diff options
Diffstat (limited to 'drivers/misc')
-rw-r--r-- | drivers/misc/Kconfig | 1 | ||||
-rw-r--r-- | drivers/misc/Makefile | 1 | ||||
-rw-r--r-- | drivers/misc/cb710/Kconfig | 25 | ||||
-rw-r--r-- | drivers/misc/cb710/Makefile | 8 | ||||
-rw-r--r-- | drivers/misc/cb710/core.c | 357 | ||||
-rw-r--r-- | drivers/misc/cb710/debug.c | 119 | ||||
-rw-r--r-- | drivers/misc/cb710/sgbuf2.c | 150 | ||||
-rw-r--r-- | drivers/misc/enclosure.c | 6 |
8 files changed, 664 insertions, 3 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 6d1ac180f6ee..68ab39d7cb35 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig | |||
@@ -235,5 +235,6 @@ config ISL29003 | |||
235 | 235 | ||
236 | source "drivers/misc/c2port/Kconfig" | 236 | source "drivers/misc/c2port/Kconfig" |
237 | source "drivers/misc/eeprom/Kconfig" | 237 | source "drivers/misc/eeprom/Kconfig" |
238 | source "drivers/misc/cb710/Kconfig" | ||
238 | 239 | ||
239 | endif # MISC_DEVICES | 240 | endif # MISC_DEVICES |
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 7871f05dcb9b..36f733cd60e6 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile | |||
@@ -21,3 +21,4 @@ obj-$(CONFIG_HP_ILO) += hpilo.o | |||
21 | obj-$(CONFIG_ISL29003) += isl29003.o | 21 | obj-$(CONFIG_ISL29003) += isl29003.o |
22 | obj-$(CONFIG_C2PORT) += c2port/ | 22 | obj-$(CONFIG_C2PORT) += c2port/ |
23 | obj-y += eeprom/ | 23 | obj-y += eeprom/ |
24 | obj-y += cb710/ | ||
diff --git a/drivers/misc/cb710/Kconfig b/drivers/misc/cb710/Kconfig new file mode 100644 index 000000000000..22429b8b1068 --- /dev/null +++ b/drivers/misc/cb710/Kconfig | |||
@@ -0,0 +1,25 @@ | |||
1 | config CB710_CORE | ||
2 | tristate "ENE CB710/720 Flash memory card reader support" | ||
3 | depends on PCI | ||
4 | help | ||
5 | This option enables support for PCI ENE CB710/720 Flash memory card | ||
6 | reader found in some laptops (ie. some versions of HP Compaq nx9500). | ||
7 | |||
8 | You will also have to select some flash card format drivers (MMC/SD, | ||
9 | MemoryStick). | ||
10 | |||
11 | This driver can also be built as a module. If so, the module | ||
12 | will be called cb710. | ||
13 | |||
14 | config CB710_DEBUG | ||
15 | bool "Enable driver debugging" | ||
16 | depends on CB710_CORE != n | ||
17 | default n | ||
18 | help | ||
19 | This is an option for use by developers; most people should | ||
20 | say N here. This adds a lot of debugging output to dmesg. | ||
21 | |||
22 | config CB710_DEBUG_ASSUMPTIONS | ||
23 | bool | ||
24 | depends on CB710_CORE != n | ||
25 | default y | ||
diff --git a/drivers/misc/cb710/Makefile b/drivers/misc/cb710/Makefile new file mode 100644 index 000000000000..7b80cbf1a609 --- /dev/null +++ b/drivers/misc/cb710/Makefile | |||
@@ -0,0 +1,8 @@ | |||
1 | ifeq ($(CONFIG_CB710_DEBUG),y) | ||
2 | EXTRA_CFLAGS += -DDEBUG | ||
3 | endif | ||
4 | |||
5 | obj-$(CONFIG_CB710_CORE) += cb710.o | ||
6 | |||
7 | cb710-y := core.o sgbuf2.o | ||
8 | cb710-$(CONFIG_CB710_DEBUG) += debug.o | ||
diff --git a/drivers/misc/cb710/core.c b/drivers/misc/cb710/core.c new file mode 100644 index 000000000000..b14eab0f2ba5 --- /dev/null +++ b/drivers/misc/cb710/core.c | |||
@@ -0,0 +1,357 @@ | |||
1 | /* | ||
2 | * cb710/core.c | ||
3 | * | ||
4 | * Copyright by Michał Mirosław, 2008-2009 | ||
