aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/macintosh/macserial.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/macintosh/macserial.h')
-rw-r--r--drivers/macintosh/macserial.h461
1 files changed, 0 insertions, 461 deletions
diff --git a/drivers/macintosh/macserial.h b/drivers/macintosh/macserial.h
deleted file mode 100644
index bade11a7a5c3..000000000000
--- a/drivers/macintosh/macserial.h
+++ /dev/null
@@ -1,461 +0,0 @@
1/*
2 * macserial.h: Definitions for the Macintosh Z8530 serial driver.
3 *
4 * Adapted from drivers/sbus/char/sunserial.h by Paul Mackerras.
5 *
6 * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
7 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
8 */
9#ifndef _MACSERIAL_H
10#define _MACSERIAL_H
11
12#include <linux/spinlock.h>
13
14#define NUM_ZSREGS 16
15
16struct serial_struct {
17 int type;
18 int line;
19 int port;
20 int irq;
21 int flags;
22 int xmit_fifo_size;
23 int custom_divisor;
24 int baud_base;
25 unsigned short close_delay;
26 char reserved_char[2];
27 int hub6;
28 unsigned short closing_wait; /* time to wait before closing */
29 unsigned short closing_wait2; /* no longer used... */
30 int reserved[4];
31};
32
33/*
34 * For the close wait times, 0 means wait forever for serial port to
35 * flush its output. 65535 means don't wait at all.
36 */
37#define ZILOG_CLOSING_WAIT_INF 0
38#define ZILOG_CLOSING_WAIT_NONE 65535
39
40/*
41 * Definitions for ZILOG_struct (and serial_struct) flags field
42 */
43#define ZILOG_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes
44 * on the callout port */
45#define ZILOG_FOURPORT 0x0002 /* Set OU1, OUT2 per AST Fourport settings */
46#define ZILOG_SAK 0x0004 /* Secure Attention Key (Orange book) */
47#define ZILOG_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */
48
49#define ZILOG_SPD_MASK 0x0030
50#define ZILOG_SPD_HI 0x0010 /* Use 56000 instead of 38400 bps */
51
52#define ZILOG_SPD_VHI 0x0020 /* Use 115200 instead of 38400 bps */
53#define ZILOG_SPD_CUST 0x0030 /* Use user-specified divisor */
54
55#define ZILOG_SKIP_TEST 0x0040 /* Skip UART test during autoconfiguration */
56#define ZILOG_AUTO_IRQ 0x0080 /* Do automatic IRQ during autoconfiguration */
57#define ZILOG_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
58#define ZILOG_PGRP_LOCKOUT 0x0200 /* Lock out cua opens based on pgrp */
59#define ZILOG_CALLOUT_NOHUP 0x0400 /* Don't do hangups for cua device */
60
61#define ZILOG_FLAGS 0x0FFF /* Possible legal ZILOG flags */
62#define ZILOG_USR_MASK 0x0430 /* Legal flags that non-privileged
63 * users can set or reset */
64
65/* Internal flags used only by kernel/chr_drv/serial.c */
66#define ZILOG_INITIALIZED 0x80000000 /* Serial port was initialized */
67#define ZILOG_CALLOUT_ACTIVE 0x40000000 /* Call out device is active */
68#define ZILOG_NORMAL_ACTIVE 0x20000000 /* Normal device is active */
69#define ZILOG_BOOT_AUTOCONF 0x10000000 /* Autoconfigure port on bootup */
70#define ZILOG_CLOSING 0x08000000 /* Serial port is closing */
71#define ZILOG_CTS_FLOW 0x04000000 /* Do CTS flow control */
72#define ZILOG_CHECK_CD 0x02000000 /* i.e., CLOCAL */
73#define ZILOG_SLEEPING 0x01000000 /* have shut it down for sleep */
74
75/* Software state per channel */
76
77#ifdef __KERNEL__
78/*
79 * This is our internal structure for each serial port's state.
80 *
81 * Many fields are paralleled by the structure used by the serial_struct
82 * structure.
