1 files changed, 118 insertions, 98 deletions

diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
index 7891f3f06f04..6e0f5d307c52 100644
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -59,8 +59,12 @@ struct budget_av {
         struct dvb_ca_en50221 ca;
 };
 
-static int enable_ci = 0;
-
+/* GPIO CI Connections:
+ * 0 - Vcc/Reset (Reset is controlled by capacitor)
+ * 1 - Attribute Memory
+ * 2 - Card Enable (Active Low)
+ * 3 - Card Detect
+ */
 
 /****************************************************************************
  * INITIALIZATION
@@ -188,22 +192,35 @@ static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
 {
         struct budget_av *budget_av = (struct budget_av *) ca->data;
         struct saa7146_dev *saa = budget_av->budget.dev;
-        int max = 20;
+        int timeout = 50; // 5 seconds (4.4.6 Ready)
 
         if (slot != 0)
                 return -EINVAL;
 
         dprintk(1, "ciintf_slot_reset\n");
 
-        /* reset the card */
-        saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
-        msleep(100);
-        saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+        saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
 
-        while (--max > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d)
+        saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
+        msleep(2);
+        saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); /* Vcc on */
+        msleep(20); /* 20 ms Vcc settling time */
+
+        saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */
+
+        /* This should have been based on pin 16 READY of the pcmcia port,
+         * but AFAICS it is not routed to the saa7146 */
+        while (--timeout > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d)
                 msleep(100);
 
-        ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
+        if (timeout <= 0)
+        {
+                printk(KERN_ERR "budget-av: cam reset failed (timeout).\n");
+                saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
+                saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
+                return -ETIMEDOUT;
+        }
+
         return 0;
 }
 
@@ -240,7 +257,6 @@ static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open
 {
         struct budget_av *budget_av = (struct budget_av *) ca->data;
         struct saa7146_dev *saa = budget_av->budget.dev;
-        int cam = 0;
 
         if (slot != 0)
                 return -EINVAL;
@@ -248,15 +264,21 @@ static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open
         if (!budget_av->slot_status) {
                 saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
                 udelay(1);
-                cam = saa7146_read(saa, PSR) & MASK_06;
-                saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
-
-                if (cam)
+                if (saa7146_read(saa, PSR) & MASK_06)
+                {
+                        printk(KERN_INFO "budget-av: cam inserted\n");
                         budget_av->slot_status = 1;
+                }
+                saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
         } else if (!open) {
                 saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
                 if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) == -ETIMEDOUT)
+                {
+                        printk(KERN_INFO "budget-av: cam ejected\n");
+                        saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
+                        saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
                         budget_av->slot_status = 0;
+                }
         }
 
         if (budget_av->slot_status == 1)
@@ -272,17 +294,11 @@ static int ciintf_init(struct budget_av *budget_av)
 
         memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221));
 
-        /* setup GPIOs */
-        saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI);
+        saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+        saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO);
         saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO);
         saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
 
-        /* Reset the card */
-        saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
-        msleep(50);
-        saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
-        msleep(100);
-
         /* Enable DEBI pins */
         saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
 
@@ -297,13 +313,14 @@ static int ciintf_init(struct budget_av *budget_av)
         budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable;
         budget_av->ca.poll_slot_status = ciintf_poll_slot_status;
         budget_av->ca.data = budget_av;
+
         if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter,
                                           &budget_av->ca, 0, 1)) != 0) {
-                printk("budget_av: CI interface detected, but initialisation failed.\n");
+                printk(KERN_ERR "budget-av: ci initialisation failed.\n");
                 goto error;
         }
-        // success!
-        printk("ciintf_init: CI interface initialised\n");
+
+        printk(KERN_INFO "budget-av: ci interface initialised.\n");
         budget_av->budget.ci_present = 1;
         return 0;
 
@@ -361,8 +378,12 @@ static const u8 saa7113_tab[] = {
 static int saa7113_init(struct budget_av *budget_av)
 {
         struct budget *budget = &budget_av->budget;
+        struct saa7146_dev *saa = budget->dev;
         const u8 *data = saa7113_tab;
 
+        saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
+        msleep(200);
+
         if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) {
                 dprintk(1, "saa7113 not found on KNC card\n");
                 return -ENODEV;
@@ -697,82 +718,90 @@ static u8 read_pwm(struct budget_av *budget_av)
         return pwm;
 }
 
