r--r-- | drivers/mmc/card/queue.h | 32 |
5 files changed, 977 insertions, 0 deletions
diff --git a/drivers/mmc/card/Kconfig b/drivers/mmc/card/Kconfig new file mode 100644 index 000000000000..01a9fd376a1f --- /dev/null +++ b/drivers/mmc/card/Kconfig | |||
@@ -0,0 +1,17 @@ | |||
1 | # | ||
2 | # MMC/SD card drivers | ||
3 | # | ||
4 | |||
5 | comment "MMC/SD Card Drivers" | ||
6 | depends MMC | ||
7 | |||
8 | config MMC_BLOCK | ||
9 | tristate "MMC block device driver" | ||
10 | depends on MMC && BLOCK | ||
11 | default y | ||
12 | help | ||
13 | Say Y here to enable the MMC block device driver support. | ||
14 | This provides a block device driver, which you can use to | ||
15 | mount the filesystem. Almost everyone wishing MMC support | ||
16 | should say Y or M here. | ||
17 | |||
diff --git a/drivers/mmc/card/Makefile b/drivers/mmc/card/Makefile new file mode 100644 index 000000000000..cf8c939867f5 --- /dev/null +++ b/drivers/mmc/card/Makefile | |||
@@ -0,0 +1,11 @@ | |||
1 | # | ||
2 | # Makefile for MMC/SD card drivers | ||
3 | # | ||
4 | |||
5 | ifeq ($(CONFIG_MMC_DEBUG),y) | ||
6 | EXTRA_CFLAGS += -DDEBUG | ||
7 | endif | ||
8 | |||
9 | obj-$(CONFIG_MMC_BLOCK) += mmc_block.o | ||
10 | mmc_block-objs := block.o queue.o | ||
11 | |||
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c new file mode 100644 index 000000000000..8eba037a18e0 --- /dev/null +++ b/drivers/mmc/card/block.c | |||
@@ -0,0 +1,668 @@ | |||
1 | /* | ||
2 | * Block driver for media (i.e., flash cards) | ||
3 | * | ||
4 | * Copyright 2002 Hewlett-Packard Company | ||
5 | * Copyright 2005-2007 Pierre Ossman | ||
6 | * | ||
7 | * Use consistent with the GNU GPL is permitted, | ||
8 | * provided that this copyright notice is | ||
9 | * preserved in its entirety in all copies and derived works. | ||
10 | * | ||
11 | * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, | ||
12 | * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS | ||
13 | * FITNESS FOR ANY PARTICULAR PURPOSE. | ||
14 | * | ||
15 | * Many thanks to Alessandro Rubini and Jonathan Corbet! | ||
16 | * | ||
17 | * Author: Andrew Christian | ||
18 | * 28 May 2002 | ||
19 | */ | ||
20 | #include <linux/moduleparam.h> | ||
21 | #include <linux/module.h> | ||
22 | #include <linux/init.h> | ||
23 | |||
24 | #include <linux/kernel.h> | ||
25 | #include <linux/fs.h> | ||
26 | #include <linux/errno.h> | ||
27 | #include <linux/hdreg.h> | ||
28 | #include <linux/kdev_t.h> | ||
29 | #include <linux/blkdev.h> | ||
30 | #include <linux/mutex.h> | ||
31 | #include <linux/scatterlist.h> | ||
32 | |||
33 | #include <linux/mmc/card.h> | ||
34 | #include <linux/mmc/host.h> | ||
35 | #include <linux/mmc/protocol.h> | ||
36 | #include <linux/mmc/host.h> | ||
37 | |||
38 | #include <asm/system.h> | ||
39 | #include <asm/uaccess.h> | ||
40 | |||
41 | #include "queue.h" | ||
42 | |||
43 | /* | ||
44 | * max 8 partitions per card | ||
45 | */ | ||
46 | #define MMC_SHIFT 3 | ||
47 | |||
48 | static int major; | ||
49 | |||
50 | /* | ||
51 | * There is one mmc_blk_data per slot. | ||
52 | */ | ||
53 | struct mmc_blk_data { | ||
54 | spinlock_t lock; | ||
55 | struct gendisk *disk; | ||
56 | struct mmc_queue queue; | ||
57 | |||
58 | unsigned int usage; | ||
59 | unsigned int block_bits; | ||
60 | unsigned int read_only; | ||
61 | }; | ||
62 | |||
63 | static DEFINE_MUTEX(open_lock); | ||
64 | |||
65 | static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk) | ||
66 | { | ||
67 | struct mmc_blk_data *md; | ||
68 | |||
69 | mutex_lock(&open_lock); | ||
70 | md = disk->private_data; | ||
71 | if (md && md->usage == 0) | ||
72 | md = NULL; | ||
73 | if (md) | ||
74 | md->usage++; | ||
75 | mutex_unlock(&open_lock); | ||
76 | |||
77 | return md; | ||
78 | } | ||
79 | |||
80 | static void mmc_blk_put(struct mmc_blk_data *md) | ||
81 | { | ||
82 | mutex_lock(&open_lock); | ||
83 | md->usage--; | ||
84 | if (md->usage == 0) { | ||
85 | put_disk(md->disk); | ||
86 | kfree(md); | ||
87 | } | ||