83 *
84 * For definitions of the flags field, see tty.h
85 */
86
87struct mac_serial;
88
89struct mac_zschannel {
90 volatile unsigned char* control;
91 volatile unsigned char* data;
92 spinlock_t lock;
93 /* Used for debugging */
94 struct mac_serial* parent;
95};
96
97struct mac_dma {
98 volatile struct dbdma_regs dma;
99 volatile unsigned short res_count;
100 volatile unsigned short command;
101 volatile unsigned int buf_addr;
102};
103
104struct mac_serial {
105 struct mac_serial *zs_next; /* For IRQ servicing chain */
106 struct mac_zschannel *zs_channel; /* Channel registers */
107 struct mac_zschannel *zs_chan_a; /* A side registers */
108 unsigned char read_reg_zero;
109 struct device_node* dev_node;
110 spinlock_t lock;
111
112 char soft_carrier; /* Use soft carrier on this channel */
113 char break_abort; /* Is serial console in, so process brk/abrt */
114 char kgdb_channel; /* Kgdb is running on this channel */
115 char is_cons; /* Is this our console. */
116 char is_internal_modem; /* is connected to an internal modem */
117 char is_irda; /* is connected to an IrDA codec */
118 int port_type; /* Port type for pmac_feature */
119 unsigned char tx_active; /* character is being xmitted */
120 unsigned char tx_stopped; /* output is suspended */
121 unsigned char power_wait; /* waiting for power-up delay to expire */
122
123 /* We need to know the current clock divisor
124 * to read the bps rate the chip has currently
125 * loaded.
126 */
127 unsigned char clk_divisor; /* May be 1, 16, 32, or 64 */
128 int zs_baud;
129
130 /* Current write register values */
131 unsigned char curregs[NUM_ZSREGS];
132
133 /* Values we need to set next opportunity */
134 unsigned char pendregs[NUM_ZSREGS];
135
136 char change_needed;
137
138 int magic;
139 int baud_base;
140 int port;
141 int irq;
142 int flags; /* defined in tty.h */
143 int type; /* UART type */
144 struct tty_struct *tty;
145 int read_status_mask;
146 int ignore_status_mask;
147 int timeout;
148 int xmit_fifo_size;
149 int custom_divisor;
150 int x_char; /* xon/xoff character */
151 int close_delay;
152 unsigned short closing_wait;
153 unsigned short closing_wait2;
154 unsigned long event;
155 unsigned long last_active;
156 int line;
157 int count; /* # of fd on device */
158 int blocked_open; /* # of blocked opens */
159 unsigned char *xmit_buf;
160 int xmit_head;
161 int xmit_tail;
162 int xmit_cnt;
163 struct work_struct tqueue;
164 wait_queue_head_t open_wait;
165 wait_queue_head_t close_wait;
166
167 volatile struct dbdma_regs *tx_dma;
168 int tx_dma_irq;
169 volatile struct dbdma_cmd *tx_cmds;
170 volatile struct mac_dma *rx;
171 int rx_dma_irq;
172 volatile struct dbdma_cmd **rx_cmds;
173 unsigned char **rx_char_buf;
174 unsigned char **rx_flag_buf;
175#define RX_BUF_SIZE 256
176 int rx_nbuf;
177 int rx_done_bytes;
178 int rx_ubuf;
179 int rx_fbuf;
180#define RX_NO_FBUF (-1)
181 int rx_cbuf;
182 spinlock_t rx_dma_lock;
183 int has_dma;
184 int dma_initted;
185 void *dma_priv;
186 struct timer_list poll_dma_timer;
187#define RX_DMA_TIMER (jiffies + 10*HZ/1000)
188
189 struct timer_list powerup_timer;
190};
191
192
193#define SERIAL_MAGIC 0x5301
194
195/*
196 * The size of the serial xmit buffer is 1 page, or 4096 bytes
197 */
198#define SERIAL_XMIT_SIZE 4096
199
200/*
201 * Events are used to schedule things to happen at timer-interrupt
202 * time, instead of at rs interrupt time.
