28 files changed, 42 insertions, 42 deletions

diff --git a/drivers/isdn/hardware/eicon/divacapi.h b/drivers/isdn/hardware/eicon/divacapi.h
index 9f5b68037a26..e330da0c5fc0 100644
--- a/drivers/isdn/hardware/eicon/divacapi.h
+++ b/drivers/isdn/hardware/eicon/divacapi.h
@@ -673,7 +673,7 @@ struct async_s {
 
 
 /*------------------------------------------------------------------*/
-/* auxilliary states for supplementary services                     */
+/* auxiliary states for supplementary services                     */
 /*------------------------------------------------------------------*/
 
 #define IDLE                0
diff --git a/drivers/isdn/hardware/eicon/io.h b/drivers/isdn/hardware/eicon/io.h
index 0c6c650d76bb..a6f175596364 100644
--- a/drivers/isdn/hardware/eicon/io.h
+++ b/drivers/isdn/hardware/eicon/io.h
@@ -60,7 +60,7 @@ typedef struct _diva_xdi_capi_cfg {
   -------------------------------------------------------------------------- */
 struct _ISDN_ADAPTER {
  void             (* DIRequest)(PISDN_ADAPTER, ENTITY *) ;
- int                 State ; /* from NT4 1.srv, a good idea, but  a poor achievment */
+ int                 State ; /* from NT4 1.srv, a good idea, but  a poor achievement */
  int                 Initialized ;
  int         RegisteredWithDidd ;
  int                 Unavailable ;  /* callback function possible? */
diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c
index 341ef17c22ac..8c5c563c4f12 100644
--- a/drivers/isdn/hardware/eicon/message.c
+++ b/drivers/isdn/hardware/eicon/message.c
@@ -2639,7 +2639,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
     }
     else
     {
-      /* local reply if assign unsuccessfull
+      /* local reply if assign unsuccessful
          or B3 protocol allows only one layer 3 connection
            and already connected
              or B2 protocol not any LAPD
@@ -8189,7 +8189,7 @@ static word add_b23(PLCI *plci, API_PARSE *bp)
       dlc[ 0] = 15;
       if(b2_config->length >= 8) { /* PIAFS control abilities */
         dlc[ 7] = 10; 
-        dlc[16] = 2; /* Length of PIAFS extention */
+        dlc[16] = 2; /* Length of PIAFS extension */
         dlc[17] = PIAFS_UDATA_ABILITIES; /* control (UDATA) ability */
         dlc[18] = b2_config_parms[4].info[0]; /* value */
         dlc[ 0] = 18;
diff --git a/drivers/isdn/hardware/eicon/pc.h b/drivers/isdn/hardware/eicon/pc.h
index 1c6945768a35..bf6b01812400 100644
--- a/drivers/isdn/hardware/eicon/pc.h
+++ b/drivers/isdn/hardware/eicon/pc.h
@@ -701,7 +701,7 @@ Byte | 8 7 6 5 4 3 2 1
 #define PROTCAP_FREE12    0x1000  /* not used                            */
 #define PROTCAP_FREE13    0x2000  /* not used                            */
 #define PROTCAP_FREE14    0x4000  /* not used                            */
-#define PROTCAP_EXTENSION 0x8000  /* used for future extentions          */
+#define PROTCAP_EXTENSION 0x8000  /* used for future extensions          */
 /* -----------------------------------------------------------* */
 /* Onhook data transmission ETS30065901 */
 /* Message Type */
diff --git a/drivers/isdn/hardware/eicon/um_idi.c b/drivers/isdn/hardware/eicon/um_idi.c
index 6563db998d06..ac0bdd1f23fa 100644
--- a/drivers/isdn/hardware/eicon/um_idi.c
+++ b/drivers/isdn/hardware/eicon/um_idi.c
@@ -363,7 +363,7 @@ int diva_um_idi_read(void *entity,
 