5 | * | ||
6 | * This program is free software; you can redistribute it and/or modify | ||
7 | * it under the terms of the GNU General Public License version 2 as | ||
8 | * published by the Free Software Foundation. | ||
9 | */ | ||
10 | #include <linux/kernel.h> | ||
11 | #include <linux/module.h> | ||
12 | #include <linux/slab.h> | ||
13 | #include <linux/pci.h> | ||
14 | #include <linux/spinlock.h> | ||
15 | #include <linux/idr.h> | ||
16 | #include <linux/cb710.h> | ||
17 | |||
18 | static DEFINE_IDA(cb710_ida); | ||
19 | static DEFINE_SPINLOCK(cb710_ida_lock); | ||
20 | |||
21 | void cb710_pci_update_config_reg(struct pci_dev *pdev, | ||
22 | int reg, uint32_t mask, uint32_t xor) | ||
23 | { | ||
24 | u32 rval; | ||
25 | |||
26 | pci_read_config_dword(pdev, reg, &rval); | ||
27 | rval = (rval & mask) ^ xor; | ||
28 | pci_write_config_dword(pdev, reg, rval); | ||
29 | } | ||
30 | EXPORT_SYMBOL_GPL(cb710_pci_update_config_reg); | ||
31 | |||
32 | /* Some magic writes based on Windows driver init code */ | ||
33 | static int __devinit cb710_pci_configure(struct pci_dev *pdev) | ||
34 | { | ||
35 | unsigned int devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0); | ||
36 | struct pci_dev *pdev0 = pci_get_slot(pdev->bus, devfn); | ||
37 | u32 val; | ||
38 | |||
39 | cb710_pci_update_config_reg(pdev, 0x48, | ||
40 | ~0x000000FF, 0x0000003F); | ||
41 | |||
42 | pci_read_config_dword(pdev, 0x48, &val); | ||
43 | if (val & 0x80000000) | ||
44 | return 0; | ||
45 | |||
46 | if (!pdev0) | ||
47 | return -ENODEV; | ||
48 | |||
49 | if (pdev0->vendor == PCI_VENDOR_ID_ENE | ||
50 | && pdev0->device == PCI_DEVICE_ID_ENE_720) { | ||
51 | cb710_pci_update_config_reg(pdev0, 0x8C, | ||
52 | ~0x00F00000, 0x00100000); | ||
53 | cb710_pci_update_config_reg(pdev0, 0xB0, | ||
54 | ~0x08000000, 0x08000000); | ||
55 | } | ||
56 | |||
57 | cb710_pci_update_config_reg(pdev0, 0x8C, | ||
58 | ~0x00000F00, 0x00000200); | ||
59 | cb710_pci_update_config_reg(pdev0, 0x90, | ||
60 | ~0x00060000, 0x00040000); | ||
61 | |||
62 | pci_dev_put(pdev0); | ||
63 | |||
64 | return 0; | ||
65 | } | ||
66 | |||
67 | static irqreturn_t cb710_irq_handler(int irq, void *data) | ||
68 | { | ||
69 | struct cb710_chip *chip = data; | ||
70 | struct cb710_slot *slot = &chip->slot[0]; | ||
71 | irqreturn_t handled = IRQ_NONE; | ||
72 | unsigned nr; | ||
73 | |||
74 | spin_lock(&chip->irq_lock); /* incl. smp_rmb() */ | ||
75 | |||
76 | for (nr = chip->slots; nr; ++slot, --nr) { | ||
77 | cb710_irq_handler_t handler_func = slot->irq_handler; | ||
78 | if (handler_func && handler_func(slot)) | ||
79 | handled = IRQ_HANDLED; | ||
80 | } | ||
81 | |||
82 | spin_unlock(&chip->irq_lock); | ||
83 | |||
84 | return handled; | ||
85 | } | ||
86 | |||
87 | static void cb710_release_slot(struct device *dev) | ||
88 | { | ||
89 | #ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS | ||
90 | struct cb710_slot *slot = cb710_pdev_to_slot(to_platform_device(dev)); | ||
91 | struct cb710_chip *chip = cb710_slot_to_chip(slot); | ||
92 | |||
93 | /* slot struct can be freed now */ | ||
94 | atomic_dec(&chip->slot_refs_count); | ||
95 | #endif | ||
96 | } | ||
97 | |||
98 | static int __devinit cb710_register_slot(struct cb710_chip *chip, | ||
