diff options
Diffstat (limited to 'drivers/media/video/ovcamchip/ov7x20.c')
-rw-r--r-- | drivers/media/video/ovcamchip/ov7x20.c | 455 |
1 files changed, 455 insertions, 0 deletions
diff --git a/drivers/media/video/ovcamchip/ov7x20.c b/drivers/media/video/ovcamchip/ov7x20.c new file mode 100644 index 000000000000..3c8c48f338ba --- /dev/null +++ b/drivers/media/video/ovcamchip/ov7x20.c | |||
@@ -0,0 +1,455 @@ | |||
1 | /* OmniVision OV7620/OV7120 Camera Chip Support Code | ||
2 | * | ||
3 | * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org> | ||
4 | * http://alpha.dyndns.org/ov511/ | ||
5 | * | ||
6 | * OV7620 fixes by Charl P. Botha <cpbotha@ieee.org> | ||
7 | * | ||
8 | * This program is free software; you can redistribute it and/or modify it | ||
9 | * under the terms of the GNU General Public License as published by the | ||
10 | * Free Software Foundation; either version 2 of the License, or (at your | ||
11 | * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied. | ||
12 | */ | ||
13 | |||
14 | #define DEBUG | ||
15 | |||
16 | #include <linux/slab.h> | ||
17 | #include "ovcamchip_priv.h" | ||
18 | |||
19 | /* Registers */ | ||
20 | #define REG_GAIN 0x00 /* gain [5:0] */ | ||
21 | #define REG_BLUE 0x01 /* blue gain */ | ||
22 | #define REG_RED 0x02 /* red gain */ | ||
23 | #define REG_SAT 0x03 /* saturation */ | ||
24 | #define REG_BRT 0x06 /* Y brightness */ | ||
25 | #define REG_SHARP 0x07 /* analog sharpness */ | ||
26 | #define REG_BLUE_BIAS 0x0C /* WB blue ratio [5:0] */ | ||
27 | #define REG_RED_BIAS 0x0D /* WB red ratio [5:0] */ | ||
28 | #define REG_EXP 0x10 /* exposure */ | ||
29 | |||
30 | /* Default control settings. Values are in terms of V4L2 controls. */ | ||
31 | #define OV7120_DFL_BRIGHT 0x60 | ||
32 | #define OV7620_DFL_BRIGHT 0x60 | ||
33 | #define OV7120_DFL_SAT 0xb0 | ||
34 | #define OV7620_DFL_SAT 0xc0 | ||
35 | #define DFL_AUTO_EXP 1 | ||
36 | #define DFL_AUTO_GAIN 1 | ||
37 | #define OV7120_DFL_GAIN 0x00 | ||
38 | #define OV7620_DFL_GAIN 0x00 | ||
39 | /* NOTE: Since autoexposure is the default, these aren't programmed into the | ||
40 | * OV7x20 chip. They are just here because V4L2 expects a default */ | ||
41 | #define OV7120_DFL_EXP 0x7f | ||
42 | #define OV7620_DFL_EXP 0x7f | ||
43 | |||
44 | /* Window parameters */ | ||
45 | #define HWSBASE 0x2F /* From 7620.SET (spec is wrong) */ | ||
46 | #define HWEBASE 0x2F | ||
47 | #define VWSBASE 0x05 | ||
48 | #define VWEBASE 0x05 | ||
49 | |||
50 | struct ov7x20 { | ||
51 | int auto_brt; | ||
52 | int auto_exp; | ||
53 | int auto_gain; | ||
54 | int backlight; | ||
55 | int bandfilt; | ||
56 | int mirror; | ||
57 | }; | ||
58 | |||
59 | /* Contrast look-up table */ | ||
60 | static unsigned char ctab[] = { | ||
61 | 0x01, 0x05, 0x09, 0x11, 0x15, 0x35, 0x37, 0x57, | ||
62 | 0x5b, 0xa5, 0xa7, 0xc7, 0xc9, 0xcf, 0xef, 0xff | ||
63 | }; | ||
64 | |||
65 | /* Settings for (Black & White) OV7120 camera chip */ | ||
66 | static struct ovcamchip_regvals regvals_init_7120[] = { | ||
67 | { 0x12, 0x80 }, /* reset */ | ||
