aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/message
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/message')
-rw-r--r--drivers/message/fusion/lsi/fc_log.h89
-rw-r--r--drivers/message/fusion/lsi/mpi.h5
-rw-r--r--drivers/message/fusion/lsi/mpi_cnfg.h158
-rw-r--r--drivers/message/fusion/lsi/mpi_history.txt76
-rw-r--r--drivers/message/fusion/lsi/mpi_init.h4
-rw-r--r--drivers/message/fusion/lsi/mpi_ioc.h154
-rw-r--r--drivers/message/fusion/lsi/mpi_log_sas.h82
-rw-r--r--drivers/message/fusion/lsi/mpi_sas.h13
-rw-r--r--drivers/message/fusion/lsi/mpi_targ.h5
9 files changed, 413 insertions, 173 deletions
diff --git a/drivers/message/fusion/lsi/fc_log.h b/drivers/message/fusion/lsi/fc_log.h
deleted file mode 100644
index dc98d46f9071..000000000000
--- a/drivers/message/fusion/lsi/fc_log.h
+++ /dev/null
@@ -1,89 +0,0 @@
1/*
2 * Copyright (c) 2000-2001 LSI Logic Corporation. All rights reserved.
3 *
4 * NAME: fc_log.h
5 * SUMMARY: MPI IocLogInfo definitions for the SYMFC9xx chips
6 * DESCRIPTION: Contains the enumerated list of values that may be returned
7 * in the IOCLogInfo field of a MPI Default Reply Message.
8 *
9 * CREATION DATE: 6/02/2000
10 * ID: $Id: fc_log.h,v 4.6 2001/07/26 14:41:33 sschremm Exp $
11 */
12
13
14/*
15 * MpiIocLogInfo_t enum
16 *
17 * These 32 bit values are used in the IOCLogInfo field of the MPI reply
18 * messages.
19 * The value is 0xabcccccc where
20 * a = The type of log info as per the MPI spec. Since these codes are
21 * all for Fibre Channel this value will always be 2.
22 * b = Specifies a subclass of the firmware where
23 * 0 = FCP Initiator
24 * 1 = FCP Target
25 * 2 = LAN
26 * 3 = MPI Message Layer
27 * 4 = FC Link
28 * 5 = Context Manager
29 * 6 = Invalid Field Offset
30 * 7 = State Change Info
31 * all others are reserved for future use
32 * c = A specific value within the subclass.
33 *
34 * NOTE: Any new values should be added to the end of each subclass so that the
35 * codes remain consistent across firmware releases.
36 */
37typedef enum _MpiIocLogInfoFc
38{
39 MPI_IOCLOGINFO_FC_INIT_BASE = 0x20000000,
40 MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */
41 MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */
42 MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME = 0x20000003, /* Bad Rx Frame, bad end of frame primative */
43 MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN = 0x20000004, /* Bad Rx Frame, overrun */
44 MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER = 0x20000005, /* Other errors caught by IOC which require retries */
45 MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD = 0x20000006, /* Main processor could not initialize sub-processor */
46 MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OVERRUN = 0x20000007, /* Scatter Gather overrun */
47 MPI_IOCLOGINFO_FC_INIT_ERROR_RX_BAD_STATUS = 0x20000008, /* Receiver detected context mismatch via invalid header */
48 MPI_IOCLOGINFO_FC_INIT_ERROR_RX_UNEXPECTED_FRAME= 0x20000009, /* CtxMgr detected unsupported frame type */
49 MPI_IOCLOGINFO_FC_INIT_ERROR_LINK_FAILURE = 0x2000000A, /* Link failure occurred */
50 MPI_IOCLOGINFO_FC_INIT_ERROR_TX_TIMEOUT = 0x2000000B, /* Transmitter timeout error */
51
52 MPI_IOCLOGINFO_FC_TARGET_BASE = 0x21000000,
53 MPI_IOCLOGINFO_FC_TARGET_NO_PDISC = 0x21000001, /* not sent because we are waiting for a PDISC from the initiator */
54 MPI_IOCLOGINFO_FC_TARGET_NO_LOGIN = 0x21000002, /* not sent because we are not logged in to the remote node */
55 MPI_IOCLOGINFO_FC_TARGET_DOAR_KILLED_BY_LIP = 0x21000003, /* Data Out, Auto Response, not sent due to a LIP */
56 MPI_IOCLOGINFO_FC_TARGET_DIAR_KILLED_BY_LIP = 0x21000004, /* Data In, Auto Response, not sent due to a LIP */
57 MPI_IOCLOGINFO_FC_TARGET_DIAR_MISSING_DATA = 0x21000005, /* Data In, Auto Response, missing data frames */
58 MPI_IOCLOGINFO_FC_TARGET_DONR_KILLED_BY_LIP = 0x21000006, /* Data Out, No Response, not sent due to a LIP */
59 MPI_IOCLOGINFO_FC_TARGET_WRSP_KILLED_BY_LIP = 0x21000007, /* Auto-response after a write not sent due to a LIP */
60 MPI_IOCLOGINFO_FC_TARGET_DINR_KILLED_BY_LIP = 0x21000008, /* Data In, No Response, not completed due to a LIP */
61 MPI_IOCLOGINFO_FC_TARGET_DINR_MISSING_DATA = 0x21000009, /* Data In, No Response, missing data frames */
62 MPI_IOCLOGINFO_FC_TARGET_MRSP_KILLED_BY_LIP = 0x2100000a, /* Manual Response not sent due to a LIP */
63 MPI_IOCLOGINFO_FC_TARGET_NO_CLASS_3 = 0x2100000b, /* not sent because remote node does not support Class 3 */
64 MPI_IOCLOGINFO_FC_TARGET_LOGIN_NOT_VALID = 0x2100000c, /* not sent because login to remote node not validated */
65 MPI_IOCLOGINFO_FC_TARGET_FROM_OUTBOUND = 0x2100000e, /* cleared from the outbound queue after a logout */
66 MPI_IOCLOGINFO_FC_TARGET_WAITING_FOR_DATA_IN = 0x2100000f, /* cleared waiting for data after a logout */
67
68 MPI_IOCLOGINFO_FC_LAN_BASE = 0x22000000,
69 MPI_IOCLOGINFO_FC_LAN_TRANS_SGL_MISSING = 0x22000001, /* Transaction Context Sgl Missing */
70 MPI_IOCLOGINFO_FC_LAN_TRANS_WRONG_PLACE = 0x22000002, /* Transaction Context found before an EOB */
71 MPI_IOCLOGINFO_FC_LAN_TRANS_RES_BITS_SET = 0x22000003, /* Transaction Context value has reserved bits set */
72 MPI_IOCLOGINFO_FC_LAN_WRONG_SGL_FLAG = 0x22000004, /* Invalid SGL Flags */
73
74 MPI_IOCLOGINFO_FC_MSG_BASE = 0x23000000,
75
76 MPI_IOCLOGINFO_FC_LINK_BASE = 0x24000000,
77 MPI_IOCLOGINFO_FC_LINK_LOOP_INIT_TIMEOUT = 0x24000001, /* Loop initialization timed out */
78 MPI_IOCLOGINFO_FC_LINK_ALREADY_INITIALIZED = 0x24000002, /* Another system controller already initialized the loop */
79 MPI_IOCLOGINFO_FC_LINK_LINK_NOT_ESTABLISHED = 0x24000003, /* Not synchronized to signal or still negotiating (possible cable problem) */
80 MPI_IOCLOGINFO_FC_LINK_CRC_ERROR = 0x24000004, /* CRC check detected error on received frame */
81
82 MPI_IOCLOGINFO_FC_CTX_BASE = 0x25000000,
83
84 MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET = 0x26000000, /* The lower 24 bits give the byte offset of the field in the request message that is invalid */
85 MPI_IOCLOGINFO_FC_INVALID_FIELD_MAX_OFFSET = 0x26ffffff,
86
87 MPI_IOCLOGINFO_FC_STATE_CHANGE = 0x27000000 /* The lower 24 bits give additional information concerning state change */
88
89} MpiIocLogInfoFc_t;
diff --git a/drivers/message/fusion/lsi/mpi.h b/drivers/message/fusion/lsi/mpi.h
index 02cdc840a06b..81ad77622dac 100644
--- a/drivers/message/fusion/lsi/mpi.h
+++ b/drivers/message/fusion/lsi/mpi.h
@@ -6,7 +6,7 @@
6 * Title: MPI Message independent structures and definitions 6 * Title: MPI Message independent structures and definitions
7 * Creation Date: July 27, 2000 7 * Creation Date: July 27, 2000
8 * 8 *
9 * mpi.h Version: 01.05.10 9 * mpi.h Version: 01.05.11
10 * 10 *
11 * Version History 11 * Version History
12 * --------------- 12 * ---------------
@@ -76,6 +76,7 @@
76 * Added EEDP IOCStatus codes. 76 * Added EEDP IOCStatus codes.
