1 files changed, 9 insertions, 9 deletions

diff --git a/drivers/media/dvb-frontends/drxk_hard.c b/drivers/media/dvb-frontends/drxk_hard.c
index d416c15691da..bf29a3f0e6f0 100644
--- a/drivers/media/dvb-frontends/drxk_hard.c
+++ b/drivers/media/dvb-frontends/drxk_hard.c
@@ -1191,7 +1191,7 @@ static int mpegts_configure_pins(struct drxk_state *state, bool mpeg_enable)
                         goto error;
 
                 if (state->m_enable_parallel == true) {
-                        /* paralel -> enable MD1 to MD7 */
+                        /* parallel -> enable MD1 to MD7 */
                         status = write16(state, SIO_PDR_MD1_CFG__A,
                                          sio_pdr_mdx_cfg);
                         if (status < 0)
@@ -1428,7 +1428,7 @@ static int mpegts_stop(struct drxk_state *state)
 
         dprintk(1, "\n");
 
-        /* Gracefull shutdown (byte boundaries) */
+        /* Graceful shutdown (byte boundaries) */
         status = read16(state, FEC_OC_SNC_MODE__A, &fec_oc_snc_mode);
         if (status < 0)
                 goto error;
@@ -2021,7 +2021,7 @@ static int mpegts_dto_setup(struct drxk_state *state,
                 fec_oc_dto_burst_len = 204;
         }
 
-        /* Check serial or parrallel output */
+        /* Check serial or parallel output */
         fec_oc_reg_ipr_mode &= (~(FEC_OC_IPR_MODE_SERIAL__M));
         if (state->m_enable_parallel == false) {
                 /* MPEG data output is serial -> set ipr_mode[0] */
@@ -2908,7 +2908,7 @@ static int adc_synchronization(struct drxk_state *state)
                 goto error;
 
         if (count == 1) {
-                /* Try sampling on a diffrent edge */
+                /* Try sampling on a different edge */
                 u16 clk_neg = 0;
 
                 status = read16(state, IQM_AF_CLKNEG__A, &clk_neg);
@@ -3306,7 +3306,7 @@ static int dvbt_sc_command(struct drxk_state *state,
         if (status < 0)
                 goto error;
 
-        /* Retreive results parameters from SC */
+        /* Retrieve results parameters from SC */
         switch (cmd) {
                 /* All commands yielding 5 results */
                 /* All commands yielding 4 results */
@@ -3849,7 +3849,7 @@ static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz,
                 break;
         }
 #if 0
-        /* No hierachical channels support in BDA */
+        /* No hierarchical channels support in BDA */
         /* Priority (only for hierarchical channels) */
         switch (channel->priority) {
         case DRX_PRIORITY_LOW:
@@ -4081,7 +4081,7 @@ error:
 /*============================================================================*/
 
 /**
-* \brief Retreive lock status .
+* \brief Retrieve lock status .
 * \param demod    Pointer to demodulator instance.
 * \param lockStat Pointer to lock status structure.
 * \return DRXStatus_t.
@@ -6174,7 +6174,7 @@ static int init_drxk(struct drxk_state *state)
                         goto error;
 
                 /* Stamp driver version number in SCU data RAM in BCD code
-                        Done to enable field application engineers to retreive drxdriver version
+                        Done to enable field application engineers to retrieve drxdriver version
                         via I2C from SCU RAM.
                         Not using SCU command interface for SCU register access since no
                         microcode may be present.
@@ -6399,7 +6399,7 @@ static int drxk_set_parameters(struct dvb_frontend *fe)
         fe->ops.tuner_ops.get_if_frequency(fe, &IF);
         start(state, 0, IF);
 
-        /* After set_frontend, stats aren't avaliable */
+        /* After set_frontend, stats aren't available */
         p->strength.stat[0].scale = FE_SCALE_RELATIVE;
         p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
         p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;