diff options
Diffstat (limited to 'drivers/media/video/mt9v022.c')
-rw-r--r-- | drivers/media/video/mt9v022.c | 844 |
1 files changed, 844 insertions, 0 deletions
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c new file mode 100644 index 000000000000..d4b9e2744343 --- /dev/null +++ b/drivers/media/video/mt9v022.c | |||
@@ -0,0 +1,844 @@ | |||
1 | /* | ||
2 | * Driver for MT9V022 CMOS Image Sensor from Micron | ||
3 | * | ||
4 | * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> | ||
5 | * | ||
6 | * This program is free software; you can redistribute it and/or modify | ||
7 | * it under the terms of the GNU General Public License version 2 as | ||
8 | * published by the Free Software Foundation. | ||
9 | */ | ||
10 | |||
11 | #include <linux/videodev2.h> | ||
12 | #include <linux/slab.h> | ||
13 | #include <linux/i2c.h> | ||
14 | #include <linux/delay.h> | ||
15 | #include <linux/log2.h> | ||
16 | |||
17 | #include <media/v4l2-common.h> | ||
18 | #include <media/v4l2-chip-ident.h> | ||
19 | #include <media/soc_camera.h> | ||
20 | |||
21 | #ifdef CONFIG_MT9M001_PCA9536_SWITCH | ||
22 | #include <asm/gpio.h> | ||
23 | #endif | ||
24 | |||
25 | /* mt9v022 i2c address 0x48, 0x4c, 0x58, 0x5c | ||
26 | * The platform has to define i2c_board_info | ||
27 | * and call i2c_register_board_info() */ | ||
28 | |||
29 | static char *sensor_type; | ||
30 | module_param(sensor_type, charp, S_IRUGO); | ||
31 | MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\"\n"); | ||
32 | |||
33 | /* mt9v022 selected register addresses */ | ||
34 | #define MT9V022_CHIP_VERSION 0x00 | ||
35 | #define MT9V022_COLUMN_START 0x01 | ||
36 | #define MT9V022_ROW_START 0x02 | ||
37 | #define MT9V022_WINDOW_HEIGHT 0x03 | ||
38 | #define MT9V022_WINDOW_WIDTH 0x04 | ||
39 | #define MT9V022_HORIZONTAL_BLANKING 0x05 | ||
40 | #define MT9V022_VERTICAL_BLANKING 0x06 | ||
41 | #define MT9V022_CHIP_CONTROL 0x07 | ||
42 | #define MT9V022_SHUTTER_WIDTH1 0x08 | ||
43 | #define MT9V022_SHUTTER_WIDTH2 0x09 | ||
44 | #define MT9V022_SHUTTER_WIDTH_CTRL 0x0a | ||
45 | #define MT9V022_TOTAL_SHUTTER_WIDTH 0x0b | ||
46 | #define MT9V022_RESET 0x0c | ||
47 | #define MT9V022_READ_MODE 0x0d | ||
48 | #define MT9V022_MONITOR_MODE 0x0e | ||
49 | #define MT9V022_PIXEL_OPERATION_MODE 0x0f | ||
50 | #define MT9V022_LED_OUT_CONTROL 0x1b | ||
51 | #define MT9V022_ADC_MODE_CONTROL 0x1c | ||
52 | #define MT9V022_ANALOG_GAIN 0x34 | ||
53 | #define MT9V022_BLACK_LEVEL_CALIB_CTRL 0x47 | ||
54 | #define MT9V022_PIXCLK_FV_LV 0x74 | ||
55 | #define MT9V022_DIGITAL_TEST_PATTERN 0x7f | ||
56 | #define MT9V022_AEC_AGC_ENABLE 0xAF | ||
57 | #define MT9V022_MAX_TOTAL_SHUTTER_WIDTH 0xBD | ||
58 | |||
59 | /* Progressive scan, master, defaults */ | ||
60 | #define MT9V022_CHIP_CONTROL_DEFAULT 0x188 | ||
61 | |||
62 | static const struct soc_camera_data_format mt9v022_colour_formats[] = { | ||
63 | /* Order important: first natively supported, | ||
64 | * second supported with a GPIO extender */ | ||
65 | { | ||
66 | .name = "Bayer (sRGB) 10 bit", | ||
67 | .depth = 10, | ||
68 | .fourcc = V4L2_PIX_FMT_SBGGR16, | ||
69 | .colorspace = V4L2_COLORSPACE_SRGB, | ||
70 | }, { | ||
71 | .name = "Bayer (sRGB) 8 bit", | ||
72 | .depth = 8, | ||
73 | .fourcc = V4L2_PIX_FMT_SBGGR8, | ||
74 | .colorspace = V4L2_COLORSPACE_SRGB, | ||
75 | } | ||
76 | }; | ||
77 | |||
78 | static const struct soc_camera_data_format mt9v022_monochrome_formats[] = { | ||
79 | /* Order important - see above */ | ||
80 | { | ||
81 | .name = "Monochrome 10 bit", | ||
82 | .depth = 10, | ||
83 | .fourcc = V4L2_PIX_FMT_Y16, | ||
84 | }, { | ||
85 | .name = "Monochrome 8 bit", | ||
86 | .depth = 8, | ||
87 | .fourcc = V4L2_PIX_FMT_GREY, | ||
88 | }, | ||
89 | }; | ||
90 | |||
