2 files changed, 179 insertions, 292 deletions

diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c
index d9f5524593fb..8c610fa6782b 100644
--- a/drivers/isdn/i4l/isdn_common.c
+++ b/drivers/isdn/i4l/isdn_common.c
@@ -46,7 +46,6 @@ static DEFINE_MUTEX(isdn_mutex);
 static char *isdn_revision = "$Revision: 1.1.2.3 $";
 
 extern char *isdn_net_revision;
-extern char *isdn_tty_revision;
 #ifdef CONFIG_ISDN_PPP
 extern char *isdn_ppp_revision;
 #else
@@ -2327,8 +2326,6 @@ static int __init isdn_init(void)
                 dev->chanmap[i] = -1;
                 dev->m_idx[i] = -1;
                 strcpy(dev->num[i], "???");
-                init_waitqueue_head(&dev->mdm.info[i].open_wait);
-                init_waitqueue_head(&dev->mdm.info[i].close_wait);
         }
         if (register_chrdev(ISDN_MAJOR, "isdn", &isdn_fops)) {
                 printk(KERN_WARNING "isdn: Could not register control devices\n");
@@ -2353,8 +2350,6 @@ static int __init isdn_init(void)
 
         strcpy(tmprev, isdn_revision);
         printk(KERN_NOTICE "ISDN subsystem Rev: %s/", isdn_getrev(tmprev));
-        strcpy(tmprev, isdn_tty_revision);
-        printk("%s/", isdn_getrev(tmprev));
         strcpy(tmprev, isdn_net_revision);
         printk("%s/", isdn_getrev(tmprev));
         strcpy(tmprev, isdn_ppp_revision);
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 3831abdbc66f..7bc50670d7d9 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1,5 +1,4 @@
-/* $Id: isdn_tty.c,v 1.1.2.3 2004/02/10 01:07:13 keil Exp $
- *
+/*
  * Linux ISDN subsystem, tty functions and AT-command emulator (linklevel).
  *
  * Copyright 1994-1999  by Fritz Elfert (fritz@isdn4linux.de)
@@ -12,6 +11,7 @@
 #undef ISDN_TTY_STAT_DEBUG
 
 #include <linux/isdn.h>
+#include <linux/serial.h> /* ASYNC_* flags */
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/mutex.h>
@@ -48,9 +48,6 @@ static int bit2si[8] =
 static int si2bit[8] =
 {4, 1, 4, 4, 4, 4, 4, 4};
 
-char *isdn_tty_revision = "$Revision: 1.1.2.3 $";
-
-
 /* isdn_tty_try_read() is called from within isdn_tty_rcv_skb()
  * to stuff incoming data directly into a tty's flip-buffer. This
  * is done to speed up tty-receiving if the receive-queue is empty.
@@ -68,49 +65,54 @@ isdn_tty_try_read(modem_info *info, struct sk_buff *skb)
         struct tty_struct *tty;
         char last;
 
-        if (info->online) {
-                if ((tty = info->tty)) {
-                        if (info->mcr & UART_MCR_RTS) {
-                                len = skb->len
+        if (!info->online)
+                return 0;
+
+        tty = info->port.tty;
+        if (!tty)
+                return 0;
+
+        if (!(info->mcr & UART_MCR_RTS))
+                return 0;
+
+        len = skb->len
 #ifdef CONFIG_ISDN_AUDIO
-                                        + ISDN_AUDIO_SKB_DLECOUNT(skb)
+                + ISDN_AUDIO_SKB_DLECOUNT(skb)
 #endif
-                                        ;
+                ;
+
+        c = tty_buffer_request_room(tty, len);
+        if (c < len)
+                return 0;
 
