diff options
Diffstat (limited to 'drivers/leds/leds-lp5521.c')
-rw-r--r-- | drivers/leds/leds-lp5521.c | 837 |
1 files changed, 837 insertions, 0 deletions
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c new file mode 100644 index 000000000000..33facd0c45d1 --- /dev/null +++ b/drivers/leds/leds-lp5521.c | |||
@@ -0,0 +1,837 @@ | |||
1 | /* | ||
2 | * LP5521 LED chip driver. | ||
3 | * | ||
4 | * Copyright (C) 2010 Nokia Corporation | ||
5 | * | ||
6 | * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> | ||
7 | * | ||
8 | * This program is free software; you can redistribute it and/or | ||
9 | * modify it under the terms of the GNU General Public License | ||
10 | * version 2 as published by the Free Software Foundation. | ||
11 | * | ||
12 | * This program is distributed in the hope that it will be useful, but | ||
13 | * WITHOUT ANY WARRANTY; without even the implied warranty of | ||
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | ||
15 | * General Public License for more details. | ||
16 | * | ||
17 | * You should have received a copy of the GNU General Public License | ||
18 | * along with this program; if not, write to the Free Software | ||
19 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | ||
20 | * 02110-1301 USA | ||
21 | */ | ||
22 | |||
23 | #include <linux/module.h> | ||
24 | #include <linux/init.h> | ||
25 | #include <linux/i2c.h> | ||
26 | #include <linux/mutex.h> | ||
27 | #include <linux/gpio.h> | ||
28 | #include <linux/interrupt.h> | ||
29 | #include <linux/delay.h> | ||
30 | #include <linux/ctype.h> | ||
31 | #include <linux/spinlock.h> | ||
32 | #include <linux/wait.h> | ||
33 | #include <linux/leds.h> | ||
34 | #include <linux/leds-lp5521.h> | ||
35 | #include <linux/workqueue.h> | ||
36 | #include <linux/slab.h> | ||
37 | |||
38 | #define LP5521_PROGRAM_LENGTH 32 /* in bytes */ | ||
39 | |||
40 | #define LP5521_MAX_LEDS 3 /* Maximum number of LEDs */ | ||
41 | #define LP5521_MAX_ENGINES 3 /* Maximum number of engines */ | ||
42 | |||
43 | #define LP5521_ENG_MASK_BASE 0x30 /* 00110000 */ | ||
44 | #define LP5521_ENG_STATUS_MASK 0x07 /* 00000111 */ | ||
45 | |||
46 | #define LP5521_CMD_LOAD 0x15 /* 00010101 */ | ||
47 | #define LP5521_CMD_RUN 0x2a /* 00101010 */ | ||
48 | #define LP5521_CMD_DIRECT 0x3f /* 00111111 */ | ||
49 | #define LP5521_CMD_DISABLED 0x00 /* 00000000 */ | ||
50 | |||
51 | /* Registers */ | ||
52 | #define LP5521_REG_ENABLE 0x00 | ||
53 | #define LP5521_REG_OP_MODE 0x01 | ||
54 | #define LP5521_REG_R_PWM 0x02 | ||
55 | #define LP5521_REG_G_PWM 0x03 | ||
56 | #define LP5521_REG_B_PWM 0x04 | ||
57 | #define LP5521_REG_R_CURRENT 0x05 | ||
58 | #define LP5521_REG_G_CURRENT 0x06 | ||
59 | #define LP5521_REG_B_CURRENT 0x07 | ||
60 | #define LP5521_REG_CONFIG 0x08 | ||
61 | #define LP5521_REG_R_CHANNEL_PC 0x09 | ||
62 | #define LP5521_REG_G_CHANNEL_PC 0x0A | ||
63 | #define LP5521_REG_B_CHANNEL_PC 0x0B | ||
64 | #define LP5521_REG_STATUS 0x0C | ||
65 | #define LP5521_REG_RESET 0x0D | ||
66 | #define LP5521_REG_GPO 0x0E | ||
67 | #define LP5521_REG_R_PROG_MEM 0x10 | ||
68 | #define LP5521_REG_G_PROG_MEM 0x30 | ||
69 | #define LP5521_REG_B_PROG_MEM 0x50 | ||
70 | |||
71 | #define LP5521_PROG_MEM_BASE LP5521_REG_R_PROG_MEM | ||
72 | #define LP5521_PROG_MEM_SIZE 0x20 | ||
73 | |||
74 | /* Base register to set LED current */ | ||
75 | #define LP5521_REG_LED_CURRENT_BASE LP5521_REG_R_CURRENT | ||
76 | |||
77 | /* Base register to set the brightness */ | ||
78 | #define LP5521_REG_LED_PWM_BASE LP5521_REG_R_PWM | ||
79 | |||
80 | /* Bits in ENABLE register */ | ||
81 | #define LP5521_MASTER_ENABLE 0x40 /* Chip master enable */ | ||
82 | #define LP5521_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */ | ||
83 | #define LP5521_EXEC_RUN 0x2A | ||
84 | |||
85 | /* Bits in CONFIG register */ | ||