+#define SUBID_DVBS_KNC1         0x0010
+#define SUBID_DVBS_KNC1_PLUS    0x0011
+#define SUBID_DVBS_TYPHOON      0x4f56
+#define SUBID_DVBS_CINERGY1200  0x1154
+
+#define SUBID_DVBC_KNC1         0x0020
+#define SUBID_DVBC_KNC1_PLUS    0x0021
+#define SUBID_DVBC_CINERGY1200  0x1156
+
+#define SUBID_DVBT_KNC1_PLUS    0x0031
+#define SUBID_DVBT_KNC1         0x0030
+#define SUBID_DVBT_CINERGY1200  0x1157
 
 static void frontend_init(struct budget_av *budget_av)
 {
-        switch (budget_av->budget.dev->pci->subsystem_device) {
-        case 0x0011:            // KNC1 DVB-S Plus budget with AV IN (stv0299/Philips SU1278(tsa5059))
-                saa7146_write(budget_av->budget.dev, GPIO_CTRL, 0x50000000); // Enable / PowerON Frontend
-        case 0x4f56:            // Typhoon/KNC1 DVB-S budget (stv0299/Philips SU1278(tsa5059))
-        case 0x0010:            // KNC1 DVB-S budget (stv0299/Philips SU1278(tsa5059))
-                budget_av->budget.dvb_frontend =
-                        stv0299_attach(&typhoon_config, &budget_av->budget.i2c_adap);
-                if (budget_av->budget.dvb_frontend != NULL) {
+        struct saa7146_dev * saa = budget_av->budget.dev;
+        struct dvb_frontend * fe = NULL;
+
+        switch (saa->pci->subsystem_device) {
+                case SUBID_DVBS_KNC1_PLUS:
+                case SUBID_DVBC_KNC1_PLUS:
+                case SUBID_DVBT_KNC1_PLUS:
+                        // Enable / PowerON Frontend
+                        saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
                         break;
-                }
+        }
+
+        switch (saa->pci->subsystem_device) {
+
+        case SUBID_DVBS_KNC1:
+        case SUBID_DVBS_KNC1_PLUS:
+        case SUBID_DVBS_TYPHOON:
+                fe = stv0299_attach(&typhoon_config,
+                                    &budget_av->budget.i2c_adap);
                 break;
 
-        case 0x0021:            // KNC1 DVB-C Plus budget with AV IN (tda10021/Philips CU1216(tua6034))
-                saa7146_write(budget_av->budget.dev, GPIO_CTRL, 0x50000000); // Enable / PowerON Frontend
-        case 0x0020:            // KNC1 DVB-C budget (tda10021/Philips CU1216(tua6034))
-                budget_av->budget.dvb_frontend =
-                        tda10021_attach(&philips_cu1216_config,
-                                        &budget_av->budget.i2c_adap, read_pwm(budget_av));
-                if (budget_av->budget.dvb_frontend != NULL) {
-                        break;
-                }
+        case SUBID_DVBS_CINERGY1200:
+                fe = stv0299_attach(&cinergy_1200s_config,
+                                    &budget_av->budget.i2c_adap);
                 break;
 
-        case 0x0031:            // KNC1 DVB-T Plus budget with AV IN (tda10046/Philips TU1216(tda6651tt))
-                saa7146_write(budget_av->budget.dev, GPIO_CTRL, 0x50000000); // Enable / PowerON Frontend
-        case 0x0030:            // KNC1 DVB-T budget (tda10046/Philips TU1216(tda6651tt))
-                budget_av->budget.dvb_frontend =
-                        tda10046_attach(&philips_tu1216_config, &budget_av->budget.i2c_adap);
-                if (budget_av->budget.dvb_frontend != NULL) {
-                        break;
-                }
+        case SUBID_DVBC_KNC1:
+        case SUBID_DVBC_KNC1_PLUS:
+                fe = tda10021_attach(&philips_cu1216_config,
+                                     &budget_av->budget.i2c_adap,
+                                     read_pwm(budget_av));
                 break;
 
-        case 0x1154:            // TerraTec Cinergy 1200 DVB-S (stv0299/Philips SU1278(tsa5059))
-                budget_av->budget.dvb_frontend =
-                        stv0299_attach(&cinergy_1200s_config, &budget_av->budget.i2c_adap);
-                if (budget_av->budget.dvb_frontend != NULL) {
-                        break;
-                }
+        case SUBID_DVBT_KNC1:
+        case SUBID_DVBT_KNC1_PLUS:
+                fe = tda10046_attach(&philips_tu1216_config,
+                                     &budget_av->budget.i2c_adap);
                 break;
 
