3 files changed, 13 insertions, 0 deletions

diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index a5cc1c1fc2d6..39465301ec94 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -3003,6 +3003,14 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl)
         case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
                 ctl->demod = XC3028_FE_OREN538;
                 break;
+        case CX88_BOARD_GENIATECH_X8000_MT:
+                /* FIXME: For this board, the xc3028 never recovers after being
+                   powered down (the reset GPIO probably is not set properly).
+                   We don't have access to the hardware so we cannot determine
+                   which GPIO is used for xc3028, so just disable power xc3028
+                   power management for now */
+                ctl->disable_power_mgmt = 1;
+                break;
         case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
         case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
         case CX88_BOARD_PROLINK_PV_8000GT:
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index c44e87600219..e237b507659b 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -501,6 +501,7 @@ static struct zl10353_config cx88_pinnacle_hybrid_pctv = {
 static struct zl10353_config cx88_geniatech_x8000_mt = {
        .demod_address = (0x1e >> 1),
        .no_tuner = 1,
+       .disable_i2c_gate_ctrl = 1,
 };
 
 static struct s5h1411_config dvico_fusionhdtv7_config = {
diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c
index da4e3912cd37..7172dcf2a4fa 100644
--- a/drivers/media/video/cx88/cx88-mpeg.c
+++ b/drivers/media/video/cx88/cx88-mpeg.c
@@ -116,6 +116,10 @@ static int cx8802_start_dma(struct cx8802_dev    *dev,
                         udelay(100);
                         break;
                 case CX88_BOARD_HAUPPAUGE_HVR1300:
+                        /* Enable MPEG parallel IO and video signal pins */
+                        cx_write(MO_PINMUX_IO, 0x88);
+                        cx_write(TS_SOP_STAT, 0);
+                        cx_write(TS_VALERR_CNTRL, 0);
                         break;
                 case CX88_BOARD_PINNACLE_PCTV_HD_800i:
                         /* Enable MPEG parallel IO and video signal pins */