68 | { 0x13, 0x00 }, /* Autoadjust off */ | ||
69 | { 0x12, 0x20 }, /* Disable AWB */ | ||
70 | { 0x13, DFL_AUTO_GAIN?0x01:0x00 }, /* Autoadjust on (if desired) */ | ||
71 | { 0x00, OV7120_DFL_GAIN }, | ||
72 | { 0x01, 0x80 }, | ||
73 | { 0x02, 0x80 }, | ||
74 | { 0x03, OV7120_DFL_SAT }, | ||
75 | { 0x06, OV7120_DFL_BRIGHT }, | ||
76 | { 0x07, 0x00 }, | ||
77 | { 0x0c, 0x20 }, | ||
78 | { 0x0d, 0x20 }, | ||
79 | { 0x11, 0x01 }, | ||
80 | { 0x14, 0x84 }, | ||
81 | { 0x15, 0x01 }, | ||
82 | { 0x16, 0x03 }, | ||
83 | { 0x17, 0x2f }, | ||
84 | { 0x18, 0xcf }, | ||
85 | { 0x19, 0x06 }, | ||
86 | { 0x1a, 0xf5 }, | ||
87 | { 0x1b, 0x00 }, | ||
88 | { 0x20, 0x08 }, | ||
89 | { 0x21, 0x80 }, | ||
90 | { 0x22, 0x80 }, | ||
91 | { 0x23, 0x00 }, | ||
92 | { 0x26, 0xa0 }, | ||
93 | { 0x27, 0xfa }, | ||
94 | { 0x28, 0x20 }, /* DON'T set bit 6. It is for the OV7620 only */ | ||
95 | { 0x29, DFL_AUTO_EXP?0x00:0x80 }, | ||
96 | { 0x2a, 0x10 }, | ||
97 | { 0x2b, 0x00 }, | ||
98 | { 0x2c, 0x88 }, | ||
99 | { 0x2d, 0x95 }, | ||
100 | { 0x2e, 0x80 }, | ||
101 | { 0x2f, 0x44 }, | ||
102 | { 0x60, 0x20 }, | ||
103 | { 0x61, 0x02 }, | ||
104 | { 0x62, 0x5f }, | ||
105 | { 0x63, 0xd5 }, | ||
106 | { 0x64, 0x57 }, | ||
107 | { 0x65, 0x83 }, /* OV says "don't change this value" */ | ||
108 | { 0x66, 0x55 }, | ||
109 | { 0x67, 0x92 }, | ||
110 | { 0x68, 0xcf }, | ||
111 | { 0x69, 0x76 }, | ||
112 | { 0x6a, 0x22 }, | ||
113 | { 0x6b, 0xe2 }, | ||
114 | { 0x6c, 0x40 }, | ||
115 | { 0x6d, 0x48 }, | ||
116 | { 0x6e, 0x80 }, | ||
117 | { 0x6f, 0x0d }, | ||
118 | { 0x70, 0x89 }, | ||
119 | { 0x71, 0x00 }, | ||
120 | { 0x72, 0x14 }, | ||
121 | { 0x73, 0x54 }, | ||
122 | { 0x74, 0xa0 }, | ||
123 | { 0x75, 0x8e }, | ||
124 | { 0x76, 0x00 }, | ||
125 | { 0x77, 0xff }, | ||
126 | { 0x78, 0x80 }, | ||
127 | { 0x79, 0x80 }, | ||
128 | { 0x7a, 0x80 }, | ||
129 | { 0x7b, 0xe6 }, | ||
130 | { 0x7c, 0x00 }, | ||
131 | { 0x24, 0x3a }, | ||
132 | { 0x25, 0x60 }, | ||
133 | { 0xff, 0xff }, /* END MARKER */ | ||
134 | }; | ||
135 | |||
136 | /* Settings for (color) OV7620 camera chip */ | ||
137 | static struct ovcamchip_regvals regvals_init_7620[] = { | ||
138 | { 0x12, 0x80 }, /* reset */ | ||
139 | { 0x00, OV7620_DFL_GAIN }, | ||
140 | { 0x01, 0x80 }, | ||
141 | { 0x02, 0x80 }, | ||
142 | { 0x03, OV7620_DFL_SAT }, | ||
143 | { 0x06, OV7620_DFL_BRIGHT }, | ||
144 | { 0x07, 0x00 }, | ||
145 | { 0x0c, 0x24 }, | ||
146 | { 0x0c, 0x24 }, | ||
147 | { 0x0d, 0x24 }, | ||
148 | { 0x11, 0x01 }, | ||
149 | { 0x12, 0x24 }, | ||
150 | { 0x13, DFL_AUTO_GAIN?0x01:0x00 }, | ||
151 | { 0x14, 0x84 }, | ||
152 | { 0x15, 0x01 }, | ||
153 | { 0x16, 0x03 }, | ||
154 | { 0x17, 0x2f }, | ||
155 | { 0x18, 0xcf }, | ||
156 | { 0x19, 0x06 }, | ||
157 | { 0x1a, 0xf5 }, | ||
158 | { 0x1b, 0x00 }, | ||
159 | { 0x20, 0x18 }, | ||
160 | { 0x21, 0x80 }, | ||
161 | { 0x22, 0x80 }, | ||
162 | { 0x23, 0x00 }, | ||
163 | { 0x26, 0xa2 }, | ||
164 | { 0x27, 0xea }, | ||
165 | { 0x28, 0x20 }, | ||
166 | { 0x29, DFL_AUTO_EXP?0x00:0x80 }, | ||
167 | { 0x2a, 0x10 }, | ||
