1 files changed, 74 insertions, 1 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 9da0e504bbe9..db51ea1c6082 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -7,7 +7,16 @@ menuconfig MFD_SUPPORT
         depends on HAS_IOMEM
         default y
         help
-          Configure MFD device drivers.
+          Multifunction devices embed several functions (e.g. GPIOs,
+          touchscreens, keyboards, current regulators, power management chips,
+          etc...) in one single integrated circuit. They usually talk to the
+          main CPU through one or more IRQ lines and low speed data busses (SPI,
+          I2C, etc..). They appear as one single device to the main system
+          through the data bus and the MFD framework allows for sub devices
+          (a.k.a. functions) to appear as discrete platform devices.
+          MFDs are typically found on embedded platforms.
+
+          This option alone does not add any kernel code.
 
 if MFD_SUPPORT
 
@@ -177,6 +186,38 @@ config TWL4030_CODEC
         select MFD_CORE
         default n
 
+config TWL6030_PWM
+        tristate "TWL6030 PWM (Pulse Width Modulator) Support"
+        depends on TWL4030_CORE
+        select HAVE_PWM
+        default n
+        help
+          Say yes here if you want support for TWL6030 PWM.
+          This is used to control charging LED brightness.
+
+config MFD_STMPE
+        bool "Support STMicroelectronics STMPE"
+        depends on I2C=y && GENERIC_HARDIRQS
+        select MFD_CORE
+        help
+          Support for the STMPE family of I/O Expanders from
+          STMicroelectronics.
+
+          Currently supported devices are:
+
+                STMPE811: GPIO, Touchscreen
+                STMPE1601: GPIO, Keypad
+                STMPE2401: GPIO, Keypad
+                STMPE2403: GPIO, Keypad
+
+          This driver provides common support for accessing the device,
+          additional drivers must be enabled in order to use the functionality
+          of the device.  Currently available sub drivers are:
+
+                GPIO: stmpe-gpio
+                Keypad: stmpe-keypad
+                Touchscreen: stmpe-ts
+
 config MFD_TC35892
         bool "Support Toshiba TC35892"
         depends on I2C=y && GENERIC_HARDIRQS
@@ -252,6 +293,16 @@ config MFD_MAX8925
           accessing the device, additional drivers must be enabled in order
           to use the functionality of the device.
 
+config MFD_MAX8998
+        bool "Maxim Semiconductor MAX8998 PMIC Support"
+        depends on I2C=y
+        select MFD_CORE
+        help
+          Say yes here to support for Maxim Semiconductor MAX8998. This is
+          a Power Management IC. This driver provies common support for
+          accessing the device, additional drivers must be enabled in order
+          to use the functionality of the device.
+
 config MFD_WM8400
         tristate "Support Wolfson Microelectronics WM8400"
         select MFD_CORE
@@ -482,6 +533,28 @@ config MFD_JANZ_CMODIO
           host many different types of MODULbus daughterboards, including
           CAN and GPIO controllers.
 
+config MFD_JZ4740_ADC
+        tristate "Support for the JZ4740 SoC ADC core"
+        select MFD_CORE
+        depends on MACH_JZ4740
+        help
+          Say yes here if you want support for the ADC unit in the JZ4740 SoC.
+          This driver is necessary for jz4740-battery and jz4740-hwmon driver.
+
+config MFD_TPS6586X
+        tristate "TPS6586x Power Management chips"
+        depends on I2C && GPIOLIB
+        select MFD_CORE
+        help
+          If you say yes here you get support for the TPS6586X series of
+          Power Management chips.
+          This driver provides common support for accessing the device,
+          additional drivers must be enabled in order to use the
+          functionality of the device.
+
+          This driver can also be built as a module.  If so, the module
+          will be called tps6586x.
+
 endif # MFD_SUPPORT
 
 menu "Multimedia Capabilities Port drivers"