diff options
Diffstat (limited to 'drivers/misc')
-rw-r--r-- | drivers/misc/Kconfig | 10 | ||||
-rw-r--r-- | drivers/misc/Makefile | 1 | ||||
-rw-r--r-- | drivers/misc/isl29020.c | 248 |
3 files changed, 259 insertions, 0 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 7362851a2ca8..477a9434b9c0 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig | |||
@@ -295,6 +295,16 @@ config ISL29003 | |||
295 | This driver can also be built as a module. If so, the module | 295 | This driver can also be built as a module. If so, the module |
296 | will be called isl29003. | 296 | will be called isl29003. |
297 | 297 | ||
298 | config ISL29020 | ||
299 | tristate "Intersil ISL29020 ambient light sensor" | ||
300 | depends on I2C | ||
301 | help | ||
302 | If you say yes here you get support for the Intersil ISL29020 | ||
303 | ambient light sensor. | ||
304 | |||
305 | This driver can also be built as a module. If so, the module | ||
306 | will be called isl29020. | ||
307 | |||
298 | config SENSORS_TSL2550 | 308 | config SENSORS_TSL2550 |
299 | tristate "Taos TSL2550 ambient light sensor" | 309 | tristate "Taos TSL2550 ambient light sensor" |
300 | depends on I2C && SYSFS | 310 | depends on I2C && SYSFS |
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 081b9fca8a06..2ecdd32d1357 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile | |||
@@ -26,6 +26,7 @@ obj-$(CONFIG_SGI_GRU) += sgi-gru/ | |||
26 | obj-$(CONFIG_CS5535_MFGPT) += cs5535-mfgpt.o | 26 | obj-$(CONFIG_CS5535_MFGPT) += cs5535-mfgpt.o |
27 | obj-$(CONFIG_HP_ILO) += hpilo.o | 27 | obj-$(CONFIG_HP_ILO) += hpilo.o |
28 | obj-$(CONFIG_ISL29003) += isl29003.o | 28 | obj-$(CONFIG_ISL29003) += isl29003.o |
29 | obj-$(CONFIG_ISL29020) += isl29020.o | ||
29 | obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o | 30 | obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o |
30 | obj-$(CONFIG_EP93XX_PWM) += ep93xx_pwm.o | 31 | obj-$(CONFIG_EP93XX_PWM) += ep93xx_pwm.o |
31 | obj-$(CONFIG_DS1682) += ds1682.o | 32 | obj-$(CONFIG_DS1682) += ds1682.o |
diff --git a/drivers/misc/isl29020.c b/drivers/misc/isl29020.c new file mode 100644 index 000000000000..34fe835921c4 --- /dev/null +++ b/drivers/misc/isl29020.c | |||
@@ -0,0 +1,248 @@ | |||
1 | /* | ||
2 | * isl29020.c - Intersil ALS Driver | ||
3 | * | ||
4 | * Copyright (C) 2008 Intel Corp | ||
5 | * | ||
6 | * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | ||
7 | * | ||
8 | * This program is free software; you can redistribute it and/or modify | ||
9 | * it under the terms of the GNU General Public License as published by | ||
10 | * the Free Software Foundation; version 2 of the License. | ||
11 | * | ||
12 | * This program is distributed in the hope that it will be useful, but | ||
13 | * WITHOUT ANY WARRANTY; without even the implied warranty of | ||
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | ||
15 | * General Public License for more details. | ||
16 | * | ||
17 | * You should have received a copy of the GNU General Public License along | ||
18 | * with this program; if not, write to the Free Software Foundation, Inc., | ||
19 | * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. | ||
20 | * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | ||
21 | * | ||
22 | * Data sheet at: http://www.intersil.com/data/fn/fn6505.pdf | ||
23 | */ | ||
24 | |||
25 | #include <linux/module.h> | ||
26 | #include <linux/init.h> | ||
27 | #include <linux/slab.h> | ||
28 | #include <linux/i2c.h> | ||