168 | { 0x2b, 0x00 }, | ||
169 | { 0x2c, 0x88 }, | ||
170 | { 0x2d, 0x91 }, | ||
171 | { 0x2e, 0x80 }, | ||
172 | { 0x2f, 0x44 }, | ||
173 | { 0x60, 0x27 }, | ||
174 | { 0x61, 0x02 }, | ||
175 | { 0x62, 0x5f }, | ||
176 | { 0x63, 0xd5 }, | ||
177 | { 0x64, 0x57 }, | ||
178 | { 0x65, 0x83 }, | ||
179 | { 0x66, 0x55 }, | ||
180 | { 0x67, 0x92 }, | ||
181 | { 0x68, 0xcf }, | ||
182 | { 0x69, 0x76 }, | ||
183 | { 0x6a, 0x22 }, | ||
184 | { 0x6b, 0x00 }, | ||
185 | { 0x6c, 0x02 }, | ||
186 | { 0x6d, 0x44 }, | ||
187 | { 0x6e, 0x80 }, | ||
188 | { 0x6f, 0x1d }, | ||
189 | { 0x70, 0x8b }, | ||
190 | { 0x71, 0x00 }, | ||
191 | { 0x72, 0x14 }, | ||
192 | { 0x73, 0x54 }, | ||
193 | { 0x74, 0x00 }, | ||
194 | { 0x75, 0x8e }, | ||
195 | { 0x76, 0x00 }, | ||
196 | { 0x77, 0xff }, | ||
197 | { 0x78, 0x80 }, | ||
198 | { 0x79, 0x80 }, | ||
199 | { 0x7a, 0x80 }, | ||
200 | { 0x7b, 0xe2 }, | ||
201 | { 0x7c, 0x00 }, | ||
202 | { 0xff, 0xff }, /* END MARKER */ | ||
203 | }; | ||
204 | |||
205 | /* Returns index into the specified look-up table, with 'n' elements, for which | ||
206 | * the value is greater than or equal to "val". If a match isn't found, (n-1) | ||
207 | * is returned. The entries in the table must be in ascending order. */ | ||
208 | static inline int ov7x20_lut_find(unsigned char lut[], int n, unsigned char val) | ||
209 | { | ||
210 | int i = 0; | ||
211 | |||
212 | while (lut[i] < val && i < n) | ||
213 | i++; | ||
214 | |||
215 | return i; | ||
216 | } | ||
217 | |||
218 | /* This initializes the OV7x20 camera chip and relevant variables. */ | ||
219 | static int ov7x20_init(struct i2c_client *c) | ||
220 | { | ||
221 | struct ovcamchip *ov = i2c_get_clientdata(c); | ||
222 | struct ov7x20 *s; | ||
223 | int rc; | ||
224 | |||
225 | DDEBUG(4, &c->dev, "entered"); | ||
226 | |||
227 | if (ov->mono) | ||
228 | rc = ov_write_regvals(c, regvals_init_7120); | ||
229 | else | ||
230 | rc = ov_write_regvals(c, regvals_init_7620); | ||
231 | |||
232 | if (rc < 0) | ||
233 | return rc; | ||
234 | |||
235 | ov->spriv = s = kmalloc(sizeof *s, GFP_KERNEL); | ||
236 | if (!s) | ||
237 | return -ENOMEM; | ||
238 | memset(s, 0, sizeof *s); | ||
239 | |||
240 | s->auto_brt = 1; | ||
241 | s->auto_exp = DFL_AUTO_EXP; | ||
242 | s->auto_gain = DFL_AUTO_GAIN; | ||
243 | |||
244 | return 0; | ||
245 | } | ||
246 | |||
247 | static int ov7x20_free(struct i2c_client *c) | ||
248 | { | ||
249 | struct ovcamchip *ov = i2c_get_clientdata(c); | ||
250 | |||
251 | kfree(ov->spriv); | ||
252 | return 0; | ||
253 | } | ||
254 | |||
255 | static int ov7x20_set_v4l1_control(struct i2c_client *c, | ||
256 | struct ovcamchip_control *ctl) | ||
257 | { | ||
258 | struct ovcamchip *ov = i2c_get_clientdata(c); | ||
259 | struct ov7x20 *s = ov->spriv; | ||
260 | int rc; | ||
261 | int v = ctl->value; | ||
262 | |||
263 | switch (ctl->id) { | ||
264 | case OVCAMCHIP_CID_CONT: | ||
265 | { | ||
266 | /* Use Y gamma control instead. Bit 0 enables it. */ | ||
267 | rc = ov_write(c, 0x64, ctab[v >> 12]); | ||