203 */
204#define RS_EVENT_WRITE_WAKEUP 0
205
206#endif /* __KERNEL__ */
207
208/* Conversion routines to/from brg time constants from/to bits
209 * per second.
210 */
211#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2))
212#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2)
213
214/* The Zilog register set */
215
216#define FLAG 0x7e
217
218/* Write Register 0 */
219#define R0 0 /* Register selects */
220#define R1 1
221#define R2 2
222#define R3 3
223#define R4 4
224#define R5 5
225#define R6 6
226#define R7 7
227#define R8 8
228#define R9 9
229#define R10 10
230#define R11 11
231#define R12 12
232#define R13 13
233#define R14 14
234#define R15 15
235
236#define NULLCODE 0 /* Null Code */
237#define POINT_HIGH 0x8 /* Select upper half of registers */
238#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */
239#define SEND_ABORT 0x18 /* HDLC Abort */
240#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */
241#define RES_Tx_P 0x28 /* Reset TxINT Pending */
242#define ERR_RES 0x30 /* Error Reset */
243#define RES_H_IUS 0x38 /* Reset highest IUS */
244
245#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */
246#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */
247#define RES_EOM_L 0xC0 /* Reset EOM latch */
248
249/* Write Register 1 */
250
251#define EXT_INT_ENAB 0x1 /* Ext Int Enable */
252#define TxINT_ENAB 0x2 /* Tx Int Enable */
253#define PAR_SPEC 0x4 /* Parity is special condition */
254
255#define RxINT_DISAB 0 /* Rx Int Disable */
256#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */
257#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */
258#define INT_ERR_Rx 0x18 /* Int on error only */
259
260#define WT_RDY_RT 0x20 /* W/Req reflects recv if 1, xmit if 0 */
261#define WT_FN_RDYFN 0x40 /* W/Req pin is DMA request if 1, wait if 0 */
262#define WT_RDY_ENAB 0x80 /* Enable W/Req pin */
263
264/* Write Register #2 (Interrupt Vector) */
265
266/* Write Register 3 */
267
268#define RxENABLE 0x1 /* Rx Enable */
269#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */
270#define ADD_SM 0x4 /* Address Search Mode (SDLC) */
271#define RxCRC_ENAB 0x8 /* Rx CRC Enable */
272#define ENT_HM 0x10 /* Enter Hunt Mode */
273#define AUTO_ENAB 0x20 /* Auto Enables */
274#define Rx5 0x0 /* Rx 5 Bits/Character */
275#define Rx7 0x40 /* Rx 7 Bits/Character */
276#define Rx6 0x80 /* Rx 6 Bits/Character */
277#define Rx8 0xc0 /* Rx 8 Bits/Character */
278#define RxNBITS_MASK 0xc0
279
280/* Write Register 4 */
281
282#define PAR_ENA 0x1 /* Parity Enable */
283#define PAR_EVEN 0x2 /* Parity Even/Odd* */
284
285#define SYNC_ENAB 0 /* Sync Modes Enable */
286#define SB1 0x4 /* 1 stop bit/char */
287#define SB15 0x8 /* 1.5 stop bits/char */
288#define SB2 0xc /* 2 stop bits/char */
289#define SB_MASK 0xc
290
291#define MONSYNC 0 /* 8 Bit Sync character */
292#define BISYNC 0x10 /* 16 bit sync character */
293#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */
294#define EXTSYNC 0x30 /* External Sync Mode */
295
296#define X1CLK 0x0 /* x1 clock mode */
297#define X16CLK 0x40 /* x16 clock mode */
298#define X32CLK 0x80 /* x32 clock mode */