-                                c = tty_buffer_request_room(tty, len);
-                                if (c >= len) {
-#ifdef CONFIG_ISDN_AUDIO
-                                        if (ISDN_AUDIO_SKB_DLECOUNT(skb)) {
-                                                int l = skb->len;
-                                                unsigned char *dp = skb->data;
-                                                while (--l) {
-                                                        if (*dp == DLE)
-                                                                tty_insert_flip_char(tty, DLE, 0);
-                                                        tty_insert_flip_char(tty, *dp++, 0);
-                                                }
-                                                if (*dp == DLE)
-                                                        tty_insert_flip_char(tty, DLE, 0);
-                                                last = *dp;
-                                        } else {
-#endif
-                                                if (len > 1)
-                                                        tty_insert_flip_string(tty, skb->data, len - 1);
-                                                last = skb->data[len - 1];
 #ifdef CONFIG_ISDN_AUDIO
-                                        }
+        if (ISDN_AUDIO_SKB_DLECOUNT(skb)) {
+                int l = skb->len;
+                unsigned char *dp = skb->data;
+                while (--l) {
+                        if (*dp == DLE)
+                                tty_insert_flip_char(tty, DLE, 0);
+                        tty_insert_flip_char(tty, *dp++, 0);
+                }
+                if (*dp == DLE)
+                        tty_insert_flip_char(tty, DLE, 0);
+                last = *dp;
+        } else {
 #endif
-                                        if (info->emu.mdmreg[REG_CPPP] & BIT_CPPP)
-                                                tty_insert_flip_char(tty, last, 0xFF);
-                                        else
-                                                tty_insert_flip_char(tty, last, TTY_NORMAL);
-                                        tty_flip_buffer_push(tty);
-                                        kfree_skb(skb);
-                                        return 1;
-                                }
-                        }
-                }
+                if (len > 1)
+                        tty_insert_flip_string(tty, skb->data, len - 1);
+                last = skb->data[len - 1];
+#ifdef CONFIG_ISDN_AUDIO
         }
-        return 0;
+#endif
+        if (info->emu.mdmreg[REG_CPPP] & BIT_CPPP)
+                tty_insert_flip_char(tty, last, 0xFF);
+        else
+                tty_insert_flip_char(tty, last, TTY_NORMAL);
+        tty_flip_buffer_push(tty);
+        kfree_skb(skb);
+
+        return 1;
 }
 
 /* isdn_tty_readmodem() is called periodically from within timer-interrupt.
@@ -128,35 +130,39 @@ isdn_tty_readmodem(void)
         modem_info *info;
 
         for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
-                if ((midx = dev->m_idx[i]) >= 0) {
-                        info = &dev->mdm.info[midx];
-                        if (info->online) {
-                                r = 0;
+                midx = dev->m_idx[i];
+                if (midx < 0)
+                        continue;
+
+                info = &dev->mdm.info[midx];
+                if (!info->online)
+                        continue;
+
+                r = 0;
 #ifdef CONFIG_ISDN_AUDIO
-                                isdn_audio_eval_dtmf(info);
-                                if ((info->vonline & 1) && (info->emu.vpar[1]))
-                                        isdn_audio_eval_silence(info);
-#endif
-                                if ((tty = info->tty)) {
-                                        if (info->mcr & UART_MCR_RTS) {
-                                                /* CISCO AsyncPPP Hack */
-                                                if (!(info->emu.mdmreg[REG_CPPP] & BIT_CPPP))
-                                                        r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 0);
-                                                else
-                                                        r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 1);
-                                                if (r)
-                                                        tty_flip_buffer_push(tty);
-                                        } else
-                                                r = 1;
-                                } else
-                                        r = 1;
-                                if (r) {
-                                        info->rcvsched = 0;
-                                        resched = 1;
-                                } else
-                                        info->rcvsched = 1;
-                        }
-                }
+                isdn_audio_eval_dtmf(info);
+                if ((info->vonline & 1) && (info->emu.vpar[1]))
+                        isdn_audio_eval_silence(info);
+#endif
+                tty = info->port.tty;
+                if (tty) {
+                        if (info->mcr & UART_MCR_RTS) {
+                                /* CISCO AsyncPPP Hack */
+                                if (!(info->emu.mdmreg[REG_CPPP] & BIT_CPPP))
+                                        r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 0);
+                                else
+                                        r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 1);
+                                if (r)
+                                        tty_flip_buffer_push(tty);
+                        } else
+                                r = 1;
+                } else
+                        r = 1;
+                if (r) {
+                        info->rcvsched = 0;
+                        resched = 1;
+                } else
+                        info->rcvsched = 1;
         }
         if (!resched)
                 isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 0);
@@ -294,7 +300,7 @@ isdn_tty_tint(modem_info *info)
         len = skb->len;
         if ((slen = isdn_writebuf_skb_stub(info->isdn_driver,
                                            info->isdn_channel, 1, skb)) == len) {
-                struct tty_struct *tty = info->tty;
+                struct tty_struct *tty = info->port.tty;
                 info->send_outstanding++;
                 info->msr &= ~UART_MSR_CTS;
                 info->lsr &= ~UART_LSR_TEMT;
@@ -327,7 +333,7 @@ isdn_tty_countDLE(unsigned char *buf, int len)
 static int
 isdn_tty_handleDLEdown(modem_info *info, atemu *m, int len)
 {
-        unsigned char *p = &info->xmit_buf[info->xmit_count];
+        unsigned char *p = &info->port.xmit_buf[info->xmit_count];
         int count = 0;
 