99 | unsigned slot_mask, unsigned io_offset, const char *name) | ||
100 | { | ||
101 | int nr = chip->slots; | ||
102 | struct cb710_slot *slot = &chip->slot[nr]; | ||
103 | int err; | ||
104 | |||
105 | dev_dbg(cb710_chip_dev(chip), | ||
106 | "register: %s.%d; slot %d; mask %d; IO offset: 0x%02X\n", | ||
107 | name, chip->platform_id, nr, slot_mask, io_offset); | ||
108 | |||
109 | /* slot->irq_handler == NULL here; this needs to be | ||
110 | * seen before platform_device_register() */ | ||
111 | ++chip->slots; | ||
112 | smp_wmb(); | ||
113 | |||
114 | slot->iobase = chip->iobase + io_offset; | ||
115 | slot->pdev.name = name; | ||
116 | slot->pdev.id = chip->platform_id; | ||
117 | slot->pdev.dev.parent = &chip->pdev->dev; | ||
118 | slot->pdev.dev.release = cb710_release_slot; | ||
119 | |||
120 | err = platform_device_register(&slot->pdev); | ||
121 | |||
122 | #ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS | ||
123 | atomic_inc(&chip->slot_refs_count); | ||
124 | #endif | ||
125 | |||
126 | if (err) { | ||
127 | /* device_initialize() called from platform_device_register() | ||
128 | * wants this on error path */ | ||
129 | platform_device_put(&slot->pdev); | ||
130 | |||
131 | /* slot->irq_handler == NULL here anyway, so no lock needed */ | ||
132 | --chip->slots; | ||
133 | return err; | ||
134 | } | ||
135 | |||
136 | chip->slot_mask |= slot_mask; | ||
137 | |||
138 | return 0; | ||
139 | } | ||
140 | |||
141 | static void cb710_unregister_slot(struct cb710_chip *chip, | ||
142 | unsigned slot_mask) | ||
143 | { | ||
144 | int nr = chip->slots - 1; | ||
145 | |||
146 | if (!(chip->slot_mask & slot_mask)) | ||
147 | return; | ||
148 | |||
149 | platform_device_unregister(&chip->slot[nr].pdev); | ||
150 | |||
151 | /* complementary to spin_unlock() in cb710_set_irq_handler() */ | ||
152 | smp_rmb(); | ||
153 | BUG_ON(chip->slot[nr].irq_handler != NULL); | ||
154 | |||
155 | /* slot->irq_handler == NULL here, so no lock needed */ | ||
156 | --chip->slots; | ||
157 | chip->slot_mask &= ~slot_mask; | ||
158 | } | ||
159 | |||
160 | void cb710_set_irq_handler(struct cb710_slot *slot, | ||
161 | cb710_irq_handler_t handler) | ||
162 | { | ||
163 | struct cb710_chip *chip = cb710_slot_to_chip(slot); | ||
164 | unsigned long flags; | ||
165 | |||
166 | spin_lock_irqsave(&chip->irq_lock, flags); | ||
167 | slot->irq_handler = handler; | ||
168 | spin_unlock_irqrestore(&chip->irq_lock, flags); | ||
169 | } | ||
170 | EXPORT_SYMBOL_GPL(cb710_set_irq_handler); | ||
171 | |||
172 | #ifdef CONFIG_PM | ||
173 | |||
174 | static int cb710_suspend(struct pci_dev *pdev, pm_message_t state) | ||
175 | { | ||
176 | struct cb710_chip *chip = pci_get_drvdata(pdev); | ||
177 | |||
178 | free_irq(pdev->irq, chip); | ||
179 | pci_save_state(pdev); | ||
180 | pci_disable_device(pdev); | ||
181 | if (state.event & PM_EVENT_SLEEP) | ||
182 | pci_set_power_state(pdev, PCI_D3cold); | ||
183 | return 0; | ||
184 | } | ||
185 | |||
186 | static int cb710_resume(struct pci_dev *pdev) | ||
187 | { | ||
188 | struct cb710_chip *chip = pci_get_drvdata(pdev); | ||
189 | int err; | ||
190 | |||
191 | pci_set_power_state(pdev, PCI_D0); | ||
192 | pci_restore_state(pdev); | ||
193 | err = pcim_enable_device(pdev); | ||