91 | struct mt9v022 { | ||
92 | struct i2c_client *client; | ||
93 | struct soc_camera_device icd; | ||
94 | int model; /* V4L2_IDENT_MT9M001* codes from v4l2-chip-ident.h */ | ||
95 | int switch_gpio; | ||
96 | u16 chip_control; | ||
97 | unsigned char datawidth; | ||
98 | }; | ||
99 | |||
100 | static int reg_read(struct soc_camera_device *icd, const u8 reg) | ||
101 | { | ||
102 | struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); | ||
103 | struct i2c_client *client = mt9v022->client; | ||
104 | s32 data = i2c_smbus_read_word_data(client, reg); | ||
105 | return data < 0 ? data : swab16(data); | ||
106 | } | ||
107 | |||
108 | static int reg_write(struct soc_camera_device *icd, const u8 reg, | ||
109 | const u16 data) | ||
110 | { | ||
111 | struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); | ||
112 | return i2c_smbus_write_word_data(mt9v022->client, reg, swab16(data)); | ||
113 | } | ||
114 | |||
115 | static int reg_set(struct soc_camera_device *icd, const u8 reg, | ||
116 | const u16 data) | ||
117 | { | ||
118 | int ret; | ||
119 | |||
120 | ret = reg_read(icd, reg); | ||
121 | if (ret < 0) | ||
122 | return ret; | ||
123 | return reg_write(icd, reg, ret | data); | ||
124 | } | ||
125 | |||
126 | static int reg_clear(struct soc_camera_device *icd, const u8 reg, | ||
127 | const u16 data) | ||
128 | { | ||
129 | int ret; | ||
130 | |||
131 | ret = reg_read(icd, reg); | ||
132 | if (ret < 0) | ||
133 | return ret; | ||
134 | return reg_write(icd, reg, ret & ~data); | ||
135 | } | ||
136 | |||
137 | static int mt9v022_init(struct soc_camera_device *icd) | ||
138 | { | ||
139 | struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); | ||
140 | int ret; | ||
141 | |||
142 | /* Almost the default mode: master, parallel, simultaneous, and an | ||
143 | * undocumented bit 0x200, which is present in table 7, but not in 8, | ||
144 | * plus snapshot mode to disable scan for now */ | ||
145 | mt9v022->chip_control |= 0x10; | ||
146 | ret = reg_write(icd, MT9V022_CHIP_CONTROL, mt9v022->chip_control); | ||
147 | if (ret >= 0) | ||
148 | reg_write(icd, MT9V022_READ_MODE, 0x300); | ||
149 | |||
150 | /* All defaults */ | ||
151 | if (ret >= 0) | ||
152 | /* AEC, AGC on */ | ||
153 | ret = reg_set(icd, MT9V022_AEC_AGC_ENABLE, 0x3); | ||
154 | if (ret >= 0) | ||
155 | ret = reg_write(icd, MT9V022_MAX_TOTAL_SHUTTER_WIDTH, 480); | ||
156 | if (ret >= 0) | ||
157 | /* default - auto */ | ||
158 | ret = reg_clear(icd, MT9V022_BLACK_LEVEL_CALIB_CTRL, 1); | ||
159 | if (ret >= 0) | ||
160 | ret = reg_write(icd, MT9V022_DIGITAL_TEST_PATTERN, 0); | ||
161 | |||
162 | return ret >= 0 ? 0 : -EIO; | ||
163 | } | ||
164 | |||
165 | static int mt9v022_release(struct soc_camera_device *icd) | ||
166 | { | ||
167 | /* Nothing? */ | ||
168 | return 0; | ||
169 | } | ||
170 | |||
171 | static int mt9v022_start_capture(struct soc_camera_device *icd) | ||
172 | { | ||
173 | struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); | ||
174 | /* Switch to master "normal" mode */ | ||
175 | mt9v022->chip_control &= ~0x10; | ||
176 | if (reg_write(icd, MT9V022_CHIP_CONTROL, | ||
177 | mt9v022->chip_control) < 0) | ||
178 | return -EIO; | ||
179 | return 0; | ||
180 | } | ||
181 | |||
182 | static int mt9v022_stop_capture(struct soc_camera_device *icd) | ||
183 | { | ||
184 | struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); | ||
185 | /* Switch to snapshot mode */ | ||
186 | mt9v022->chip_control |= 0x10; | ||
187 | if (reg_write(icd, MT9V022_CHIP_CONTROL, | ||
188 | mt9v022->chip_control) < 0) | ||
189 | return -EIO; | ||
190 | return 0; | ||
191 | } | ||
192 | |||
193 | static int bus_switch_request(struct mt9v022 *mt9v022, struct soc_camera_link *icl) | ||
194 | { | ||