                 if ((ret = (*cp_fn) (os_handle, dst, data, length)) >= 0) {
                         /*
-                           Acknowledge only if read was successfull
+                           Acknowledge only if read was successful
                          */
                         diva_data_q_ack_segment4read(q);
                 }
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index 4e3780d78ac7..f6f3c87cc7c2 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -118,7 +118,7 @@
  *      -> See hfc_multi.h for HFC_IO_MODE_* values
  *      By default, the IO mode is pci memory IO (MEMIO).
  *      Some cards require specific IO mode, so it cannot be changed.
- *      It may be usefull to set IO mode to register io (REGIO) to solve
+ *      It may be useful to set IO mode to register io (REGIO) to solve
  *      PCI bridge problems.
  *      If unsure, don't give this parameter.
  *
@@ -903,7 +903,7 @@ vpm_echocan_off(struct hfc_multi *hc, int ch)
 /*
  * Speech Design resync feature
  * NOTE: This is called sometimes outside interrupt handler.
- * We must lock irqsave, so no other interrupt (other card) will occurr!
+ * We must lock irqsave, so no other interrupt (other card) will occur!
  * Also multiple interrupts may nest, so must lock each access (lists, card)!
  */
 static inline void
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index 15d323b8be60..4343abac0b13 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -272,7 +272,7 @@ reset_hfcpci(struct hfc_pci *hc)
          * D- and monitor/CI channel are not enabled
          * STIO1 is used as output for data, B1+B2 from ST->IOM+HFC
          * STIO2 is used as data input, B1+B2 from IOM->ST
-         * ST B-channel send disabled -> continous 1s
+         * ST B-channel send disabled -> continuous 1s
          * The IOM slots are always enabled
          */
         if (test_bit(HFC_CFG_PCM, &hc->cfg)) {
diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index 3147020d188b..0cb0546ead88 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -146,7 +146,7 @@ reset_hfcpci(struct IsdnCardState *cs)
         /* D- and monitor/CI channel are not enabled */
         /* STIO1 is used as output for data, B1+B2 from ST->IOM+HFC */
         /* STIO2 is used as data input, B1+B2 from IOM->ST */
-        /* ST B-channel send disabled -> continous 1s */
+        /* ST B-channel send disabled -> continuous 1s */
         /* The IOM slots are always enabled */
         cs->hw.hfcpci.conn = 0x36;      /* set data flow directions */
         Write_hfc(cs, HFCPCI_CONNECT, cs->hw.hfcpci.conn);
diff --git a/drivers/isdn/hisax/hfc_sx.c b/drivers/isdn/hisax/hfc_sx.c
index 1235b7131ae1..156d7c63d944 100644
--- a/drivers/isdn/hisax/hfc_sx.c
+++ b/drivers/isdn/hisax/hfc_sx.c
@@ -399,7 +399,7 @@ reset_hfcsx(struct IsdnCardState *cs)
         /* D- and monitor/CI channel are not enabled */
         /* STIO1 is used as output for data, B1+B2 from ST->IOM+HFC */
         /* STIO2 is used as data input, B1+B2 from IOM->ST */
-        /* ST B-channel send disabled -> continous 1s */
+        /* ST B-channel send disabled -> continuous 1s */
         /* The IOM slots are always enabled */
         cs->hw.hfcsx.conn = 0x36;       /* set data flow directions */
         Write_hfc(cs, HFCSX_CONNECT, cs->hw.hfcsx.conn);
diff --git a/drivers/isdn/hisax/hfc_usb.h b/drivers/isdn/hisax/hfc_usb.h
index e79f56568d30..2f581c0b4693 100644
--- a/drivers/isdn/hisax/hfc_usb.h
+++ b/drivers/isdn/hisax/hfc_usb.h
@@ -126,7 +126,7 @@ static struct hfcusb_symbolic_list urb_errlist[] = {
 
