diff options
Diffstat (limited to 'drivers/media/video/tda9875.c')
-rw-r--r-- | drivers/media/video/tda9875.c | 423 |
1 files changed, 423 insertions, 0 deletions
diff --git a/drivers/media/video/tda9875.c b/drivers/media/video/tda9875.c new file mode 100644 index 000000000000..4f1114c033a1 --- /dev/null +++ b/drivers/media/video/tda9875.c | |||
@@ -0,0 +1,423 @@ | |||
1 | /* | ||
2 | * For the TDA9875 chip | ||
3 | * (The TDA9875 is used on the Diamond DTV2000 french version | ||
4 | * Other cards probably use these chips as well.) | ||
5 | * This driver will not complain if used with any | ||
6 | * other i2c device with the same address. | ||
7 | * | ||
8 | * Copyright (c) 2000 Guillaume Delvit based on Gerd Knorr source and | ||
9 | * Eric Sandeen | ||
10 | * This code is placed under the terms of the GNU General Public License | ||
11 | * Based on tda9855.c by Steve VanDeBogart (vandebo@uclink.berkeley.edu) | ||
12 | * Which was based on tda8425.c by Greg Alexander (c) 1998 | ||
13 | * | ||
14 | * OPTIONS: | ||
15 | * debug - set to 1 if you'd like to see debug messages | ||
16 | * | ||
17 | * Revision: 0.1 - original version | ||
18 | */ | ||
19 | |||
20 | #include <linux/module.h> | ||
21 | #include <linux/kernel.h> | ||
22 | #include <linux/sched.h> | ||
23 | #include <linux/string.h> | ||
24 | #include <linux/timer.h> | ||
25 | #include <linux/delay.h> | ||
26 | #include <linux/errno.h> | ||
27 | #include <linux/slab.h> | ||
28 | #include <linux/videodev.h> | ||
29 | #include <linux/i2c.h> | ||
30 | #include <linux/i2c-algo-bit.h> | ||
31 | #include <linux/init.h> | ||
32 | |||
33 | #include "bttv.h" | ||
34 | #include <media/audiochip.h> | ||
35 | #include <media/id.h> | ||
36 | |||
37 | static int debug; /* insmod parameter */ | ||
38 | module_param(debug, int, S_IRUGO | S_IWUSR); | ||
39 | MODULE_LICENSE("GPL"); | ||
40 | |||
41 | |||
42 | /* Addresses to scan */ | ||
43 | static unsigned short normal_i2c[] = { | ||
44 | I2C_TDA9875 >> 1, | ||
45 | I2C_CLIENT_END | ||
46 | }; | ||
47 | static unsigned short normal_i2c_range[] = {I2C_CLIENT_END}; | ||
48 | I2C_CLIENT_INSMOD; | ||
49 | |||
50 | /* This is a superset of the TDA9875 */ | ||
51 | struct tda9875 { | ||
52 | int mode; | ||
53 | int rvol, lvol; | ||
54 | int bass, treble; | ||
55 | struct i2c_client c; | ||
56 | }; | ||
57 | |||
58 | static struct i2c_driver driver; | ||
59 | static struct i2c_client client_template; | ||
60 | |||
61 | #define dprintk if (debug) printk | ||
62 | |||
63 | /* The TDA9875 is made by Philips Semiconductor | ||
64 | * http://www.semiconductors.philips.com | ||
65 | * TDA9875: I2C-bus controlled DSP audio processor, FM demodulator | ||
66 | * | ||
67 | */ | ||
68 | |||
69 | /* subaddresses for TDA9875 */ | ||
70 | #define TDA9875_MUT 0x12 /*General mute (value --> 0b11001100*/ | ||
71 | #define TDA9875_CFG 0x01 /* Config register (value --> 0b00000000 */ | ||
72 | #define TDA9875_DACOS 0x13 /*DAC i/o select (ADC) 0b0000100*/ | ||
73 | #define TDA9875_LOSR 0x16 /*Line output select regirter 0b0100 0001*/ | ||
74 | |||
75 | #define TDA9875_CH1V 0x0c /*Channel 1 volume (mute)*/ | ||
76 | #define TDA9875_CH2V 0x0d /*Channel 2 volume (mute)*/ | ||
77 | #define TDA9875_SC1 0x14 /*SCART 1 in (mono)*/ | ||