268 | break; | ||
269 | } | ||
270 | case OVCAMCHIP_CID_BRIGHT: | ||
271 | /* 7620 doesn't like manual changes when in auto mode */ | ||
272 | if (!s->auto_brt) | ||
273 | rc = ov_write(c, REG_BRT, v >> 8); | ||
274 | else | ||
275 | rc = 0; | ||
276 | break; | ||
277 | case OVCAMCHIP_CID_SAT: | ||
278 | rc = ov_write(c, REG_SAT, v >> 8); | ||
279 | break; | ||
280 | case OVCAMCHIP_CID_EXP: | ||
281 | if (!s->auto_exp) | ||
282 | rc = ov_write(c, REG_EXP, v); | ||
283 | else | ||
284 | rc = -EBUSY; | ||
285 | break; | ||
286 | case OVCAMCHIP_CID_FREQ: | ||
287 | { | ||
288 | int sixty = (v == 60); | ||
289 | |||
290 | rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80); | ||
291 | if (rc < 0) | ||
292 | goto out; | ||
293 | |||
294 | rc = ov_write(c, 0x2b, sixty?0x00:0xac); | ||
295 | if (rc < 0) | ||
296 | goto out; | ||
297 | |||
298 | rc = ov_write_mask(c, 0x76, 0x01, 0x01); | ||
299 | break; | ||
300 | } | ||
301 | case OVCAMCHIP_CID_BANDFILT: | ||
302 | rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04); | ||
303 | s->bandfilt = v; | ||
304 | break; | ||
305 | case OVCAMCHIP_CID_AUTOBRIGHT: | ||
306 | rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10); | ||
307 | s->auto_brt = v; | ||
308 | break; | ||
309 | case OVCAMCHIP_CID_AUTOEXP: | ||
310 | rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01); | ||
311 | s->auto_exp = v; | ||
312 | break; | ||
313 | case OVCAMCHIP_CID_BACKLIGHT: | ||
314 | { | ||
315 | rc = ov_write_mask(c, 0x68, v?0xe0:0xc0, 0xe0); | ||
316 | if (rc < 0) | ||
317 | goto out; | ||
318 | |||
319 | rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08); | ||
320 | if (rc < 0) | ||
321 | goto out; | ||
322 | |||
323 | rc = ov_write_mask(c, 0x28, v?0x02:0x00, 0x02); | ||
324 | s->backlight = v; | ||
325 | break; | ||
326 | } | ||
327 | case OVCAMCHIP_CID_MIRROR: | ||
328 | rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40); | ||
329 | s->mirror = v; | ||
330 | break; | ||
331 | default: | ||
332 | DDEBUG(2, &c->dev, "control not supported: %d", ctl->id); | ||
333 | return -EPERM; | ||
334 | } | ||
335 | |||
336 | out: | ||
337 | DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc); | ||
338 | return rc; | ||
339 | } | ||
340 | |||
341 | static int ov7x20_get_v4l1_control(struct i2c_client *c, | ||
342 | struct ovcamchip_control *ctl) | ||
343 | { | ||
344 | struct ovcamchip *ov = i2c_get_clientdata(c); | ||
345 | struct ov7x20 *s = ov->spriv; | ||
346 | int rc = 0; | ||
347 | unsigned char val = 0; | ||
348 | |||
349 | switch (ctl->id) { | ||
350 | case OVCAMCHIP_CID_CONT: | ||
351 | rc = ov_read(c, 0x64, &val); | ||
352 | ctl->value = ov7x20_lut_find(ctab, 16, val) << 12; | ||
353 | break; | ||
354 | case OVCAMCHIP_CID_BRIGHT: | ||
355 | rc = ov_read(c, REG_BRT, &val); | ||
356 | ctl->value = val << 8; | ||
357 | break; | ||
358 | case OVCAMCHIP_CID_SAT: | ||
359 | rc = ov_read(c, REG_SAT, &val); | ||
360 | ctl->value = val << 8; | ||
361 | break; | ||
362 | case OVCAMCHIP_CID_EXP: | ||
363 | rc = ov_read(c, REG_EXP, &val); | ||