 
 /*
- * device dependant information to support different
+ * device dependent information to support different
  * ISDN Ta's using the HFC-S USB chip
  */
 
diff --git a/drivers/isdn/hisax/l3dss1.c b/drivers/isdn/hisax/l3dss1.c
index cc6ee2d39880..8e2fd02ecce0 100644
--- a/drivers/isdn/hisax/l3dss1.c
+++ b/drivers/isdn/hisax/l3dss1.c
@@ -1595,7 +1595,7 @@ l3dss1_setup(struct l3_process *pc, u_char pr, void *arg)
          * Bearer Capabilities
          */
         p = skb->data;
-        /* only the first occurence 'll be detected ! */
+        /* only the first occurrence 'll be detected ! */
         if ((p = findie(p, skb->len, 0x04, 0))) {
                 if ((p[1] < 2) || (p[1] > 11))
                         err = 1;
@@ -2161,7 +2161,7 @@ static void l3dss1_redir_req_early(struct l3_process *pc, u_char pr, void *arg)
 
 /***********************************************/
 /* handle special commands for this protocol.  */
-/* Examples are call independant services like */
+/* Examples are call independent services like */
 /* remote operations with dummy  callref.      */
 /***********************************************/
 static int l3dss1_cmd_global(struct PStack *st, isdn_ctrl *ic)
diff --git a/drivers/isdn/hisax/l3ni1.c b/drivers/isdn/hisax/l3ni1.c
index f9584491fe8e..7b229c0ce115 100644
--- a/drivers/isdn/hisax/l3ni1.c
+++ b/drivers/isdn/hisax/l3ni1.c
@@ -1449,7 +1449,7 @@ l3ni1_setup(struct l3_process *pc, u_char pr, void *arg)
          * Bearer Capabilities
          */
         p = skb->data;
-        /* only the first occurence 'll be detected ! */
+        /* only the first occurrence 'll be detected ! */
         if ((p = findie(p, skb->len, 0x04, 0))) {
                 if ((p[1] < 2) || (p[1] > 11))
                         err = 1;
@@ -2017,7 +2017,7 @@ static void l3ni1_redir_req_early(struct l3_process *pc, u_char pr, void *arg)
 
 /***********************************************/
 /* handle special commands for this protocol.  */
-/* Examples are call independant services like */
+/* Examples are call independent services like */
 /* remote operations with dummy  callref.      */
 /***********************************************/
 static int l3ni1_cmd_global(struct PStack *st, isdn_ctrl *ic)
diff --git a/drivers/isdn/hisax/nj_s.c b/drivers/isdn/hisax/nj_s.c
index 2344e7b33448..a1b89524b505 100644
--- a/drivers/isdn/hisax/nj_s.c
+++ b/drivers/isdn/hisax/nj_s.c
@@ -167,7 +167,7 @@ static int __devinit njs_pci_probe(struct pci_dev *dev_netjet,
                 return(0);
         }
         /* the TJ300 and TJ320 must be detected, the IRQ handling is different
-         * unfortunatly the chips use the same device ID, but the TJ320 has
+         * unfortunately the chips use the same device ID, but the TJ320 has
          * the bit20 in status PCI cfg register set
          */
         pci_read_config_dword(dev_netjet, 0x04, &cfg);
diff --git a/drivers/isdn/hisax/st5481_b.c b/drivers/isdn/hisax/st5481_b.c
index e56e5af889b6..ed4bc564dc63 100644
--- a/drivers/isdn/hisax/st5481_b.c
+++ b/drivers/isdn/hisax/st5481_b.c
@@ -124,7 +124,7 @@ static void usb_b_out(struct st5481_bcs *bcs,int buf_nr)
 }
 
 /*
- * Start transfering (flags or data) on the B channel, since
+ * Start transferring (flags or data) on the B channel, since
  * FIFO counters has been set to a non-zero value.
  */
 static void st5481B_start_xfer(void *context)
diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c
index 10d41c5d73ed..159e8fa00fd6 100644
--- a/drivers/isdn/hisax/st5481_usb.c
+++ b/drivers/isdn/hisax/st5481_usb.c
@@ -470,7 +470,7 @@ void st5481_release_isocpipes(struct urb* urb[2])
 
 /*
  * Decode frames received on the B/D channel.
- * Note that this function will be called continously
+ * Note that this function will be called continuously
  * with 64Kbit/s / 16Kbit/s of data and hence it will be 
  * called 50 times per second with 20 ISOC descriptors. 
  * Called at interrupt.
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index 282a4467ef19..aa25e183bf79 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -9,7 +9,7 @@
     Also inspired by ELSA PCMCIA driver 
     by Klaus Lichtenwalder <Lichtenwalder@ACM.org>
     