195 | #ifdef CONFIG_MT9V022_PCA9536_SWITCH | ||
196 | int ret; | ||
197 | unsigned int gpio = icl->gpio; | ||
198 | |||
199 | if (gpio_is_valid(gpio)) { | ||
200 | /* We have a data bus switch. */ | ||
201 | ret = gpio_request(gpio, "mt9v022"); | ||
202 | if (ret < 0) { | ||
203 | dev_err(&mt9v022->client->dev, "Cannot get GPIO %u\n", gpio); | ||
204 | return ret; | ||
205 | } | ||
206 | |||
207 | ret = gpio_direction_output(gpio, 0); | ||
208 | if (ret < 0) { | ||
209 | dev_err(&mt9v022->client->dev, | ||
210 | "Cannot set GPIO %u to output\n", gpio); | ||
211 | gpio_free(gpio); | ||
212 | return ret; | ||
213 | } | ||
214 | } | ||
215 | |||
216 | mt9v022->switch_gpio = gpio; | ||
217 | #else | ||
218 | mt9v022->switch_gpio = -EINVAL; | ||
219 | #endif | ||
220 | return 0; | ||
221 | } | ||
222 | |||
223 | static void bus_switch_release(struct mt9v022 *mt9v022) | ||
224 | { | ||
225 | #ifdef CONFIG_MT9V022_PCA9536_SWITCH | ||
226 | if (gpio_is_valid(mt9v022->switch_gpio)) | ||
227 | gpio_free(mt9v022->switch_gpio); | ||
228 | #endif | ||
229 | } | ||
230 | |||
231 | static int bus_switch_act(struct mt9v022 *mt9v022, int go8bit) | ||
232 | { | ||
233 | #ifdef CONFIG_MT9V022_PCA9536_SWITCH | ||
234 | if (!gpio_is_valid(mt9v022->switch_gpio)) | ||
235 | return -ENODEV; | ||
236 | |||
237 | gpio_set_value_cansleep(mt9v022->switch_gpio, go8bit); | ||
238 | return 0; | ||
239 | #else | ||
240 | return -ENODEV; | ||
241 | #endif | ||
242 | } | ||
243 | |||
244 | static int bus_switch_possible(struct mt9v022 *mt9v022) | ||
245 | { | ||
246 | #ifdef CONFIG_MT9V022_PCA9536_SWITCH | ||
247 | return gpio_is_valid(mt9v022->switch_gpio); | ||
248 | #else | ||
249 | return 0; | ||
250 | #endif | ||
251 | } | ||
252 | |||
253 | static int mt9v022_set_bus_param(struct soc_camera_device *icd, | ||
254 | unsigned long flags) | ||
255 | { | ||
256 | struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); | ||
257 | unsigned int width_flag = flags & SOCAM_DATAWIDTH_MASK; | ||
258 | int ret; | ||
259 | u16 pixclk = 0; | ||
260 | |||
261 | /* Only one width bit may be set */ | ||
262 | if (!is_power_of_2(width_flag)) | ||
263 | return -EINVAL; | ||
264 | |||
265 | if ((mt9v022->datawidth != 10 && (width_flag == SOCAM_DATAWIDTH_10)) || | ||
266 | (mt9v022->datawidth != 9 && (width_flag == SOCAM_DATAWIDTH_9)) || | ||
267 | (mt9v022->datawidth != 8 && (width_flag == SOCAM_DATAWIDTH_8))) { | ||
268 | /* Well, we actually only can do 10 or 8 bits... */ | ||
269 | if (width_flag == SOCAM_DATAWIDTH_9) | ||
270 | return -EINVAL; | ||
271 | |||
272 | ret = bus_switch_act(mt9v022, | ||
273 | width_flag == SOCAM_DATAWIDTH_8); | ||
274 | if (ret < 0) | ||
275 | return ret; | ||
276 | |||
277 | mt9v022->datawidth = width_flag == SOCAM_DATAWIDTH_8 ? 8 : 10; | ||
278 | } | ||
279 | |||
280 | if (flags & SOCAM_PCLK_SAMPLE_RISING) | ||
281 | pixclk |= 0x10; | ||
282 | |||
283 | if (!(flags & SOCAM_HSYNC_ACTIVE_HIGH)) | ||
284 | pixclk |= 0x1; | ||
285 | |||
286 | if (!(flags & SOCAM_VSYNC_ACTIVE_HIGH)) | ||
287 | pixclk |= 0x2; | ||
288 | |||
289 | ret = reg_write(icd, MT9V022_PIXCLK_FV_LV, pixclk); | ||
290 | if (ret < 0) | ||
291 | return ret; | ||
292 | |||
293 | if (!(flags & SOCAM_MASTER)) | ||
294 | mt9v022->chip_control &= ~0x8; | ||
295 | |||
296 | ret = reg_write(icd, MT9V022_CHIP_CONTROL, mt9v022->chip_control); | ||
297 | if (ret < 0) | ||
298 | return ret; | ||
299 | |||
300 | dev_dbg(&icd->dev, "Calculated pixclk 0x%x, chip control 0x%x\n", | ||
301 | pixclk, mt9v022->chip_control); | ||
302 | |||
303 | return 0; | ||
304 | } | ||
305 | |||
306 | static unsigned long mt9v022_query_bus_param(struct soc_camera_device *icd) | ||
307 | { | ||
308 | struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); | ||