78 | #define TDA9875_SC2 0x15 /*SCART 2 in (mono)*/ | ||
79 | |||
80 | #define TDA9875_ADCIS 0x17 /*ADC input select (mono) 0b0110 000*/ | ||
81 | #define TDA9875_AER 0x19 /*Audio effect (AVL+Pseudo) 0b0000 0110*/ | ||
82 | #define TDA9875_MCS 0x18 /*Main channel select (DAC) 0b0000100*/ | ||
83 | #define TDA9875_MVL 0x1a /* Main volume gauche */ | ||
84 | #define TDA9875_MVR 0x1b /* Main volume droite */ | ||
85 | #define TDA9875_MBA 0x1d /* Main Basse */ | ||
86 | #define TDA9875_MTR 0x1e /* Main treble */ | ||
87 | #define TDA9875_ACS 0x1f /* Auxilary channel select (FM) 0b0000000*/ | ||
88 | #define TDA9875_AVL 0x20 /* Auxilary volume gauche */ | ||
89 | #define TDA9875_AVR 0x21 /* Auxilary volume droite */ | ||
90 | #define TDA9875_ABA 0x22 /* Auxilary Basse */ | ||
91 | #define TDA9875_ATR 0x23 /* Auxilary treble */ | ||
92 | |||
93 | #define TDA9875_MSR 0x02 /* Monitor select register */ | ||
94 | #define TDA9875_C1MSB 0x03 /* Carrier 1 (FM) frequency register MSB */ | ||
95 | #define TDA9875_C1MIB 0x04 /* Carrier 1 (FM) frequency register (16-8]b */ | ||
96 | #define TDA9875_C1LSB 0x05 /* Carrier 1 (FM) frequency register LSB */ | ||
97 | #define TDA9875_C2MSB 0x06 /* Carrier 2 (nicam) frequency register MSB */ | ||
98 | #define TDA9875_C2MIB 0x07 /* Carrier 2 (nicam) frequency register (16-8]b */ | ||
99 | #define TDA9875_C2LSB 0x08 /* Carrier 2 (nicam) frequency register LSB */ | ||
100 | #define TDA9875_DCR 0x09 /* Demodulateur configuration regirter*/ | ||
101 | #define TDA9875_DEEM 0x0a /* FM de-emphasis regirter*/ | ||
102 | #define TDA9875_FMAT 0x0b /* FM Matrix regirter*/ | ||
103 | |||
104 | /* values */ | ||
105 | #define TDA9875_MUTE_ON 0xff /* general mute */ | ||
106 | #define TDA9875_MUTE_OFF 0xcc /* general no mute */ | ||
107 | |||
108 | |||
109 | |||
110 | /* Begin code */ | ||
111 | |||
112 | static int tda9875_write(struct i2c_client *client, int subaddr, unsigned char val) | ||
113 | { | ||
114 | unsigned char buffer[2]; | ||
115 | dprintk("In tda9875_write\n"); | ||
116 | dprintk("Writing %d 0x%x\n", subaddr, val); | ||
117 | buffer[0] = subaddr; | ||
118 | buffer[1] = val; | ||
119 | if (2 != i2c_master_send(client,buffer,2)) { | ||
120 | printk(KERN_WARNING "tda9875: I/O error, trying (write %d 0x%x)\n", | ||
121 | subaddr, val); | ||
122 | return -1; | ||
123 | } | ||
124 | return 0; | ||
125 | } | ||
126 | |||
127 | #if 0 | ||
128 | static int tda9875_read(struct i2c_client *client) | ||
129 | { | ||
130 | unsigned char buffer; | ||
131 | dprintk("In tda9875_read\n"); | ||
132 | if (1 != i2c_master_recv(client,&buffer,1)) { | ||
133 | printk(KERN_WARNING "tda9875: I/O error, trying (read)\n"); | ||
134 | return -1; | ||
135 | } | ||
136 | dprintk("Read 0x%02x\n", buffer); | ||
137 | return buffer; | ||
138 | } | ||
139 | #endif | ||
140 | |||
141 | static int i2c_read_register(struct i2c_adapter *adap, int addr, int reg) | ||
142 | { | ||
143 | unsigned char write[1]; | ||
144 | unsigned char read[1]; | ||
145 | struct i2c_msg msgs[2] = { | ||
146 | { addr, 0, 1, write }, | ||
147 | { addr, I2C_M_RD, 1, read } | ||
148 | }; | ||
149 | write[0] = reg; | ||
150 | |||
151 | if (2 != i2c_transfer(adap,msgs,2)) { | ||