-    Extentions to new hisax_pcmcia by Karsten Keil
+    Extensions to new hisax_pcmcia by Karsten Keil
 
     minor changes to be compatible with kernel 2.4.x
     by Jan.Schubert@GMX.li
diff --git a/drivers/isdn/hysdn/hysdn_sched.c b/drivers/isdn/hysdn/hysdn_sched.c
index 81db4a190d41..3674d30d6a03 100644
--- a/drivers/isdn/hysdn/hysdn_sched.c
+++ b/drivers/isdn/hysdn/hysdn_sched.c
@@ -143,7 +143,7 @@ hysdn_sched_tx(hysdn_card *card, unsigned char *buf,
 /* send one config line to the card and return 0 if successful, otherwise a */
 /* negative error code.                                                      */
 /* The function works with timeouts perhaps not giving the greatest speed    */
-/* sending the line, but this should be meaningless beacuse only some lines  */
+/* sending the line, but this should be meaningless because only some lines  */
 /* are to be sent and this happens very seldom.                              */
 /*****************************************************************************/
 int
diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index afeede7ee295..2a7d17c19489 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -1530,7 +1530,7 @@ isdn_net_ciscohdlck_slarp_send_keepalive(unsigned long data)
                 printk (KERN_WARNING
                                 "UPDOWN: Line protocol on Interface %s,"
                                 " changed state to down\n", lp->netdev->dev->name);
-                /* should stop routing higher-level data accross */
+                /* should stop routing higher-level data across */
         } else if ((!lp->cisco_line_state) &&
                 (myseq_diff >= 0) && (myseq_diff <= 2)) {
                 /* line down -> up */
@@ -1538,7 +1538,7 @@ isdn_net_ciscohdlck_slarp_send_keepalive(unsigned long data)
                 printk (KERN_WARNING
                                 "UPDOWN: Line protocol on Interface %s,"
                                 " changed state to up\n", lp->netdev->dev->name);
-                /* restart routing higher-level data accross */
+                /* restart routing higher-level data across */
         }
 
         if (lp->cisco_debserint)
diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c
index 9e8162c80bb0..1b002b0002a4 100644
--- a/drivers/isdn/i4l/isdn_ppp.c
+++ b/drivers/isdn/i4l/isdn_ppp.c
@@ -1514,7 +1514,7 @@ int isdn_ppp_autodial_filter(struct sk_buff *skb, isdn_net_local *lp)
 #define MP_LONGSEQ_MAXBIT       ((MP_LONGSEQ_MASK+1)>>1)
 #define MP_SHORTSEQ_MAXBIT      ((MP_SHORTSEQ_MASK+1)>>1)
 
-/* sequence-wrap safe comparisions (for long sequence)*/ 
+/* sequence-wrap safe comparisons (for long sequence)*/
 #define MP_LT(a,b)      ((a-b)&MP_LONGSEQ_MAXBIT)
 #define MP_LE(a,b)      !((b-a)&MP_LONGSEQ_MAXBIT)
 #define MP_GT(a,b)      ((b-a)&MP_LONGSEQ_MAXBIT)
@@ -1746,7 +1746,7 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp,
                  * then next fragment should be the start of new reassembly
                  * if sequence is contiguous, but we haven't reassembled yet,
                  * keep going.
-                 * if sequence is not contiguous, either clear everyting
+                 * if sequence is not contiguous, either clear everything
                  * below low watermark and set start to the next frag or
                  * clear start ptr.
                  */ 
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 3d88f15aa218..607d846ae063 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -792,7 +792,7 @@ isdn_tty_suspend(char *id, modem_info * info, atemu * m)
 }
 
