1 files changed, 4 insertions, 4 deletions

diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index fc1267b8c892..9a155396d6ac 100644
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -500,14 +500,14 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
 
 /*      New design (By Emard)
 **      this rps1 code will copy internal HS event to GPIO3 pin.
-**      GPIO3 is in budget-patch hardware connectd to port B VSYNC
+**      GPIO3 is in budget-patch hardware connected to port B VSYNC
 
 **      HS is an internal event of 7146, accessible with RPS
 **      and temporarily raised high every n lines
 **      (n in defined in the RPS_THRESH1 counter threshold)
 **      I think HS is raised high on the beginning of the n-th line
 **      and remains high until this n-th line that triggered
-**      it is completely received. When the receiption of n-th line
+**      it is completely received. When the reception of n-th line
 **      ends, HS is lowered.
 
 **      To transmit data over DMA, 7146 needs changing state at
@@ -541,7 +541,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
 **      hardware debug note: a working budget card (including budget patch)
 **      with vpeirq() interrupt setup in mode "0x90" (every 64K) will
 **      generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes
-**      and that means 3*25=75 Hz of interrupt freqency, as seen by
+**      and that means 3*25=75 Hz of interrupt frequency, as seen by
 **      watch cat /proc/interrupts
 **
 **      If this frequency is 3x lower (and data received in the DMA
@@ -550,7 +550,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
 **      this means VSYNC line is not connected in the hardware.
 **      (check soldering pcb and pins)
 **      The same behaviour of missing VSYNC can be duplicated on budget
-**      cards, by seting DD1_INIT trigger mode 7 in 3rd nibble.
+**      cards, by setting DD1_INIT trigger mode 7 in 3rd nibble.
 */
 
         // Setup RPS1 "program" (p35)