77 * 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT. 77 * 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT.
78 * 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target. 78 * 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target.
79 * 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT.
79 * -------------------------------------------------------------------------- 80 * --------------------------------------------------------------------------
80 */ 81 */
81 82
@@ -106,7 +107,7 @@
106/* Note: The major versions of 0xe0 through 0xff are reserved */ 107/* Note: The major versions of 0xe0 through 0xff are reserved */
107 108
108/* versioning for this MPI header set */ 109/* versioning for this MPI header set */
109#define MPI_HEADER_VERSION_UNIT (0x0C) 110#define MPI_HEADER_VERSION_UNIT (0x0D)
110#define MPI_HEADER_VERSION_DEV (0x00) 111#define MPI_HEADER_VERSION_DEV (0x00)
111#define MPI_HEADER_VERSION_UNIT_MASK (0xFF00) 112#define MPI_HEADER_VERSION_UNIT_MASK (0xFF00)
112#define MPI_HEADER_VERSION_UNIT_SHIFT (8) 113#define MPI_HEADER_VERSION_UNIT_SHIFT (8)
diff --git a/drivers/message/fusion/lsi/mpi_cnfg.h b/drivers/message/fusion/lsi/mpi_cnfg.h
index b1becec27e1b..47e13e360c10 100644
--- a/drivers/message/fusion/lsi/mpi_cnfg.h
+++ b/drivers/message/fusion/lsi/mpi_cnfg.h
@@ -6,7 +6,7 @@
6 * Title: MPI Config message, structures, and Pages 6 * Title: MPI Config message, structures, and Pages
7 * Creation Date: July 27, 2000 7 * Creation Date: July 27, 2000
8 * 8 *
9 * mpi_cnfg.h Version: 01.05.11 9 * mpi_cnfg.h Version: 01.05.12
10 * 10 *
11 * Version History 11 * Version History
12 * --------------- 12 * ---------------
@@ -266,6 +266,16 @@
266 * Added postpone SATA Init bit to SAS IO Unit Page 1 266 * Added postpone SATA Init bit to SAS IO Unit Page 1
267 * ControlFlags. 267 * ControlFlags.
268 * Changed LogEntry format for Log Page 0. 268 * Changed LogEntry format for Log Page 0.
269 * 03-27-06 01.05.12 Added two new Flags defines for Manufacturing Page 4.
270 * Added Manufacturing Page 7.
271 * Added MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING.
272 * Added IOC Page 6.
273 * Added PrevBootDeviceForm field to CONFIG_PAGE_BIOS_2.
274 * Added MaxLBAHigh field to RAID Volume Page 0.
275 * Added Nvdata version fields to SAS IO Unit Page 0.
276 * Added AdditionalControlFlags, MaxTargetPortConnectTime,
277 * ReportDeviceMissingDelay, and IODeviceMissingDelay
278 * fields to SAS IO Unit Page 1.
269 * -------------------------------------------------------------------------- 279 * --------------------------------------------------------------------------
270 */ 280 */
271 281
@@ -631,9 +641,11 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4
631} CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4, 641} CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4,
632 ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t; 642 ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t;
633 643
634#define MPI_MANUFACTURING4_PAGEVERSION (0x03) 644#define MPI_MANUFACTURING4_PAGEVERSION (0x04)
635 645
636/* defines for the Flags field */ 646/* defines for the Flags field */
647#define MPI_MANPAGE4_FORCE_BAD_BLOCK_TABLE (0x80)
648#define MPI_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x40)
637#define MPI_MANPAGE4_IME_DISABLE (0x20) 649#define MPI_MANPAGE4_IME_DISABLE (0x20)
638#define MPI_MANPAGE4_IM_DISABLE (0x10) 650#define MPI_MANPAGE4_IM_DISABLE (0x10)
639#define MPI_MANPAGE4_IS_DISABLE (0x08) 651#define MPI_MANPAGE4_IS_DISABLE (0x08)
@@ -668,6 +680,66 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_6
668#define MPI_MANUFACTURING6_PAGEVERSION (0x00) 680#define MPI_MANUFACTURING6_PAGEVERSION (0x00)
669 681
670 682
683typedef struct _MPI_MANPAGE7_CONNECTOR_INFO
684{
685 U32 Pinout; /* 00h */
686 U8 Connector[16]; /* 04h */
687 U8 Location; /* 14h */
688 U8 Reserved1; /* 15h */
689 U16 Slot; /* 16h */
690 U32 Reserved2; /* 18h */
691} MPI_MANPAGE7_CONNECTOR_INFO, MPI_POINTER PTR_MPI_MANPAGE7_CONNECTOR_INFO,
692 MpiManPage7ConnectorInfo_t, MPI_POINTER pMpiManPage7ConnectorInfo_t;
693
694/* defines for the Pinout field */
695#define MPI_MANPAGE7_PINOUT_SFF_8484_L4 (0x00080000)
696#define MPI_MANPAGE7_PINOUT_SFF_8484_L3 (0x00040000)
697#define MPI_MANPAGE7_PINOUT_SFF_8484_L2 (0x00020000)
698#define MPI_MANPAGE7_PINOUT_SFF_8484_L1 (0x00010000)
699#define MPI_MANPAGE7_PINOUT_SFF_8470_L4 (0x00000800)
700#define MPI_MANPAGE7_PINOUT_SFF_8470_L3 (0x00000400)
701#define MPI_MANPAGE7_PINOUT_SFF_8470_L2 (0x00000200)
702#define MPI_MANPAGE7_PINOUT_SFF_8470_L1 (0x00000100)
703#define MPI_MANPAGE7_PINOUT_SFF_8482 (0x00000002)
704#define MPI_MANPAGE7_PINOUT_CONNECTION_UNKNOWN (0x00000001)
705
706/* defines for the Location field */
707#define MPI_MANPAGE7_LOCATION_UNKNOWN (0x01)
708#define MPI_MANPAGE7_LOCATION_INTERNAL (0x02)
709#define MPI_MANPAGE7_LOCATION_EXTERNAL (0x04)
710#define MPI_MANPAGE7_LOCATION_SWITCHABLE (0x08)
711#define MPI_MANPAGE7_LOCATION_AUTO (0x10)
712#define MPI_MANPAGE7_LOCATION_NOT_PRESENT (0x20)
713#define MPI_MANPAGE7_LOCATION_NOT_CONNECTED (0x80)
714
715/*
716 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
717 * one and check NumPhys at runtime.