 /* isdn_tty_resume() tries to resume a suspended call
- * setup of the lower levels before that. unfortunatly here is no
+ * setup of the lower levels before that. unfortunately here is no
  * checking for compatibility of used protocols implemented by Q931
  * It does the same things like isdn_tty_dial, the last command
  * is different, may be we can merge it.
diff --git a/drivers/isdn/isdnloop/isdnloop.c b/drivers/isdn/isdnloop/isdnloop.c
index b8a1098b66ed..d497db0a26d0 100644
--- a/drivers/isdn/isdnloop/isdnloop.c
+++ b/drivers/isdn/isdnloop/isdnloop.c
@@ -954,7 +954,7 @@ isdnloop_parse_cmd(isdnloop_card * card)
 /*
  * Put command-strings into the of the 'card'. In reality, execute them
  * right in place by calling isdnloop_parse_cmd(). Also copy every
- * command to the read message ringbuffer, preceeding it with a '>'.
+ * command to the read message ringbuffer, preceding it with a '>'.
  * These mesagges can be read at /dev/isdnctrl.
  *
  * Parameter:
diff --git a/drivers/isdn/mISDN/dsp.h b/drivers/isdn/mISDN/dsp.h
index 18af86879c05..8549431430f0 100644
--- a/drivers/isdn/mISDN/dsp.h
+++ b/drivers/isdn/mISDN/dsp.h
@@ -21,7 +21,7 @@
 /* options may be:
  *
  * bit 0 = use ulaw instead of alaw
- * bit 1 = enable hfc hardware accelleration for all channels
+ * bit 1 = enable hfc hardware acceleration for all channels
  *
  */
 #define DSP_OPT_ULAW            (1<<0)
diff --git a/drivers/isdn/mISDN/dsp_cmx.c b/drivers/isdn/mISDN/dsp_cmx.c
index 309bacf1fadc..4d395dea32f3 100644
--- a/drivers/isdn/mISDN/dsp_cmx.c
+++ b/drivers/isdn/mISDN/dsp_cmx.c
@@ -1513,7 +1513,7 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members)
         /* -> if echo is NOT enabled */
         if (!dsp->echo.software) {
                 /*
-                 * -> substract rx-data from conf-data,
+                 * -> subtract rx-data from conf-data,
                  * if tx-data is available, mix
                  */
                 while (r != rr && t != tt) {
@@ -1572,7 +1572,7 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members)
 send_packet:
         /*
          * send tx-data if enabled - don't filter,
-         * becuase we want what we send, not what we filtered
+         * because we want what we send, not what we filtered
          */
         if (dsp->tx_data) {
                 if (tx_data_only) {
diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c
index 6f5b54864283..2877291a9ed8 100644
--- a/drivers/isdn/mISDN/dsp_core.c
+++ b/drivers/isdn/mISDN/dsp_core.c
@@ -115,7 +115,7 @@
  *
  * The CMX has special functions for conferences with one, two and more
  * members. It will allow different types of data flow. Receive and transmit
- * data to/form upper layer may be swithed on/off individually without loosing
+ * data to/form upper layer may be swithed on/off individually without losing
  * features of CMX, Tones and DTMF.
  *
  * Echo Cancellation: Sometimes we like to cancel echo from the interface.
@@ -127,9 +127,9 @@
  *
  * If all used features can be realized in hardware, and if transmit and/or
  * receive data ist disabled, the card may not send/receive any data at all.
- * Not receiving is usefull if only announcements are played. Not sending is
- * usefull if an answering machine records audio. Not sending and receiving is
- * usefull during most states of the call. If supported by hardware, tones
+ * Not receiving is useful if only announcements are played. Not sending is
+ * useful if an answering machine records audio. Not sending and receiving is
+ * useful during most states of the call. If supported by hardware, tones
  * will be played without cpu load. Small PBXs and NT-Mode applications will
  * not need expensive hardware when processing calls.
  *
diff --git a/drivers/isdn/mISDN/dsp_dtmf.c b/drivers/isdn/mISDN/dsp_dtmf.c
index 9ae2d33b06f7..5b484c3f4af6 100644
--- a/drivers/isdn/mISDN/dsp_dtmf.c
+++ b/drivers/isdn/mISDN/dsp_dtmf.c
@@ -106,7 +106,7 @@ void dsp_dtmf_hardware(struct dsp *dsp)
  * tested it allot. it even works with very short tones (40ms). the only
  * disadvantage is, that it doesn't work good with different volumes of both
  * tones. this will happen, if accoustically coupled dialers are used.
- * it sometimes detects tones during speach, which is normal for decoders.
+ * it sometimes detects tones during speech, which is normal for decoders.
  * use sequences to given commands during calls.
  *
  * dtmf - points to a structure of the current dtmf state
@@ -244,7 +244,7 @@ coefficients:
                 if (result[i] < tresh) {
                         lowgroup = -1;
                         highgroup = -1;
-                        break;  /* noise inbetween */
+                        break;  /* noise in between */
                 }
                 /* good level found. This is allowed only one time per group */
                 if (i < NCOEFF/2) {
diff --git a/drivers/isdn/mISDN/dsp_tones.c b/drivers/isdn/mISDN/dsp_tones.c
index 7dbe54ed1deb..4e4440e8bae5 100644
--- a/drivers/isdn/mISDN/dsp_tones.c
+++ b/drivers/isdn/mISDN/dsp_tones.c
@@ -394,7 +394,7 @@ void dsp_tone_copy(struct dsp *dsp, u8 *data, int len)
         while (len) {
                 /* find sample to start with */
                 while (42) {
-                        /* warp arround */
+                        /* wrap around */
                         if (!pat->seq[index]) {
                                 count = 0;
                                 index = 0;
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index bd526f664a39..22f8ec8b9247 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -179,7 +179,7 @@ NOTE: A value of 0 equals 256 bytes of data.
 - Time Base = Timestamp of first sample in frame
 The "Time Base" is used to rearange packets and to detect packet loss.
 The 16 bits are sent in network order (MSB first) and count 1/8000 th of a
-second. This causes a wrap arround each 8,192 seconds. There is no requirement
+second. This causes a wrap around each 8,192 seconds. There is no requirement
 for the initial "Time Base", but 0 should be used for the first packet.
 In case of HDLC data, this timestamp counts the packet or byte number.
 