86 | #define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */ | ||
87 | #define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */ | ||
88 | #define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */ | ||
89 | #define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */ | ||
90 | #define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */ | ||
91 | #define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */ | ||
92 | #define LP5521_R_TO_BATT 4 /* R out: 0 = CP, 1 = Vbat */ | ||
93 | #define LP5521_CLK_SRC_EXT 0 /* Ext-clk source (CLK_32K) */ | ||
94 | #define LP5521_CLK_INT 1 /* Internal clock */ | ||
95 | #define LP5521_CLK_AUTO 2 /* Automatic clock selection */ | ||
96 | |||
97 | /* Status */ | ||
98 | #define LP5521_EXT_CLK_USED 0x08 | ||
99 | |||
100 | struct lp5521_engine { | ||
101 | const struct attribute_group *attributes; | ||
102 | int id; | ||
103 | u8 mode; | ||
104 | u8 prog_page; | ||
105 | u8 engine_mask; | ||
106 | }; | ||
107 | |||
108 | struct lp5521_led { | ||
109 | int id; | ||
110 | u8 chan_nr; | ||
111 | u8 led_current; | ||
112 | u8 max_current; | ||
113 | struct led_classdev cdev; | ||
114 | struct work_struct brightness_work; | ||
115 | u8 brightness; | ||
116 | }; | ||
117 | |||
118 | struct lp5521_chip { | ||
119 | struct lp5521_platform_data *pdata; | ||
120 | struct mutex lock; /* Serialize control */ | ||
121 | struct i2c_client *client; | ||
122 | struct lp5521_engine engines[LP5521_MAX_ENGINES]; | ||
123 | struct lp5521_led leds[LP5521_MAX_LEDS]; | ||
124 | u8 num_channels; | ||
125 | u8 num_leds; | ||
126 | }; | ||
127 | |||
128 | static inline struct lp5521_led *cdev_to_led(struct led_classdev *cdev) | ||
129 | { | ||
130 | return container_of(cdev, struct lp5521_led, cdev); | ||
131 | } | ||
132 | |||
133 | static inline struct lp5521_chip *engine_to_lp5521(struct lp5521_engine *engine) | ||
134 | { | ||
135 | return container_of(engine, struct lp5521_chip, | ||
136 | engines[engine->id - 1]); | ||
137 | } | ||
138 | |||
139 | static inline struct lp5521_chip *led_to_lp5521(struct lp5521_led *led) | ||
140 | { | ||
141 | return container_of(led, struct lp5521_chip, | ||
142 | leds[led->id]); | ||
143 | } | ||
144 | |||
145 | static void lp5521_led_brightness_work(struct work_struct *work); | ||
146 | |||
147 | static inline int lp5521_write(struct i2c_client *client, u8 reg, u8 value) | ||
148 | { | ||
149 | return i2c_smbus_write_byte_data(client, reg, value); | ||
150 | } | ||
151 | |||
152 | static int lp5521_read(struct i2c_client *client, u8 reg, u8 *buf) | ||
153 | { | ||
154 | s32 ret; | ||
155 | |||
156 | ret = i2c_smbus_read_byte_data(client, reg); | ||
157 | if (ret < 0) | ||
158 | return -EIO; | ||
159 | |||
160 | *buf = ret; | ||
161 | return 0; | ||
162 | } | ||
163 | |||
164 | static int lp5521_set_engine_mode(struct lp5521_engine *engine, u8 mode) | ||
165 | { | ||
166 | struct lp5521_chip *chip = engine_to_lp5521(engine); | ||
167 | struct i2c_client *client = chip->client; | ||
168 | int ret; | ||
169 | u8 engine_state; | ||
170 | |||
171 | /* Only transition between RUN and DIRECT mode are handled here */ | ||
172 | if (mode == LP5521_CMD_LOAD) | ||
173 | return 0; | ||
174 | |||
175 | if (mode == LP5521_CMD_DISABLED) | ||
176 | mode = LP5521_CMD_DIRECT; | ||
177 | |||
178 | ret = lp5521_read(client, LP5521_REG_OP_MODE, &engine_state); | ||
179 | |||
180 | /* set mode only for this engine */ | ||
181 | engine_state &= ~(engine->engine_mask); | ||
182 | mode &= engine->engine_mask; | ||
183 | engine_state |= mode; | ||
184 | ret |= lp5521_write(client, LP5521_REG_OP_MODE, engine_state); | ||
185 | |||
186 | return ret; | ||
187 | } | ||
188 | |||
189 | static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern) | ||
190 | { | ||
191 | struct lp5521_chip *chip = engine_to_lp5521(eng); | ||