152 | printk(KERN_WARNING "tda9875: I/O error (read2)\n"); | ||
153 | return -1; | ||
154 | } | ||
155 | dprintk("tda9875: chip_read2: reg%d=0x%x\n",reg,read[0]); | ||
156 | return read[0]; | ||
157 | } | ||
158 | |||
159 | static void tda9875_set(struct i2c_client *client) | ||
160 | { | ||
161 | struct tda9875 *tda = i2c_get_clientdata(client); | ||
162 | unsigned char a; | ||
163 | |||
164 | dprintk(KERN_DEBUG "tda9875_set(%04x,%04x,%04x,%04x)\n", | ||
165 | tda->lvol,tda->rvol,tda->bass,tda->treble); | ||
166 | |||
167 | |||
168 | a = tda->lvol & 0xff; | ||
169 | tda9875_write(client, TDA9875_MVL, a); | ||
170 | a =tda->rvol & 0xff; | ||
171 | tda9875_write(client, TDA9875_MVR, a); | ||
172 | a =tda->bass & 0xff; | ||
173 | tda9875_write(client, TDA9875_MBA, a); | ||
174 | a =tda->treble & 0xff; | ||
175 | tda9875_write(client, TDA9875_MTR, a); | ||
176 | } | ||
177 | |||
178 | static void do_tda9875_init(struct i2c_client *client) | ||
179 | { | ||
180 | struct tda9875 *t = i2c_get_clientdata(client); | ||
181 | dprintk("In tda9875_init\n"); | ||
182 | tda9875_write(client, TDA9875_CFG, 0xd0 ); /*reg de config 0 (reset)*/ | ||
183 | tda9875_write(client, TDA9875_MSR, 0x03 ); /* Monitor 0b00000XXX*/ | ||
184 | tda9875_write(client, TDA9875_C1MSB, 0x00 ); /*Car1(FM) MSB XMHz*/ | ||
185 | tda9875_write(client, TDA9875_C1MIB, 0x00 ); /*Car1(FM) MIB XMHz*/ | ||
186 | tda9875_write(client, TDA9875_C1LSB, 0x00 ); /*Car1(FM) LSB XMHz*/ | ||
187 | tda9875_write(client, TDA9875_C2MSB, 0x00 ); /*Car2(NICAM) MSB XMHz*/ | ||
188 | tda9875_write(client, TDA9875_C2MIB, 0x00 ); /*Car2(NICAM) MIB XMHz*/ | ||
189 | tda9875_write(client, TDA9875_C2LSB, 0x00 ); /*Car2(NICAM) LSB XMHz*/ | ||
190 | tda9875_write(client, TDA9875_DCR, 0x00 ); /*Demod config 0x00*/ | ||
191 | tda9875_write(client, TDA9875_DEEM, 0x44 ); /*DE-Emph 0b0100 0100*/ | ||
192 | tda9875_write(client, TDA9875_FMAT, 0x00 ); /*FM Matrix reg 0x00*/ | ||
193 | tda9875_write(client, TDA9875_SC1, 0x00 ); /* SCART 1 (SC1)*/ | ||
194 | tda9875_write(client, TDA9875_SC2, 0x01 ); /* SCART 2 (sc2)*/ | ||
195 | |||
196 | tda9875_write(client, TDA9875_CH1V, 0x10 ); /* Channel volume 1 mute*/ | ||
197 | tda9875_write(client, TDA9875_CH2V, 0x10 ); /* Channel volume 2 mute */ | ||
198 | tda9875_write(client, TDA9875_DACOS, 0x02 ); /* sig DAC i/o(in:nicam)*/ | ||
199 | tda9875_write(client, TDA9875_ADCIS, 0x6f ); /* sig ADC input(in:mono)*/ | ||
200 | tda9875_write(client, TDA9875_LOSR, 0x00 ); /* line out (in:mono)*/ | ||
201 | tda9875_write(client, TDA9875_AER, 0x00 ); /*06 Effect (AVL+PSEUDO) */ | ||
202 | tda9875_write(client, TDA9875_MCS, 0x44 ); /* Main ch select (DAC) */ | ||
203 | tda9875_write(client, TDA9875_MVL, 0x03 ); /* Vol Main left 10dB */ | ||
204 | tda9875_write(client, TDA9875_MVR, 0x03 ); /* Vol Main right 10dB*/ | ||
205 | tda9875_write(client, TDA9875_MBA, 0x00 ); /* Main Bass Main 0dB*/ | ||
206 | tda9875_write(client, TDA9875_MTR, 0x00 ); /* Main Treble Main 0dB*/ | ||
207 | tda9875_write(client, TDA9875_ACS, 0x44 ); /* Aux chan select (dac)*/ | ||
208 | tda9875_write(client, TDA9875_AVL, 0x00 ); /* Vol Aux left 0dB*/ | ||
209 | tda9875_write(client, TDA9875_AVR, 0x00 ); /* Vol Aux right 0dB*/ | ||