309 | unsigned int width_flag = SOCAM_DATAWIDTH_10; | ||
310 | |||
311 | if (bus_switch_possible(mt9v022)) | ||
312 | width_flag |= SOCAM_DATAWIDTH_8; | ||
313 | |||
314 | return SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING | | ||
315 | SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW | | ||
316 | SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW | | ||
317 | SOCAM_MASTER | SOCAM_SLAVE | | ||
318 | width_flag; | ||
319 | } | ||
320 | |||
321 | static int mt9v022_set_fmt_cap(struct soc_camera_device *icd, | ||
322 | __u32 pixfmt, struct v4l2_rect *rect) | ||
323 | { | ||
324 | struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); | ||
325 | int ret; | ||
326 | |||
327 | /* The caller provides a supported format, as verified per call to | ||
328 | * icd->try_fmt_cap(), datawidth is from our supported format list */ | ||
329 | switch (pixfmt) { | ||
330 | case V4L2_PIX_FMT_GREY: | ||
331 | case V4L2_PIX_FMT_Y16: | ||
332 | if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATM) | ||
333 | return -EINVAL; | ||
334 | break; | ||
335 | case V4L2_PIX_FMT_SBGGR8: | ||
336 | case V4L2_PIX_FMT_SBGGR16: | ||
337 | if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATC) | ||
338 | return -EINVAL; | ||
339 | break; | ||
340 | case 0: | ||
341 | /* No format change, only geometry */ | ||
342 | break; | ||
343 | default: | ||
344 | return -EINVAL; | ||
345 | } | ||
346 | |||
347 | /* Like in example app. Contradicts the datasheet though */ | ||
348 | ret = reg_read(icd, MT9V022_AEC_AGC_ENABLE); | ||
349 | if (ret >= 0) { | ||
350 | if (ret & 1) /* Autoexposure */ | ||
351 | ret = reg_write(icd, MT9V022_MAX_TOTAL_SHUTTER_WIDTH, | ||
352 | rect->height + icd->y_skip_top + 43); | ||
353 | else | ||
354 | ret = reg_write(icd, MT9V022_TOTAL_SHUTTER_WIDTH, | ||
355 | rect->height + icd->y_skip_top + 43); | ||
356 | } | ||
357 | /* Setup frame format: defaults apart from width and height */ | ||
358 | if (ret >= 0) | ||
359 | ret = reg_write(icd, MT9V022_COLUMN_START, rect->left); | ||
360 | if (ret >= 0) | ||
361 | ret = reg_write(icd, MT9V022_ROW_START, rect->top); | ||
362 | if (ret >= 0) | ||
363 | /* Default 94, Phytec driver says: | ||
364 | * "width + horizontal blank >= 660" */ | ||
365 | ret = reg_write(icd, MT9V022_HORIZONTAL_BLANKING, | ||
366 | rect->width > 660 - 43 ? 43 : | ||
367 | 660 - rect->width); | ||
368 | if (ret >= 0) | ||
369 | ret = reg_write(icd, MT9V022_VERTICAL_BLANKING, 45); | ||
370 | if (ret >= 0) | ||
371 | ret = reg_write(icd, MT9V022_WINDOW_WIDTH, rect->width); | ||
372 | if (ret >= 0) | ||
373 | ret = reg_write(icd, MT9V022_WINDOW_HEIGHT, | ||
374 | rect->height + icd->y_skip_top); | ||
375 | |||
376 | if (ret < 0) | ||
377 | return ret; | ||
378 | |||
379 | dev_dbg(&icd->dev, "Frame %ux%u pixel\n", rect->width, rect->height); | ||
380 | |||
381 | return 0; | ||
382 | } | ||
383 | |||
384 | static int mt9v022_try_fmt_cap(struct soc_camera_device *icd, | ||
385 | struct v4l2_format *f) | ||
386 | { | ||
387 | if (f->fmt.pix.height < 32 + icd->y_skip_top) | ||
388 | f->fmt.pix.height = 32 + icd->y_skip_top; | ||
389 | if (f->fmt.pix.height > 480 + icd->y_skip_top) | ||
390 | f->fmt.pix.height = 480 + icd->y_skip_top; | ||
391 | if (f->fmt.pix.width < 48) | ||
392 | f->fmt.pix.width = 48; | ||
393 | if (f->fmt.pix.width > 752) | ||
394 | f->fmt.pix.width = 752; | ||
395 | f->fmt.pix.width &= ~0x03; /* ? */ | ||
396 | |||
397 | return 0; | ||
398 | } | ||
399 | |||
400 | static int mt9v022_get_chip_id(struct soc_camera_device *icd, | ||
401 | struct v4l2_chip_ident *id) | ||
402 | { | ||
403 | struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); | ||
404 | |||
405 | if (id->match_type != V4L2_CHIP_MATCH_I2C_ADDR) | ||
406 | return -EINVAL; | ||