@@ -205,7 +205,7 @@ On Demand:
 
 If the ondemand parameter is given, the remote IP is set to 0 on timeout.
 This will stop keepalive traffic to remote. If the remote is online again,
-traffic will continue to the remote address. This is usefull for road warriors.
+traffic will continue to the remote address. This is useful for road warriors.
 This feature only works with ID set, otherwhise it is highly unsecure.
 
 
@@ -590,7 +590,7 @@ multiframe:
                         return;
                 }
         } else
-                mlen = len-2; /* single frame, substract timebase */
+                mlen = len-2; /* single frame, subtract timebase */
 
         if (len < 2) {
                 printk(KERN_WARNING "%s: packet error - packet too short, time "
diff --git a/drivers/isdn/mISDN/layer2.c b/drivers/isdn/mISDN/layer2.c
index 9e1610f40e16..5bc00156315e 100644
--- a/drivers/isdn/mISDN/layer2.c
+++ b/drivers/isdn/mISDN/layer2.c
@@ -1864,7 +1864,7 @@ ph_data_indication(struct layer2 *l2, struct mISDNhead *hh, struct sk_buff *skb)
                 psapi >>= 2;
                 ptei >>= 1;
                 if (psapi != l2->sapi) {
-                        /* not our bussiness */
+                        /* not our business */
                         if (*debug & DEBUG_L2)
                                 printk(KERN_DEBUG "%s: sapi %d/%d mismatch\n",
                                         __func__, psapi, l2->sapi);
@@ -1872,7 +1872,7 @@ ph_data_indication(struct layer2 *l2, struct mISDNhead *hh, struct sk_buff *skb)
                         return 0;
                 }
                 if ((ptei != l2->tei) && (ptei != GROUP_TEI)) {
-                        /* not our bussiness */
+                        /* not our business */
                         if (*debug & DEBUG_L2)
                                 printk(KERN_DEBUG "%s: tei %d/%d mismatch\n",
                                         __func__, ptei, l2->tei);