         while (len > 0) {
@@ -471,7 +477,7 @@ isdn_tty_senddown(modem_info *info)
                 return;
         }
         skb_reserve(skb, skb_res);
-        memcpy(skb_put(skb, buflen), info->xmit_buf, buflen);
+        memcpy(skb_put(skb, buflen), info->port.xmit_buf, buflen);
         info->xmit_count = 0;
 #ifdef CONFIG_ISDN_AUDIO
         if (info->vonline & 2) {
@@ -699,7 +705,7 @@ isdn_tty_modem_hup(modem_info *info, int local)
         printk(KERN_DEBUG "Mhup ttyI%d\n", info->line);
 #endif
         info->rcvsched = 0;
-        isdn_tty_flush_buffer(info->tty);
+        isdn_tty_flush_buffer(info->port.tty);
         if (info->online) {
                 info->last_lhup = local;
                 info->online = 0;
@@ -997,20 +1003,21 @@ isdn_tty_paranoia_check(modem_info *info, char *name, const char *routine)
 static void
 isdn_tty_change_speed(modem_info *info)
 {
+        struct tty_port *port = &info->port;
         uint cflag,
                 cval,
                 quot;
         int i;
 
-        if (!info->tty || !info->tty->termios)
+        if (!port->tty || !port->tty->termios)
                 return;
-        cflag = info->tty->termios->c_cflag;
+        cflag = port->tty->termios->c_cflag;
 
         quot = i = cflag & CBAUD;
         if (i & CBAUDEX) {
                 i &= ~CBAUDEX;
                 if (i < 1 || i > 2)
-                        info->tty->termios->c_cflag &= ~CBAUDEX;
+                        port->tty->termios->c_cflag &= ~CBAUDEX;
                 else
                         i += 15;
         }
@@ -1040,20 +1047,20 @@ isdn_tty_change_speed(modem_info *info)
 
         /* CTS flow control flag and modem status interrupts */
         if (cflag & CRTSCTS) {
-                info->flags |= ISDN_ASYNC_CTS_FLOW;
+                port->flags |= ASYNC_CTS_FLOW;
         } else
-                info->flags &= ~ISDN_ASYNC_CTS_FLOW;
+                port->flags &= ~ASYNC_CTS_FLOW;
         if (cflag & CLOCAL)
-                info->flags &= ~ISDN_ASYNC_CHECK_CD;
+                port->flags &= ~ASYNC_CHECK_CD;
         else {
-                info->flags |= ISDN_ASYNC_CHECK_CD;
+                port->flags |= ASYNC_CHECK_CD;
         }
 }
 
 static int
 isdn_tty_startup(modem_info *info)
 {
-        if (info->flags & ISDN_ASYNC_INITIALIZED)
+        if (info->port.flags & ASYNC_INITIALIZED)
                 return 0;
         isdn_lock_drivers();
 #ifdef ISDN_DEBUG_MODEM_OPEN
@@ -1063,14 +1070,14 @@ isdn_tty_startup(modem_info *info)
          * Now, initialize the UART
          */
         info->mcr = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
-        if (info->tty)
-                clear_bit(TTY_IO_ERROR, &info->tty->flags);
+        if (info->port.tty)
+                clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
         /*
          * and set the speed of the serial port
          */
         isdn_tty_change_speed(info);
 
-        info->flags |= ISDN_ASYNC_INITIALIZED;
+        info->port.flags |= ASYNC_INITIALIZED;
         info->msr |= (UART_MSR_DSR | UART_MSR_CTS);
         info->send_outstanding = 0;
         return 0;
@@ -1083,14 +1090,14 @@ isdn_tty_startup(modem_info *info)
 static void
 isdn_tty_shutdown(modem_info *info)
 {
-        if (!(info->flags & ISDN_ASYNC_INITIALIZED))
+        if (!(info->port.flags & ASYNC_INITIALIZED))
                 return;
 #ifdef ISDN_DEBUG_MODEM_OPEN
         printk(KERN_DEBUG "Shutting down isdnmodem port %d ....\n", info->line);
 #endif
         isdn_unlock_drivers();
         info->msr &= ~UART_MSR_RI;
-        if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
+        if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
                 info->mcr &= ~(UART_MCR_DTR | UART_MCR_RTS);
                 if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
                         isdn_tty_modem_reset_regs(info, 0);
@@ -1100,10 +1107,10 @@ isdn_tty_shutdown(modem_info *info)
                         isdn_tty_modem_hup(info, 1);
                 }
         }
-        if (info->tty)
-                set_bit(TTY_IO_ERROR, &info->tty->flags);
+        if (info->port.tty)
+                set_bit(TTY_IO_ERROR, &info->port.tty->flags);
 