192 | struct i2c_client *client = chip->client; | ||
193 | int ret; | ||
194 | int addr; | ||
195 | u8 mode; | ||
196 | |||
197 | /* move current engine to direct mode and remember the state */ | ||
198 | ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT); | ||
199 | /* Mode change requires min 500 us delay. 1 - 2 ms with margin */ | ||
200 | usleep_range(1000, 2000); | ||
201 | ret |= lp5521_read(client, LP5521_REG_OP_MODE, &mode); | ||
202 | |||
203 | /* For loading, all the engines to load mode */ | ||
204 | lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); | ||
205 | /* Mode change requires min 500 us delay. 1 - 2 ms with margin */ | ||
206 | usleep_range(1000, 2000); | ||
207 | lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_LOAD); | ||
208 | /* Mode change requires min 500 us delay. 1 - 2 ms with margin */ | ||
209 | usleep_range(1000, 2000); | ||
210 | |||
211 | addr = LP5521_PROG_MEM_BASE + eng->prog_page * LP5521_PROG_MEM_SIZE; | ||
212 | i2c_smbus_write_i2c_block_data(client, | ||
213 | addr, | ||
214 | LP5521_PROG_MEM_SIZE, | ||
215 | pattern); | ||
216 | |||
217 | ret |= lp5521_write(client, LP5521_REG_OP_MODE, mode); | ||
218 | return ret; | ||
219 | } | ||
220 | |||
221 | static int lp5521_set_led_current(struct lp5521_chip *chip, int led, u8 curr) | ||
222 | { | ||
223 | return lp5521_write(chip->client, | ||
224 | LP5521_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr, | ||
225 | curr); | ||
226 | } | ||
227 | |||
228 | static void lp5521_init_engine(struct lp5521_chip *chip, | ||
229 | const struct attribute_group *attr_group) | ||
230 | { | ||
231 | int i; | ||
232 | for (i = 0; i < ARRAY_SIZE(chip->engines); i++) { | ||
233 | chip->engines[i].id = i + 1; | ||
234 | chip->engines[i].engine_mask = LP5521_ENG_MASK_BASE >> (i * 2); | ||
235 | chip->engines[i].prog_page = i; | ||
236 | chip->engines[i].attributes = &attr_group[i]; | ||
237 | } | ||
238 | } | ||
239 | |||
240 | static int lp5521_configure(struct i2c_client *client, | ||
241 | const struct attribute_group *attr_group) | ||
242 | { | ||
243 | struct lp5521_chip *chip = i2c_get_clientdata(client); | ||
244 | int ret; | ||
245 | |||
246 | lp5521_init_engine(chip, attr_group); | ||
247 | |||
248 | /* Set all PWMs to direct control mode */ | ||
249 | ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F); | ||
250 | |||
251 | /* Enable auto-powersave, set charge pump to auto, red to battery */ | ||
252 | ret |= lp5521_write(client, LP5521_REG_CONFIG, | ||
253 | LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT); | ||
254 | |||
255 | /* Initialize all channels PWM to zero -> leds off */ | ||
256 | ret |= lp5521_write(client, LP5521_REG_R_PWM, 0); | ||
257 | ret |= lp5521_write(client, LP5521_REG_G_PWM, 0); | ||
258 | ret |= lp5521_write(client, LP5521_REG_B_PWM, 0); | ||
259 | |||
260 | /* Set engines are set to run state when OP_MODE enables engines */ | ||
261 | ret |= lp5521_write(client, LP5521_REG_ENABLE, | ||
262 | LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM | | ||
263 | LP5521_EXEC_RUN); | ||
264 | /* enable takes 500us. 1 - 2 ms leaves some margin */ | ||
265 | usleep_range(1000, 2000); | ||
266 | |||
267 | return ret; | ||
268 | } | ||
269 | |||
270 | static int lp5521_run_selftest(struct lp5521_chip *chip, char *buf) | ||
271 | { | ||
272 | int ret; | ||
273 | u8 status; | ||
274 | |||
275 | ret = lp5521_read(chip->client, LP5521_REG_STATUS, &status); | ||
276 | if (ret < 0) | ||
277 | return ret; | ||
278 | |||
279 | /* Check that ext clock is really in use if requested */ | ||
280 | if (chip->pdata && chip->pdata->clock_mode == LP5521_CLOCK_EXT) | ||
281 | if ((status & LP5521_EXT_CLK_USED) == 0) | ||
282 | return -EIO; | ||
283 | return 0; | ||
284 | } | ||
285 | |||
286 | static void lp5521_set_brightness(struct led_classdev *cdev, | ||