88 | mutex_unlock(&open_lock); | ||
89 | } | ||
90 | |||
91 | static int mmc_blk_open(struct inode *inode, struct file *filp) | ||
92 | { | ||
93 | struct mmc_blk_data *md; | ||
94 | int ret = -ENXIO; | ||
95 | |||
96 | md = mmc_blk_get(inode->i_bdev->bd_disk); | ||
97 | if (md) { | ||
98 | if (md->usage == 2) | ||
99 | check_disk_change(inode->i_bdev); | ||
100 | ret = 0; | ||
101 | |||
102 | if ((filp->f_mode & FMODE_WRITE) && md->read_only) | ||
103 | ret = -EROFS; | ||
104 | } | ||
105 | |||
106 | return ret; | ||
107 | } | ||
108 | |||
109 | static int mmc_blk_release(struct inode *inode, struct file *filp) | ||
110 | { | ||
111 | struct mmc_blk_data *md = inode->i_bdev->bd_disk->private_data; | ||
112 | |||
113 | mmc_blk_put(md); | ||
114 | return 0; | ||
115 | } | ||
116 | |||
117 | static int | ||
118 | mmc_blk_getgeo(struct block_device *bdev, struct hd_geometry *geo) | ||
119 | { | ||
120 | geo->cylinders = get_capacity(bdev->bd_disk) / (4 * 16); | ||
121 | geo->heads = 4; | ||
122 | geo->sectors = 16; | ||
123 | return 0; | ||
124 | } | ||
125 | |||
126 | static struct block_device_operations mmc_bdops = { | ||
127 | .open = mmc_blk_open, | ||
128 | .release = mmc_blk_release, | ||
129 | .getgeo = mmc_blk_getgeo, | ||
130 | .owner = THIS_MODULE, | ||
131 | }; | ||
132 | |||
133 | struct mmc_blk_request { | ||
134 | struct mmc_request mrq; | ||
135 | struct mmc_command cmd; | ||
136 | struct mmc_command stop; | ||
137 | struct mmc_data data; | ||
138 | }; | ||
139 | |||
140 | static int mmc_blk_prep_rq(struct mmc_queue *mq, struct request *req) | ||
141 | { | ||
142 | struct mmc_blk_data *md = mq->data; | ||
143 | int stat = BLKPREP_OK; | ||
144 | |||
145 | /* | ||
146 | * If we have no device, we haven't finished initialising. | ||
147 | */ | ||
148 | if (!md || !mq->card) { | ||
149 | printk(KERN_ERR "%s: killing request - no device/host\n", | ||
150 | req->rq_disk->disk_name); | ||
151 | stat = BLKPREP_KILL; | ||
152 | } | ||
153 | |||
154 | return stat; | ||
155 | } | ||
156 | |||
157 | static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) | ||
158 | { | ||
159 | int err; | ||
160 | u32 blocks; | ||
161 | |||
162 | struct mmc_request mrq; | ||
163 | struct mmc_command cmd; | ||
164 | struct mmc_data data; | ||
165 | unsigned int timeout_us; | ||
166 | |||
167 | struct scatterlist sg; | ||
168 | |||
169 | memset(&cmd, 0, sizeof(struct mmc_command)); | ||
170 | |||
171 | cmd.opcode = MMC_APP_CMD; | ||
172 | cmd.arg = card->rca << 16; | ||
173 | cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; | ||
174 | |||
175 | err = mmc_wait_for_cmd(card->host, &cmd, 0); | ||
176 | if ((err != MMC_ERR_NONE) || !(cmd.resp[0] & R1_APP_CMD)) | ||
177 | return (u32)-1; | ||
178 | |||
179 | memset(&cmd, 0, sizeof(struct mmc_command)); | ||
180 | |||
181 | cmd.opcode = SD_APP_SEND_NUM_WR_BLKS; | ||
182 | cmd.arg = 0; | ||
183 | cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; | ||
184 | |||
185 | memset(&data, 0, sizeof(struct mmc_data)); | ||
186 | |||
187 | data.timeout_ns = card->csd.tacc_ns * 100; | ||
188 | data.timeout_clks = card->csd.tacc_clks * 100; | ||
189 | |||
190 | timeout_us = data.timeout_ns / 1000; | ||
191 | timeout_us += data.timeout_clks * 1000 / | ||
192 | (card->host->ios.clock / 1000); | ||
193 | |||
194 | if (timeout_us > 100000) { | ||
195 | data.timeout_ns = 100000000; | ||
196 | data.timeout_clks = 0; | ||
197 | } | ||
198 | |||
199 | data.blksz = 4; | ||
200 | data.blocks = 1; | ||
201 | data.flags = MMC_DATA_READ; | ||
202 | data.sg = &sg; | ||
203 | data.sg_len = 1; | ||
204 | |||
205 | memset(&mrq, 0, sizeof(struct mmc_request)); | ||
206 | |||
207 | mrq.cmd = &cmd; | ||
208 | mrq.data = &data; | ||
209 | |||
210 | sg_init_one(&sg, &blocks, 4); | ||
211 | |||
212 | mmc_wait_for_req(card->host, &mrq); | ||
213 | |||
214 | if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) | ||
215 | return (u32)-1; | ||
216 | |||
217 | blocks = ntohl(blocks); | ||
218 | |||
219 | return blocks; | ||