29 | #include <linux/err.h> | ||
30 | #include <linux/delay.h> | ||
31 | #include <linux/sysfs.h> | ||
32 | #include <linux/pm_runtime.h> | ||
33 | |||
34 | static DEFINE_MUTEX(mutex); | ||
35 | |||
36 | static ssize_t als_sensing_range_show(struct device *dev, | ||
37 | struct device_attribute *attr, char *buf) | ||
38 | { | ||
39 | struct i2c_client *client = to_i2c_client(dev); | ||
40 | int val; | ||
41 | |||
42 | val = i2c_smbus_read_byte_data(client, 0x00); | ||
43 | |||
44 | if (val < 0) | ||
45 | return val; | ||
46 | return sprintf(buf, "%d000\n", 1 << (2 * (val & 3))); | ||
47 | |||
48 | } | ||
49 | |||
50 | static ssize_t als_lux_input_data_show(struct device *dev, | ||
51 | struct device_attribute *attr, char *buf) | ||
52 | { | ||
53 | struct i2c_client *client = to_i2c_client(dev); | ||
54 | int ret_val, val; | ||
55 | unsigned long int lux; | ||
56 | int temp; | ||
57 | |||
58 | pm_runtime_get_sync(dev); | ||
59 | msleep(100); | ||
60 | |||
61 | mutex_lock(&mutex); | ||
62 | temp = i2c_smbus_read_byte_data(client, 0x02); /* MSB data */ | ||
63 | if (temp < 0) { | ||
64 | pm_runtime_put_sync(dev); | ||
65 | mutex_unlock(&mutex); | ||
66 | return temp; | ||
67 | } | ||
68 | |||
69 | ret_val = i2c_smbus_read_byte_data(client, 0x01); /* LSB data */ | ||
70 | mutex_unlock(&mutex); | ||
71 | |||
72 | if (ret_val < 0) { | ||
73 | pm_runtime_put_sync(dev); | ||
74 | return ret_val; | ||
75 | } | ||
76 | |||
77 | ret_val |= temp << 8; | ||
78 | val = i2c_smbus_read_byte_data(client, 0x00); | ||
79 | pm_runtime_put_sync(dev); | ||
80 | if (val < 0) | ||
81 | return val; | ||
82 | lux = ((((1 << (2 * (val & 3))))*1000) * ret_val) / 65536; | ||
83 | return sprintf(buf, "%ld\n", lux); | ||
84 | } | ||
85 | |||
86 | static ssize_t als_sensing_range_store(struct device *dev, | ||
87 | struct device_attribute *attr, const char *buf, size_t count) | ||
88 | { | ||
89 | struct i2c_client *client = to_i2c_client(dev); | ||
90 | unsigned int ret_val; | ||
91 | unsigned long val; | ||
92 | |||
93 | if (strict_strtoul(buf, 10, &val)) | ||
94 | return -EINVAL; | ||
95 | if (val < 1 || val > 64000) | ||
96 | return -EINVAL; | ||
97 | |||
98 | /* Pick the smallest sensor range that will meet our requirements */ | ||
99 | if (val <= 1000) | ||
100 | val = 1; | ||
101 | else if (val <= 4000) | ||
102 | val = 2; | ||
103 | else if (val <= 16000) | ||
104 | val = 3; | ||
105 | else | ||
106 | val = 4; | ||
107 | |||
108 | ret_val = i2c_smbus_read_byte_data(client, 0x00); | ||
109 | |||
110 | ret_val &= 0xFC; /*reset the bit before setting them */ | ||
111 | ret_val |= val - 1; | ||
112 | ret_val = i2c_smbus_write_byte_data(client, 0x00, ret_val); | ||
113 | |||
114 | if (ret_val < 0) | ||
115 | return ret_val; | ||
116 | return count; | ||
117 | } | ||
118 | |||
119 | static void als_set_power_state(struct i2c_client *client, int enable) | ||
120 | { | ||
121 | int ret_val; | ||
122 | |||
123 | ret_val = i2c_smbus_read_byte_data(client, 0x00); | ||
124 | if (ret_val < 0) | ||
125 | return; | ||
126 | |||
127 | if (enable) | ||
128 | ret_val |= 0x80; | ||
129 | else | ||
130 | ret_val &= 0x7F; | ||
131 | |||
132 | i2c_smbus_write_byte_data(client, 0x00, ret_val); | ||
133 | } | ||
134 | |||
135 | static DEVICE_ATTR(lux0_sensor_range, S_IRUGO | S_IWUSR, | ||
136 | als_sensing_range_show, als_sensing_range_store); | ||
137 | static DEVICE_ATTR(lux0_input, S_IRUGO, als_lux_input_data_show, NULL); | ||
138 | |||