718 */
719#ifndef MPI_MANPAGE7_CONNECTOR_INFO_MAX
720#define MPI_MANPAGE7_CONNECTOR_INFO_MAX (1)
721#endif
722
723typedef struct _CONFIG_PAGE_MANUFACTURING_7
724{
725 CONFIG_PAGE_HEADER Header; /* 00h */
726 U32 Reserved1; /* 04h */
727 U32 Reserved2; /* 08h */
728 U32 Flags; /* 0Ch */
729 U8 EnclosureName[16]; /* 10h */
730 U8 NumPhys; /* 20h */
731 U8 Reserved3; /* 21h */
732 U16 Reserved4; /* 22h */
733 MPI_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI_MANPAGE7_CONNECTOR_INFO_MAX]; /* 24h */
734} CONFIG_PAGE_MANUFACTURING_7, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_7,
735 ManufacturingPage7_t, MPI_POINTER pManufacturingPage7_t;
736
737#define MPI_MANUFACTURING7_PAGEVERSION (0x00)
738
739/* defines for the Flags field */
740#define MPI_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001)
741
742
671/**************************************************************************** 743/****************************************************************************
672* IO Unit Config Pages 744* IO Unit Config Pages
673****************************************************************************/ 745****************************************************************************/
@@ -867,7 +939,7 @@ typedef struct _CONFIG_PAGE_IOC_2
867} CONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2, 939} CONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2,
868 IOCPage2_t, MPI_POINTER pIOCPage2_t; 940 IOCPage2_t, MPI_POINTER pIOCPage2_t;
869 941
870#define MPI_IOCPAGE2_PAGEVERSION (0x03) 942#define MPI_IOCPAGE2_PAGEVERSION (0x04)
871 943
872/* IOC Page 2 Capabilities flags */ 944/* IOC Page 2 Capabilities flags */
873 945
@@ -878,6 +950,7 @@ typedef struct _CONFIG_PAGE_IOC_2
878#define MPI_IOCPAGE2_CAP_FLAGS_RAID_6_SUPPORT (0x00000010) 950#define MPI_IOCPAGE2_CAP_FLAGS_RAID_6_SUPPORT (0x00000010)
879#define MPI_IOCPAGE2_CAP_FLAGS_RAID_10_SUPPORT (0x00000020) 951#define MPI_IOCPAGE2_CAP_FLAGS_RAID_10_SUPPORT (0x00000020)
880#define MPI_IOCPAGE2_CAP_FLAGS_RAID_50_SUPPORT (0x00000040) 952#define MPI_IOCPAGE2_CAP_FLAGS_RAID_50_SUPPORT (0x00000040)
953#define MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING (0x10000000)
881#define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT (0x20000000) 954#define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT (0x20000000)
882#define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT (0x40000000) 955#define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT (0x40000000)
883#define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT (0x80000000) 956#define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT (0x80000000)
@@ -975,6 +1048,44 @@ typedef struct _CONFIG_PAGE_IOC_5
975 1048
976#define MPI_IOCPAGE5_PAGEVERSION (0x00) 1049#define MPI_IOCPAGE5_PAGEVERSION (0x00)
977 1050
1051typedef struct _CONFIG_PAGE_IOC_6
1052{
1053 CONFIG_PAGE_HEADER Header; /* 00h */
1054 U32 CapabilitiesFlags; /* 04h */
1055 U8 MaxDrivesIS; /* 08h */
1056 U8 MaxDrivesIM; /* 09h */
1057 U8 MaxDrivesIME; /* 0Ah */
1058 U8 Reserved1; /* 0Bh */
1059 U8 MinDrivesIS; /* 0Ch */
1060 U8 MinDrivesIM; /* 0Dh */
1061 U8 MinDrivesIME; /* 0Eh */
1062 U8 Reserved2; /* 0Fh */
1063 U8 MaxGlobalHotSpares; /* 10h */
1064 U8 Reserved3; /* 11h */
1065 U16 Reserved4; /* 12h */
1066 U32 Reserved5; /* 14h */
1067 U32 SupportedStripeSizeMapIS; /* 18h */
1068 U32 SupportedStripeSizeMapIME; /* 1Ch */
1069 U32 Reserved6; /* 20h */
1070 U8 MetadataSize; /* 24h */
1071 U8 Reserved7; /* 25h */
1072 U16 Reserved8; /* 26h */
1073 U16 MaxBadBlockTableEntries; /* 28h */
1074 U16 Reserved9; /* 2Ah */
1075 U16 IRNvsramUsage; /* 2Ch */
1076 U16 Reserved10; /* 2Eh */
1077 U32 IRNvsramVersion; /* 30h */
1078 U32 Reserved11; /* 34h */
1079 U32 Reserved12; /* 38h */
1080} CONFIG_PAGE_IOC_6, MPI_POINTER PTR_CONFIG_PAGE_IOC_6,
1081 IOCPage6_t, MPI_POINTER pIOCPage6_t;
1082
1083#define MPI_IOCPAGE6_PAGEVERSION (0x00)
1084
1085/* IOC Page 6 Capabilities Flags */
1086
1087#define MPI_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001)
1088
978 1089
979/**************************************************************************** 1090/****************************************************************************
980* BIOS Config Pages 1091* BIOS Config Pages
@@ -1218,13 +1329,13 @@ typedef struct _CONFIG_PAGE_BIOS_2
1218 U32 Reserved5; /* 14h */ 1329 U32 Reserved5; /* 14h */
1219 U32 Reserved6; /* 18h */ 1330 U32 Reserved6; /* 18h */
1220 U8 BootDeviceForm; /* 1Ch */ 1331 U8 BootDeviceForm; /* 1Ch */
1221 U8 Reserved7; /* 1Dh */ 1332 U8 PrevBootDeviceForm; /* 1Ch */
1222 U16 Reserved8; /* 1Eh */ 1333 U16 Reserved8; /* 1Eh */
1223 MPI_BIOSPAGE2_BOOT_DEVICE BootDevice; /* 20h */ 1334 MPI_BIOSPAGE2_BOOT_DEVICE BootDevice; /* 20h */
1224} CONFIG_PAGE_BIOS_2, MPI_POINTER PTR_CONFIG_PAGE_BIOS_2, 1335} CONFIG_PAGE_BIOS_2, MPI_POINTER PTR_CONFIG_PAGE_BIOS_2,
1225 BIOSPage2_t, MPI_POINTER pBIOSPage2_t; 1336 BIOSPage2_t, MPI_POINTER pBIOSPage2_t;
1226 1337
1227#define MPI_BIOSPAGE2_PAGEVERSION (0x01) 1338#define MPI_BIOSPAGE2_PAGEVERSION (0x02)
1228 1339
1229#define MPI_BIOSPAGE2_FORM_MASK (0x0F) 1340#define MPI_BIOSPAGE2_FORM_MASK (0x0F)
1230#define MPI_BIOSPAGE2_FORM_ADAPTER_ORDER (0x00) 1341#define MPI_BIOSPAGE2_FORM_ADAPTER_ORDER (0x00)
@@ -2080,7 +2191,7 @@ typedef struct _CONFIG_PAGE_RAID_VOL_0
2080 RAID_VOL0_STATUS VolumeStatus; /* 08h */ 2191 RAID_VOL0_STATUS VolumeStatus; /* 08h */
2081 RAID_VOL0_SETTINGS VolumeSettings; /* 0Ch */ 2192 RAID_VOL0_SETTINGS VolumeSettings; /* 0Ch */
2082 U32 MaxLBA; /* 10h */ 2193 U32 MaxLBA; /* 10h */
2083 U32 Reserved1; /* 14h */ 2194 U32 MaxLBAHigh; /* 14h */
2084 U32 StripeSize; /* 18h */ 2195 U32 StripeSize; /* 18h */
2085 U32 Reserved2; /* 1Ch */ 2196 U32 Reserved2; /* 1Ch */
2086 U32 Reserved3; /* 20h */ 2197 U32 Reserved3; /* 20h */
@@ -2092,7 +2203,7 @@ typedef struct _CONFIG_PAGE_RAID_VOL_0
2092} CONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0, 2203} CONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0,
2093 RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t; 2204 RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t;
2094 2205
2095#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x05) 2206#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x06)
2096 2207
2097/* values for RAID Volume Page 0 InactiveStatus field */ 2208/* values for RAID Volume Page 0 InactiveStatus field */
2098#define MPI_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00) 2209#define MPI_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00)
@@ -2324,7 +2435,8 @@ typedef struct _MPI_SAS_IO_UNIT0_PHY_DATA
2324typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0 2435typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
2325{ 2436{
2326 CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ 2437 CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */
2327 U32 Reserved1; /* 08h */ 2438 U16 NvdataVersionDefault; /* 08h */
2439 U16 NvdataVersionPersistent; /* 0Ah */
2328 U8 NumPhys; /* 0Ch */ 2440 U8 NumPhys; /* 0Ch */
2329 U8 Reserved2; /* 0Dh */ 2441 U8 Reserved2; /* 0Dh */
2330 U16 Reserved3; /* 0Eh */ 2442 U16 Reserved3; /* 0Eh */
@@ -2332,7 +2444,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
2332} CONFIG_PAGE_SAS_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_0, 2444} CONFIG_PAGE_SAS_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_0,
2333 SasIOUnitPage0_t, MPI_POINTER pSasIOUnitPage0_t; 2445 SasIOUnitPage0_t, MPI_POINTER pSasIOUnitPage0_t;
2334 2446
2335#define MPI_SASIOUNITPAGE0_PAGEVERSION (0x03) 2447#define MPI_SASIOUNITPAGE0_PAGEVERSION (0x04)
2336 2448
2337/* values for SAS IO Unit Page 0 PortFlags */ 2449/* values for SAS IO Unit Page 0 PortFlags */
2338#define MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS (0x08) 2450#define MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS (0x08)
@@ -2373,12 +2485,13 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
2373 2485
2374typedef struct _MPI_SAS_IO_UNIT1_PHY_DATA 2486typedef struct _MPI_SAS_IO_UNIT1_PHY_DATA
2375{ 2487{
2376 U8 Port; /* 00h */ 2488 U8 Port; /* 00h */
2377 U8 PortFlags; /* 01h */ 2489 U8 PortFlags; /* 01h */
2378 U8 PhyFlags; /* 02h */ 2490 U8 PhyFlags; /* 02h */