287 | enum led_brightness brightness) | ||
288 | { | ||
289 | struct lp5521_led *led = cdev_to_led(cdev); | ||
290 | led->brightness = (u8)brightness; | ||
291 | schedule_work(&led->brightness_work); | ||
292 | } | ||
293 | |||
294 | static void lp5521_led_brightness_work(struct work_struct *work) | ||
295 | { | ||
296 | struct lp5521_led *led = container_of(work, | ||
297 | struct lp5521_led, | ||
298 | brightness_work); | ||
299 | struct lp5521_chip *chip = led_to_lp5521(led); | ||
300 | struct i2c_client *client = chip->client; | ||
301 | |||
302 | mutex_lock(&chip->lock); | ||
303 | lp5521_write(client, LP5521_REG_LED_PWM_BASE + led->chan_nr, | ||
304 | led->brightness); | ||
305 | mutex_unlock(&chip->lock); | ||
306 | } | ||
307 | |||
308 | /* Detect the chip by setting its ENABLE register and reading it back. */ | ||
309 | static int lp5521_detect(struct i2c_client *client) | ||
310 | { | ||
311 | int ret; | ||
312 | u8 buf; | ||
313 | |||
314 | ret = lp5521_write(client, LP5521_REG_ENABLE, | ||
315 | LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM); | ||
316 | if (ret) | ||
317 | return ret; | ||
318 | /* enable takes 500us. 1 - 2 ms leaves some margin */ | ||
319 | usleep_range(1000, 2000); | ||
320 | ret = lp5521_read(client, LP5521_REG_ENABLE, &buf); | ||
321 | if (ret) | ||
322 | return ret; | ||
323 | if (buf != (LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM)) | ||
324 | return -ENODEV; | ||
325 | |||
326 | return 0; | ||
327 | } | ||
328 | |||
329 | /* Set engine mode and create appropriate sysfs attributes, if required. */ | ||
330 | static int lp5521_set_mode(struct lp5521_engine *engine, u8 mode) | ||
331 | { | ||
332 | struct lp5521_chip *chip = engine_to_lp5521(engine); | ||
333 | struct i2c_client *client = chip->client; | ||
334 | struct device *dev = &client->dev; | ||
335 | int ret = 0; | ||
336 | |||
337 | /* if in that mode already do nothing, except for run */ | ||
338 | if (mode == engine->mode && mode != LP5521_CMD_RUN) | ||
339 | return 0; | ||
340 | |||
341 | if (mode == LP5521_CMD_RUN) { | ||
342 | ret = lp5521_set_engine_mode(engine, LP5521_CMD_RUN); | ||
343 | } else if (mode == LP5521_CMD_LOAD) { | ||
344 | lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED); | ||
345 | lp5521_set_engine_mode(engine, LP5521_CMD_LOAD); | ||
346 | |||
347 | ret = sysfs_create_group(&dev->kobj, engine->attributes); | ||
348 | if (ret) | ||
349 | return ret; | ||
350 | } else if (mode == LP5521_CMD_DISABLED) { | ||
351 | lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED); | ||
352 | } | ||
353 | |||
354 | /* remove load attribute from sysfs if not in load mode */ | ||
355 | if (engine->mode == LP5521_CMD_LOAD && mode != LP5521_CMD_LOAD) | ||
356 | sysfs_remove_group(&dev->kobj, engine->attributes); | ||
357 | |||
358 | engine->mode = mode; | ||
359 | |||
360 | return ret; | ||
361 | } | ||
362 | |||
363 | static int lp5521_do_store_load(struct lp5521_engine *engine, | ||
364 | const char *buf, size_t len) | ||
365 | { | ||
366 | struct lp5521_chip *chip = engine_to_lp5521(engine); | ||
367 | struct i2c_client *client = chip->client; | ||
368 | int ret, nrchars, offset = 0, i = 0; | ||
369 | char c[3]; | ||
370 | unsigned cmd; | ||
371 | u8 pattern[LP5521_PROGRAM_LENGTH] = {0}; | ||
372 | |||
373 | while ((offset < len - 1) && (i < LP5521_PROGRAM_LENGTH)) { | ||
374 | /* separate sscanfs because length is working only for %s */ | ||
375 | ret = sscanf(buf + offset, "%2s%n ", c, &nrchars); | ||
376 | ret = sscanf(c, "%2x", &cmd); | ||
377 | if (ret != 1) | ||
378 | goto fail; | ||
379 | pattern[i] = (u8)cmd; | ||
380 | |||
381 | offset += nrchars; | ||
382 | i++; | ||
383 | } | ||
384 | |||
385 | /* Each instruction is 16bit long. Check that length is even */ | ||
386 | if (i % 2) | ||
387 | goto fail; | ||