139 | static struct attribute *mid_att_als[] = { | ||
140 | &dev_attr_lux0_sensor_range.attr, | ||
141 | &dev_attr_lux0_input.attr, | ||
142 | NULL | ||
143 | }; | ||
144 | |||
145 | static struct attribute_group m_als_gr = { | ||
146 | .name = "isl29020", | ||
147 | .attrs = mid_att_als | ||
148 | }; | ||
149 | |||
150 | static int als_set_default_config(struct i2c_client *client) | ||
151 | { | ||
152 | int retval; | ||
153 | |||
154 | retval = i2c_smbus_write_byte_data(client, 0x00, 0xc0); | ||
155 | if (retval < 0) { | ||
156 | dev_err(&client->dev, "default write failed."); | ||
157 | return retval; | ||
158 | } | ||
159 | return 0;; | ||
160 | } | ||
161 | |||
162 | static int isl29020_probe(struct i2c_client *client, | ||
163 | const struct i2c_device_id *id) | ||
164 | { | ||
165 | int res; | ||
166 | |||
167 | res = als_set_default_config(client); | ||
168 | if (res < 0) | ||
169 | return res; | ||
170 | |||
171 | res = sysfs_create_group(&client->dev.kobj, &m_als_gr); | ||
172 | if (res) { | ||
173 | dev_err(&client->dev, "isl29020: device create file failed\n"); | ||
174 | return res; | ||
175 | } | ||
176 | dev_info(&client->dev, "%s isl29020: ALS chip found\n", client->name); | ||
177 | als_set_power_state(client, 0); | ||
178 | pm_runtime_enable(&client->dev); | ||
179 | return res; | ||
180 | } | ||
181 | |||
182 | static int isl29020_remove(struct i2c_client *client) | ||
183 | { | ||
184 | struct als_data *data = i2c_get_clientdata(client); | ||
185 | sysfs_remove_group(&client->dev.kobj, &m_als_gr); | ||
186 | kfree(data); | ||
187 | return 0; | ||
188 | } | ||
189 | |||
190 | static struct i2c_device_id isl29020_id[] = { | ||
191 | { "isl29020", 0 }, | ||
192 | { } | ||
193 | }; | ||
194 | |||
195 | MODULE_DEVICE_TABLE(i2c, isl29020_id); | ||
196 | |||
197 | #ifdef CONFIG_PM | ||
198 | |||
199 | static int isl29020_runtime_suspend(struct device *dev) | ||
200 | { | ||
201 | struct i2c_client *client = to_i2c_client(dev); | ||
202 | als_set_power_state(client, 0); | ||
203 | return 0; | ||
204 | } | ||
205 | |||
206 | static int isl29020_runtime_resume(struct device *dev) | ||
207 | { | ||
208 | struct i2c_client *client = to_i2c_client(dev); | ||
209 | als_set_power_state(client, 1); | ||
210 | return 0; | ||
211 | } | ||
212 | |||
213 | static const struct dev_pm_ops isl29020_pm_ops = { | ||
214 | .runtime_suspend = isl29020_runtime_suspend, | ||
215 | .runtime_resume = isl29020_runtime_resume, | ||
216 | }; | ||
217 | |||
218 | #define ISL29020_PM_OPS (&isl29020_pm_ops) | ||
219 | #else /* CONFIG_PM */ | ||
220 | #define ISL29020_PM_OPS NULL | ||
221 | #endif /* CONFIG_PM */ | ||
222 | |||
223 | static struct i2c_driver isl29020_driver = { | ||
224 | .driver = { | ||
225 | .name = "isl29020", | ||
226 | .pm = ISL29020_PM_OPS, | ||
227 | }, | ||
228 | .probe = isl29020_probe, | ||
229 | .remove = isl29020_remove, | ||
230 | .id_table = isl29020_id, | ||
231 | }; | ||
232 | |||
233 | static int __init sensor_isl29020_init(void) | ||
234 | { | ||
235 | return i2c_add_driver(&isl29020_driver); | ||
236 | } | ||
237 | |||
238 | static void __exit sensor_isl29020_exit(void) | ||
239 | { | ||
240 | i2c_del_driver(&isl29020_driver); | ||
241 | } | ||
242 | |||
243 | module_init(sensor_isl29020_init); | ||
244 | module_exit(sensor_isl29020_exit); | ||
245 | |||
246 | MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com"); | ||
247 | MODULE_DESCRIPTION("Intersil isl29020 ALS Driver"); | ||
248 | MODULE_LICENSE("GPL v2"); | ||