210 | tda9875_write(client, TDA9875_ABA, 0x00 ); /* Aux Bass Main 0dB*/ | ||
211 | tda9875_write(client, TDA9875_ATR, 0x00 ); /* Aux Aigus Main 0dB*/ | ||
212 | |||
213 | tda9875_write(client, TDA9875_MUT, 0xcc ); /* General mute */ | ||
214 | |||
215 | t->mode=AUDIO_UNMUTE; | ||
216 | t->lvol=t->rvol =0; /* 0dB */ | ||
217 | t->bass=0; /* 0dB */ | ||
218 | t->treble=0; /* 0dB */ | ||
219 | tda9875_set(client); | ||
220 | |||
221 | } | ||
222 | |||
223 | |||
224 | /* *********************** * | ||
225 | * i2c interface functions * | ||
226 | * *********************** */ | ||
227 | |||
228 | static int tda9875_checkit(struct i2c_adapter *adap, int addr) | ||
229 | { | ||
230 | int dic,rev; | ||
231 | |||
232 | dic=i2c_read_register(adap,addr,254); | ||
233 | rev=i2c_read_register(adap,addr,255); | ||
234 | |||
235 | if(dic==0 || dic==2) { // tda9875 and tda9875A | ||
236 | printk("tda9875: TDA9875%s Rev.%d detected at 0x%x\n", | ||
237 | dic==0?"":"A", rev,addr<<1); | ||
238 | return 1; | ||
239 | } | ||
240 | printk("tda9875: no such chip at 0x%x (dic=0x%x rev=0x%x)\n",addr<<1,dic,rev); | ||
241 | return(0); | ||
242 | } | ||
243 | |||
244 | static int tda9875_attach(struct i2c_adapter *adap, int addr, int kind) | ||
245 | { | ||
246 | struct tda9875 *t; | ||
247 | struct i2c_client *client; | ||
248 | dprintk("In tda9875_attach\n"); | ||
249 | |||
250 | t = kmalloc(sizeof *t,GFP_KERNEL); | ||
251 | if (!t) | ||
252 | return -ENOMEM; | ||
253 | memset(t,0,sizeof *t); | ||
254 | |||
255 | client = &t->c; | ||
256 | memcpy(client,&client_template,sizeof(struct i2c_client)); | ||
257 | client->adapter = adap; | ||
258 | client->addr = addr; | ||
259 | i2c_set_clientdata(client, t); | ||
260 | |||
261 | if(!tda9875_checkit(adap,addr)) { | ||
262 | kfree(t); | ||
263 | return 1; | ||
264 | } | ||
265 | |||
266 | do_tda9875_init(client); | ||
267 | printk(KERN_INFO "tda9875: init\n"); | ||
268 | |||
269 | i2c_attach_client(client); | ||
270 | return 0; | ||
271 | } | ||
272 | |||
273 | static int tda9875_probe(struct i2c_adapter *adap) | ||
274 | { | ||
275 | #ifdef I2C_CLASS_TV_ANALOG | ||
276 | if (adap->class & I2C_CLASS_TV_ANALOG) | ||
277 | return i2c_probe(adap, &addr_data, tda9875_attach); | ||
278 | #else | ||
279 | if (adap->id == (I2C_ALGO_BIT | I2C_HW_B_BT848)) | ||
280 | return i2c_probe(adap, &addr_data, tda9875_attach); | ||
281 | #endif | ||
282 | return 0; | ||
283 | } | ||
284 | |||
285 | static int tda9875_detach(struct i2c_client *client) | ||
286 | { | ||
287 | struct tda9875 *t = i2c_get_clientdata(client); | ||
288 | |||
289 | do_tda9875_init(client); | ||
290 | i2c_detach_client(client); | ||
291 | |||
292 | kfree(t); | ||
293 | return 0; | ||
294 | } | ||
295 | |||
296 | static int tda9875_command(struct i2c_client *client, | ||
297 | unsigned int cmd, void *arg) | ||
298 | { | ||
299 | struct tda9875 *t = i2c_get_clientdata(client); | ||
300 | |||
301 | dprintk("In tda9875_command...\n"); | ||
302 | |||
303 | switch (cmd) { | ||
304 | /* --- v4l ioctls --- */ | ||
305 | /* take care: bttv does userspace copying, we'll get a | ||
306 | kernel pointer here... */ | ||
307 | case VIDIOCGAUDIO: | ||
308 | { | ||
309 | struct video_audio *va = arg; | ||
310 | int left,right; | ||
311 | |||