388 | |||
389 | mutex_lock(&chip->lock); | ||
390 | ret = lp5521_load_program(engine, pattern); | ||
391 | mutex_unlock(&chip->lock); | ||
392 | |||
393 | if (ret) { | ||
394 | dev_err(&client->dev, "failed loading pattern\n"); | ||
395 | return ret; | ||
396 | } | ||
397 | |||
398 | return len; | ||
399 | fail: | ||
400 | dev_err(&client->dev, "wrong pattern format\n"); | ||
401 | return -EINVAL; | ||
402 | } | ||
403 | |||
404 | static ssize_t store_engine_load(struct device *dev, | ||
405 | struct device_attribute *attr, | ||
406 | const char *buf, size_t len, int nr) | ||
407 | { | ||
408 | struct i2c_client *client = to_i2c_client(dev); | ||
409 | struct lp5521_chip *chip = i2c_get_clientdata(client); | ||
410 | return lp5521_do_store_load(&chip->engines[nr - 1], buf, len); | ||
411 | } | ||
412 | |||
413 | #define store_load(nr) \ | ||
414 | static ssize_t store_engine##nr##_load(struct device *dev, \ | ||
415 | struct device_attribute *attr, \ | ||
416 | const char *buf, size_t len) \ | ||
417 | { \ | ||
418 | return store_engine_load(dev, attr, buf, len, nr); \ | ||
419 | } | ||
420 | store_load(1) | ||
421 | store_load(2) | ||
422 | store_load(3) | ||
423 | |||
424 | static ssize_t show_engine_mode(struct device *dev, | ||
425 | struct device_attribute *attr, | ||
426 | char *buf, int nr) | ||
427 | { | ||
428 | struct i2c_client *client = to_i2c_client(dev); | ||
429 | struct lp5521_chip *chip = i2c_get_clientdata(client); | ||
430 | switch (chip->engines[nr - 1].mode) { | ||
431 | case LP5521_CMD_RUN: | ||
432 | return sprintf(buf, "run\n"); | ||
433 | case LP5521_CMD_LOAD: | ||
434 | return sprintf(buf, "load\n"); | ||
435 | case LP5521_CMD_DISABLED: | ||
436 | return sprintf(buf, "disabled\n"); | ||
437 | default: | ||
438 | return sprintf(buf, "disabled\n"); | ||
439 | } | ||
440 | } | ||
441 | |||
442 | #define show_mode(nr) \ | ||
443 | static ssize_t show_engine##nr##_mode(struct device *dev, \ | ||
444 | struct device_attribute *attr, \ | ||
445 | char *buf) \ | ||
446 | { \ | ||
447 | return show_engine_mode(dev, attr, buf, nr); \ | ||
448 | } | ||
449 | show_mode(1) | ||
450 | show_mode(2) | ||
451 | show_mode(3) | ||
452 | |||
453 | static ssize_t store_engine_mode(struct device *dev, | ||
454 | struct device_attribute *attr, | ||
455 | const char *buf, size_t len, int nr) | ||
456 | { | ||
457 | struct i2c_client *client = to_i2c_client(dev); | ||
458 | struct lp5521_chip *chip = i2c_get_clientdata(client); | ||
459 | struct lp5521_engine *engine = &chip->engines[nr - 1]; | ||
460 | mutex_lock(&chip->lock); | ||
461 | |||
462 | if (!strncmp(buf, "run", 3)) | ||
463 | lp5521_set_mode(engine, LP5521_CMD_RUN); | ||
464 | else if (!strncmp(buf, "load", 4)) | ||
465 | lp5521_set_mode(engine, LP5521_CMD_LOAD); | ||
466 | else if (!strncmp(buf, "disabled", 8)) | ||
467 | lp5521_set_mode(engine, LP5521_CMD_DISABLED); | ||
468 | |||
469 | mutex_unlock(&chip->lock); | ||
470 | return len; | ||
471 | } | ||
472 | |||
473 | #define store_mode(nr) \ | ||
474 | static ssize_t store_engine##nr##_mode(struct device *dev, \ | ||
475 | struct device_attribute *attr, \ | ||
476 | const char *buf, size_t len) \ | ||
477 | { \ | ||
478 | return store_engine_mode(dev, attr, buf, len, nr); \ | ||
479 | } | ||
480 | store_mode(1) | ||
481 | store_mode(2) | ||
482 | store_mode(3) | ||
483 | |||
484 | static ssize_t show_max_current(struct device *dev, | ||
485 | struct device_attribute *attr, | ||
486 | char *buf) | ||
487 | { | ||
488 | struct led_classdev *led_cdev = dev_get_drvdata(dev); | ||
489 | struct lp5521_led *led = cdev_to_led(led_cdev); | ||
490 | |||
491 | return sprintf(buf, "%d\n", led->max_current); | ||
492 | } | ||
493 | |||
494 | static ssize_t show_current(struct device *dev, | ||
495 | struct device_attribute *attr, | ||
496 | char *buf) | ||