-        info->flags &= ~ISDN_ASYNC_INITIALIZED;
+        info->port.flags &= ~ASYNC_INITIALIZED;
 }
 
 /* isdn_tty_write() is the main send-routine. It is called from the upper
@@ -1146,7 +1153,7 @@ isdn_tty_write(struct tty_struct *tty, const u_char *buf, int count)
                                 isdn_tty_check_esc(buf, m->mdmreg[REG_ESC], c,
                                                    &(m->pluscount),
                                                    &(m->lastplus));
-                        memcpy(&(info->xmit_buf[info->xmit_count]), buf, c);
+                        memcpy(&info->port.xmit_buf[info->xmit_count], buf, c);
 #ifdef CONFIG_ISDN_AUDIO
                         if (info->vonline) {
                                 int cc = isdn_tty_handleDLEdown(info, m, c);
@@ -1478,107 +1485,6 @@ isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
  * isdn_tty_open() and friends
  * ------------------------------------------------------------
  */
-static int
-isdn_tty_block_til_ready(struct tty_struct *tty, struct file *filp, modem_info *info)
-{
-        DECLARE_WAITQUEUE(wait, NULL);
-        int do_clocal = 0;
-        int retval;
-
-        /*
-         * If the device is in the middle of being closed, then block
-         * until it's done, and then try again.
-         */
-        if (tty_hung_up_p(filp) ||
-            (info->flags & ISDN_ASYNC_CLOSING)) {
-                if (info->flags & ISDN_ASYNC_CLOSING)
-                        interruptible_sleep_on(&info->close_wait);
-#ifdef MODEM_DO_RESTART
-                if (info->flags & ISDN_ASYNC_HUP_NOTIFY)
-                        return -EAGAIN;
-                else
-                        return -ERESTARTSYS;
-#else
-                return -EAGAIN;
-#endif
-        }
-        /*
-         * If non-blocking mode is set, then make the check up front
-         * and then exit.
-         */
-        if ((filp->f_flags & O_NONBLOCK) ||
-            (tty->flags & (1 << TTY_IO_ERROR))) {
-                if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE)
-                        return -EBUSY;
-                info->flags |= ISDN_ASYNC_NORMAL_ACTIVE;
-                return 0;
-        }
-        if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) {
-                if (info->normal_termios.c_cflag & CLOCAL)
-                        do_clocal = 1;
-        } else {
-                if (tty->termios->c_cflag & CLOCAL)
-                        do_clocal = 1;
-        }
-        /*
-         * Block waiting for the carrier detect and the line to become
-         * free (i.e., not in use by the callout).  While we are in
-         * this loop, info->count is dropped by one, so that
-         * isdn_tty_close() knows when to free things.  We restore it upon
-         * exit, either normal or abnormal.
-         */
-        retval = 0;
-        add_wait_queue(&info->open_wait, &wait);
-#ifdef ISDN_DEBUG_MODEM_OPEN
-        printk(KERN_DEBUG "isdn_tty_block_til_ready before block: ttyi%d, count = %d\n",
-               info->line, info->count);
-#endif
-        if (!(tty_hung_up_p(filp)))
-                info->count--;
-        info->blocked_open++;
-        while (1) {
-                set_current_state(TASK_INTERRUPTIBLE);
-                if (tty_hung_up_p(filp) ||
-                    !(info->flags & ISDN_ASYNC_INITIALIZED)) {
-#ifdef MODEM_DO_RESTART
-                        if (info->flags & ISDN_ASYNC_HUP_NOTIFY)
-                                retval = -EAGAIN;
-                        else
-                                retval = -ERESTARTSYS;
-#else
-                        retval = -EAGAIN;
-#endif
-                        break;
-                }
-                if (!(info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) &&
-                    !(info->flags & ISDN_ASYNC_CLOSING) &&
-                    (do_clocal || (info->msr & UART_MSR_DCD))) {
-                        break;
-                }
-                if (signal_pending(current)) {
-                        retval = -ERESTARTSYS;
-                        break;
-                }
-#ifdef ISDN_DEBUG_MODEM_OPEN
-                printk(KERN_DEBUG "isdn_tty_block_til_ready blocking: ttyi%d, count = %d\n",
-                       info->line, info->count);
-#endif
-                schedule();
-        }
-        current->state = TASK_RUNNING;
-        remove_wait_queue(&info->open_wait, &wait);
-        if (!tty_hung_up_p(filp))
-                info->count++;
-        info->blocked_open--;
-#ifdef ISDN_DEBUG_MODEM_OPEN
-        printk(KERN_DEBUG "isdn_tty_block_til_ready after blocking: ttyi%d, count = %d\n",
-               info->line, info->count);
-#endif
-        if (retval)
-                return retval;
-        info->flags |= ISDN_ASYNC_NORMAL_ACTIVE;
-        return 0;
-}
 