194 | if (err) | ||
195 | return err; | ||
196 | |||
197 | return devm_request_irq(&pdev->dev, pdev->irq, | ||
198 | cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip); | ||
199 | } | ||
200 | |||
201 | #endif /* CONFIG_PM */ | ||
202 | |||
203 | static int __devinit cb710_probe(struct pci_dev *pdev, | ||
204 | const struct pci_device_id *ent) | ||
205 | { | ||
206 | struct cb710_chip *chip; | ||
207 | unsigned long flags; | ||
208 | u32 val; | ||
209 | int err; | ||
210 | int n = 0; | ||
211 | |||
212 | err = cb710_pci_configure(pdev); | ||
213 | if (err) | ||
214 | return err; | ||
215 | |||
216 | /* this is actually magic... */ | ||
217 | pci_read_config_dword(pdev, 0x48, &val); | ||
218 | if (!(val & 0x80000000)) { | ||
219 | pci_write_config_dword(pdev, 0x48, val|0x71000000); | ||
220 | pci_read_config_dword(pdev, 0x48, &val); | ||
221 | } | ||
222 | |||
223 | dev_dbg(&pdev->dev, "PCI config[0x48] = 0x%08X\n", val); | ||
224 | if (!(val & 0x70000000)) | ||
225 | return -ENODEV; | ||
226 | val = (val >> 28) & 7; | ||
227 | if (val & CB710_SLOT_MMC) | ||
228 | ++n; | ||
229 | if (val & CB710_SLOT_MS) | ||
230 | ++n; | ||
231 | if (val & CB710_SLOT_SM) | ||
232 | ++n; | ||
233 | |||
234 | chip = devm_kzalloc(&pdev->dev, | ||
235 | sizeof(*chip) + n * sizeof(*chip->slot), GFP_KERNEL); | ||
236 | if (!chip) | ||
237 | return -ENOMEM; | ||
238 | |||
239 | err = pcim_enable_device(pdev); | ||
240 | if (err) | ||
241 | return err; | ||
242 | |||
243 | err = pcim_iomap_regions(pdev, 0x0001, KBUILD_MODNAME); | ||
244 | if (err) | ||
245 | return err; | ||
246 | |||
247 | chip->pdev = pdev; | ||
248 | chip->iobase = pcim_iomap_table(pdev)[0]; | ||
249 | |||
250 | pci_set_drvdata(pdev, chip); | ||
251 | |||
252 | err = devm_request_irq(&pdev->dev, pdev->irq, | ||
253 | cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip); | ||
254 | if (err) | ||
255 | return err; | ||
256 | |||
257 | do { | ||
258 | if (!ida_pre_get(&cb710_ida, GFP_KERNEL)) | ||
259 | return -ENOMEM; | ||
260 | |||
261 | spin_lock_irqsave(&cb710_ida_lock, flags); | ||
262 | err = ida_get_new(&cb710_ida, &chip->platform_id); | ||
263 | spin_unlock_irqrestore(&cb710_ida_lock, flags); | ||
264 | |||
265 | if (err && err != -EAGAIN) | ||
266 | return err; | ||
267 | } while (err); | ||
268 | |||
269 | |||
270 | dev_info(&pdev->dev, "id %d, IO 0x%p, IRQ %d\n", | ||
271 | chip->platform_id, chip->iobase, pdev->irq); | ||
272 | |||
273 | if (val & CB710_SLOT_MMC) { /* MMC/SD slot */ | ||
274 | err = cb710_register_slot(chip, | ||
275 | CB710_SLOT_MMC, 0x00, "cb710-mmc"); | ||
276 | if (err) | ||
277 | return err; | ||
278 | } | ||
279 | |||
280 | if (val & CB710_SLOT_MS) { /* MemoryStick slot */ | ||
281 | err = cb710_register_slot(chip, | ||
282 | CB710_SLOT_MS, 0x40, "cb710-ms"); | ||
283 | if (err) | ||
284 | goto unreg_mmc; | ||
285 | } | ||
286 | |||
287 | if (val & CB710_SLOT_SM) { /* SmartMedia slot */ | ||
288 | err = cb710_register_slot(chip, | ||
289 | CB710_SLOT_SM, 0x60, "cb710-sm"); | ||
290 | if (err) | ||
291 | goto unreg_ms; | ||
292 | } | ||
293 | |||
294 | return 0; | ||
295 | unreg_ms: | ||
296 | cb710_unregister_slot(chip, CB710_SLOT_MS); | ||
297 | unreg_mmc: | ||
298 | cb710_unregister_slot(chip, CB710_SLOT_MMC); | ||