299#define X64CLK 0xC0 /* x64 clock mode */
300#define XCLK_MASK 0xC0
301
302/* Write Register 5 */
303
304#define TxCRC_ENAB 0x1 /* Tx CRC Enable */
305#define RTS 0x2 /* RTS */
306#define SDLC_CRC 0x4 /* SDLC/CRC-16 */
307#define TxENAB 0x8 /* Tx Enable */
308#define SND_BRK 0x10 /* Send Break */
309#define Tx5 0x0 /* Tx 5 bits (or less)/character */
310#define Tx7 0x20 /* Tx 7 bits/character */
311#define Tx6 0x40 /* Tx 6 bits/character */
312#define Tx8 0x60 /* Tx 8 bits/character */
313#define TxNBITS_MASK 0x60
314#define DTR 0x80 /* DTR */
315
316/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */
317
318/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */
319
320/* Write Register 7' (Some enhanced feature control) */
321#define ENEXREAD 0x40 /* Enable read of some write registers */
322
323/* Write Register 8 (transmit buffer) */
324
325/* Write Register 9 (Master interrupt control) */
326#define VIS 1 /* Vector Includes Status */
327#define NV 2 /* No Vector */
328#define DLC 4 /* Disable Lower Chain */
329#define MIE 8 /* Master Interrupt Enable */
330#define STATHI 0x10 /* Status high */
331#define NORESET 0 /* No reset on write to R9 */
332#define CHRB 0x40 /* Reset channel B */
333#define CHRA 0x80 /* Reset channel A */
334#define FHWRES 0xc0 /* Force hardware reset */
335
336/* Write Register 10 (misc control bits) */
337#define BIT6 1 /* 6 bit/8bit sync */
338#define LOOPMODE 2 /* SDLC Loop mode */
339#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */
340#define MARKIDLE 8 /* Mark/flag on idle */
341#define GAOP 0x10 /* Go active on poll */
342#define NRZ 0 /* NRZ mode */
343#define NRZI 0x20 /* NRZI mode */
344#define FM1 0x40 /* FM1 (transition = 1) */
345#define FM0 0x60 /* FM0 (transition = 0) */
346#define CRCPS 0x80 /* CRC Preset I/O */
347
348/* Write Register 11 (Clock Mode control) */
349#define TRxCXT 0 /* TRxC = Xtal output */
350#define TRxCTC 1 /* TRxC = Transmit clock */
351#define TRxCBR 2 /* TRxC = BR Generator Output */
352#define TRxCDP 3 /* TRxC = DPLL output */
353#define TRxCOI 4 /* TRxC O/I */
354#define TCRTxCP 0 /* Transmit clock = RTxC pin */
355#define TCTRxCP 8 /* Transmit clock = TRxC pin */
356#define TCBR 0x10 /* Transmit clock = BR Generator output */
357#define TCDPLL 0x18 /* Transmit clock = DPLL output */
358#define RCRTxCP 0 /* Receive clock = RTxC pin */
359#define RCTRxCP 0x20 /* Receive clock = TRxC pin */
360#define RCBR 0x40 /* Receive clock = BR Generator output */
361#define RCDPLL 0x60 /* Receive clock = DPLL output */
362#define RTxCX 0x80 /* RTxC Xtal/No Xtal */
363
364/* Write Register 12 (lower byte of baud rate generator time constant) */
365
366/* Write Register 13 (upper byte of baud rate generator time constant) */
367
368/* Write Register 14 (Misc control bits) */
369#define BRENABL 1 /* Baud rate generator enable */
370#define BRSRC 2 /* Baud rate generator source */
371#define DTRREQ 4 /* DTR/Request function */
372#define AUTOECHO 8 /* Auto Echo */
373#define LOOPBAK 0x10 /* Local loopback */
374#define SEARCH 0x20 /* Enter search mode */
375#define RMC 0x40 /* Reset missing clock */
376#define DISDPLL 0x60 /* Disable DPLL */