220 | } | ||
221 | |||
222 | static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) | ||
223 | { | ||
224 | struct mmc_blk_data *md = mq->data; | ||
225 | struct mmc_card *card = md->queue.card; | ||
226 | struct mmc_blk_request brq; | ||
227 | int ret = 1, sg_pos, data_size; | ||
228 | |||
229 | if (mmc_card_claim_host(card)) | ||
230 | goto flush_queue; | ||
231 | |||
232 | do { | ||
233 | struct mmc_command cmd; | ||
234 | u32 readcmd, writecmd; | ||
235 | |||
236 | memset(&brq, 0, sizeof(struct mmc_blk_request)); | ||
237 | brq.mrq.cmd = &brq.cmd; | ||
238 | brq.mrq.data = &brq.data; | ||
239 | |||
240 | brq.cmd.arg = req->sector; | ||
241 | if (!mmc_card_blockaddr(card)) | ||
242 | brq.cmd.arg <<= 9; | ||
243 | brq.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; | ||
244 | brq.data.blksz = 1 << md->block_bits; | ||
245 | brq.stop.opcode = MMC_STOP_TRANSMISSION; | ||
246 | brq.stop.arg = 0; | ||
247 | brq.stop.flags = MMC_RSP_R1B | MMC_CMD_AC; | ||
248 | brq.data.blocks = req->nr_sectors >> (md->block_bits - 9); | ||
249 | if (brq.data.blocks > card->host->max_blk_count) | ||
250 | brq.data.blocks = card->host->max_blk_count; | ||
251 | |||
252 | mmc_set_data_timeout(&brq.data, card, rq_data_dir(req) != READ); | ||
253 | |||
254 | /* | ||
255 | * If the host doesn't support multiple block writes, force | ||
256 | * block writes to single block. SD cards are excepted from | ||
257 | * this rule as they support querying the number of | ||
258 | * successfully written sectors. | ||
259 | */ | ||
260 | if (rq_data_dir(req) != READ && | ||
261 | !(card->host->caps & MMC_CAP_MULTIWRITE) && | ||
262 | !mmc_card_sd(card)) | ||
263 | brq.data.blocks = 1; | ||
264 | |||
265 | if (brq.data.blocks > 1) { | ||
266 | brq.data.flags |= MMC_DATA_MULTI; | ||
267 | brq.mrq.stop = &brq.stop; | ||
268 | readcmd = MMC_READ_MULTIPLE_BLOCK; | ||
269 | writecmd = MMC_WRITE_MULTIPLE_BLOCK; | ||
270 | } else { | ||
271 | brq.mrq.stop = NULL; | ||
272 | readcmd = MMC_READ_SINGLE_BLOCK; | ||
273 | writecmd = MMC_WRITE_BLOCK; | ||
274 | } | ||
275 | |||
276 | if (rq_data_dir(req) == READ) { | ||
277 | brq.cmd.opcode = readcmd; | ||
278 | brq.data.flags |= MMC_DATA_READ; | ||
279 | } else { | ||
280 | brq.cmd.opcode = writecmd; | ||
281 | brq.data.flags |= MMC_DATA_WRITE; | ||
282 | } | ||
283 | |||
284 | brq.data.sg = mq->sg; | ||
285 | brq.data.sg_len = blk_rq_map_sg(req->q, req, brq.data.sg); | ||
286 | |||
287 | if (brq.data.blocks != | ||
288 | (req->nr_sectors >> (md->block_bits - 9))) { | ||
289 | data_size = brq.data.blocks * brq.data.blksz; | ||
290 | for (sg_pos = 0; sg_pos < brq.data.sg_len; sg_pos++) { | ||
291 | data_size -= mq->sg[sg_pos].length; | ||
292 | if (data_size <= 0) { | ||
293 | mq->sg[sg_pos].length += data_size; | ||
294 | sg_pos++; | ||
295 | break; | ||
296 | } | ||
297 | } | ||
298 | brq.data.sg_len = sg_pos; | ||
299 | } | ||
300 | |||
301 | mmc_wait_for_req(card->host, &brq.mrq); | ||
302 | if (brq.cmd.error) { | ||
303 | printk(KERN_ERR "%s: error %d sending read/write command\n", | ||
304 | req->rq_disk->disk_name, brq.cmd.error); | ||
305 | goto cmd_err; | ||
306 | } | ||
307 | |||
308 | if (brq.data.error) { | ||
309 | printk(KERN_ERR "%s: error %d transferring data\n", | ||
310 | req->rq_disk->disk_name, brq.data.error); | ||
311 | goto cmd_err; | ||
312 | } | ||
313 | |||
314 | if (brq.stop.error) { | ||
315 | printk(KERN_ERR "%s: error %d sending stop command\n", | ||
316 | req->rq_disk->disk_name, brq.stop.error); | ||
317 | goto cmd_err; | ||
318 | } | ||
319 | |||
320 | if (rq_data_dir(req) != READ) { | ||
321 | do { | ||
322 | int err; | ||
323 | |||
324 | cmd.opcode = MMC_SEND_STATUS; | ||
325 | cmd.arg = card->rca << 16; | ||
326 | cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; | ||
327 | err = mmc_wait_for_cmd(card->host, &cmd, 5); | ||
328 | if (err) { | ||
329 | printk(KERN_ERR "%s: error %d requesting status\n", | ||
330 | req->rq_disk->disk_name, err); | ||
331 | goto cmd_err; | ||