2379 U8 MaxMinLinkRate; /* 03h */ 2491 U8 MaxMinLinkRate; /* 03h */
2380 U32 ControllerPhyDeviceInfo;/* 04h */ 2492 U32 ControllerPhyDeviceInfo; /* 04h */
2381 U32 Reserved1; /* 08h */ 2493 U16 MaxTargetPortConnectTime; /* 08h */
2494 U16 Reserved1; /* 0Ah */
2382} MPI_SAS_IO_UNIT1_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT1_PHY_DATA, 2495} MPI_SAS_IO_UNIT1_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT1_PHY_DATA,
2383 SasIOUnit1PhyData, MPI_POINTER pSasIOUnit1PhyData; 2496 SasIOUnit1PhyData, MPI_POINTER pSasIOUnit1PhyData;
2384 2497
@@ -2395,15 +2508,17 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
2395 CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ 2508 CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */
2396 U16 ControlFlags; /* 08h */ 2509 U16 ControlFlags; /* 08h */
2397 U16 MaxNumSATATargets; /* 0Ah */ 2510 U16 MaxNumSATATargets; /* 0Ah */
2398 U32 Reserved1; /* 0Ch */ 2511 U16 AdditionalControlFlags; /* 0Ch */
2512 U16 Reserved1; /* 0Eh */
2399 U8 NumPhys; /* 10h */ 2513 U8 NumPhys; /* 10h */
2400 U8 SATAMaxQDepth; /* 11h */ 2514 U8 SATAMaxQDepth; /* 11h */
2401 U16 Reserved2; /* 12h */ 2515 U8 ReportDeviceMissingDelay; /* 12h */
2516 U8 IODeviceMissingDelay; /* 13h */
2402 MPI_SAS_IO_UNIT1_PHY_DATA PhyData[MPI_SAS_IOUNIT1_PHY_MAX]; /* 14h */ 2517 MPI_SAS_IO_UNIT1_PHY_DATA PhyData[MPI_SAS_IOUNIT1_PHY_MAX]; /* 14h */
2403} CONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1, 2518} CONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1,
2404 SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t; 2519 SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t;
2405 2520
2406#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x05) 2521#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x06)
2407 2522
2408/* values for SAS IO Unit Page 1 ControlFlags */ 2523/* values for SAS IO Unit Page 1 ControlFlags */
2409#define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000) 2524#define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000)
@@ -2428,6 +2543,13 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
2428#define MPI_SAS_IOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002) 2543#define MPI_SAS_IOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002)
2429#define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001) 2544#define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001)
2430 2545
2546/* values for SAS IO Unit Page 1 AdditionalControlFlags */
2547#define MPI_SAS_IOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001)
2548
2549/* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */
2550#define MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F)
2551#define MPI_SAS_IOUNIT1_REPORT_MISSING_UNIT_16 (0x80)
2552
2431/* values for SAS IO Unit Page 1 PortFlags */ 2553/* values for SAS IO Unit Page 1 PortFlags */
2432#define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM (0x00) 2554#define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM (0x00)
2433#define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM (0x04) 2555#define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM (0x04)
diff --git a/drivers/message/fusion/lsi/mpi_history.txt b/drivers/message/fusion/lsi/mpi_history.txt
index 4a5f8dd1d766..582cfe7c2aa1 100644
--- a/drivers/message/fusion/lsi/mpi_history.txt
+++ b/drivers/message/fusion/lsi/mpi_history.txt
@@ -6,25 +6,25 @@
6 Copyright (c) 2000-2005 LSI Logic Corporation. 6 Copyright (c) 2000-2005 LSI Logic Corporation.
7 7
8 --------------------------------------- 8 ---------------------------------------
9 Header Set Release Version: 01.05.12 9 Header Set Release Version: 01.05.13
10 Header Set Release Date: 08-30-05 10 Header Set Release Date: 03-27-06
11 --------------------------------------- 11 ---------------------------------------
12 12
13 Filename Current version Prior version 13 Filename Current version Prior version
14 ---------- --------------- ------------- 14 ---------- --------------- -------------
15 mpi.h 01.05.10 01.05.09 15 mpi.h 01.05.11 01.05.10
16 mpi_ioc.h 01.05.10 01.05.09 16 mpi_ioc.h 01.05.11 01.05.10
17 mpi_cnfg.h 01.05.11 01.05.10 17 mpi_cnfg.h 01.05.12 01.05.11
18 mpi_init.h 01.05.06 01.05.06 18 mpi_init.h 01.05.07 01.05.06
19 mpi_targ.h 01.05.05 01.05.05 19 mpi_targ.h 01.05.06 01.05.05
20 mpi_fc.h 01.05.01 01.05.01 20 mpi_fc.h 01.05.01 01.05.01
21 mpi_lan.h 01.05.01 01.05.01 21 mpi_lan.h 01.05.01 01.05.01
22 mpi_raid.h 01.05.02 01.05.02 22 mpi_raid.h 01.05.02 01.05.02
23 mpi_tool.h 01.05.03 01.05.03 23 mpi_tool.h 01.05.03 01.05.03
24 mpi_inb.h 01.05.01 01.05.01 24 mpi_inb.h 01.05.01 01.05.01
25 mpi_sas.h 01.05.02 01.05.01 25 mpi_sas.h 01.05.03 01.05.02
26 mpi_type.h 01.05.02 01.05.01 26 mpi_type.h 01.05.02 01.05.02
27 mpi_history.txt 01.05.12 01.05.11 27 mpi_history.txt 01.05.13 01.05.12
28 28
29 29
30 * Date Version Description 30 * Date Version Description
@@ -93,6 +93,7 @@ mpi.h
93 * Added EEDP IOCStatus codes. 93 * Added EEDP IOCStatus codes.
94 * 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT. 94 * 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT.
95 * 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target. 95 * 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target.
96 * 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT.
96 * -------------------------------------------------------------------------- 97 * --------------------------------------------------------------------------
97 98
98mpi_ioc.h 99mpi_ioc.h
@@ -170,6 +171,17 @@ mpi_ioc.h
170 * Added new ReasonCode value for SAS Device Status Change 171 * Added new ReasonCode value for SAS Device Status Change
171 * event. 172 * event.
172 * Added new family code for FC949E. 173 * Added new family code for FC949E.
174 * 03-27-06 01.05.11 Added MPI_IOCFACTS_CAPABILITY_TLR.
175 * Added additional Reason Codes and more event data fields
176 * to EVENT_DATA_SAS_DEVICE_STATUS_CHANGE.
177 * Added EVENT_DATA_SAS_BROADCAST_PRIMITIVE structure and
178 * new event.
179 * Added MPI_EVENT_SAS_SMP_ERROR and event data structure.
180 * Added MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE and event
181 * data structure.
182 * Added MPI_EVENT_SAS_INIT_TABLE_OVERFLOW and event
183 * data structure.
184 * Added MPI_EXT_IMAGE_TYPE_INITIALIZATION.
173 * -------------------------------------------------------------------------- 185 * --------------------------------------------------------------------------
174 186
175mpi_cnfg.h 187mpi_cnfg.h
@@ -425,6 +437,16 @@ mpi_cnfg.h
425 * Added postpone SATA Init bit to SAS IO Unit Page 1 437 * Added postpone SATA Init bit to SAS IO Unit Page 1
426 * ControlFlags. 438 * ControlFlags.
427 * Changed LogEntry format for Log Page 0. 439 * Changed LogEntry format for Log Page 0.
440 * 03-27-06 01.05.12 Added two new Flags defines for Manufacturing Page 4.
441 * Added Manufacturing Page 7.
442 * Added MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING.
443 * Added IOC Page 6.
444 * Added PrevBootDeviceForm field to CONFIG_PAGE_BIOS_2.
445 * Added MaxLBAHigh field to RAID Volume Page 0.
446 * Added Nvdata version fields to SAS IO Unit Page 0.
447 * Added AdditionalControlFlags, MaxTargetPortConnectTime,
448 * ReportDeviceMissingDelay, and IODeviceMissingDelay
449 * fields to SAS IO Unit Page 1.
428 * -------------------------------------------------------------------------- 450 * --------------------------------------------------------------------------
429 451
430mpi_init.h 452mpi_init.h
@@ -467,6 +489,7 @@ mpi_init.h
467 * Added four new defines for SEP SlotStatus. 489 * Added four new defines for SEP SlotStatus.
468 * 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them 490 * 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
469 * unique in the first 32 characters. 491 * unique in the first 32 characters.
492 * 03-27-06 01.05.07 Added Task Management type of Clear ACA.
470 * -------------------------------------------------------------------------- 493 * --------------------------------------------------------------------------
471 494
472mpi_targ.h 495mpi_targ.h
@@ -511,6 +534,7 @@ mpi_targ.h
511 * 02-22-05 01.05.03 Changed a comment. 534 * 02-22-05 01.05.03 Changed a comment.