 /*
  * This routine is called whenever a serial port is opened.  It
@@ -1589,23 +1495,22 @@ isdn_tty_block_til_ready(struct tty_struct *tty, struct file *filp, modem_info *
 static int
 isdn_tty_open(struct tty_struct *tty, struct file *filp)
 {
+        struct tty_port *port;
         modem_info *info;
         int retval;
 
         info = &dev->mdm.info[tty->index];
         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_open"))
                 return -ENODEV;
-        if (!try_module_get(info->owner)) {
-                printk(KERN_WARNING "%s: cannot reserve module\n", __func__);
-                return -ENODEV;
-        }
+        port = &info->port;
 #ifdef ISDN_DEBUG_MODEM_OPEN
         printk(KERN_DEBUG "isdn_tty_open %s, count = %d\n", tty->name,
-               info->count);
+               port->count);
 #endif
-        info->count++;
+        port->count++;
         tty->driver_data = info;
-        info->tty = tty;
+        port->tty = tty;
+        tty->port = port;
         /*
          * Start up serial port
          */
@@ -1614,15 +1519,13 @@ isdn_tty_open(struct tty_struct *tty, struct file *filp)
 #ifdef ISDN_DEBUG_MODEM_OPEN
                 printk(KERN_DEBUG "isdn_tty_open return after startup\n");
 #endif
-                module_put(info->owner);
                 return retval;
         }
-        retval = isdn_tty_block_til_ready(tty, filp, info);
+        retval = tty_port_block_til_ready(port, tty, filp);
         if (retval) {
 #ifdef ISDN_DEBUG_MODEM_OPEN
                 printk(KERN_DEBUG "isdn_tty_open return after isdn_tty_block_til_ready \n");
 #endif
-                module_put(info->owner);
                 return retval;
         }
 #ifdef ISDN_DEBUG_MODEM_OPEN
@@ -1639,6 +1542,7 @@ static void
 isdn_tty_close(struct tty_struct *tty, struct file *filp)
 {
         modem_info *info = (modem_info *) tty->driver_data;
+        struct tty_port *port = &info->port;
         ulong timeout;
 
         if (!info || isdn_tty_paranoia_check(info, tty->name, "isdn_tty_close"))
@@ -1649,7 +1553,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
 #endif
                 return;
         }
-        if ((tty->count == 1) && (info->count != 1)) {
+        if ((tty->count == 1) && (port->count != 1)) {
                 /*
                  * Uh, oh.  tty->count is 1, which means that the tty
                  * structure will be freed.  Info->count should always
@@ -1658,30 +1562,21 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
                  * serial port won't be shutdown.
                  */
                 printk(KERN_ERR "isdn_tty_close: bad port count; tty->count is 1, "
-                       "info->count is %d\n", info->count);
-                info->count = 1;
+                       "info->count is %d\n", port->count);
+                port->count = 1;
         }
-        if (--info->count < 0) {
+        if (--port->count < 0) {
                 printk(KERN_ERR "isdn_tty_close: bad port count for ttyi%d: %d\n",
-                       info->line, info->count);
-                info->count = 0;
+                       info->line, port->count);
+                port->count = 0;
         }
-        if (info->count) {
+        if (port->count) {
 #ifdef ISDN_DEBUG_MODEM_OPEN
                 printk(KERN_DEBUG "isdn_tty_close after info->count != 0\n");
 #endif
-                module_put(info->owner);
                 return;
         }
-        info->flags |= ISDN_ASYNC_CLOSING;
-        /*
-         * Save the termios structure, since this port may have
-         * separate termios for callout and dialin.
-         */
-        if (info->flags & ISDN_ASYNC_NORMAL_ACTIVE)
-                info->normal_termios = *tty->termios;
-        if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE)
-                info->callout_termios = *tty->termios;
+        port->flags |= ASYNC_CLOSING;
 