332 | } | ||
333 | } while (!(cmd.resp[0] & R1_READY_FOR_DATA)); | ||
334 | |||
335 | #if 0 | ||
336 | if (cmd.resp[0] & ~0x00000900) | ||
337 | printk(KERN_ERR "%s: status = %08x\n", | ||
338 | req->rq_disk->disk_name, cmd.resp[0]); | ||
339 | if (mmc_decode_status(cmd.resp)) | ||
340 | goto cmd_err; | ||
341 | #endif | ||
342 | } | ||
343 | |||
344 | /* | ||
345 | * A block was successfully transferred. | ||
346 | */ | ||
347 | spin_lock_irq(&md->lock); | ||
348 | ret = end_that_request_chunk(req, 1, brq.data.bytes_xfered); | ||
349 | if (!ret) { | ||
350 | /* | ||
351 | * The whole request completed successfully. | ||
352 | */ | ||
353 | add_disk_randomness(req->rq_disk); | ||
354 | blkdev_dequeue_request(req); | ||
355 | end_that_request_last(req, 1); | ||
356 | } | ||
357 | spin_unlock_irq(&md->lock); | ||
358 | } while (ret); | ||
359 | |||
360 | mmc_card_release_host(card); | ||
361 | |||
362 | return 1; | ||
363 | |||
364 | cmd_err: | ||
365 | /* | ||
366 | * If this is an SD card and we're writing, we can first | ||
367 | * mark the known good sectors as ok. | ||
368 | * | ||
369 | * If the card is not SD, we can still ok written sectors | ||
370 | * if the controller can do proper error reporting. | ||
371 | * | ||
372 | * For reads we just fail the entire chunk as that should | ||
373 | * be safe in all cases. | ||
374 | */ | ||
375 | if (rq_data_dir(req) != READ && mmc_card_sd(card)) { | ||
376 | u32 blocks; | ||
377 | unsigned int bytes; | ||
378 | |||
379 | blocks = mmc_sd_num_wr_blocks(card); | ||
380 | if (blocks != (u32)-1) { | ||
381 | if (card->csd.write_partial) | ||
382 | bytes = blocks << md->block_bits; | ||
383 | else | ||
384 | bytes = blocks << 9; | ||
385 | spin_lock_irq(&md->lock); | ||
386 | ret = end_that_request_chunk(req, 1, bytes); | ||
387 | spin_unlock_irq(&md->lock); | ||
388 | } | ||
389 | } else if (rq_data_dir(req) != READ && | ||
390 | (card->host->caps & MMC_CAP_MULTIWRITE)) { | ||
391 | spin_lock_irq(&md->lock); | ||
392 | ret = end_that_request_chunk(req, 1, brq.data.bytes_xfered); | ||
393 | spin_unlock_irq(&md->lock); | ||
394 | } | ||
395 | |||
396 | flush_queue: | ||
397 | |||
398 | mmc_card_release_host(card); | ||
399 | |||
400 | spin_lock_irq(&md->lock); | ||
401 | while (ret) { | ||
402 | ret = end_that_request_chunk(req, 0, | ||
403 | req->current_nr_sectors << 9); | ||
404 | } | ||
405 | |||
406 | add_disk_randomness(req->rq_disk); | ||
407 | blkdev_dequeue_request(req); | ||
408 | end_that_request_last(req, 0); | ||
409 | spin_unlock_irq(&md->lock); | ||
410 | |||
411 | return 0; | ||
412 | } | ||
413 | |||
414 | #define MMC_NUM_MINORS (256 >> MMC_SHIFT) | ||
415 | |||
416 | static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))]; | ||
417 | |||
418 | static inline int mmc_blk_readonly(struct mmc_card *card) | ||
419 | { | ||
420 | return mmc_card_readonly(card) || | ||
421 | !(card->csd.cmdclass & CCC_BLOCK_WRITE); | ||
422 | } | ||
423 | |||
424 | static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) | ||
425 | { | ||
426 | struct mmc_blk_data *md; | ||
427 | int devidx, ret; | ||
428 | |||
429 | devidx = find_first_zero_bit(dev_use, MMC_NUM_MINORS); | ||
430 | if (devidx >= MMC_NUM_MINORS) | ||
431 | return ERR_PTR(-ENOSPC); | ||
432 | __set_bit(devidx, dev_use); | ||
433 | |||
434 | md = kmalloc(sizeof(struct mmc_blk_data), GFP_KERNEL); | ||
435 | if (!md) { | ||
436 | ret = -ENOMEM; | ||
437 | goto out; | ||
438 | } | ||
439 | |||
440 | memset(md, 0, sizeof(struct mmc_blk_data)); | ||
441 | |||
442 | /* | ||
443 | * Set the read-only status based on the supported commands | ||
444 | * and the write protect switch. | ||
445 | */ | ||
446 | md->read_only = mmc_blk_readonly(card); | ||
447 | |||
448 | /* | ||
449 | * Both SD and MMC specifications state (although a bit | ||
450 | * unclearly in the MMC case) that a block size of 512 | ||
451 | * bytes must always be supported by the card. | ||
452 | */ | ||
453 | md->block_bits = 9; | ||
454 | |||
