3 files changed, 22 insertions, 22 deletions

diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig
index 35a55998a8d3..5f942690570c 100644
--- a/drivers/media/video/cx18/Kconfig
+++ b/drivers/media/video/cx18/Kconfig
@@ -11,6 +11,7 @@ config VIDEO_CX18
         select VIDEO_CX2341X
         select VIDEO_CS5345
         select DVB_S5H1409
+        select MEDIA_TUNER_MXL5005S
         ---help---
           This is a video4linux driver for Conexant cx23418 based
           PCI combo video recorder devices.
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index f5e3ba1f5354..bf6f7edca887 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -51,7 +51,8 @@ static const struct cx18_card cx18_card_hvr1600_esmt = {
         .v4l2_capabilities = CX18_CAP_ENCODER,
         .hw_audio_ctrl = CX18_HW_CX23418,
         .hw_muxer = CX18_HW_CS5345,
-        .hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER | CX18_HW_CS5345,
+        .hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER | CX18_HW_CS5345
+                | CX18_HW_DVB,
         .video_inputs = {
                 { CX18_CARD_INPUT_VID_TUNER,  0, CX23418_COMPOSITE7 },
                 { CX18_CARD_INPUT_SVIDEO1,    1, CX23418_SVIDEO1    },
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index 65efe69d939a..c9744173f969 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -24,25 +24,27 @@
 #include "cx18-streams.h"
 #include "cx18-cards.h"
 #include "s5h1409.h"
-
-/* Wait until the MXL500X driver is merged */
-#ifdef HAVE_MXL500X
-#include "mxl500x.h"
-#endif
+#include "mxl5005s.h"
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 #define CX18_REG_DMUX_NUM_PORT_0_CONTROL 0xd5a000
 
-#ifdef HAVE_MXL500X
-static struct mxl500x_config hauppauge_hvr1600_tuner = {
-        .delsys    = MXL500x_MODE_ATSC,
-        .octf      = MXL500x_OCTF_CH,
-        .xtal_freq = 16000000,
-        .iflo_freq = 5380000,
-        .ref_freq  = 322800000,
-        .rssi_ena  = MXL_RSSI_ENABLE,
-        .addr      = 0xC6 >> 1,
+static struct mxl5005s_config hauppauge_hvr1600_tuner = {
+        .i2c_address     = 0xC6 >> 1,
+        .if_freq         = IF_FREQ_5380000HZ,
+        .xtal_freq       = CRYSTAL_FREQ_16000000HZ,
+        .agc_mode        = MXL_SINGLE_AGC,
+        .tracking_filter = MXL_TF_C_H,
+        .rssi_enable     = MXL_RSSI_ENABLE,
+        .cap_select      = MXL_CAP_SEL_ENABLE,
+        .div_out         = MXL_DIV_OUT_4,
+        .clock_out       = MXL_CLOCK_OUT_DISABLE,
+        .output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+        .top             = MXL5005S_TOP_25P2,
+        .mod_mode        = MXL_DIGITAL_MODE,
+        .if_mode         = MXL_ZERO_IF,
+        .AgcMasterByte   = 0x00,
 };
 
 static struct s5h1409_config hauppauge_hvr1600_config = {
@@ -55,7 +57,6 @@ static struct s5h1409_config hauppauge_hvr1600_config = {
         .mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
 
 };
-#endif
 
 static int dvb_register(struct cx18_stream *stream);
 
@@ -252,21 +253,18 @@ static int dvb_register(struct cx18_stream *stream)
         int ret = 0;
 
         switch (cx->card->type) {
-/* Wait until the MXL500X driver is merged */
-#ifdef HAVE_MXL500X
         case CX18_CARD_HVR_1600_ESMT:
         case CX18_CARD_HVR_1600_SAMSUNG:
                 dvb->fe = dvb_attach(s5h1409_attach,
                         &hauppauge_hvr1600_config,
                         &cx->i2c_adap[0]);
                 if (dvb->fe != NULL) {
-                        dvb_attach(mxl500x_attach, dvb->fe,
-                                &hauppauge_hvr1600_tuner,
-                                &cx->i2c_adap[0]);
+                        dvb_attach(mxl5005s_attach, dvb->fe,
+                                &cx->i2c_adap[0],
+                                &hauppauge_hvr1600_tuner);
                         ret = 0;
                 }
                 break;
-#endif
         default:
                 /* No Digital Tv Support */
                 break;