299 | |||
300 | #ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS | ||
301 | BUG_ON(atomic_read(&chip->slot_refs_count) != 0); | ||
302 | #endif | ||
303 | return err; | ||
304 | } | ||
305 | |||
306 | static void __devexit cb710_remove_one(struct pci_dev *pdev) | ||
307 | { | ||
308 | struct cb710_chip *chip = pci_get_drvdata(pdev); | ||
309 | unsigned long flags; | ||
310 | |||
311 | cb710_unregister_slot(chip, CB710_SLOT_SM); | ||
312 | cb710_unregister_slot(chip, CB710_SLOT_MS); | ||
313 | cb710_unregister_slot(chip, CB710_SLOT_MMC); | ||
314 | #ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS | ||
315 | BUG_ON(atomic_read(&chip->slot_refs_count) != 0); | ||
316 | #endif | ||
317 | |||
318 | spin_lock_irqsave(&cb710_ida_lock, flags); | ||
319 | ida_remove(&cb710_ida, chip->platform_id); | ||
320 | spin_unlock_irqrestore(&cb710_ida_lock, flags); | ||
321 | } | ||
322 | |||
323 | static const struct pci_device_id cb710_pci_tbl[] = { | ||
324 | { PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_CB710_FLASH, | ||
325 | PCI_ANY_ID, PCI_ANY_ID, }, | ||
326 | { 0, } | ||
327 | }; | ||
328 | |||
329 | static struct pci_driver cb710_driver = { | ||
330 | .name = KBUILD_MODNAME, | ||
331 | .id_table = cb710_pci_tbl, | ||
332 | .probe = cb710_probe, | ||
333 | .remove = __devexit_p(cb710_remove_one), | ||
334 | #ifdef CONFIG_PM | ||
335 | .suspend = cb710_suspend, | ||
336 | .resume = cb710_resume, | ||
337 | #endif | ||
338 | }; | ||
339 | |||
340 | static int __init cb710_init_module(void) | ||
341 | { | ||
342 | return pci_register_driver(&cb710_driver); | ||
343 | } | ||
344 | |||
345 | static void __exit cb710_cleanup_module(void) | ||
346 | { | ||
347 | pci_unregister_driver(&cb710_driver); | ||
348 | ida_destroy(&cb710_ida); | ||
349 | } | ||
350 | |||
351 | module_init(cb710_init_module); | ||
352 | module_exit(cb710_cleanup_module); | ||
353 | |||
354 | MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>"); | ||
355 | MODULE_DESCRIPTION("ENE CB710 memory card reader driver"); | ||
356 | MODULE_LICENSE("GPL"); | ||
357 | MODULE_DEVICE_TABLE(pci, cb710_pci_tbl); | ||
diff --git a/drivers/misc/cb710/debug.c b/drivers/misc/cb710/debug.c new file mode 100644 index 000000000000..02358d086e03 --- /dev/null +++ b/drivers/misc/cb710/debug.c | |||
@@ -0,0 +1,119 @@ | |||
1 | /* | ||
2 | * cb710/debug.c | ||
3 | * | ||
4 | * Copyright by Michał Mirosław, 2008-2009 | ||
5 | * | ||
6 | * This program is free software; you can redistribute it and/or modify | ||
7 | * it under the terms of the GNU General Public License version 2 as | ||
8 | * published by the Free Software Foundation. | ||
9 | */ | ||
10 | #include <linux/cb710.h> | ||
11 | #include <linux/kernel.h> | ||
12 | #include <linux/module.h> | ||
13 | #include <linux/slab.h> | ||
14 | |||
15 | #define CB710_REG_COUNT 0x80 | ||
16 | |||
17 | static const u16 allow[CB710_REG_COUNT/16] = { | ||
18 | 0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF, | ||
19 | 0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF, | ||
20 | }; | ||
21 | static const char *const prefix[ARRAY_SIZE(allow)] = { | ||
22 | "MMC", "MMC", "MMC", "MMC", | ||
23 | "MS?", "MS?", "SM?", "SM?" | ||
24 | }; | ||
25 | |||