377#define SSBR 0x80 /* Set DPLL source = BR generator */
378#define SSRTxC 0xa0 /* Set DPLL source = RTxC */
379#define SFMM 0xc0 /* Set FM mode */
380#define SNRZI 0xe0 /* Set NRZI mode */
381
382/* Write Register 15 (external/status interrupt control) */
383#define EN85C30 1 /* Enable some 85c30-enhanced registers */
384#define ZCIE 2 /* Zero count IE */
385#define ENSTFIFO 4 /* Enable status FIFO (SDLC) */
386#define DCDIE 8 /* DCD IE */
387#define SYNCIE 0x10 /* Sync/hunt IE */
388#define CTSIE 0x20 /* CTS IE */
389#define TxUIE 0x40 /* Tx Underrun/EOM IE */
390#define BRKIE 0x80 /* Break/Abort IE */
391
392
393/* Read Register 0 */
394#define Rx_CH_AV 0x1 /* Rx Character Available */
395#define ZCOUNT 0x2 /* Zero count */
396#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */
397#define DCD 0x8 /* DCD */
398#define SYNC_HUNT 0x10 /* Sync/hunt */
399#define CTS 0x20 /* CTS */
400#define TxEOM 0x40 /* Tx underrun */
401#define BRK_ABRT 0x80 /* Break/Abort */
402
403/* Read Register 1 */
404#define ALL_SNT 0x1 /* All sent */
405/* Residue Data for 8 Rx bits/char programmed */
406#define RES3 0x8 /* 0/3 */
407#define RES4 0x4 /* 0/4 */
408#define RES5 0xc /* 0/5 */
409#define RES6 0x2 /* 0/6 */
410#define RES7 0xa /* 0/7 */
411#define RES8 0x6 /* 0/8 */
412#define RES18 0xe /* 1/8 */
413#define RES28 0x0 /* 2/8 */
414/* Special Rx Condition Interrupts */
415#define PAR_ERR 0x10 /* Parity error */
416#define Rx_OVR 0x20 /* Rx Overrun Error */
417#define FRM_ERR 0x40 /* CRC/Framing Error */
418#define END_FR 0x80 /* End of Frame (SDLC) */
419
420/* Read Register 2 (channel b only) - Interrupt vector */
421#define CHB_Tx_EMPTY 0x00
422#define CHB_EXT_STAT 0x02
423#define CHB_Rx_AVAIL 0x04
424#define CHB_SPECIAL 0x06
425#define CHA_Tx_EMPTY 0x08
426#define CHA_EXT_STAT 0x0a
427#define CHA_Rx_AVAIL 0x0c
428#define CHA_SPECIAL 0x0e
429#define STATUS_MASK 0x06
430
431/* Read Register 3 (interrupt pending register) ch a only */
432#define CHBEXT 0x1 /* Channel B Ext/Stat IP */
433#define CHBTxIP 0x2 /* Channel B Tx IP */
434#define CHBRxIP 0x4 /* Channel B Rx IP */
435#define CHAEXT 0x8 /* Channel A Ext/Stat IP */
436#define CHATxIP 0x10 /* Channel A Tx IP */
437#define CHARxIP 0x20 /* Channel A Rx IP */
438
439/* Read Register 8 (receive data register) */
440
441/* Read Register 10 (misc status bits) */
442#define ONLOOP 2 /* On loop */
443#define LOOPSEND 0x10 /* Loop sending */
444#define CLK2MIS 0x40 /* Two clocks missing */
445#define CLK1MIS 0x80 /* One clock missing */
446
447/* Read Register 12 (lower byte of baud rate generator constant) */
448
449/* Read Register 13 (upper byte of baud rate generator constant) */
450
451/* Read Register 15 (value of WR 15) */
452
453/* Misc macros */
454#define ZS_CLEARERR(channel) (write_zsreg(channel, 0, ERR_RES))
455#define ZS_CLEARFIFO(channel) do { volatile unsigned char garbage; \
456 garbage = read_zsdata(channel); \
457 garbage = read_zsdata(channel); \
458 garbage = read_zsdata(channel); \
459 } while(0)
460
461#endif /* !(_MACSERIAL_H) */
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-14 18:57:56 -0500