497 | { | ||
498 | struct led_classdev *led_cdev = dev_get_drvdata(dev); | ||
499 | struct lp5521_led *led = cdev_to_led(led_cdev); | ||
500 | |||
501 | return sprintf(buf, "%d\n", led->led_current); | ||
502 | } | ||
503 | |||
504 | static ssize_t store_current(struct device *dev, | ||
505 | struct device_attribute *attr, | ||
506 | const char *buf, size_t len) | ||
507 | { | ||
508 | struct led_classdev *led_cdev = dev_get_drvdata(dev); | ||
509 | struct lp5521_led *led = cdev_to_led(led_cdev); | ||
510 | struct lp5521_chip *chip = led_to_lp5521(led); | ||
511 | ssize_t ret; | ||
512 | unsigned long curr; | ||
513 | |||
514 | if (strict_strtoul(buf, 0, &curr)) | ||
515 | return -EINVAL; | ||
516 | |||
517 | if (curr > led->max_current) | ||
518 | return -EINVAL; | ||
519 | |||
520 | mutex_lock(&chip->lock); | ||
521 | ret = lp5521_set_led_current(chip, led->id, curr); | ||
522 | mutex_unlock(&chip->lock); | ||
523 | |||
524 | if (ret < 0) | ||
525 | return ret; | ||
526 | |||
527 | led->led_current = (u8)curr; | ||
528 | |||
529 | return len; | ||
530 | } | ||
531 | |||
532 | static ssize_t lp5521_selftest(struct device *dev, | ||
533 | struct device_attribute *attr, | ||
534 | char *buf) | ||
535 | { | ||
536 | struct i2c_client *client = to_i2c_client(dev); | ||
537 | struct lp5521_chip *chip = i2c_get_clientdata(client); | ||
538 | int ret; | ||
539 | |||
540 | mutex_lock(&chip->lock); | ||
541 | ret = lp5521_run_selftest(chip, buf); | ||
542 | mutex_unlock(&chip->lock); | ||
543 | return sprintf(buf, "%s\n", ret ? "FAIL" : "OK"); | ||
544 | } | ||
545 | |||
546 | /* led class device attributes */ | ||
547 | static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current); | ||
548 | static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL); | ||
549 | |||
550 | static struct attribute *lp5521_led_attributes[] = { | ||
551 | &dev_attr_led_current.attr, | ||
552 | &dev_attr_max_current.attr, | ||
553 | NULL, | ||
554 | }; | ||
555 | |||
556 | static struct attribute_group lp5521_led_attribute_group = { | ||
557 | .attrs = lp5521_led_attributes | ||
558 | }; | ||
559 | |||
560 | /* device attributes */ | ||
561 | static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUGO, | ||
562 | show_engine1_mode, store_engine1_mode); | ||
563 | static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUGO, | ||
564 | show_engine2_mode, store_engine2_mode); | ||
565 | static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUGO, | ||
566 | show_engine3_mode, store_engine3_mode); | ||
567 | static DEVICE_ATTR(engine1_load, S_IWUGO, NULL, store_engine1_load); | ||
568 | static DEVICE_ATTR(engine2_load, S_IWUGO, NULL, store_engine2_load); | ||
569 | static DEVICE_ATTR(engine3_load, S_IWUGO, NULL, store_engine3_load); | ||
570 | static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL); | ||
571 | |||
572 | static struct attribute *lp5521_attributes[] = { | ||
573 | &dev_attr_engine1_mode.attr, | ||
574 | &dev_attr_engine2_mode.attr, | ||
575 | &dev_attr_engine3_mode.attr, | ||
576 | &dev_attr_selftest.attr, | ||
577 | NULL | ||
578 | }; | ||
579 | |||
580 | static struct attribute *lp5521_engine1_attributes[] = { | ||
581 | &dev_attr_engine1_load.attr, | ||
582 | NULL | ||
583 | }; | ||
584 | |||
585 | static struct attribute *lp5521_engine2_attributes[] = { | ||
586 | &dev_attr_engine2_load.attr, | ||
587 | NULL | ||
588 | }; | ||
589 | |||
590 | static struct attribute *lp5521_engine3_attributes[] = { | ||
591 | &dev_attr_engine3_load.attr, | ||
592 | NULL | ||
593 | }; | ||
594 | |||
595 | static const struct attribute_group lp5521_group = { | ||
596 | .attrs = lp5521_attributes, | ||
597 | }; | ||
598 | |||
599 | static const struct attribute_group lp5521_engine_group[] = { | ||
600 | {.attrs = lp5521_engine1_attributes }, | ||