512 * 03-11-05 01.05.04 Removed TargetAssistExtended Request. 535 * 03-11-05 01.05.04 Removed TargetAssistExtended Request.
513 * 06-24-05 01.05.05 Added TargetAssistExtended structures and defines. 536 * 06-24-05 01.05.05 Added TargetAssistExtended structures and defines.
537 * 03-27-06 01.05.06 Added a comment.
514 * -------------------------------------------------------------------------- 538 * --------------------------------------------------------------------------
515 539
516mpi_fc.h 540mpi_fc.h
@@ -610,6 +634,10 @@ mpi_sas.h
610 * 08-30-05 01.05.02 Added DeviceInfo bit for SEP. 634 * 08-30-05 01.05.02 Added DeviceInfo bit for SEP.
611 * Added PrimFlags and Primitive field to SAS IO Unit 635 * Added PrimFlags and Primitive field to SAS IO Unit
612 * Control request, and added a new operation code. 636 * Control request, and added a new operation code.
637 * 03-27-06 01.05.03 Added Force Full Discovery, Transmit Port Select Signal,
638 * and Remove Device operations to SAS IO Unit Control.
639 * Added DevHandle field to SAS IO Unit Control request and
640 * reply.
613 * -------------------------------------------------------------------------- 641 * --------------------------------------------------------------------------
614 642
615mpi_type.h 643mpi_type.h
@@ -625,20 +653,20 @@ mpi_type.h
625 653
626mpi_history.txt Parts list history 654mpi_history.txt Parts list history
627 655
628Filename 01.05.12 01.05.11 01.05.10 01.05.09 656Filename 01.05.13 01.05.12 01.05.11 01.05.10 01.05.09
629---------- -------- -------- -------- -------- 657---------- -------- -------- -------- -------- --------
630mpi.h 01.05.10 01.05.09 01.05.08 01.05.07 658mpi.h 01.05.11 01.05.10 01.05.09 01.05.08 01.05.07
631mpi_ioc.h 01.05.10 01.05.09 01.05.09 01.05.08 659mpi_ioc.h 01.05.11 01.05.10 01.05.09 01.05.09 01.05.08
632mpi_cnfg.h 01.05.11 01.05.10 01.05.09 01.05.08 660mpi_cnfg.h 01.05.12 01.05.11 01.05.10 01.05.09 01.05.08
633mpi_init.h 01.05.06 01.05.06 01.05.05 01.05.04 661mpi_init.h 01.05.07 01.05.06 01.05.06 01.05.05 01.05.04
634mpi_targ.h 01.05.05 01.05.05 01.05.05 01.05.04 662mpi_targ.h 01.05.06 01.05.05 01.05.05 01.05.05 01.05.04
635mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 663mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
636mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 664mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
637mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.02 665mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02
638mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 666mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03
639mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 667mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
640mpi_sas.h 01.05.02 01.05.01 01.05.01 01.05.01 668mpi_sas.h 01.05.03 01.05.02 01.05.01 01.05.01 01.05.01
641mpi_type.h 01.05.02 01.05.01 01.05.01 01.05.01 669mpi_type.h 01.05.02 01.05.02 01.05.01 01.05.01 01.05.01
642 670
643Filename 01.05.08 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03 671Filename 01.05.08 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03
644---------- -------- -------- -------- -------- -------- -------- 672---------- -------- -------- -------- -------- -------- --------
diff --git a/drivers/message/fusion/lsi/mpi_init.h b/drivers/message/fusion/lsi/mpi_init.h
index 68941f459ca3..c1c678989a23 100644
--- a/drivers/message/fusion/lsi/mpi_init.h
+++ b/drivers/message/fusion/lsi/mpi_init.h
@@ -6,7 +6,7 @@
6 * Title: MPI initiator mode messages and structures 6 * Title: MPI initiator mode messages and structures
7 * Creation Date: June 8, 2000 7 * Creation Date: June 8, 2000
8 * 8 *
9 * mpi_init.h Version: 01.05.06 9 * mpi_init.h Version: 01.05.07
10 * 10 *
11 * Version History 11 * Version History
12 * --------------- 12 * ---------------
@@ -52,6 +52,7 @@
52 * Added four new defines for SEP SlotStatus. 52 * Added four new defines for SEP SlotStatus.
53 * 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them 53 * 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
54 * unique in the first 32 characters. 54 * unique in the first 32 characters.
55 * 03-27-06 01.05.07 Added Task Management type of Clear ACA.
55 * -------------------------------------------------------------------------- 56 * --------------------------------------------------------------------------
56 */ 57 */
57 58
@@ -427,6 +428,7 @@ typedef struct _MSG_SCSI_TASK_MGMT
427#define MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05) 428#define MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
428#define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06) 429#define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06)
429#define MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07) 430#define MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07)
431#define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_ACA (0x08)
430 432
431/* MsgFlags bits */ 433/* MsgFlags bits */
432#define MPI_SCSITASKMGMT_MSGFLAGS_TARGET_RESET_OPTION (0x00) 434#define MPI_SCSITASKMGMT_MSGFLAGS_TARGET_RESET_OPTION (0x00)
diff --git a/drivers/message/fusion/lsi/mpi_ioc.h b/drivers/message/fusion/lsi/mpi_ioc.h
index 2c5f43fa7c73..18ba407fd399 100644
--- a/drivers/message/fusion/lsi/mpi_ioc.h
+++ b/drivers/message/fusion/lsi/mpi_ioc.h
@@ -6,7 +6,7 @@
6 * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages 6 * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
7 * Creation Date: August 11, 2000 7 * Creation Date: August 11, 2000
8 * 8 *
9 * mpi_ioc.h Version: 01.05.10 9 * mpi_ioc.h Version: 01.05.11
10 * 10 *
11 * Version History 11 * Version History
12 * --------------- 12 * ---------------
@@ -87,6 +87,17 @@
87 * Added new ReasonCode value for SAS Device Status Change 87 * Added new ReasonCode value for SAS Device Status Change
88 * event. 88 * event.
89 * Added new family code for FC949E. 89 * Added new family code for FC949E.
90 * 03-27-06 01.05.11 Added MPI_IOCFACTS_CAPABILITY_TLR.
91 * Added additional Reason Codes and more event data fields
92 * to EVENT_DATA_SAS_DEVICE_STATUS_CHANGE.
93 * Added EVENT_DATA_SAS_BROADCAST_PRIMITIVE structure and
94 * new event.
95 * Added MPI_EVENT_SAS_SMP_ERROR and event data structure.
96 * Added MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE and event
97 * data structure.
98 * Added MPI_EVENT_SAS_INIT_TABLE_OVERFLOW and event
99 * data structure.
100 * Added MPI_EXT_IMAGE_TYPE_INITIALIZATION.