407 | |||
408 | if (id->match_chip != mt9v022->client->addr) | ||
409 | return -ENODEV; | ||
410 | |||
411 | id->ident = mt9v022->model; | ||
412 | id->revision = 0; | ||
413 | |||
414 | return 0; | ||
415 | } | ||
416 | |||
417 | #ifdef CONFIG_VIDEO_ADV_DEBUG | ||
418 | static int mt9v022_get_register(struct soc_camera_device *icd, | ||
419 | struct v4l2_register *reg) | ||
420 | { | ||
421 | struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); | ||
422 | |||
423 | if (reg->match_type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) | ||
424 | return -EINVAL; | ||
425 | |||
426 | if (reg->match_chip != mt9v022->client->addr) | ||
427 | return -ENODEV; | ||
428 | |||
429 | reg->val = reg_read(icd, reg->reg); | ||
430 | |||
431 | if (reg->val > 0xffff) | ||
432 | return -EIO; | ||
433 | |||
434 | return 0; | ||
435 | } | ||
436 | |||
437 | static int mt9v022_set_register(struct soc_camera_device *icd, | ||
438 | struct v4l2_register *reg) | ||
439 | { | ||
440 | struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); | ||
441 | |||
442 | if (reg->match_type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) | ||
443 | return -EINVAL; | ||
444 | |||
445 | if (reg->match_chip != mt9v022->client->addr) | ||
446 | return -ENODEV; | ||
447 | |||
448 | if (reg_write(icd, reg->reg, reg->val) < 0) | ||
449 | return -EIO; | ||
450 | |||
451 | return 0; | ||
452 | } | ||
453 | #endif | ||
454 | |||
455 | const struct v4l2_queryctrl mt9v022_controls[] = { | ||
456 | { | ||
457 | .id = V4L2_CID_VFLIP, | ||
458 | .type = V4L2_CTRL_TYPE_BOOLEAN, | ||
459 | .name = "Flip Vertically", | ||
460 | .minimum = 0, | ||
461 | .maximum = 1, | ||
462 | .step = 1, | ||
463 | .default_value = 0, | ||
464 | }, { | ||
465 | .id = V4L2_CID_HFLIP, | ||
466 | .type = V4L2_CTRL_TYPE_BOOLEAN, | ||
467 | .name = "Flip Horizontally", | ||
468 | .minimum = 0, | ||
469 | .maximum = 1, | ||
470 | .step = 1, | ||
471 | .default_value = 0, | ||
472 | }, { | ||
473 | .id = V4L2_CID_GAIN, | ||
474 | .type = V4L2_CTRL_TYPE_INTEGER, | ||
475 | .name = "Analog Gain", | ||
476 | .minimum = 64, | ||
477 | .maximum = 127, | ||
478 | .step = 1, | ||
479 | .default_value = 64, | ||
480 | .flags = V4L2_CTRL_FLAG_SLIDER, | ||
481 | }, { | ||
482 | .id = V4L2_CID_EXPOSURE, | ||
483 | .type = V4L2_CTRL_TYPE_INTEGER, | ||
484 | .name = "Exposure", | ||
485 | .minimum = 1, | ||
486 | .maximum = 255, | ||
487 | .step = 1, | ||
488 | .default_value = 255, | ||
489 | .flags = V4L2_CTRL_FLAG_SLIDER, | ||
490 | }, { | ||
491 | .id = V4L2_CID_AUTOGAIN, | ||
492 | .type = V4L2_CTRL_TYPE_BOOLEAN, | ||
493 | .name = "Automatic Gain", | ||
494 | .minimum = 0, | ||
495 | .maximum = 1, | ||
496 | .step = 1, | ||
497 | .default_value = 1, | ||
498 | }, { | ||
499 | .id = V4L2_CID_EXPOSURE_AUTO, | ||
500 | .type = V4L2_CTRL_TYPE_BOOLEAN, | ||
501 | .name = "Automatic Exposure", | ||
502 | .minimum = 0, | ||
503 | .maximum = 1, | ||
504 | .step = 1, | ||
505 | .default_value = 1, | ||
506 | } | ||
507 | }; | ||
508 | |||
509 | static int mt9v022_video_probe(struct soc_camera_device *); | ||
510 | static void mt9v022_video_remove(struct soc_camera_device *); | ||
511 | static int mt9v022_get_control(struct soc_camera_device *, struct v4l2_control *); | ||
512 | static int mt9v022_set_control(struct soc_camera_device *, struct v4l2_control *); | ||
513 | |||
514 | static struct soc_camera_ops mt9v022_ops = { | ||
515 | .owner = THIS_MODULE, | ||
516 | .probe = mt9v022_video_probe, | ||
517 | .remove = mt9v022_video_remove, | ||
518 | .init = mt9v022_init, | ||
519 | .release = mt9v022_release, | ||
520 | .start_capture = mt9v022_start_capture, | ||
521 | .stop_capture = mt9v022_stop_capture, | ||
522 | .set_fmt_cap = mt9v022_set_fmt_cap, | ||