601 | {.attrs = lp5521_engine2_attributes }, | ||
602 | {.attrs = lp5521_engine3_attributes }, | ||
603 | }; | ||
604 | |||
605 | static int lp5521_register_sysfs(struct i2c_client *client) | ||
606 | { | ||
607 | struct device *dev = &client->dev; | ||
608 | return sysfs_create_group(&dev->kobj, &lp5521_group); | ||
609 | } | ||
610 | |||
611 | static void lp5521_unregister_sysfs(struct i2c_client *client) | ||
612 | { | ||
613 | struct lp5521_chip *chip = i2c_get_clientdata(client); | ||
614 | struct device *dev = &client->dev; | ||
615 | int i; | ||
616 | |||
617 | sysfs_remove_group(&dev->kobj, &lp5521_group); | ||
618 | |||
619 | for (i = 0; i < ARRAY_SIZE(chip->engines); i++) { | ||
620 | if (chip->engines[i].mode == LP5521_CMD_LOAD) | ||
621 | sysfs_remove_group(&dev->kobj, | ||
622 | chip->engines[i].attributes); | ||
623 | } | ||
624 | |||
625 | for (i = 0; i < chip->num_leds; i++) | ||
626 | sysfs_remove_group(&chip->leds[i].cdev.dev->kobj, | ||
627 | &lp5521_led_attribute_group); | ||
628 | } | ||
629 | |||
630 | static int __init lp5521_init_led(struct lp5521_led *led, | ||
631 | struct i2c_client *client, | ||
632 | int chan, struct lp5521_platform_data *pdata) | ||
633 | { | ||
634 | struct device *dev = &client->dev; | ||
635 | char name[32]; | ||
636 | int res; | ||
637 | |||
638 | if (chan >= LP5521_MAX_LEDS) | ||
639 | return -EINVAL; | ||
640 | |||
641 | if (pdata->led_config[chan].led_current == 0) | ||
642 | return 0; | ||
643 | |||
644 | led->led_current = pdata->led_config[chan].led_current; | ||
645 | led->max_current = pdata->led_config[chan].max_current; | ||
646 | led->chan_nr = pdata->led_config[chan].chan_nr; | ||
647 | |||
648 | if (led->chan_nr >= LP5521_MAX_LEDS) { | ||
649 | dev_err(dev, "Use channel numbers between 0 and %d\n", | ||
650 | LP5521_MAX_LEDS - 1); | ||
651 | return -EINVAL; | ||
652 | } | ||
653 | |||
654 | snprintf(name, sizeof(name), "%s:channel%d", client->name, chan); | ||
655 | led->cdev.brightness_set = lp5521_set_brightness; | ||
656 | led->cdev.name = name; | ||
657 | res = led_classdev_register(dev, &led->cdev); | ||
658 | if (res < 0) { | ||
659 | dev_err(dev, "couldn't register led on channel %d\n", chan); | ||
660 | return res; | ||
661 | } | ||
662 | |||
663 | res = sysfs_create_group(&led->cdev.dev->kobj, | ||
664 | &lp5521_led_attribute_group); | ||
665 | if (res < 0) { | ||
666 | dev_err(dev, "couldn't register current attribute\n"); | ||
667 | led_classdev_unregister(&led->cdev); | ||
668 | return res; | ||
669 | } | ||
670 | return 0; | ||
671 | } | ||
672 | |||
673 | static int lp5521_probe(struct i2c_client *client, | ||
674 | const struct i2c_device_id *id) | ||
675 | { | ||
676 | struct lp5521_chip *chip; | ||
677 | struct lp5521_platform_data *pdata; | ||
678 | int ret, i, led; | ||
679 | |||
680 | chip = kzalloc(sizeof(*chip), GFP_KERNEL); | ||
681 | if (!chip) | ||
682 | return -ENOMEM; | ||
683 | |||
684 | i2c_set_clientdata(client, chip); | ||
685 | chip->client = client; | ||
686 | |||
687 | pdata = client->dev.platform_data; | ||
688 | |||
689 | if (!pdata) { | ||
690 | dev_err(&client->dev, "no platform data\n"); | ||
691 | ret = -EINVAL; | ||
692 | goto fail1; | ||
693 | } | ||
694 | |||
695 | mutex_init(&chip->lock); | ||
696 | |||
697 | chip->pdata = pdata; | ||
698 | |||
699 | if (pdata->setup_resources) { | ||
700 | ret = pdata->setup_resources(); | ||
701 | if (ret < 0) | ||
702 | goto fail1; | ||
703 | } | ||
704 | |||
705 | if (pdata->enable) { | ||
706 | pdata->enable(0); | ||
707 | usleep_range(1000, 2000); /* Keep enable down at least 1ms */ | ||
708 | pdata->enable(1); | ||
709 | usleep_range(1000, 2000); /* 500us abs min. */ | ||
710 | } | ||
711 | |||
712 | lp5521_write(client, LP5521_REG_RESET, 0xff); | ||
713 | usleep_range(10000, 20000); /* | ||
714 | * Exact value is not available. 10 - 20ms | ||