364 | ctl->value = val; | ||
365 | break; | ||
366 | case OVCAMCHIP_CID_BANDFILT: | ||
367 | ctl->value = s->bandfilt; | ||
368 | break; | ||
369 | case OVCAMCHIP_CID_AUTOBRIGHT: | ||
370 | ctl->value = s->auto_brt; | ||
371 | break; | ||
372 | case OVCAMCHIP_CID_AUTOEXP: | ||
373 | ctl->value = s->auto_exp; | ||
374 | break; | ||
375 | case OVCAMCHIP_CID_BACKLIGHT: | ||
376 | ctl->value = s->backlight; | ||
377 | break; | ||
378 | case OVCAMCHIP_CID_MIRROR: | ||
379 | ctl->value = s->mirror; | ||
380 | break; | ||
381 | default: | ||
382 | DDEBUG(2, &c->dev, "control not supported: %d", ctl->id); | ||
383 | return -EPERM; | ||
384 | } | ||
385 | |||
386 | DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc); | ||
387 | return rc; | ||
388 | } | ||
389 | |||
390 | static int ov7x20_mode_init(struct i2c_client *c, struct ovcamchip_window *win) | ||
391 | { | ||
392 | struct ovcamchip *ov = i2c_get_clientdata(c); | ||
393 | int qvga = win->quarter; | ||
394 | |||
395 | /******** QVGA-specific regs ********/ | ||
396 | ov_write_mask(c, 0x14, qvga?0x20:0x00, 0x20); | ||
397 | ov_write_mask(c, 0x28, qvga?0x00:0x20, 0x20); | ||
398 | ov_write(c, 0x24, qvga?0x20:0x3a); | ||
399 | ov_write(c, 0x25, qvga?0x30:0x60); | ||
400 | ov_write_mask(c, 0x2d, qvga?0x40:0x00, 0x40); | ||
401 | if (!ov->mono) | ||
402 | ov_write_mask(c, 0x67, qvga?0xf0:0x90, 0xf0); | ||
403 | ov_write_mask(c, 0x74, qvga?0x20:0x00, 0x20); | ||
404 | |||
405 | /******** Clock programming ********/ | ||
406 | |||
407 | ov_write(c, 0x11, win->clockdiv); | ||
408 | |||
409 | return 0; | ||
410 | } | ||
411 | |||
412 | static int ov7x20_set_window(struct i2c_client *c, struct ovcamchip_window *win) | ||
413 | { | ||
414 | int ret, hwscale, vwscale; | ||
415 | |||
416 | ret = ov7x20_mode_init(c, win); | ||
417 | if (ret < 0) | ||
418 | return ret; | ||
419 | |||
420 | if (win->quarter) { | ||
421 | hwscale = 1; | ||
422 | vwscale = 0; | ||
423 | } else { | ||
424 | hwscale = 2; | ||
425 | vwscale = 1; | ||
426 | } | ||
427 | |||
428 | ov_write(c, 0x17, HWSBASE + (win->x >> hwscale)); | ||
429 | ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale)); | ||
430 | ov_write(c, 0x19, VWSBASE + (win->y >> vwscale)); | ||
431 | ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale)); | ||
432 | |||
433 | return 0; | ||
434 | } | ||
435 | |||
436 | static int ov7x20_command(struct i2c_client *c, unsigned int cmd, void *arg) | ||
437 | { | ||
438 | switch (cmd) { | ||
439 | case OVCAMCHIP_CMD_S_CTRL: | ||
440 | return ov7x20_set_v4l1_control(c, arg); | ||
441 | case OVCAMCHIP_CMD_G_CTRL: | ||
442 | return ov7x20_get_v4l1_control(c, arg); | ||
443 | case OVCAMCHIP_CMD_S_MODE: | ||
444 | return ov7x20_set_window(c, arg); | ||
445 | default: | ||
446 | DDEBUG(2, &c->dev, "command not supported: %d", cmd); | ||
447 | return -ENOIOCTLCMD; | ||
448 | } | ||
449 | } | ||
450 | |||
451 | struct ovcamchip_ops ov7x20_ops = { | ||
452 | .init = ov7x20_init, | ||
453 | .free = ov7x20_free, | ||
454 | .command = ov7x20_command, | ||
455 | }; | ||