455 | md->disk = alloc_disk(1 << MMC_SHIFT); | ||
456 | if (md->disk == NULL) { | ||
457 | ret = -ENOMEM; | ||
458 | goto err_kfree; | ||
459 | } | ||
460 | |||
461 | spin_lock_init(&md->lock); | ||
462 | md->usage = 1; | ||
463 | |||
464 | ret = mmc_init_queue(&md->queue, card, &md->lock); | ||
465 | if (ret) | ||
466 | goto err_putdisk; | ||
467 | |||
468 | md->queue.prep_fn = mmc_blk_prep_rq; | ||
469 | md->queue.issue_fn = mmc_blk_issue_rq; | ||
470 | md->queue.data = md; | ||
471 | |||
472 | md->disk->major = major; | ||
473 | md->disk->first_minor = devidx << MMC_SHIFT; | ||
474 | md->disk->fops = &mmc_bdops; | ||
475 | md->disk->private_data = md; | ||
476 | md->disk->queue = md->queue.queue; | ||
477 | md->disk->driverfs_dev = &card->dev; | ||
478 | |||
479 | /* | ||
480 | * As discussed on lkml, GENHD_FL_REMOVABLE should: | ||
481 | * | ||
482 | * - be set for removable media with permanent block devices | ||
483 | * - be unset for removable block devices with permanent media | ||
484 | * | ||
485 | * Since MMC block devices clearly fall under the second | ||
486 | * case, we do not set GENHD_FL_REMOVABLE. Userspace | ||
487 | * should use the block device creation/destruction hotplug | ||
488 | * messages to tell when the card is present. | ||
489 | */ | ||
490 | |||
491 | sprintf(md->disk->disk_name, "mmcblk%d", devidx); | ||
492 | |||
493 | blk_queue_hardsect_size(md->queue.queue, 1 << md->block_bits); | ||
494 | |||
495 | if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) { | ||
496 | /* | ||
497 | * The EXT_CSD sector count is in number or 512 byte | ||
498 | * sectors. | ||
499 | */ | ||
500 | set_capacity(md->disk, card->ext_csd.sectors); | ||
501 | } else { | ||
502 | /* | ||
503 | * The CSD capacity field is in units of read_blkbits. | ||
504 | * set_capacity takes units of 512 bytes. | ||
505 | */ | ||
506 | set_capacity(md->disk, | ||
507 | card->csd.capacity << (card->csd.read_blkbits - 9)); | ||
508 | } | ||
509 | return md; | ||
510 | |||
511 | err_putdisk: | ||
512 | put_disk(md->disk); | ||
513 | err_kfree: | ||
514 | kfree(md); | ||
515 | out: | ||
516 | return ERR_PTR(ret); | ||
517 | } | ||
518 | |||
519 | static int | ||
520 | mmc_blk_set_blksize(struct mmc_blk_data *md, struct mmc_card *card) | ||
521 | { | ||
522 | struct mmc_command cmd; | ||
523 | int err; | ||
524 | |||
525 | /* Block-addressed cards ignore MMC_SET_BLOCKLEN. */ | ||
526 | if (mmc_card_blockaddr(card)) | ||
527 | return 0; | ||
528 | |||
529 | mmc_card_claim_host(card); | ||
530 | cmd.opcode = MMC_SET_BLOCKLEN; | ||
531 | cmd.arg = 1 << md->block_bits; | ||
532 | cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; | ||
533 | err = mmc_wait_for_cmd(card->host, &cmd, 5); | ||
534 | mmc_card_release_host(card); | ||
535 | |||
536 | if (err) { | ||
537 | printk(KERN_ERR "%s: unable to set block size to %d: %d\n", | ||
538 | md->disk->disk_name, cmd.arg, err); | ||
539 | return -EINVAL; | ||
540 | } | ||
541 | |||
542 | return 0; | ||
543 | } | ||
544 | |||
545 | static int mmc_blk_probe(struct mmc_card *card) | ||
546 | { | ||
547 | struct mmc_blk_data *md; | ||
548 | int err; | ||
549 | |||
550 | /* | ||
551 | * Check that the card supports the command class(es) we need. | ||
552 | */ | ||
553 | if (!(card->csd.cmdclass & CCC_BLOCK_READ)) | ||
554 | return -ENODEV; | ||
555 | |||
556 | md = mmc_blk_alloc(card); | ||
557 | if (IS_ERR(md)) | ||
558 | return PTR_ERR(md); | ||
559 | |||
560 | err = mmc_blk_set_blksize(md, card); | ||
561 | if (err) | ||
562 | goto out; | ||
563 | |||
564 | printk(KERN_INFO "%s: %s %s %lluKiB %s\n", | ||
565 | md->disk->disk_name, mmc_card_id(card), mmc_card_name(card), | ||
566 | (unsigned long long)(get_capacity(md->disk) >> 1), | ||
567 | md->read_only ? "(ro)" : ""); | ||
568 | |||
569 | mmc_set_drvdata(card, md); | ||
570 | add_disk(md->disk); | ||
571 | return 0; | ||
572 | |||
573 | out: | ||
574 | mmc_blk_put(md); | ||
575 | |||
576 | return err; | ||
577 | } | ||
578 | |||