90 * -------------------------------------------------------------------------- 101 * --------------------------------------------------------------------------
91 */ 102 */
92 103
@@ -272,6 +283,7 @@ typedef struct _MSG_IOC_FACTS_REPLY
272#define MPI_IOCFACTS_CAPABILITY_MULTICAST (0x00000100) 283#define MPI_IOCFACTS_CAPABILITY_MULTICAST (0x00000100)
273#define MPI_IOCFACTS_CAPABILITY_SCSIIO32 (0x00000200) 284#define MPI_IOCFACTS_CAPABILITY_SCSIIO32 (0x00000200)
274#define MPI_IOCFACTS_CAPABILITY_NO_SCSIIO16 (0x00000400) 285#define MPI_IOCFACTS_CAPABILITY_NO_SCSIIO16 (0x00000400)
286#define MPI_IOCFACTS_CAPABILITY_TLR (0x00000800)
275 287
276 288
277/***************************************************************************** 289/*****************************************************************************
@@ -448,30 +460,34 @@ typedef struct _MSG_EVENT_ACK_REPLY
448 460
449/* Event */ 461/* Event */
450 462
451#define MPI_EVENT_NONE (0x00000000) 463#define MPI_EVENT_NONE (0x00000000)
452#define MPI_EVENT_LOG_DATA (0x00000001) 464#define MPI_EVENT_LOG_DATA (0x00000001)
453#define MPI_EVENT_STATE_CHANGE (0x00000002) 465#define MPI_EVENT_STATE_CHANGE (0x00000002)
454#define MPI_EVENT_UNIT_ATTENTION (0x00000003) 466#define MPI_EVENT_UNIT_ATTENTION (0x00000003)
455#define MPI_EVENT_IOC_BUS_RESET (0x00000004) 467#define MPI_EVENT_IOC_BUS_RESET (0x00000004)
456#define MPI_EVENT_EXT_BUS_RESET (0x00000005) 468#define MPI_EVENT_EXT_BUS_RESET (0x00000005)
457#define MPI_EVENT_RESCAN (0x00000006) 469#define MPI_EVENT_RESCAN (0x00000006)
458#define MPI_EVENT_LINK_STATUS_CHANGE (0x00000007) 470#define MPI_EVENT_LINK_STATUS_CHANGE (0x00000007)
459#define MPI_EVENT_LOOP_STATE_CHANGE (0x00000008) 471#define MPI_EVENT_LOOP_STATE_CHANGE (0x00000008)
460#define MPI_EVENT_LOGOUT (0x00000009) 472#define MPI_EVENT_LOGOUT (0x00000009)
461#define MPI_EVENT_EVENT_CHANGE (0x0000000A) 473#define MPI_EVENT_EVENT_CHANGE (0x0000000A)
462#define MPI_EVENT_INTEGRATED_RAID (0x0000000B) 474#define MPI_EVENT_INTEGRATED_RAID (0x0000000B)
463#define MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE (0x0000000C) 475#define MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE (0x0000000C)
464#define MPI_EVENT_ON_BUS_TIMER_EXPIRED (0x0000000D) 476#define MPI_EVENT_ON_BUS_TIMER_EXPIRED (0x0000000D)
465#define MPI_EVENT_QUEUE_FULL (0x0000000E) 477#define MPI_EVENT_QUEUE_FULL (0x0000000E)
466#define MPI_EVENT_SAS_DEVICE_STATUS_CHANGE (0x0000000F) 478#define MPI_EVENT_SAS_DEVICE_STATUS_CHANGE (0x0000000F)
467#define MPI_EVENT_SAS_SES (0x00000010) 479#define MPI_EVENT_SAS_SES (0x00000010)
468#define MPI_EVENT_PERSISTENT_TABLE_FULL (0x00000011) 480#define MPI_EVENT_PERSISTENT_TABLE_FULL (0x00000011)
469#define MPI_EVENT_SAS_PHY_LINK_STATUS (0x00000012) 481#define MPI_EVENT_SAS_PHY_LINK_STATUS (0x00000012)
470#define MPI_EVENT_SAS_DISCOVERY_ERROR (0x00000013) 482#define MPI_EVENT_SAS_DISCOVERY_ERROR (0x00000013)
471#define MPI_EVENT_IR_RESYNC_UPDATE (0x00000014) 483#define MPI_EVENT_IR_RESYNC_UPDATE (0x00000014)
472#define MPI_EVENT_IR2 (0x00000015) 484#define MPI_EVENT_IR2 (0x00000015)
473#define MPI_EVENT_SAS_DISCOVERY (0x00000016) 485#define MPI_EVENT_SAS_DISCOVERY (0x00000016)
474#define MPI_EVENT_LOG_ENTRY_ADDED (0x00000021) 486#define MPI_EVENT_SAS_BROADCAST_PRIMITIVE (0x00000017)
487#define MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x00000018)
488#define MPI_EVENT_SAS_INIT_TABLE_OVERFLOW (0x00000019)
489#define MPI_EVENT_SAS_SMP_ERROR (0x0000001A)
490#define MPI_EVENT_LOG_ENTRY_ADDED (0x00000021)
475 491
476/* AckRequired field values */ 492/* AckRequired field values */
477 493
@@ -558,18 +574,25 @@ typedef struct _EVENT_DATA_SAS_DEVICE_STATUS_CHANGE
558 U8 PhyNum; /* 0Eh */ 574 U8 PhyNum; /* 0Eh */
559 U8 Reserved1; /* 0Fh */ 575 U8 Reserved1; /* 0Fh */
560 U64 SASAddress; /* 10h */ 576 U64 SASAddress; /* 10h */
577 U8 LUN[8]; /* 18h */
578 U16 TaskTag; /* 20h */
579 U16 Reserved2; /* 22h */
561} EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, 580} EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
562 MPI_POINTER PTR_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, 581 MPI_POINTER PTR_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
563 MpiEventDataSasDeviceStatusChange_t, 582 MpiEventDataSasDeviceStatusChange_t,
564 MPI_POINTER pMpiEventDataSasDeviceStatusChange_t; 583 MPI_POINTER pMpiEventDataSasDeviceStatusChange_t;
565 584
566/* MPI SAS Device Status Change Event data ReasonCode values */ 585/* MPI SAS Device Status Change Event data ReasonCode values */
567#define MPI_EVENT_SAS_DEV_STAT_RC_ADDED (0x03) 586#define MPI_EVENT_SAS_DEV_STAT_RC_ADDED (0x03)
568#define MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING (0x04) 587#define MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING (0x04)
569#define MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) 588#define MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05)
570#define MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED (0x06) 589#define MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED (0x06)
571#define MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) 590#define MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07)
572#define MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) 591#define MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
592#define MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09)
593#define MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A)
594#define MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
595#define MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
573 596
574 597
575/* SCSI Event data for Queue Full event */ 598/* SCSI Event data for Queue Full event */
@@ -742,6 +765,27 @@ typedef struct _EVENT_DATA_SAS_SES
742} EVENT_DATA_SAS_SES, MPI_POINTER PTR_EVENT_DATA_SAS_SES, 765} EVENT_DATA_SAS_SES, MPI_POINTER PTR_EVENT_DATA_SAS_SES,
743 MpiEventDataSasSes_t, MPI_POINTER pMpiEventDataSasSes_t; 766 MpiEventDataSasSes_t, MPI_POINTER pMpiEventDataSasSes_t;
744 767
768/* SAS Broadcast Primitive Event data */
769
770typedef struct _EVENT_DATA_SAS_BROADCAST_PRIMITIVE
771{
772 U8 PhyNum; /* 00h */
773 U8 Port; /* 01h */
774 U8 PortWidth; /* 02h */
775 U8 Primitive; /* 04h */
776} EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
777 MPI_POINTER PTR_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
778 MpiEventDataSasBroadcastPrimitive_t,
779 MPI_POINTER pMpiEventDataSasBroadcastPrimitive_t;
780
781#define MPI_EVENT_PRIMITIVE_CHANGE (0x01)
782#define MPI_EVENT_PRIMITIVE_EXPANDER (0x03)
783#define MPI_EVENT_PRIMITIVE_RESERVED2 (0x04)
784#define MPI_EVENT_PRIMITIVE_RESERVED3 (0x05)
785#define MPI_EVENT_PRIMITIVE_RESERVED4 (0x06)
786#define MPI_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07)
787#define MPI_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08)
788
745/* SAS Phy Link Status Event data */ 789/* SAS Phy Link Status Event data */
746 790
747typedef struct _EVENT_DATA_SAS_PHY_LINK_STATUS 791typedef struct _EVENT_DATA_SAS_PHY_LINK_STATUS
@@ -804,6 +848,53 @@ typedef struct _EVENT_DATA_DISCOVERY_ERROR
804#define MPI_EVENT_DSCVRY_ERR_DS_MULTPL_PATHS (0x00000800) 848#define MPI_EVENT_DSCVRY_ERR_DS_MULTPL_PATHS (0x00000800)
805#define MPI_EVENT_DSCVRY_ERR_DS_MAX_SATA_TARGETS (0x00001000) 849#define MPI_EVENT_DSCVRY_ERR_DS_MAX_SATA_TARGETS (0x00001000)
806 850
851/* SAS SMP Error Event data */
852
853typedef struct _EVENT_DATA_SAS_SMP_ERROR
854{
855 U8 Status; /* 00h */
856 U8 Port; /* 01h */
857 U8 SMPFunctionResult; /* 02h */
858 U8 Reserved1; /* 03h */
859 U64 SASAddress; /* 04h */
860} EVENT_DATA_SAS_SMP_ERROR, MPI_POINTER PTR_EVENT_DATA_SAS_SMP_ERROR,