         tty->closing = 1;
         /*
@@ -1690,7 +1585,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
          * interrupt driver to stop checking the data ready bit in the
          * line status register.
          */
-        if (info->flags & ISDN_ASYNC_INITIALIZED) {
+        if (port->flags & ASYNC_INITIALIZED) {
                 tty_wait_until_sent_from_close(tty, 3000);      /* 30 seconds timeout */
                 /*
                  * Before we drop DTR, make sure the UART transmitter
@@ -1708,16 +1603,10 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
         isdn_tty_shutdown(info);
         isdn_tty_flush_buffer(tty);
         tty_ldisc_flush(tty);
-        info->tty = NULL;
+        port->tty = NULL;
         info->ncarrier = 0;
-        tty->closing = 0;
-        module_put(info->owner);
-        if (info->blocked_open) {
-                msleep_interruptible(500);
-                wake_up_interruptible(&info->open_wait);
-        }
-        info->flags &= ~(ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CLOSING);
-        wake_up_interruptible(&info->close_wait);
+
+        tty_port_close_end(port, tty);
 #ifdef ISDN_DEBUG_MODEM_OPEN
         printk(KERN_DEBUG "isdn_tty_close normal exit\n");
 #endif
@@ -1730,14 +1619,15 @@ static void
 isdn_tty_hangup(struct tty_struct *tty)
 {
         modem_info *info = (modem_info *) tty->driver_data;
+        struct tty_port *port = &info->port;
 
         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_hangup"))
                 return;
         isdn_tty_shutdown(info);
-        info->count = 0;
-        info->flags &= ~(ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CALLOUT_ACTIVE);
-        info->tty = NULL;
-        wake_up_interruptible(&info->open_wait);
+        port->count = 0;
+        port->flags &= ~ASYNC_NORMAL_ACTIVE;
+        port->tty = NULL;
+        wake_up_interruptible(&port->open_wait);
 }
 
 /* This routine initializes all emulator-data.
@@ -1864,6 +1754,16 @@ static const struct tty_operations modem_ops = {
         .tiocmset = isdn_tty_tiocmset,
 };
 
+static int isdn_tty_carrier_raised(struct tty_port *port)
+{
+        modem_info *info = container_of(port, modem_info, port);
+        return info->msr & UART_MSR_DCD;
+}
+
+static const struct tty_port_operations isdn_tty_port_ops = {
+        .carrier_raised = isdn_tty_carrier_raised,
+};
+
 int
 isdn_tty_modem_init(void)
 {
@@ -1899,9 +1799,8 @@ isdn_tty_modem_init(void)
                         goto err_unregister;
                 }
 #endif
-#ifdef MODULE
-                info->owner = THIS_MODULE;
-#endif
+                tty_port_init(&info->port);
+                info->port.ops = &isdn_tty_port_ops;
                 spin_lock_init(&info->readlock);
                 sprintf(info->last_cause, "0000");
                 sprintf(info->last_num, "none");
@@ -1913,12 +1812,7 @@ isdn_tty_modem_init(void)
                 isdn_tty_modem_reset_regs(info, 1);
                 info->magic = ISDN_ASYNC_MAGIC;
                 info->line = i;
-                info->tty = NULL;
                 info->x_char = 0;
-                info->count = 0;
-                info->blocked_open = 0;
-                init_waitqueue_head(&info->open_wait);
-                init_waitqueue_head(&info->close_wait);
                 info->isdn_driver = -1;
                 info->isdn_channel = -1;
                 info->drv_index = -1;
@@ -1930,13 +1824,15 @@ isdn_tty_modem_init(void)
 #ifdef CONFIG_ISDN_AUDIO
                 skb_queue_head_init(&info->dtmf_queue);
 #endif
-                if (!(info->xmit_buf = kmalloc(ISDN_SERIAL_XMIT_MAX + 5, GFP_KERNEL))) {
+                info->port.xmit_buf = kmalloc(ISDN_SERIAL_XMIT_MAX + 5,
+                                GFP_KERNEL);
+                if (!info->port.xmit_buf) {
                         printk(KERN_ERR "Could not allocate modem xmit-buffer\n");
                         retval = -ENOMEM;
                         goto err_unregister;
                 }
                 /* Make room for T.70 header */
-                info->xmit_buf += 4;
+                info->port.xmit_buf += 4;
         }
         return 0;
 err_unregister:
@@ -1945,7 +1841,7 @@ err_unregister:
 #ifdef CONFIG_ISDN_TTY_FAX
                 kfree(info->fax);
 #endif
-                kfree(info->xmit_buf - 4);
+                kfree(info->port.xmit_buf - 4);
         }
         tty_unregister_driver(m->tty_modem);
 err:
@@ -1966,7 +1862,7 @@ isdn_tty_exit(void)
 #ifdef CONFIG_ISDN_TTY_FAX
                 kfree(info->fax);
 #endif
-                kfree(info->xmit_buf - 4);
+                kfree(info->port.xmit_buf - 4);
         }
         tty_unregister_driver(dev->mdm.tty_modem);
         put_tty_driver(dev->mdm.tty_modem);
@@ -2068,7 +1964,7 @@ isdn_tty_find_icall(int di, int ch, setup_parm *setup)
         for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
                 modem_info *info = &dev->mdm.info[i];
 