26 | static inline int allow_reg_read(unsigned block, unsigned offset, unsigned bits) | ||
27 | { | ||
28 | unsigned mask = (1 << bits/8) - 1; | ||
29 | offset *= bits/8; | ||
30 | return ((allow[block] >> offset) & mask) == mask; | ||
31 | } | ||
32 | |||
33 | #define CB710_READ_REGS_TEMPLATE(t) \ | ||
34 | static void cb710_read_regs_##t(void __iomem *iobase, \ | ||
35 | u##t *reg, unsigned select) \ | ||
36 | { \ | ||
37 | unsigned i, j; \ | ||
38 | \ | ||
39 | for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) { \ | ||
40 | if (!(select & (1 << i))) \ | ||
41 | continue; \ | ||
42 | \ | ||
43 | for (j = 0; j < 0x10/(t/8); ++j) { \ | ||
44 | if (!allow_reg_read(i, j, t)) \ | ||
45 | continue; \ | ||
46 | reg[j] = ioread##t(iobase \ | ||
47 | + (i << 4) + (j * (t/8))); \ | ||
48 | } \ | ||
49 | } \ | ||
50 | } | ||
51 | |||
52 | static const char cb710_regf_8[] = "%02X"; | ||
53 | static const char cb710_regf_16[] = "%04X"; | ||
54 | static const char cb710_regf_32[] = "%08X"; | ||
55 | static const char cb710_xes[] = "xxxxxxxx"; | ||
56 | |||
57 | #define CB710_DUMP_REGS_TEMPLATE(t) \ | ||
58 | static void cb710_dump_regs_##t(struct device *dev, \ | ||
59 | const u##t *reg, unsigned select) \ | ||
60 | { \ | ||
61 | const char *const xp = &cb710_xes[8 - t/4]; \ | ||
62 | const char *const format = cb710_regf_##t; \ | ||
63 | \ | ||
64 | char msg[100], *p; \ | ||
65 | unsigned i, j; \ | ||
66 | \ | ||
67 | for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) { \ | ||
68 | if (!(select & (1 << i))) \ | ||
69 | continue; \ | ||
70 | p = msg; \ | ||
71 | for (j = 0; j < 0x10/(t/8); ++j) { \ | ||
72 | *p++ = ' '; \ | ||
73 | if (j == 8/(t/8)) \ | ||
74 | *p++ = ' '; \ | ||
75 | if (allow_reg_read(i, j, t)) \ | ||
76 | p += sprintf(p, format, reg[j]); \ | ||
77 | else \ | ||
78 | p += sprintf(p, "%s", xp); \ | ||
79 | } \ | ||
80 | dev_dbg(dev, "%s 0x%02X %s\n", prefix[i], i << 4, msg); \ | ||
81 | } \ | ||
82 | } | ||
83 | |||
84 | #define CB710_READ_AND_DUMP_REGS_TEMPLATE(t) \ | ||
85 | static void cb710_read_and_dump_regs_##t(struct cb710_chip *chip, \ | ||
86 | unsigned select) \ | ||
87 | { \ | ||
88 | u##t regs[CB710_REG_COUNT/sizeof(u##t)]; \ | ||
89 | \ | ||
90 | memset(®s, 0, sizeof(regs)); \ | ||
91 | cb710_read_regs_##t(chip->iobase, regs, select); \ | ||
92 | cb710_dump_regs_##t(cb710_chip_dev(chip), regs, select); \ | ||
93 | } | ||
94 | |||
95 | #define CB710_REG_ACCESS_TEMPLATES(t) \ | ||
96 | CB710_READ_REGS_TEMPLATE(t) \ | ||
97 | CB710_DUMP_REGS_TEMPLATE(t) \ | ||
98 | CB710_READ_AND_DUMP_REGS_TEMPLATE(t) | ||
99 | |||
100 | CB710_REG_ACCESS_TEMPLATES(8) | ||
101 | CB710_REG_ACCESS_TEMPLATES(16) | ||
102 | CB710_REG_ACCESS_TEMPLATES(32) | ||
103 | |||
104 | void cb710_dump_regs(struct cb710_chip *chip, unsigned select) | ||
105 | { | ||
106 | if (!(select & CB710_DUMP_REGS_MASK)) | ||
107 | select = CB710_DUMP_REGS_ALL; | ||
108 | if (!(select & CB710_DUMP_ACCESS_MASK)) | ||
109 | select |= CB710_DUMP_ACCESS_8; | ||
110 | |||
111 | if (select & CB710_DUMP_ACCESS_32) | ||
112 | cb710_read_and_dump_regs_32(chip, select); | ||
113 | if (select & CB710_DUMP_ACCESS_16) | ||
114 | cb710_read_and_dump_regs_16(chip, select); | ||
115 | if (select & CB710_DUMP_ACCESS_8) | ||