715 | * appears to be enough for reset. | ||
716 | */ | ||
717 | ret = lp5521_detect(client); | ||
718 | |||
719 | if (ret) { | ||
720 | dev_err(&client->dev, "Chip not found\n"); | ||
721 | goto fail2; | ||
722 | } | ||
723 | |||
724 | dev_info(&client->dev, "%s programmable led chip found\n", id->name); | ||
725 | |||
726 | ret = lp5521_configure(client, lp5521_engine_group); | ||
727 | if (ret < 0) { | ||
728 | dev_err(&client->dev, "error configuring chip\n"); | ||
729 | goto fail2; | ||
730 | } | ||
731 | |||
732 | /* Initialize leds */ | ||
733 | chip->num_channels = pdata->num_channels; | ||
734 | chip->num_leds = 0; | ||
735 | led = 0; | ||
736 | for (i = 0; i < pdata->num_channels; i++) { | ||
737 | /* Do not initialize channels that are not connected */ | ||
738 | if (pdata->led_config[i].led_current == 0) | ||
739 | continue; | ||
740 | |||
741 | ret = lp5521_init_led(&chip->leds[led], client, i, pdata); | ||
742 | if (ret) { | ||
743 | dev_err(&client->dev, "error initializing leds\n"); | ||
744 | goto fail3; | ||
745 | } | ||
746 | chip->num_leds++; | ||
747 | |||
748 | chip->leds[led].id = led; | ||
749 | /* Set initial LED current */ | ||
750 | lp5521_set_led_current(chip, led, | ||
751 | chip->leds[led].led_current); | ||
752 | |||
753 | INIT_WORK(&(chip->leds[led].brightness_work), | ||
754 | lp5521_led_brightness_work); | ||
755 | |||
756 | led++; | ||
757 | } | ||
758 | |||
759 | ret = lp5521_register_sysfs(client); | ||
760 | if (ret) { | ||
761 | dev_err(&client->dev, "registering sysfs failed\n"); | ||
762 | goto fail3; | ||
763 | } | ||
764 | return ret; | ||
765 | fail3: | ||
766 | for (i = 0; i < chip->num_leds; i++) { | ||
767 | led_classdev_unregister(&chip->leds[i].cdev); | ||
768 | cancel_work_sync(&chip->leds[i].brightness_work); | ||
769 | } | ||
770 | fail2: | ||
771 | if (pdata->enable) | ||
772 | pdata->enable(0); | ||
773 | if (pdata->release_resources) | ||
774 | pdata->release_resources(); | ||
775 | fail1: | ||
776 | kfree(chip); | ||
777 | return ret; | ||
778 | } | ||
779 | |||
780 | static int lp5521_remove(struct i2c_client *client) | ||
781 | { | ||
782 | struct lp5521_chip *chip = i2c_get_clientdata(client); | ||
783 | int i; | ||
784 | |||
785 | lp5521_unregister_sysfs(client); | ||
786 | |||
787 | for (i = 0; i < chip->num_leds; i++) { | ||
788 | led_classdev_unregister(&chip->leds[i].cdev); | ||
789 | cancel_work_sync(&chip->leds[i].brightness_work); | ||
790 | } | ||
791 | |||
792 | if (chip->pdata->enable) | ||
793 | chip->pdata->enable(0); | ||
794 | if (chip->pdata->release_resources) | ||
795 | chip->pdata->release_resources(); | ||
796 | kfree(chip); | ||
797 | return 0; | ||
798 | } | ||
799 | |||
800 | static const struct i2c_device_id lp5521_id[] = { | ||
801 | { "lp5521", 0 }, /* Three channel chip */ | ||
802 | { } | ||
803 | }; | ||
804 | MODULE_DEVICE_TABLE(i2c, lp5521_id); | ||
805 | |||
806 | static struct i2c_driver lp5521_driver = { | ||
807 | .driver = { | ||
808 | .name = "lp5521", | ||
809 | }, | ||
810 | .probe = lp5521_probe, | ||
811 | .remove = lp5521_remove, | ||
812 | .id_table = lp5521_id, | ||
813 | }; | ||
814 | |||
815 | static int __init lp5521_init(void) | ||
816 | { | ||
817 | int ret; | ||
818 | |||
819 | ret = i2c_add_driver(&lp5521_driver); | ||
820 | |||
821 | if (ret < 0) | ||
822 | printk(KERN_ALERT "Adding lp5521 driver failed\n"); | ||
823 | |||
824 | return ret; | ||
825 | } | ||
826 | |||
827 | static void __exit lp5521_exit(void) | ||
828 | { | ||
829 | i2c_del_driver(&lp5521_driver); | ||
830 | } | ||
831 | |||
832 | module_init(lp5521_init); | ||
833 | module_exit(lp5521_exit); | ||
834 | |||
835 | MODULE_AUTHOR("Mathias Nyman, Yuri Zaporozhets, Samu Onkalo"); | ||
836 | MODULE_DESCRIPTION("LP5521 LED engine"); | ||
837 | MODULE_LICENSE("GPL v2"); | ||