523 | .try_fmt_cap = mt9v022_try_fmt_cap, | ||
524 | .set_bus_param = mt9v022_set_bus_param, | ||
525 | .query_bus_param = mt9v022_query_bus_param, | ||
526 | .controls = mt9v022_controls, | ||
527 | .num_controls = ARRAY_SIZE(mt9v022_controls), | ||
528 | .get_control = mt9v022_get_control, | ||
529 | .set_control = mt9v022_set_control, | ||
530 | .get_chip_id = mt9v022_get_chip_id, | ||
531 | #ifdef CONFIG_VIDEO_ADV_DEBUG | ||
532 | .get_register = mt9v022_get_register, | ||
533 | .set_register = mt9v022_set_register, | ||
534 | #endif | ||
535 | }; | ||
536 | |||
537 | static int mt9v022_get_control(struct soc_camera_device *icd, | ||
538 | struct v4l2_control *ctrl) | ||
539 | { | ||
540 | int data; | ||
541 | |||
542 | switch (ctrl->id) { | ||
543 | case V4L2_CID_VFLIP: | ||
544 | data = reg_read(icd, MT9V022_READ_MODE); | ||
545 | if (data < 0) | ||
546 | return -EIO; | ||
547 | ctrl->value = !!(data & 0x10); | ||
548 | break; | ||
549 | case V4L2_CID_HFLIP: | ||
550 | data = reg_read(icd, MT9V022_READ_MODE); | ||
551 | if (data < 0) | ||
552 | return -EIO; | ||
553 | ctrl->value = !!(data & 0x20); | ||
554 | break; | ||
555 | case V4L2_CID_EXPOSURE_AUTO: | ||
556 | data = reg_read(icd, MT9V022_AEC_AGC_ENABLE); | ||
557 | if (data < 0) | ||
558 | return -EIO; | ||
559 | ctrl->value = !!(data & 0x1); | ||
560 | break; | ||
561 | case V4L2_CID_AUTOGAIN: | ||
562 | data = reg_read(icd, MT9V022_AEC_AGC_ENABLE); | ||
563 | if (data < 0) | ||
564 | return -EIO; | ||
565 | ctrl->value = !!(data & 0x2); | ||
566 | break; | ||
567 | } | ||
568 | return 0; | ||
569 | } | ||
570 | |||
571 | static int mt9v022_set_control(struct soc_camera_device *icd, | ||
572 | struct v4l2_control *ctrl) | ||
573 | { | ||
574 | int data; | ||
575 | const struct v4l2_queryctrl *qctrl; | ||
576 | |||
577 | qctrl = soc_camera_find_qctrl(&mt9v022_ops, ctrl->id); | ||
578 | |||
579 | if (!qctrl) | ||
580 | return -EINVAL; | ||
581 | |||
582 | switch (ctrl->id) { | ||
583 | case V4L2_CID_VFLIP: | ||
584 | if (ctrl->value) | ||
585 | data = reg_set(icd, MT9V022_READ_MODE, 0x10); | ||
586 | else | ||
587 | data = reg_clear(icd, MT9V022_READ_MODE, 0x10); | ||
588 | if (data < 0) | ||
589 | return -EIO; | ||
590 | break; | ||
591 | case V4L2_CID_HFLIP: | ||
592 | if (ctrl->value) | ||
593 | data = reg_set(icd, MT9V022_READ_MODE, 0x20); | ||
594 | else | ||
595 | data = reg_clear(icd, MT9V022_READ_MODE, 0x20); | ||
596 | if (data < 0) | ||
597 | return -EIO; | ||
598 | break; | ||
599 | case V4L2_CID_GAIN: | ||
600 | /* mt9v022 has minimum == default */ | ||
601 | if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum) | ||
602 | return -EINVAL; | ||
603 | else { | ||
604 | unsigned long range = qctrl->maximum - qctrl->minimum; | ||
605 | /* Datasheet says 16 to 64. autogain only works properly | ||
606 | * after setting gain to maximum 14. Larger values | ||
607 | * produce "white fly" noise effect. On the whole, | ||
608 | * manually setting analog gain does no good. */ | ||
609 | unsigned long gain = ((ctrl->value - qctrl->minimum) * | ||
610 | 10 + range / 2) / range + 4; | ||
611 | if (gain >= 32) | ||
612 | gain &= ~1; | ||
613 | /* The user wants to set gain manually, hope, she | ||
614 | * knows, what she's doing... Switch AGC off. */ | ||
615 | |||
616 | if (reg_clear(icd, MT9V022_AEC_AGC_ENABLE, 0x2) < 0) | ||
617 | return -EIO; | ||
618 | |||
619 | dev_info(&icd->dev, "Setting gain from %d to %lu\n", | ||
620 | reg_read(icd, MT9V022_ANALOG_GAIN), gain); | ||
621 | if (reg_write(icd, MT9V022_ANALOG_GAIN, gain) < 0) | ||
622 | return -EIO; | ||
623 | icd->gain = ctrl->value; | ||
624 | } | ||
625 | break; | ||
626 | case V4L2_CID_EXPOSURE: | ||
627 | /* mt9v022 has maximum == default */ | ||