116 | cb710_read_and_dump_regs_8(chip, select); | ||
117 | } | ||
118 | EXPORT_SYMBOL_GPL(cb710_dump_regs); | ||
119 | |||
diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c new file mode 100644 index 000000000000..d38a7acdb6ec --- /dev/null +++ b/drivers/misc/cb710/sgbuf2.c | |||
@@ -0,0 +1,150 @@ | |||
1 | /* | ||
2 | * cb710/sgbuf2.c | ||
3 | * | ||
4 | * Copyright by Michał Mirosław, 2008-2009 | ||
5 | * | ||
6 | * This program is free software; you can redistribute it and/or modify | ||
7 | * it under the terms of the GNU General Public License version 2 as | ||
8 | * published by the Free Software Foundation. | ||
9 | */ | ||
10 | #include <linux/kernel.h> | ||
11 | #include <linux/module.h> | ||
12 | #include <linux/cb710.h> | ||
13 | |||
14 | static bool sg_dwiter_next(struct sg_mapping_iter *miter) | ||
15 | { | ||
16 | if (sg_miter_next(miter)) { | ||
17 | miter->consumed = 0; | ||
18 | return true; | ||
19 | } else | ||
20 | return false; | ||
21 | } | ||
22 | |||
23 | static bool sg_dwiter_is_at_end(struct sg_mapping_iter *miter) | ||
24 | { | ||
25 | return miter->length == miter->consumed && !sg_dwiter_next(miter); | ||
26 | } | ||
27 | |||
28 | static uint32_t sg_dwiter_read_buffer(struct sg_mapping_iter *miter) | ||
29 | { | ||
30 | size_t len, left = 4; | ||
31 | uint32_t data; | ||
32 | void *addr = &data; | ||
33 | |||
34 | do { | ||
35 | len = min(miter->length - miter->consumed, left); | ||
36 | memcpy(addr, miter->addr + miter->consumed, len); | ||
37 | miter->consumed += len; | ||
38 | left -= len; | ||
39 | if (!left) | ||
40 | return data; | ||
41 | addr += len; | ||
42 | } while (sg_dwiter_next(miter)); | ||
43 | |||
44 | memset(addr, 0, left); | ||
45 | return data; | ||
46 | } | ||
47 | |||
48 | static inline bool needs_unaligned_copy(const void *ptr) | ||
49 | { | ||
50 | #ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS | ||
51 | return false; | ||
52 | #else | ||
53 | return ((ptr - NULL) & 3) != 0; | ||
54 | #endif | ||
55 | } | ||
56 | |||
57 | static bool sg_dwiter_get_next_block(struct sg_mapping_iter *miter, uint32_t **ptr) | ||
58 | { | ||
59 | size_t len; | ||
60 | |||
61 | if (sg_dwiter_is_at_end(miter)) | ||
62 | return true; | ||
63 | |||
64 | len = miter->length - miter->consumed; | ||
65 | |||
66 | if (likely(len >= 4 && !needs_unaligned_copy( | ||
67 | miter->addr + miter->consumed))) { | ||
68 | *ptr = miter->addr + miter->consumed; | ||
69 | miter->consumed += 4; | ||
70 | return true; | ||
71 | } | ||
72 | |||
73 | return false; | ||
74 | } | ||
75 | |||
76 | /** | ||
77 | * cb710_sg_dwiter_read_next_block() - get next 32-bit word from sg buffer | ||
78 | * @miter: sg mapping iterator used for reading | ||
79 | * | ||
80 | * Description: | ||
81 | * Returns 32-bit word starting at byte pointed to by @miter@ | ||
82 | * handling any alignment issues. Bytes past the buffer's end | ||
83 | * are not accessed (read) but are returned as zeroes. @miter@ | ||
84 | * is advanced by 4 bytes or to the end of buffer whichever is | ||
85 | * closer. | ||
86 | * | ||
87 | * Context: | ||
88 | * Same requirements as in sg_miter_next(). | ||
89 | * | ||
90 | * Returns: | ||
91 | * 32-bit word just read. | ||
92 | */ | ||
93 | uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter) | ||