-                if (info->count == 0)
+                if (info->port.count == 0)
                         continue;
                 if ((info->emu.mdmreg[REG_SI1] & si2bit[si1]) &&  /* SI1 is matching */
                     (info->emu.mdmreg[REG_SI2] == si2)) {         /* SI2 is matching */
@@ -2076,12 +1972,12 @@ isdn_tty_find_icall(int di, int ch, setup_parm *setup)
 #ifdef ISDN_DEBUG_MODEM_ICALL
                         printk(KERN_DEBUG "m_fi: match1 wret=%d\n", wret);
                         printk(KERN_DEBUG "m_fi: idx=%d flags=%08lx drv=%d ch=%d usg=%d\n", idx,
-                               info->flags, info->isdn_driver, info->isdn_channel,
-                               dev->usage[idx]);
+                               info->port.flags, info->isdn_driver,
+                               info->isdn_channel, dev->usage[idx]);
 #endif
                         if (
 #ifndef FIX_FILE_TRANSFER
-                                (info->flags & ISDN_ASYNC_NORMAL_ACTIVE) &&
+                                (info->port.flags & ASYNC_NORMAL_ACTIVE) &&
 #endif
                                 (info->isdn_driver == -1) &&
                                 (info->isdn_channel == -1) &&
@@ -2120,8 +2016,7 @@ isdn_tty_find_icall(int di, int ch, setup_parm *setup)
         return (wret == 2) ? 3 : 0;
 }
 
-#define TTY_IS_ACTIVE(info)                                             \
-        (info->flags & (ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CALLOUT_ACTIVE))
+#define TTY_IS_ACTIVE(info)     (info->port.flags & ASYNC_NORMAL_ACTIVE)
 
 int
 isdn_tty_stat_callback(int i, isdn_ctrl *c)
@@ -2212,9 +2107,9 @@ isdn_tty_stat_callback(int i, isdn_ctrl *c)
                          * for incoming call of this device when
                          * DCD follow the state of incoming carrier
                          */
-                        if (info->blocked_open &&
+                        if (info->port.blocked_open &&
                             (info->emu.mdmreg[REG_DCD] & BIT_DCD)) {
-                                wake_up_interruptible(&info->open_wait);
+                                wake_up_interruptible(&info->port.open_wait);
                         }
 
                         /* Schedule CONNECT-Message to any tty
@@ -2222,7 +2117,8 @@ isdn_tty_stat_callback(int i, isdn_ctrl *c)
                          * set DCD-bit of its modem-status.
                          */
                         if (TTY_IS_ACTIVE(info) ||
-                            (info->blocked_open && (info->emu.mdmreg[REG_DCD] & BIT_DCD))) {
+                            (info->port.blocked_open &&
+                             (info->emu.mdmreg[REG_DCD] & BIT_DCD))) {
                                 info->msr |= UART_MSR_DCD;
                                 info->emu.charge = 0;
                                 if (info->dialing & 0xf)
@@ -2339,8 +2235,8 @@ isdn_tty_at_cout(char *msg, modem_info *info)
         l = strlen(msg);
 