628 | if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum) | ||
629 | return -EINVAL; | ||
630 | else { | ||
631 | unsigned long range = qctrl->maximum - qctrl->minimum; | ||
632 | unsigned long shutter = ((ctrl->value - qctrl->minimum) * | ||
633 | 479 + range / 2) / range + 1; | ||
634 | /* The user wants to set shutter width manually, hope, | ||
635 | * she knows, what she's doing... Switch AEC off. */ | ||
636 | |||
637 | if (reg_clear(icd, MT9V022_AEC_AGC_ENABLE, 0x1) < 0) | ||
638 | return -EIO; | ||
639 | |||
640 | dev_dbg(&icd->dev, "Shutter width from %d to %lu\n", | ||
641 | reg_read(icd, MT9V022_TOTAL_SHUTTER_WIDTH), | ||
642 | shutter); | ||
643 | if (reg_write(icd, MT9V022_TOTAL_SHUTTER_WIDTH, | ||
644 | shutter) < 0) | ||
645 | return -EIO; | ||
646 | icd->exposure = ctrl->value; | ||
647 | } | ||
648 | break; | ||
649 | case V4L2_CID_AUTOGAIN: | ||
650 | if (ctrl->value) | ||
651 | data = reg_set(icd, MT9V022_AEC_AGC_ENABLE, 0x2); | ||
652 | else | ||
653 | data = reg_clear(icd, MT9V022_AEC_AGC_ENABLE, 0x2); | ||
654 | if (data < 0) | ||
655 | return -EIO; | ||
656 | break; | ||
657 | case V4L2_CID_EXPOSURE_AUTO: | ||
658 | if (ctrl->value) | ||
659 | data = reg_set(icd, MT9V022_AEC_AGC_ENABLE, 0x1); | ||
660 | else | ||
661 | data = reg_clear(icd, MT9V022_AEC_AGC_ENABLE, 0x1); | ||
662 | if (data < 0) | ||
663 | return -EIO; | ||
664 | break; | ||
665 | } | ||
666 | return 0; | ||
667 | } | ||
668 | |||
669 | /* Interface active, can use i2c. If it fails, it can indeed mean, that | ||
670 | * this wasn't our capture interface, so, we wait for the right one */ | ||
671 | static int mt9v022_video_probe(struct soc_camera_device *icd) | ||
672 | { | ||
673 | struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); | ||
674 | s32 data; | ||
675 | int ret; | ||
676 | |||
677 | if (!icd->dev.parent || | ||
678 | to_soc_camera_host(icd->dev.parent)->nr != icd->iface) | ||
679 | return -ENODEV; | ||
680 | |||
681 | /* Read out the chip version register */ | ||
682 | data = reg_read(icd, MT9V022_CHIP_VERSION); | ||
683 | |||
684 | /* must be 0x1311 or 0x1313 */ | ||
685 | if (data != 0x1311 && data != 0x1313) { | ||
686 | ret = -ENODEV; | ||
687 | dev_info(&icd->dev, "No MT9V022 detected, ID register 0x%x\n", | ||
688 | data); | ||
689 | goto ei2c; | ||
690 | } | ||
691 | |||
692 | /* Soft reset */ | ||
693 | ret = reg_write(icd, MT9V022_RESET, 1); | ||
694 | if (ret < 0) | ||
695 | goto ei2c; | ||
696 | /* 15 clock cycles */ | ||
697 | udelay(200); | ||
698 | if (reg_read(icd, MT9V022_RESET)) { | ||
699 | dev_err(&icd->dev, "Resetting MT9V022 failed!\n"); | ||
700 | goto ei2c; | ||
701 | } | ||
702 | |||
703 | /* Set monochrome or colour sensor type */ | ||
704 | if (sensor_type && (!strcmp("colour", sensor_type) || | ||
705 | !strcmp("color", sensor_type))) { | ||
706 | ret = reg_write(icd, MT9V022_PIXEL_OPERATION_MODE, 4 | 0x11); | ||
707 | mt9v022->model = V4L2_IDENT_MT9V022IX7ATC; | ||
708 | icd->formats = mt9v022_colour_formats; | ||
709 | if (mt9v022->client->dev.platform_data) | ||
710 | icd->num_formats = ARRAY_SIZE(mt9v022_colour_formats); | ||
711 | else | ||
712 | icd->num_formats = 1; | ||
713 | } else { | ||
714 | ret = reg_write(icd, MT9V022_PIXEL_OPERATION_MODE, 0x11); | ||
715 | mt9v022->model = V4L2_IDENT_MT9V022IX7ATM; | ||
716 | icd->formats = mt9v022_monochrome_formats; | ||
717 | if (mt9v022->client->dev.platform_data) | ||
718 | icd->num_formats = ARRAY_SIZE(mt9v022_monochrome_formats); | ||
719 | else | ||
720 | icd->num_formats = 1; | ||
721 | } | ||
722 | |||
723 | if (ret >= 0) | ||
724 | ret = soc_camera_video_start(icd); | ||
725 | if (ret < 0) | ||
726 | goto eisis; | ||
727 | |||
728 | dev_info(&icd->dev, "Detected a MT9V022 chip ID %x, %s sensor\n", | ||