312 | dprintk("VIDIOCGAUDIO\n"); | ||
313 | |||
314 | va->flags |= VIDEO_AUDIO_VOLUME | | ||
315 | VIDEO_AUDIO_BASS | | ||
316 | VIDEO_AUDIO_TREBLE; | ||
317 | |||
318 | /* min is -84 max is 24 */ | ||
319 | left = (t->lvol+84)*606; | ||
320 | right = (t->rvol+84)*606; | ||
321 | va->volume=max(left,right); | ||
322 | va->balance=(32768*min(left,right))/ | ||
323 | (va->volume ? va->volume : 1); | ||
324 | va->balance=(left<right)? | ||
325 | (65535-va->balance) : va->balance; | ||
326 | va->bass = (t->bass+12)*2427; /* min -12 max +15 */ | ||
327 | va->treble = (t->treble+12)*2730;/* min -12 max +12 */ | ||
328 | va->mode |= VIDEO_SOUND_MONO; | ||
329 | |||
330 | break; /* VIDIOCGAUDIO case */ | ||
331 | } | ||
332 | |||
333 | case VIDIOCSAUDIO: | ||
334 | { | ||
335 | struct video_audio *va = arg; | ||
336 | int left,right; | ||
337 | |||
338 | dprintk("VIDEOCSAUDIO...\n"); | ||
339 | left = (min(65536 - va->balance,32768) * | ||
340 | va->volume) / 32768; | ||
341 | right = (min(va->balance,(__u16)32768) * | ||
342 | va->volume) / 32768; | ||
343 | t->lvol = ((left/606)-84) & 0xff; | ||
344 | if (t->lvol > 24) | ||
345 | t->lvol = 24; | ||
346 | if (t->lvol < -84) | ||
347 | t->lvol = -84 & 0xff; | ||
348 | |||
349 | t->rvol = ((right/606)-84) & 0xff; | ||
350 | if (t->rvol > 24) | ||
351 | t->rvol = 24; | ||
352 | if (t->rvol < -84) | ||
353 | t->rvol = -84 & 0xff; | ||
354 | |||
355 | t->bass = ((va->bass/2400)-12) & 0xff; | ||
356 | if (t->bass > 15) | ||
357 | t->bass = 15; | ||
358 | if (t->bass < -12) | ||
359 | t->bass = -12 & 0xff; | ||
360 | |||
361 | t->treble = ((va->treble/2700)-12) & 0xff; | ||
362 | if (t->treble > 12) | ||
363 | t->treble = 12; | ||
364 | if (t->treble < -12) | ||
365 | t->treble = -12 & 0xff; | ||
366 | |||
367 | |||
368 | |||
369 | //printk("tda9875 bal:%04x vol:%04x bass:%04x treble:%04x\n",va->balance,va->volume,va->bass,va->treble); | ||
370 | |||
371 | |||
372 | tda9875_set(client); | ||
373 | |||
374 | break; | ||
375 | |||
376 | } /* end of VIDEOCSAUDIO case */ | ||
377 | |||
378 | default: /* Not VIDEOCGAUDIO or VIDEOCSAUDIO */ | ||
379 | |||
380 | /* nothing */ | ||
381 | dprintk("Default\n"); | ||
382 | |||
383 | } /* end of (cmd) switch */ | ||
384 | |||
385 | return 0; | ||
386 | } | ||
387 | |||
388 | |||
389 | static struct i2c_driver driver = { | ||
390 | .owner = THIS_MODULE, | ||
391 | .name = "i2c tda9875 driver", | ||
392 | .id = I2C_DRIVERID_TDA9875, | ||
393 | .flags = I2C_DF_NOTIFY, | ||
394 | .attach_adapter = tda9875_probe, | ||
395 | .detach_client = tda9875_detach, | ||
396 | .command = tda9875_command, | ||
397 | }; | ||
398 | |||
399 | static struct i2c_client client_template = | ||
400 | { | ||
401 | I2C_DEVNAME("tda9875"), | ||
402 | .driver = &driver, | ||
403 | }; | ||
404 | |||
405 | static int __init tda9875_init(void) | ||
406 | { | ||
407 | return i2c_add_driver(&driver); | ||
408 | } | ||
409 | |||
410 | static void __exit tda9875_fini(void) | ||
411 | { | ||
412 | i2c_del_driver(&driver); | ||
413 | } | ||
414 | |||
415 | module_init(tda9875_init); | ||
416 | module_exit(tda9875_fini); | ||
417 | |||
418 | /* | ||
419 | * Local variables: | ||
420 | * c-basic-offset: 8 | ||
421 | * End: | ||
422 | */ | ||
423 | |||