1 files changed, 138 insertions, 1 deletions

diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 0cfccc24b190..f28d3ae59e04 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -38,6 +38,7 @@ static struct mt2060_config bristol_mt2060_config[2] = {
         }
 };
 
+
 static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
         .band_caps = BAND_VHF | BAND_UHF,
         .setup     = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0),
@@ -451,8 +452,13 @@ static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
 
 /* Number of keypresses to ignore before start repeating */
 #define RC_REPEAT_DELAY 2
+#define RC_REPEAT_DELAY_V1_20 5
 
-static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+
+
+/* Used by firmware versions < 1.20 (deprecated) */
+static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event,
+                                   int *state)
 {
         u8 key[4];
         int i;
@@ -529,6 +535,137 @@ static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
         return 0;
 }
 
+/* This is the structure of the RC response packet starting in firmware 1.20 */
+struct dib0700_rc_response {
+        u8 report_id;
+        u8 data_state;
+        u8 system_msb;
+        u8 system_lsb;
+        u8 data;
+        u8 not_data;
+};
+
+/* This supports the new IR response format for firmware v1.20 */
+static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event,
+                                  int *state)
+{
+        struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+        struct dib0700_state *st = d->priv;
+        struct dib0700_rc_response poll_reply;
+        u8 buf[6];
+        int i;
+        int status;
+        int actlen;
+        int found = 0;
+
+        /* Set initial results in case we exit the function early */
+        *event = 0;
+        *state = REMOTE_NO_KEY_PRESSED;
+
+        /* Firmware v1.20 provides RC data via bulk endpoint 1 */
+        status = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, 1), buf,
+                              sizeof(buf), &actlen, 50);
+        if (status < 0) {
+                /* No data available (meaning no key press) */
+                return 0;
+        }
+
+        if (actlen != sizeof(buf)) {
+                /* We didn't get back the 6 byte message we expected */
+                err("Unexpected RC response size [%d]", actlen);
+                return -1;
+        }
+
+        poll_reply.report_id  = buf[0];
+        poll_reply.data_state = buf[1];
+        poll_reply.system_msb = buf[2];
+        poll_reply.system_lsb = buf[3];
+        poll_reply.data       = buf[4];
+        poll_reply.not_data   = buf[5];
+
+        /*
+        info("rid=%02x ds=%02x sm=%02x sl=%02x d=%02x nd=%02x\n",
+             poll_reply.report_id, poll_reply.data_state,
+             poll_reply.system_msb, poll_reply.system_lsb,
+             poll_reply.data, poll_reply.not_data);
+        */
+
+        if ((poll_reply.data + poll_reply.not_data) != 0xff) {
+                /* Key failed integrity check */
+                err("key failed integrity check: %02x %02x %02x %02x",
+                    poll_reply.system_msb, poll_reply.system_lsb,
+                    poll_reply.data, poll_reply.not_data);
+                return -1;
+        }
+
+        /* Find the key in the map */
+        for (i = 0; i < d->props.rc_key_map_size; i++) {
+                if (keymap[i].custom == poll_reply.system_lsb &&
+                    keymap[i].data == poll_reply.data) {
+                        *event = keymap[i].event;
+                        found = 1;
+                        break;
+                }
+        }
+
+        if (found == 0) {
+                err("Unknown remote controller key: %02x %02x %02x %02x",
+                    poll_reply.system_msb, poll_reply.system_lsb,
+                    poll_reply.data, poll_reply.not_data);
+                d->last_event = 0;
+                return 0;
+        }
+
+        if (poll_reply.data_state == 1) {
+                /* New key hit */
+                st->rc_counter = 0;
+                *event = keymap[i].event;
+                *state = REMOTE_KEY_PRESSED;
+                d->last_event = keymap[i].event;
+        } else if (poll_reply.data_state == 2) {
+                /* Key repeated */
+                st->rc_counter++;
+
+                /* prevents unwanted double hits */
+                if (st->rc_counter > RC_REPEAT_DELAY_V1_20) {
+                        *event = d->last_event;
+                        *state = REMOTE_KEY_PRESSED;
+                        st->rc_counter = RC_REPEAT_DELAY_V1_20;
+                }
+        } else {
+                err("Unknown data state [%d]", poll_reply.data_state);
+        }
+
+        return 0;
+}
+
+static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+{
+        struct dib0700_state *st = d->priv;
+
+        /* Because some people may have improperly named firmware files,
+           let's figure out whether to use the new firmware call or the legacy
+           call based on the firmware version embedded in the file */
+        if (st->rc_func_version == 0) {
+                u32 hwver, romver, ramver, fwtype;
+                int ret = dib0700_get_version(d, &hwver, &romver, &ramver,
+                                              &fwtype);
+                if (ret < 0) {
+                        err("Could not determine version info");
+                        return -1;
+                }
+                if (ramver < 0x10200)
+                        st->rc_func_version = 1;
+                else
+                        st->rc_func_version = 2;
+        }
+
+        if (st->rc_func_version == 2)
+                return dib0700_rc_query_v1_20(d, event, state);
+        else
+                return dib0700_rc_query_legacy(d, event, state);
+}
+
 static struct dvb_usb_rc_key dib0700_rc_keys[] = {
         /* Key codes for the tiny Pinnacle remote*/
         { 0x07, 0x00, KEY_MUTE },