579 | static void mmc_blk_remove(struct mmc_card *card) | ||
580 | { | ||
581 | struct mmc_blk_data *md = mmc_get_drvdata(card); | ||
582 | |||
583 | if (md) { | ||
584 | int devidx; | ||
585 | |||
586 | /* Stop new requests from getting into the queue */ | ||
587 | del_gendisk(md->disk); | ||
588 | |||
589 | /* Then flush out any already in there */ | ||
590 | mmc_cleanup_queue(&md->queue); | ||
591 | |||
592 | devidx = md->disk->first_minor >> MMC_SHIFT; | ||
593 | __clear_bit(devidx, dev_use); | ||
594 | |||
595 | mmc_blk_put(md); | ||
596 | } | ||
597 | mmc_set_drvdata(card, NULL); | ||
598 | } | ||
599 | |||
600 | #ifdef CONFIG_PM | ||
601 | static int mmc_blk_suspend(struct mmc_card *card, pm_message_t state) | ||
602 | { | ||
603 | struct mmc_blk_data *md = mmc_get_drvdata(card); | ||
604 | |||
605 | if (md) { | ||
606 | mmc_queue_suspend(&md->queue); | ||
607 | } | ||
608 | return 0; | ||
609 | } | ||
610 | |||
611 | static int mmc_blk_resume(struct mmc_card *card) | ||
612 | { | ||
613 | struct mmc_blk_data *md = mmc_get_drvdata(card); | ||
614 | |||
615 | if (md) { | ||
616 | mmc_blk_set_blksize(md, card); | ||
617 | mmc_queue_resume(&md->queue); | ||
618 | } | ||
619 | return 0; | ||
620 | } | ||
621 | #else | ||
622 | #define mmc_blk_suspend NULL | ||
623 | #define mmc_blk_resume NULL | ||
624 | #endif | ||
625 | |||
626 | static struct mmc_driver mmc_driver = { | ||
627 | .drv = { | ||
628 | .name = "mmcblk", | ||
629 | }, | ||
630 | .probe = mmc_blk_probe, | ||
631 | .remove = mmc_blk_remove, | ||
632 | .suspend = mmc_blk_suspend, | ||
633 | .resume = mmc_blk_resume, | ||
634 | }; | ||
635 | |||
636 | static int __init mmc_blk_init(void) | ||
637 | { | ||
638 | int res = -ENOMEM; | ||
639 | |||
640 | res = register_blkdev(major, "mmc"); | ||
641 | if (res < 0) { | ||
642 | printk(KERN_WARNING "Unable to get major %d for MMC media: %d\n", | ||
643 | major, res); | ||
644 | goto out; | ||
645 | } | ||
646 | if (major == 0) | ||
647 | major = res; | ||
648 | |||
649 | return mmc_register_driver(&mmc_driver); | ||
650 | |||
651 | out: | ||
652 | return res; | ||
653 | } | ||
654 | |||
655 | static void __exit mmc_blk_exit(void) | ||
656 | { | ||
657 | mmc_unregister_driver(&mmc_driver); | ||
658 | unregister_blkdev(major, "mmc"); | ||
659 | } | ||
660 | |||
661 | module_init(mmc_blk_init); | ||
662 | module_exit(mmc_blk_exit); | ||
663 | |||
664 | MODULE_LICENSE("GPL"); | ||
665 | MODULE_DESCRIPTION("Multimedia Card (MMC) block device driver"); | ||
666 | |||
667 | module_param(major, int, 0444); | ||
668 | MODULE_PARM_DESC(major, "specify the major device number for MMC block driver"); | ||
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c new file mode 100644 index 000000000000..aa75ac11a19e --- /dev/null +++ b/drivers/mmc/card/queue.c | |||
@@ -0,0 +1,249 @@ | |||
1 | /* | ||
2 | * linux/drivers/mmc/queue.c | ||
3 | * | ||
4 | * Copyright (C) 2003 Russell King, All Rights Reserved. | ||
5 | * Copyright 2006-2007 Pierre Ossman | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify | ||
8 | * it under the terms of the GNU General Public License version 2 as | ||
9 | * published by the Free Software Foundation. | ||
10 | * | ||
11 | */ | ||
12 | #include <linux/module.h> | ||
13 | #include <linux/blkdev.h> | ||
14 | #include <linux/kthread.h> | ||
15 | |||
16 | #include <linux/mmc/card.h> | ||
17 | #include <linux/mmc/host.h> | ||
18 | #include "queue.h" | ||
19 | |||
20 | #define MMC_QUEUE_SUSPENDED (1 << 0) | ||
21 | |||
22 | /* | ||
23 | * Prepare a MMC request. Essentially, this means passing the | ||
24 | * preparation off to the media driver. The media driver will | ||
25 | * create a mmc_io_request in req->special. | ||
26 | */ | ||
27 | static int mmc_prep_request(struct request_queue *q, struct request *req) | ||
28 | { | ||
29 | struct mmc_queue *mq = q->queuedata; | ||
30 | int ret = BLKPREP_KILL; | ||
31 | |||
32 | if (blk_special_request(req)) { | ||
33 | /* | ||
34 | * Special commands already have the command | ||
