1 files changed, 85 insertions, 0 deletions

diff --git a/drivers/media/dvb/cinergyT2/Kconfig b/drivers/media/dvb/cinergyT2/Kconfig
new file mode 100644
index 000000000000..226714085f58
--- /dev/null
+++ b/drivers/media/dvb/cinergyT2/Kconfig
@@ -0,0 +1,85 @@
+config DVB_CINERGYT2
+        tristate "Terratec CinergyT2/qanu USB2 DVB-T receiver"
+        depends on DVB_CORE && USB
+        help
+          Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers
+
+          Say Y if you own such a device and want to use it.
+
+
+config DVB_CINERGYT2_TUNING
+        bool "sophisticated fine-tuning for CinergyT2 cards"
+        depends on DVB_CINERGYT2
+        help
+          Here you can fine-tune some parameters of the CinergyT2 driver.
+
+          Normally you don't need to touch this, but in exotic setups you
+          may fine-tune your setup and adjust e.g. DMA buffer sizes for
+          a particular application.
+
+
+config DVB_CINERGYT2_STREAM_URB_COUNT
+        int "Number of queued USB Request Blocks for Highspeed Stream Transfers"
+        depends on DVB_CINERGYT2_TUNING
+        default "32"
+        help
+          USB Request Blocks for Highspeed Stream transfers are scheduled in
+          a queue for the Host Controller.
+
+          Usually the default value is a safe choice.
+
+          You may increase this number if you are using this device in a 
+          Server Environment with many high-traffic USB Highspeed devices 
+          sharing the same USB bus.
+
+
+config DVB_CINERGYT2_STREAM_BUF_SIZE
+        int "Size of URB Stream Buffers for Highspeed Transfers"
+        depends on DVB_CINERGYT2_TUNING
+        default "512"
+        help
+          Should be a multiple of native buffer size of 512 bytes.
+          Default value is a safe choice.
+
+          You may increase this number if you are using this device in a 
+          Server Environment with many high-traffic USB Highspeed devices 
+          sharing the same USB bus.
+
+
+config DVB_CINERGYT2_QUERY_INTERVAL
+        int "Status update interval [milliseconds]"
+        depends on DVB_CINERGYT2_TUNING
+        default "250"
+        help
+          This is the interval for status readouts from the demodulator.
+          You may try lower values if you need more responsive signal quality
+          measurements.
+
+          Please keep in mind that these updates cause traffic on the tuner
+          control bus and thus may or may not affect receiption sensitivity.
+
+          The default value should be a safe choice for common applications.
+
+
+config DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE
+        bool "Register the onboard IR Remote Control Receiver as Input Device"
+        depends on DVB_CINERGYT2_TUNING
+        default "yes"
+        help
+          Enable this option if you want to use the onboard Infrared Remote 
+          Control Receiver as Linux-Input device.
+
+          Right now only the keycode table for the default Remote Control
+          delivered with the device is supported, please see the driver
+          source code to find out how to add support for other controls.
+
+
+config DVB_CINERGYT2_RC_QUERY_INTERVAL
+        int "Infrared Remote Controller update interval [milliseconds]"
+        depends on DVB_CINERGYT2_TUNING && DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE
+        default "100"
+        help
+          If you have a very fast-repeating remote control you can try lower
+          values, for normal consumer receivers the default value should be
+          a safe choice.
+