94 | { | ||
95 | uint32_t *ptr = NULL; | ||
96 | |||
97 | if (likely(sg_dwiter_get_next_block(miter, &ptr))) | ||
98 | return ptr ? *ptr : 0; | ||
99 | |||
100 | return sg_dwiter_read_buffer(miter); | ||
101 | } | ||
102 | EXPORT_SYMBOL_GPL(cb710_sg_dwiter_read_next_block); | ||
103 | |||
104 | static void sg_dwiter_write_slow(struct sg_mapping_iter *miter, uint32_t data) | ||
105 | { | ||
106 | size_t len, left = 4; | ||
107 | void *addr = &data; | ||
108 | |||
109 | do { | ||
110 | len = min(miter->length - miter->consumed, left); | ||
111 | memcpy(miter->addr, addr, len); | ||
112 | miter->consumed += len; | ||
113 | left -= len; | ||
114 | if (!left) | ||
115 | return; | ||
116 | addr += len; | ||
117 | flush_kernel_dcache_page(miter->page); | ||
118 | } while (sg_dwiter_next(miter)); | ||
119 | } | ||
120 | |||
121 | /** | ||
122 | * cb710_sg_dwiter_write_next_block() - write next 32-bit word to sg buffer | ||
123 | * @miter: sg mapping iterator used for writing | ||
124 | * | ||
125 | * Description: | ||
126 | * Writes 32-bit word starting at byte pointed to by @miter@ | ||
127 | * handling any alignment issues. Bytes which would be written | ||
128 | * past the buffer's end are silently discarded. @miter@ is | ||
129 | * advanced by 4 bytes or to the end of buffer whichever is closer. | ||
130 | * | ||
131 | * Context: | ||
132 | * Same requirements as in sg_miter_next(). | ||
133 | */ | ||
134 | void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data) | ||
135 | { | ||
136 | uint32_t *ptr = NULL; | ||
137 | |||
138 | if (likely(sg_dwiter_get_next_block(miter, &ptr))) { | ||
139 | if (ptr) | ||
140 | *ptr = data; | ||
141 | else | ||
142 | return; | ||
143 | } else | ||
144 | sg_dwiter_write_slow(miter, data); | ||
145 | |||
146 | if (miter->length == miter->consumed) | ||
147 | flush_kernel_dcache_page(miter->page); | ||
148 | } | ||
149 | EXPORT_SYMBOL_GPL(cb710_sg_dwiter_write_next_block); | ||
150 | |||
diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c index 3cf61ece71d7..348443bdb23b 100644 --- a/drivers/misc/enclosure.c +++ b/drivers/misc/enclosure.c | |||
@@ -119,7 +119,7 @@ enclosure_register(struct device *dev, const char *name, int components, | |||
119 | edev->edev.class = &enclosure_class; | 119 | edev->edev.class = &enclosure_class; |
120 | edev->edev.parent = get_device(dev); | 120 | edev->edev.parent = get_device(dev); |
121 | edev->cb = cb; | 121 | edev->cb = cb; |
122 | dev_set_name(&edev->edev, name); | 122 | dev_set_name(&edev->edev, "%s", name); |
123 | err = device_register(&edev->edev); | 123 | err = device_register(&edev->edev); |
124 | if (err) | 124 | if (err) |
125 | goto err; | 125 | goto err; |
@@ -255,8 +255,8 @@ enclosure_component_register(struct enclosure_device *edev, | |||
255 | ecomp->number = number; | 255 | ecomp->number = number; |
256 | cdev = &ecomp->cdev; | 256 | cdev = &ecomp->cdev; |
257 | cdev->parent = get_device(&edev->edev); | 257 | cdev->parent = get_device(&edev->edev); |
258 | if (name) | 258 | if (name && name[0]) |
259 | dev_set_name(cdev, name); | 259 | dev_set_name(cdev, "%s", name); |
260 | else | 260 | else |
261 | dev_set_name(cdev, "%u", number); | 261 | dev_set_name(cdev, "%u", number); |
262 | 262 | ||