-        case 0x1156:            // Terratec Cinergy 1200 DVB-C (tda10021/Philips CU1216(tua6034))
-                budget_av->budget.dvb_frontend =
-                        tda10021_attach(&philips_cu1216_config,
-                                        &budget_av->budget.i2c_adap, read_pwm(budget_av));
-                if (budget_av->budget.dvb_frontend) {
-                        break;
-                }
+        case SUBID_DVBC_CINERGY1200:
+                fe = tda10021_attach(&philips_cu1216_config,
+                                     &budget_av->budget.i2c_adap,
+                                     read_pwm(budget_av));
                 break;
 
-        case 0x1157:            // Terratec Cinergy 1200 DVB-T (tda10046/Philips TU1216(tda6651tt))
-                budget_av->budget.dvb_frontend =
-                        tda10046_attach(&philips_tu1216_config, &budget_av->budget.i2c_adap);
-                if (budget_av->budget.dvb_frontend) {
-                        break;
-                }
+        case SUBID_DVBT_CINERGY1200:
+                fe = tda10046_attach(&philips_tu1216_config,
+                                     &budget_av->budget.i2c_adap);
                 break;
         }
 
-        if (budget_av->budget.dvb_frontend == NULL) {
-                printk("budget_av: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n",
-                       budget_av->budget.dev->pci->vendor,
-                       budget_av->budget.dev->pci->device,
-                       budget_av->budget.dev->pci->subsystem_vendor,
-                       budget_av->budget.dev->pci->subsystem_device);
-        } else {
-                if (dvb_register_frontend
-                    (&budget_av->budget.dvb_adapter, budget_av->budget.dvb_frontend)) {
-                        printk("budget-av: Frontend registration failed!\n");
-                        if (budget_av->budget.dvb_frontend->ops->release)
-                                budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend);
-                        budget_av->budget.dvb_frontend = NULL;
-                }
+        if (fe == NULL) {
+                printk(KERN_ERR "budget-av: A frontend driver was not found "
+                                "for device %04x/%04x subsystem %04x/%04x\n",
+                       saa->pci->vendor,
+                       saa->pci->device,
+                       saa->pci->subsystem_vendor,
+                       saa->pci->subsystem_device);
+                return;
+        }
+
+        budget_av->budget.dvb_frontend = fe;
+
+        if (dvb_register_frontend(&budget_av->budget.dvb_adapter,
+                                  budget_av->budget.dvb_frontend)) {
+                printk(KERN_ERR "budget-av: Frontend registration failed!\n");
+                if (budget_av->budget.dvb_frontend->ops->release)
+                        budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend);
+                budget_av->budget.dvb_frontend = NULL;
         }
 }
 
@@ -829,6 +858,7 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
 
         memset(budget_av, 0, sizeof(struct budget_av));
 
+        budget_av->has_saa7113 = 0;
         budget_av->budget.ci_present = 0;
 
         dev->ext_priv = budget_av;
@@ -843,10 +873,7 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
         saa7146_write(dev, DD1_INIT, 0x07000600);
         saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26);
 
-        saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTHI);
-        msleep(500);
-
-        if (0 == saa7113_init(budget_av)) {
+        if (saa7113_init(budget_av) == 0) {
                 budget_av->has_saa7113 = 1;
 
                 if (0 != saa7146_vv_init(dev, &vv_data)) {
@@ -867,9 +894,7 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
 
                 saa7113_setinput(budget_av, 0);
         } else {
-                budget_av->has_saa7113 = 0;
-
-                saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
+                ciintf_init(budget_av);
         }
 
         /* fixme: find some sane values here... */
@@ -877,11 +902,11 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
 
         mac = budget_av->budget.dvb_adapter.proposed_mac;
         if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) {
-                printk("KNC1-%d: Could not read MAC from KNC1 card\n",
+                printk(KERN_ERR "KNC1-%d: Could not read MAC from KNC1 card\n",
                        budget_av->budget.dvb_adapter.num);
                 memset(mac, 0, 6);
         } else {
-                printk("KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+                printk(KERN_INFO "KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
                        budget_av->budget.dvb_adapter.num,
                        mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
         }
@@ -889,9 +914,6 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
         budget_av->budget.dvb_adapter.priv = budget_av;
         frontend_init(budget_av);
 
-        if (enable_ci)
-                ciintf_init(budget_av);
-
         return 0;
 }
 
@@ -1024,5 +1046,3 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
 MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
                    "budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)");
-module_param_named(enable_ci, enable_ci, int, 0644);
-MODULE_PARM_DESC(enable_ci, "Turn on/off CI module (default:off).");