35 | * blocks already setup in req->special. | ||
36 | */ | ||
37 | BUG_ON(!req->special); | ||
38 | |||
39 | ret = BLKPREP_OK; | ||
40 | } else if (blk_fs_request(req) || blk_pc_request(req)) { | ||
41 | /* | ||
42 | * Block I/O requests need translating according | ||
43 | * to the protocol. | ||
44 | */ | ||
45 | ret = mq->prep_fn(mq, req); | ||
46 | } else { | ||
47 | /* | ||
48 | * Everything else is invalid. | ||
49 | */ | ||
50 | blk_dump_rq_flags(req, "MMC bad request"); | ||
51 | } | ||
52 | |||
53 | if (ret == BLKPREP_OK) | ||
54 | req->cmd_flags |= REQ_DONTPREP; | ||
55 | |||
56 | return ret; | ||
57 | } | ||
58 | |||
59 | static int mmc_queue_thread(void *d) | ||
60 | { | ||
61 | struct mmc_queue *mq = d; | ||
62 | struct request_queue *q = mq->queue; | ||
63 | |||
64 | /* | ||
65 | * Set iothread to ensure that we aren't put to sleep by | ||
66 | * the process freezing. We handle suspension ourselves. | ||
67 | */ | ||
68 | current->flags |= PF_MEMALLOC|PF_NOFREEZE; | ||
69 | |||
70 | down(&mq->thread_sem); | ||
71 | do { | ||
72 | struct request *req = NULL; | ||
73 | |||
74 | spin_lock_irq(q->queue_lock); | ||
75 | set_current_state(TASK_INTERRUPTIBLE); | ||
76 | if (!blk_queue_plugged(q)) | ||
77 | req = elv_next_request(q); | ||
78 | mq->req = req; | ||
79 | spin_unlock_irq(q->queue_lock); | ||
80 | |||
81 | if (!req) { | ||
82 | if (kthread_should_stop()) { | ||
83 | set_current_state(TASK_RUNNING); | ||
84 | break; | ||
85 | } | ||
86 | up(&mq->thread_sem); | ||
87 | schedule(); | ||
88 | down(&mq->thread_sem); | ||
89 | continue; | ||
90 | } | ||
91 | set_current_state(TASK_RUNNING); | ||
92 | |||
93 | mq->issue_fn(mq, req); | ||
94 | } while (1); | ||
95 | up(&mq->thread_sem); | ||
96 | |||
97 | return 0; | ||
98 | } | ||
99 | |||
100 | /* | ||
101 | * Generic MMC request handler. This is called for any queue on a | ||
102 | * particular host. When the host is not busy, we look for a request | ||
103 | * on any queue on this host, and attempt to issue it. This may | ||
104 | * not be the queue we were asked to process. | ||
105 | */ | ||
106 | static void mmc_request(request_queue_t *q) | ||
107 | { | ||
108 | struct mmc_queue *mq = q->queuedata; | ||
109 | struct request *req; | ||
110 | int ret; | ||
111 | |||
112 | if (!mq) { | ||
113 | printk(KERN_ERR "MMC: killing requests for dead queue\n"); | ||
114 | while ((req = elv_next_request(q)) != NULL) { | ||
115 | do { | ||
116 | ret = end_that_request_chunk(req, 0, | ||
117 | req->current_nr_sectors << 9); | ||
118 | } while (ret); | ||
119 | } | ||
120 | return; | ||
121 | } | ||
122 | |||
123 | if (!mq->req) | ||
124 | wake_up_process(mq->thread); | ||
125 | } | ||
126 | |||
127 | /** | ||
128 | * mmc_init_queue - initialise a queue structure. | ||
129 | * @mq: mmc queue | ||
130 | * @card: mmc card to attach this queue | ||
131 | * @lock: queue lock | ||
132 | * | ||
133 | * Initialise a MMC card request queue. | ||
134 | */ | ||
135 | int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock) | ||
136 | { | ||
137 | struct mmc_host *host = card->host; | ||
138 | u64 limit = BLK_BOUNCE_HIGH; | ||
139 | int ret; | ||
140 | |||
141 | if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask) | ||
142 | limit = *mmc_dev(host)->dma_mask; | ||
143 | |||
144 | mq->card = card; | ||
145 | mq->queue = blk_init_queue(mmc_request, lock); | ||
146 | if (!mq->queue) | ||
147 | return -ENOMEM; | ||
148 | |||
149 | blk_queue_prep_rq(mq->queue, mmc_prep_request); | ||
150 | blk_queue_bounce_limit(mq->queue, limit); | ||
151 | blk_queue_max_sectors(mq->queue, host->max_req_size / 512); | ||
152 | blk_queue_max_phys_segments(mq->queue, host->max_phys_segs); | ||
153 | blk_queue_max_hw_segments(mq->queue, host->max_hw_segs); | ||
154 | blk_queue_max_segment_size(mq->queue, host->max_seg_size); | ||
155 | |||
156 | mq->queue->queuedata = mq; | ||
157 | mq->req = NULL; | ||
158 | |||
159 | mq->sg = kmalloc(sizeof(struct scatterlist) * host->max_phys_segs, | ||
