1 files changed, 59 insertions, 0 deletions

diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
new file mode 100644
index 000000000000..c76df8cda5ef
--- /dev/null
+++ b/drivers/misc/eeprom/Kconfig
@@ -0,0 +1,59 @@
+menu "EEPROM support"
+
+config EEPROM_AT24
+        tristate "I2C EEPROMs from most vendors"
+        depends on I2C && SYSFS && EXPERIMENTAL
+        help
+          Enable this driver to get read/write support to most I2C EEPROMs,
+          after you configure the driver to know about each EEPROM on
+          your target board.  Use these generic chip names, instead of
+          vendor-specific ones like at24c64 or 24lc02:
+
+             24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
+             24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
+
+          Unless you like data loss puzzles, always be sure that any chip
+          you configure as a 24c32 (32 kbit) or larger is NOT really a
+          24c16 (16 kbit) or smaller, and vice versa. Marking the chip
+          as read-only won't help recover from this. Also, if your chip
+          has any software write-protect mechanism you may want to review the
+          code to make sure this driver won't turn it on by accident.
+
+          If you use this with an SMBus adapter instead of an I2C adapter,
+          full functionality is not available.  Only smaller devices are
+          supported (24c16 and below, max 4 kByte).
+
+          This driver can also be built as a module.  If so, the module
+          will be called at24.
+
+config EEPROM_AT25
+        tristate "SPI EEPROMs from most vendors"
+        depends on SPI && SYSFS
+        help
+          Enable this driver to get read/write support to most SPI EEPROMs,
+          after you configure the board init code to know about each eeprom
+          on your target board.
+
+          This driver can also be built as a module.  If so, the module
+          will be called at25.
+
+config EEPROM_LEGACY
+        tristate "Old I2C EEPROM reader"
+        depends on I2C && SYSFS
+        help
+          If you say yes here you get read-only access to the EEPROM data
+          available on modern memory DIMMs and Sony Vaio laptops via I2C. Such
+          EEPROMs could theoretically be available on other devices as well.
+
+          This driver can also be built as a module.  If so, the module
+          will be called eeprom.
+
+config EEPROM_93CX6
+        tristate "EEPROM 93CX6 support"
+        help
+          This is a driver for the EEPROM chipsets 93c46 and 93c66.
+          The driver supports both read as well as write commands.
+
+          If unsure, say N.
+
+endmenu