861 MpiEventDataSasSmpError_t, MPI_POINTER pMpiEventDataSasSmpError_t;
862
863/* defines for the Status field of the SAS SMP Error event */
864#define MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID (0x00)
865#define MPI_EVENT_SAS_SMP_CRC_ERROR (0x01)
866#define MPI_EVENT_SAS_SMP_TIMEOUT (0x02)
867#define MPI_EVENT_SAS_SMP_NO_DESTINATION (0x03)
868#define MPI_EVENT_SAS_SMP_BAD_DESTINATION (0x04)
869
870/* SAS Initiator Device Status Change Event data */
871
872typedef struct _EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE
873{
874 U8 ReasonCode; /* 00h */
875 U8 Port; /* 01h */
876 U16 DevHandle; /* 02h */
877 U64 SASAddress; /* 04h */
878} EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
879 MPI_POINTER PTR_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
880 MpiEventDataSasInitDevStatusChange_t,
881 MPI_POINTER pMpiEventDataSasInitDevStatusChange_t;
882
883/* defines for the ReasonCode field of the SAS Initiator Device Status Change event */
884#define MPI_EVENT_SAS_INIT_RC_ADDED (0x01)
885
886/* SAS Initiator Device Table Overflow Event data */
887
888typedef struct _EVENT_DATA_SAS_INIT_TABLE_OVERFLOW
889{
890 U8 MaxInit; /* 00h */
891 U8 CurrentInit; /* 01h */
892 U16 Reserved1; /* 02h */
893} EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
894 MPI_POINTER PTR_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
895 MpiEventDataSasInitTableOverflow_t,
896 MPI_POINTER pMpiEventDataSasInitTableOverflow_t;
897
807 898
808/***************************************************************************** 899/*****************************************************************************
809* 900*
@@ -1013,5 +1104,6 @@ typedef struct _MPI_EXT_IMAGE_HEADER
1013#define MPI_EXT_IMAGE_TYPE_FW (0x01) 1104#define MPI_EXT_IMAGE_TYPE_FW (0x01)
1014#define MPI_EXT_IMAGE_TYPE_NVDATA (0x03) 1105#define MPI_EXT_IMAGE_TYPE_NVDATA (0x03)
1015#define MPI_EXT_IMAGE_TYPE_BOOTLOADER (0x04) 1106#define MPI_EXT_IMAGE_TYPE_BOOTLOADER (0x04)
1107#define MPI_EXT_IMAGE_TYPE_INITIALIZATION (0x05)
1016 1108
1017#endif 1109#endif
diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h
index a9c14ad132ce..871ebc08b706 100644
--- a/drivers/message/fusion/lsi/mpi_log_sas.h
+++ b/drivers/message/fusion/lsi/mpi_log_sas.h
@@ -13,6 +13,8 @@
13#ifndef IOPI_IOCLOGINFO_H_INCLUDED 13#ifndef IOPI_IOCLOGINFO_H_INCLUDED
14#define IOPI_IOCLOGINFO_H_INCLUDED 14#define IOPI_IOCLOGINFO_H_INCLUDED
15 15
16#define SAS_LOGINFO_NEXUS_LOSS 0x31170000
17#define SAS_LOGINFO_MASK 0xFFFF0000
16 18
17/****************************************************************************/ 19/****************************************************************************/
18/* IOC LOGINFO defines, 0x00000000 - 0x0FFFFFFF */ 20/* IOC LOGINFO defines, 0x00000000 - 0x0FFFFFFF */
@@ -51,6 +53,9 @@
51#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DNM (0x00030500) /* Device Not Mapped */ 53#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DNM (0x00030500) /* Device Not Mapped */
52#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PERSIST (0x00030600) /* Persistent Page not found */ 54#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PERSIST (0x00030600) /* Persistent Page not found */
53#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT (0x00030700) /* Default Page not found */ 55#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT (0x00030700) /* Default Page not found */
56
57#define IOP_LOGINFO_CODE_DIAG_MSG_ERROR (0x00040000) /* Error handling diag msg - or'd with diag status */
58
54#define IOP_LOGINFO_CODE_TASK_TERMINATED (0x00050000) 59#define IOP_LOGINFO_CODE_TASK_TERMINATED (0x00050000)
55 60
56#define IOP_LOGINFO_CODE_ENCL_MGMT_READ_ACTION_ERR0R (0x00060001) /* Read Action not supported for SEP msg */ 61#define IOP_LOGINFO_CODE_ENCL_MGMT_READ_ACTION_ERR0R (0x00060001) /* Read Action not supported for SEP msg */
@@ -103,6 +108,7 @@
103#define PL_LOGINFO_CODE_IO_EXECUTED (0x00140000) 108#define PL_LOGINFO_CODE_IO_EXECUTED (0x00140000)
104#define PL_LOGINFO_CODE_PERS_RESV_OUT_NOT_AFFIL_OWNER (0x00150000) 109#define PL_LOGINFO_CODE_PERS_RESV_OUT_NOT_AFFIL_OWNER (0x00150000)
105#define PL_LOGINFO_CODE_OPEN_TXDMA_ABORT (0x00160000) 110#define PL_LOGINFO_CODE_OPEN_TXDMA_ABORT (0x00160000)
111#define PL_LOGINFO_CODE_IO_DEVICE_MISSING_DELAY_RETRY (0x00170000)
106#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE (0x00000100) 112#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE (0x00000100)
107#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_NO_DEST_TIMEOUT (0x00000101) 113#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_NO_DEST_TIMEOUT (0x00000101)
108#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ORR_TIMEOUT (0x0000011A) /* Open Reject (Retry) Timeout */ 114#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ORR_TIMEOUT (0x0000011A) /* Open Reject (Retry) Timeout */
@@ -165,11 +171,81 @@
165/****************************************************************************/ 171/****************************************************************************/
166/* IR LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IR */ 172/* IR LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IR */
167/****************************************************************************/ 173/****************************************************************************/
168#define IR_LOGINFO_CODE_UNUSED1 (0x00010000) 174#define IR_LOGINFO_RAID_ACTION_ERROR (0x00010000)
169#define IR_LOGINFO_CODE_UNUSED2 (0x00020000) 175#define IR_LOGINFO_CODE_UNUSED2 (0x00020000)
176
177/* Amount of information passed down for Create Volume is too large */
178#define IR_LOGINFO_VOLUME_CREATE_INVALID_LENGTH (0x00010001)
179/* Creation of duplicate volume attempted (Bus/Target ID checked) */
180#define IR_LOGINFO_VOLUME_CREATE_DUPLICATE (0x00010002)
181/* Creation failed due to maximum number of supported volumes exceeded */
182#define IR_LOGINFO_VOLUME_CREATE_NO_SLOTS (0x00010003)
183/* Creation failed due to DMA error in trying to read from host */
184#define IR_LOGINFO_VOLUME_CREATE_DMA_ERROR (0x00010004)
185/* Creation failed due to invalid volume type passed down */
186#define IR_LOGINFO_VOLUME_CREATE_INVALID_VOLUME_TYPE (0x00010005)
187/* Creation failed due to error reading MFG Page 4 */
188#define IR_LOGINFO_VOLUME_MFG_PAGE4_ERROR (0x00010006)
189/* Creation failed when trying to create internal structures */
190#define IR_LOGINFO_VOLUME_INTERNAL_CONFIG_STRUCTURE_ERROR (0x00010007)
191
192/* Activation failed due to trying to activate an already active volume */
193#define IR_LOGINFO_VOLUME_ACTIVATING_AN_ACTIVE_VOLUME (0x00010010)
194/* Activation failed due to trying to active unsupported volume type */
195#define IR_LOGINFO_VOLUME_ACTIVATING_INVALID_VOLUME_TYPE (0x00010011)
196/* Activation failed due to trying to active too many volumes */
197#define IR_LOGINFO_VOLUME_ACTIVATING_TOO_MANY_VOLUMES (0x00010012)
198/* Activation failed due to Volume ID in use already */
199#define IR_LOGINFO_VOLUME_ACTIVATING_VOLUME_ID_IN_USE (0x00010013)
200/* Activation failed call to activateVolume returned failure */
201#define IR_LOGINFO_VOLUME_ACTIVATE_VOLUME_FAILED (0x00010014)
202/* Activation failed trying to import the volume */
203#define IR_LOGINFO_VOLUME_ACTIVATING_IMPORT_VOLUME_FAILED (0x00010015)
204
205/* Phys Disk failed, too many phys disks */
206#define IR_LOGINFO_PHYSDISK_CREATE_TOO_MANY_DISKS (0x00010020)
207/* Amount of information passed down for Create Pnysdisk is too large */
208#define IR_LOGINFO_PHYSDISK_CREATE_INVALID_LENGTH (0x00010021)
209/* Creation failed due to DMA error in trying to read from host */
210#define IR_LOGINFO_PHYSDISK_CREATE_DMA_ERROR (0x00010022)