729 | data, mt9v022->model == V4L2_IDENT_MT9V022IX7ATM ? | ||
730 | "monochrome" : "colour"); | ||
731 | |||
732 | return 0; | ||
733 | |||
734 | eisis: | ||
735 | ei2c: | ||
736 | return ret; | ||
737 | } | ||
738 | |||
739 | static void mt9v022_video_remove(struct soc_camera_device *icd) | ||
740 | { | ||
741 | struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); | ||
742 | |||
743 | dev_dbg(&icd->dev, "Video %x removed: %p, %p\n", mt9v022->client->addr, | ||
744 | mt9v022->icd.dev.parent, mt9v022->icd.vdev); | ||
745 | soc_camera_video_stop(&mt9v022->icd); | ||
746 | } | ||
747 | |||
748 | static int mt9v022_probe(struct i2c_client *client) | ||
749 | { | ||
750 | struct mt9v022 *mt9v022; | ||
751 | struct soc_camera_device *icd; | ||
752 | struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); | ||
753 | struct soc_camera_link *icl = client->dev.platform_data; | ||
754 | int ret; | ||
755 | |||
756 | if (!icl) { | ||
757 | dev_err(&client->dev, "MT9V022 driver needs platform data\n"); | ||
758 | return -EINVAL; | ||
759 | } | ||
760 | |||
761 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { | ||
762 | dev_warn(&adapter->dev, | ||
763 | "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); | ||
764 | return -EIO; | ||
765 | } | ||
766 | |||
767 | mt9v022 = kzalloc(sizeof(struct mt9v022), GFP_KERNEL); | ||
768 | if (!mt9v022) | ||
769 | return -ENOMEM; | ||
770 | |||
771 | mt9v022->chip_control = MT9V022_CHIP_CONTROL_DEFAULT; | ||
772 | mt9v022->client = client; | ||
773 | i2c_set_clientdata(client, mt9v022); | ||
774 | |||
775 | icd = &mt9v022->icd; | ||
776 | icd->ops = &mt9v022_ops; | ||
777 | icd->control = &client->dev; | ||
778 | icd->x_min = 1; | ||
779 | icd->y_min = 4; | ||
780 | icd->x_current = 1; | ||
781 | icd->y_current = 4; | ||
782 | icd->width_min = 48; | ||
783 | icd->width_max = 752; | ||
784 | icd->height_min = 32; | ||
785 | icd->height_max = 480; | ||
786 | icd->y_skip_top = 1; | ||
787 | icd->iface = icl->bus_id; | ||
788 | /* Default datawidth - this is the only width this camera (normally) | ||
789 | * supports. It is only with extra logic that it can support | ||
790 | * other widths. Therefore it seems to be a sensible default. */ | ||
791 | mt9v022->datawidth = 10; | ||
792 | |||
793 | ret = bus_switch_request(mt9v022, icl); | ||
794 | if (ret) | ||
795 | goto eswinit; | ||
796 | |||
797 | ret = soc_camera_device_register(icd); | ||
798 | if (ret) | ||
799 | goto eisdr; | ||
800 | |||
801 | return 0; | ||
802 | |||
803 | eisdr: | ||
804 | bus_switch_release(mt9v022); | ||
805 | eswinit: | ||
806 | kfree(mt9v022); | ||
807 | return ret; | ||
808 | } | ||
809 | |||
810 | static int mt9v022_remove(struct i2c_client *client) | ||
811 | { | ||
812 | struct mt9v022 *mt9v022 = i2c_get_clientdata(client); | ||
813 | |||
814 | soc_camera_device_unregister(&mt9v022->icd); | ||
815 | bus_switch_release(mt9v022); | ||
816 | kfree(mt9v022); | ||
817 | |||
818 | return 0; | ||
819 | } | ||
820 | |||
821 | static struct i2c_driver mt9v022_i2c_driver = { | ||
822 | .driver = { | ||
823 | .name = "mt9v022", | ||
824 | }, | ||
825 | .probe = mt9v022_probe, | ||
826 | .remove = mt9v022_remove, | ||
827 | }; | ||
828 | |||
829 | static int __init mt9v022_mod_init(void) | ||
830 | { | ||
831 | return i2c_add_driver(&mt9v022_i2c_driver); | ||
832 | } | ||
833 | |||
834 | static void __exit mt9v022_mod_exit(void) | ||
835 | { | ||
836 | i2c_del_driver(&mt9v022_i2c_driver); | ||
837 | } | ||
838 | |||
839 | module_init(mt9v022_mod_init); | ||
840 | module_exit(mt9v022_mod_exit); | ||
841 | |||
842 | MODULE_DESCRIPTION("Micron MT9V022 Camera driver"); | ||
843 | MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>"); | ||
844 | MODULE_LICENSE("GPL"); | ||