         spin_lock_irqsave(&info->readlock, flags);
-        tty = info->tty;
-        if ((info->flags & ISDN_ASYNC_CLOSING) || (!tty)) {
+        tty = info->port.tty;
+        if ((info->port.flags & ASYNC_CLOSING) || (!tty)) {
                 spin_unlock_irqrestore(&info->readlock, flags);
                 return;
         }
@@ -2490,15 +2386,15 @@ isdn_tty_modem_result(int code, modem_info *info)
         case RESULT_NO_CARRIER:
 #ifdef ISDN_DEBUG_MODEM_HUP
                 printk(KERN_DEBUG "modem_result: NO CARRIER %d %d\n",
-                       (info->flags & ISDN_ASYNC_CLOSING),
-                       (!info->tty));
+                       (info->port.flags & ASYNC_CLOSING),
+                       (!info->port.tty));
 #endif
                 m->mdmreg[REG_RINGCNT] = 0;
                 del_timer(&info->nc_timer);
                 info->ncarrier = 0;
-                if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) {
+                if ((info->port.flags & ASYNC_CLOSING) || (!info->port.tty))
                         return;
-                }
+
 #ifdef CONFIG_ISDN_AUDIO
                 if (info->vonline & 1) {
 #ifdef ISDN_DEBUG_MODEM_VOICE
@@ -2629,14 +2525,11 @@ isdn_tty_modem_result(int code, modem_info *info)
                 }
         }
         if (code == RESULT_NO_CARRIER) {
-                if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) {
+                if ((info->port.flags & ASYNC_CLOSING) || (!info->port.tty))
                         return;
-                }
-                if ((info->flags & ISDN_ASYNC_CHECK_CD) &&
-                    (!((info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) &&
-                       (info->flags & ISDN_ASYNC_CALLOUT_NOHUP)))) {
-                        tty_hangup(info->tty);
-                }
+
+                if (info->port.flags & ASYNC_CHECK_CD)
+                        tty_hangup(info->port.tty);
         }
 }
 
@@ -3803,19 +3696,19 @@ isdn_tty_modem_escape(void)
         int midx;
 
         for (i = 0; i < ISDN_MAX_CHANNELS; i++)
-                if (USG_MODEM(dev->usage[i]))
-                        if ((midx = dev->m_idx[i]) >= 0) {
-                                modem_info *info = &dev->mdm.info[midx];
-                                if (info->online) {
-                                        ton = 1;
-                                        if ((info->emu.pluscount == 3) &&
-                                            time_after(jiffies , info->emu.lastplus + PLUSWAIT2)) {
-                                                info->emu.pluscount = 0;
-                                                info->online = 0;
-                                                isdn_tty_modem_result(RESULT_OK, info);
-                                        }
+                if (USG_MODEM(dev->usage[i]) && (midx = dev->m_idx[i]) >= 0) {
+                        modem_info *info = &dev->mdm.info[midx];
+                        if (info->online) {
+                                ton = 1;
+                                if ((info->emu.pluscount == 3) &&
+                                    time_after(jiffies,
+                                            info->emu.lastplus + PLUSWAIT2)) {
+                                        info->emu.pluscount = 0;
+                                        info->online = 0;
+                                        isdn_tty_modem_result(RESULT_OK, info);
                                 }
                         }
+                }
         isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, ton);
 }
 
@@ -3873,15 +3766,14 @@ isdn_tty_carrier_timeout(void)
 
         for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
                 modem_info *info = &dev->mdm.info[i];
-                if (info->dialing) {
-                        if (info->emu.carrierwait++ > info->emu.mdmreg[REG_WAITC]) {
-                                info->dialing = 0;
-                                isdn_tty_modem_result(RESULT_NO_CARRIER, info);
-                                isdn_tty_modem_hup(info, 1);
-                        }
-                        else
-                                ton = 1;
-                }
+                if (!info->dialing)
+                        continue;
+                if (info->emu.carrierwait++ > info->emu.mdmreg[REG_WAITC]) {
+                        info->dialing = 0;
+                        isdn_tty_modem_result(RESULT_NO_CARRIER, info);
+                        isdn_tty_modem_hup(info, 1);
+                } else
+                        ton = 1;
         }
         isdn_timer_ctrl(ISDN_TIMER_CARRIER, ton);
 }