211/* Creation failed due to invalid Bus TargetID passed down */
212#define IR_LOGINFO_PHYSDISK_CREATE_BUS_TID_INVALID (0x00010023)
213/* Creation failed due to error in creating RAID Phys Disk Config Page */
214#define IR_LOGINFO_PHYSDISK_CREATE_CONFIG_PAGE_ERROR (0x00010024)
215
216
217/* Compatibility Error : IR Disabled */
218#define IR_LOGINFO_COMPAT_ERROR_RAID_DISABLED (0x00010030)
219/* Compatibility Error : Inquiry Comand failed */
220#define IR_LOGINFO_COMPAT_ERROR_INQUIRY_FAILED (0x00010031)
221/* Compatibility Error : Device not direct access device */
222#define IR_LOGINFO_COMPAT_ERROR_NOT_DIRECT_ACCESS (0x00010032)
223/* Compatibility Error : Removable device found */
224#define IR_LOGINFO_COMPAT_ERROR_REMOVABLE_FOUND (0x00010033)
225/* Compatibility Error : Device SCSI Version not 2 or higher */
226#define IR_LOGINFO_COMPAT_ERROR_NEED_SCSI_2_OR_HIGHER (0x00010034)
227/* Compatibility Error : SATA device, 48 BIT LBA not supported */
228#define IR_LOGINFO_COMPAT_ERROR_SATA_48BIT_LBA_NOT_SUPPORTED (0x00010035)
229/* Compatibility Error : Device does not have 512 byte block sizes */
230#define IR_LOGINFO_COMPAT_ERROR_DEVICE_NOT_512_BYTE_BLOCK (0x00010036)
231/* Compatibility Error : Volume Type check failed */
232#define IR_LOGINFO_COMPAT_ERROR_VOLUME_TYPE_CHECK_FAILED (0x00010037)
233/* Compatibility Error : Volume Type is unsupported by FW */
234#define IR_LOGINFO_COMPAT_ERROR_UNSUPPORTED_VOLUME_TYPE (0x00010038)
235/* Compatibility Error : Disk drive too small for use in volume */
236#define IR_LOGINFO_COMPAT_ERROR_DISK_TOO_SMALL (0x00010039)
237/* Compatibility Error : Phys disk for Create Volume not found */
238#define IR_LOGINFO_COMPAT_ERROR_PHYS_DISK_NOT_FOUND (0x0001003A)
239/* Compatibility Error : membership count error, too many or too few disks for volume type */
240#define IR_LOGINFO_COMPAT_ERROR_MEMBERSHIP_COUNT (0x0001003B)
241/* Compatibility Error : Disk stripe sizes must be 64KB */
242#define IR_LOGINFO_COMPAT_ERROR_NON_64K_STRIPE_SIZE (0x0001003C)
243/* Compatibility Error : IME size limited to < 2TB */
244#define IR_LOGINFO_COMPAT_ERROR_IME_VOL_NOT_CURRENTLY_SUPPORTED (0x0001003D)
245
170 246
171/****************************************************************************/ 247/****************************************************************************/
172/* Defines for convienence */ 248/* Defines for convenience */
173/****************************************************************************/ 249/****************************************************************************/
174#define IOC_LOGINFO_PREFIX_IOP ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IOP) 250#define IOC_LOGINFO_PREFIX_IOP ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IOP)
175#define IOC_LOGINFO_PREFIX_PL ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_PL) 251#define IOC_LOGINFO_PREFIX_PL ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_PL)
diff --git a/drivers/message/fusion/lsi/mpi_sas.h b/drivers/message/fusion/lsi/mpi_sas.h
index 70514867bddf..50b8f0a8f456 100644
--- a/drivers/message/fusion/lsi/mpi_sas.h
+++ b/drivers/message/fusion/lsi/mpi_sas.h
@@ -6,7 +6,7 @@
6 * Title: MPI Serial Attached SCSI structures and definitions 6 * Title: MPI Serial Attached SCSI structures and definitions
7 * Creation Date: August 19, 2004 7 * Creation Date: August 19, 2004
8 * 8 *
9 * mpi_sas.h Version: 01.05.02 9 * mpi_sas.h Version: 01.05.03
10 * 10 *
11 * Version History 11 * Version History
12 * --------------- 12 * ---------------
@@ -17,6 +17,10 @@
17 * 08-30-05 01.05.02 Added DeviceInfo bit for SEP. 17 * 08-30-05 01.05.02 Added DeviceInfo bit for SEP.
18 * Added PrimFlags and Primitive field to SAS IO Unit 18 * Added PrimFlags and Primitive field to SAS IO Unit
19 * Control request, and added a new operation code. 19 * Control request, and added a new operation code.
20 * 03-27-06 01.05.03 Added Force Full Discovery, Transmit Port Select Signal,
21 * and Remove Device operations to SAS IO Unit Control.
22 * Added DevHandle field to SAS IO Unit Control request and
23 * reply.
20 * -------------------------------------------------------------------------- 24 * --------------------------------------------------------------------------
21 */ 25 */
22 26
@@ -209,7 +213,7 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
209 U8 Reserved1; /* 01h */ 213 U8 Reserved1; /* 01h */
210 U8 ChainOffset; /* 02h */ 214 U8 ChainOffset; /* 02h */
211 U8 Function; /* 03h */ 215 U8 Function; /* 03h */
212 U16 Reserved2; /* 04h */ 216 U16 DevHandle; /* 04h */
213 U8 Reserved3; /* 06h */ 217 U8 Reserved3; /* 06h */
214 U8 MsgFlags; /* 07h */ 218 U8 MsgFlags; /* 07h */
215 U32 MsgContext; /* 08h */ 219 U32 MsgContext; /* 08h */
@@ -231,6 +235,9 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
231#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) 235#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08)
232#define MPI_SAS_OP_MAP_CURRENT (0x09) 236#define MPI_SAS_OP_MAP_CURRENT (0x09)
233#define MPI_SAS_OP_SEND_PRIMITIVE (0x0A) 237#define MPI_SAS_OP_SEND_PRIMITIVE (0x0A)
238#define MPI_SAS_OP_FORCE_FULL_DISCOVERY (0x0B)
239#define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C)
240#define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE (0x0D)
234 241
235/* values for the PrimFlags field */ 242/* values for the PrimFlags field */
236#define MPI_SAS_PRIMFLAGS_SINGLE (0x08) 243#define MPI_SAS_PRIMFLAGS_SINGLE (0x08)
@@ -245,7 +252,7 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY
245 U8 Reserved1; /* 01h */ 252 U8 Reserved1; /* 01h */
246 U8 MsgLength; /* 02h */ 253 U8 MsgLength; /* 02h */
247 U8 Function; /* 03h */ 254 U8 Function; /* 03h */
248 U16 Reserved2; /* 04h */ 255 U16 DevHandle; /* 04h */
249 U8 Reserved3; /* 06h */ 256 U8 Reserved3; /* 06h */
250 U8 MsgFlags; /* 07h */ 257 U8 MsgFlags; /* 07h */
251 U32 MsgContext; /* 08h */ 258 U32 MsgContext; /* 08h */
diff --git a/drivers/message/fusion/lsi/mpi_targ.h b/drivers/message/fusion/lsi/mpi_targ.h
index 3f462859ceea..20b667315773 100644
--- a/drivers/message/fusion/lsi/mpi_targ.h
+++ b/drivers/message/fusion/lsi/mpi_targ.h
@@ -6,7 +6,7 @@
6 * Title: MPI Target mode messages and structures 6 * Title: MPI Target mode messages and structures
7 * Creation Date: June 22, 2000 7 * Creation Date: June 22, 2000
8 * 8 *
9 * mpi_targ.h Version: 01.05.05 9 * mpi_targ.h Version: 01.05.06
10 * 10 *
11 * Version History 11 * Version History
12 * --------------- 12 * ---------------
@@ -54,6 +54,7 @@
54 * 02-22-05 01.05.03 Changed a comment. 54 * 02-22-05 01.05.03 Changed a comment.
55 * 03-11-05 01.05.04 Removed TargetAssistExtended Request. 55 * 03-11-05 01.05.04 Removed TargetAssistExtended Request.
56 * 06-24-05 01.05.05 Added TargetAssistExtended structures and defines. 56 * 06-24-05 01.05.05 Added TargetAssistExtended structures and defines.
57 * 03-27-06 01.05.06 Added a comment.
57 * -------------------------------------------------------------------------- 58 * --------------------------------------------------------------------------
58 */ 59 */
59 60
@@ -351,7 +352,7 @@ typedef struct _MSG_TARGET_ASSIST_REQUEST
351#define TARGET_ASSIST_FLAGS_CONFIRMED (0x08) 352#define TARGET_ASSIST_FLAGS_CONFIRMED (0x08)
352#define TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER (0x80) 353#define TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER (0x80)
353 354
354 355/* Standard Target Mode Reply message */
355typedef struct _MSG_TARGET_ERROR_REPLY 356typedef struct _MSG_TARGET_ERROR_REPLY
356{ 357{
357 U16 Reserved; /* 00h */ 358 U16 Reserved; /* 00h */
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-25 20:05:53 -0500