160 | GFP_KERNEL); | ||
161 | if (!mq->sg) { | ||
162 | ret = -ENOMEM; | ||
163 | goto cleanup_queue; | ||
164 | } | ||
165 | |||
166 | init_MUTEX(&mq->thread_sem); | ||
167 | |||
168 | mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd"); | ||
169 | if (IS_ERR(mq->thread)) { | ||
170 | ret = PTR_ERR(mq->thread); | ||
171 | goto free_sg; | ||
172 | } | ||
173 | |||
174 | return 0; | ||
175 | |||
176 | free_sg: | ||
177 | kfree(mq->sg); | ||
178 | mq->sg = NULL; | ||
179 | cleanup_queue: | ||
180 | blk_cleanup_queue(mq->queue); | ||
181 | return ret; | ||
182 | } | ||
183 | |||
184 | void mmc_cleanup_queue(struct mmc_queue *mq) | ||
185 | { | ||
186 | request_queue_t *q = mq->queue; | ||
187 | unsigned long flags; | ||
188 | |||
189 | /* Mark that we should start throwing out stragglers */ | ||
190 | spin_lock_irqsave(q->queue_lock, flags); | ||
191 | q->queuedata = NULL; | ||
192 | spin_unlock_irqrestore(q->queue_lock, flags); | ||
193 | |||
194 | /* Then terminate our worker thread */ | ||
195 | kthread_stop(mq->thread); | ||
196 | |||
197 | kfree(mq->sg); | ||
198 | mq->sg = NULL; | ||
199 | |||
200 | blk_cleanup_queue(mq->queue); | ||
201 | |||
202 | mq->card = NULL; | ||
203 | } | ||
204 | EXPORT_SYMBOL(mmc_cleanup_queue); | ||
205 | |||
206 | /** | ||
207 | * mmc_queue_suspend - suspend a MMC request queue | ||
208 | * @mq: MMC queue to suspend | ||
209 | * | ||
210 | * Stop the block request queue, and wait for our thread to | ||
211 | * complete any outstanding requests. This ensures that we | ||
212 | * won't suspend while a request is being processed. | ||
213 | */ | ||
214 | void mmc_queue_suspend(struct mmc_queue *mq) | ||
215 | { | ||
216 | request_queue_t *q = mq->queue; | ||
217 | unsigned long flags; | ||
218 | |||
219 | if (!(mq->flags & MMC_QUEUE_SUSPENDED)) { | ||
220 | mq->flags |= MMC_QUEUE_SUSPENDED; | ||
221 | |||
222 | spin_lock_irqsave(q->queue_lock, flags); | ||
223 | blk_stop_queue(q); | ||
224 | spin_unlock_irqrestore(q->queue_lock, flags); | ||
225 | |||
226 | down(&mq->thread_sem); | ||
227 | } | ||
228 | } | ||
229 | |||
230 | /** | ||
231 | * mmc_queue_resume - resume a previously suspended MMC request queue | ||
232 | * @mq: MMC queue to resume | ||
233 | */ | ||
234 | void mmc_queue_resume(struct mmc_queue *mq) | ||
235 | { | ||
236 | request_queue_t *q = mq->queue; | ||
237 | unsigned long flags; | ||
238 | |||
239 | if (mq->flags & MMC_QUEUE_SUSPENDED) { | ||
240 | mq->flags &= ~MMC_QUEUE_SUSPENDED; | ||
241 | |||
242 | up(&mq->thread_sem); | ||
243 | |||
244 | spin_lock_irqsave(q->queue_lock, flags); | ||
245 | blk_start_queue(q); | ||
246 | spin_unlock_irqrestore(q->queue_lock, flags); | ||
247 | } | ||
248 | } | ||
249 | |||
diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h new file mode 100644 index 000000000000..c9f139e764f6 --- /dev/null +++ b/drivers/mmc/card/queue.h | |||
@@ -0,0 +1,32 @@ | |||
1 | #ifndef MMC_QUEUE_H | ||
2 | #define MMC_QUEUE_H | ||
3 | |||
4 | struct request; | ||
5 | struct task_struct; | ||
6 | |||
7 | struct mmc_queue { | ||
8 | struct mmc_card *card; | ||
9 | struct task_struct *thread; | ||
10 | struct semaphore thread_sem; | ||
11 | unsigned int flags; | ||
12 | struct request *req; | ||
13 | int (*prep_fn)(struct mmc_queue *, struct request *); | ||
14 | int (*issue_fn)(struct mmc_queue *, struct request *); | ||
15 | void *data; | ||
16 | struct request_queue *queue; | ||
17 | struct scatterlist *sg; | ||
18 | }; | ||
19 | |||
20 | struct mmc_io_request { | ||
21 | struct request *rq; | ||
22 | int num; | ||
23 | struct mmc_command selcmd; /* mmc_queue private */ | ||
24 | struct mmc_command cmd[4]; /* max 4 commands */ | ||
25 | }; | ||
26 | |||
27 | extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *); | ||
28 | extern void mmc_cleanup_queue(struct mmc_queue *); | ||
29 | extern void mmc_queue_suspend(struct mmc_queue *); | ||
30 | extern void mmc_queue_resume(struct mmc_queue *); | ||
31 | |||
32 | #endif | ||