1 files changed, 24 insertions, 85 deletions

diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index c63e2f49da8a..ff5ec3cbeb77 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -140,7 +140,7 @@
  * #define HFC_REGISTER_DEBUG
  */
 
-static const char *hfcmulti_revision = "2.02";
+#define HFC_MULTI_VERSION       "2.03"
 
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -165,10 +165,6 @@ static LIST_HEAD(HFClist);
 static spinlock_t HFClock; /* global hfc list lock */
 
 static void ph_state_change(struct dchannel *);
-static void (*hfc_interrupt)(void);
-static void (*register_interrupt)(void);
-static int (*unregister_interrupt)(void);
-static int interrupt_registered;
 
 static struct hfc_multi *syncmaster;
 static int plxsd_master; /* if we have a master card (yet) */
@@ -209,6 +205,7 @@ static int	HFC_cnt, Port_cnt, PCM_cnt = 99;
 
 MODULE_AUTHOR("Andreas Eversberg");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(HFC_MULTI_VERSION);
 module_param(debug, uint, S_IRUGO | S_IWUSR);
 module_param(poll, uint, S_IRUGO | S_IWUSR);
 module_param(timer, uint, S_IRUGO | S_IWUSR);
@@ -1419,19 +1416,6 @@ controller_fail:
         HFC_outb(hc, R_TI_WD, poll_timer);
         hc->hw.r_irqmsk_misc |= V_TI_IRQMSK;
 
-        /*
-         * set up 125us interrupt, only if function pointer is available
-         * and module parameter timer is set
-         */
-        if (timer && hfc_interrupt && register_interrupt) {
-                /* only one chip should use this interrupt */
-                timer = 0;
-                interrupt_registered = 1;
-                hc->hw.r_irqmsk_misc |= V_PROC_IRQMSK;
-                /* deactivate other interrupts in ztdummy */
-                register_interrupt();
-        }
-
         /* set E1 state machine IRQ */
         if (hc->type == 1)
                 hc->hw.r_irqmsk_misc |= V_STA_IRQMSK;
@@ -2583,7 +2567,6 @@ hfcmulti_interrupt(int intno, void *dev_id)
         static int iq1 = 0, iq2 = 0, iq3 = 0, iq4 = 0,
             iq5 = 0, iq6 = 0, iqcnt = 0;
 #endif
-        static int              count;
         struct hfc_multi        *hc = dev_id;
         struct dchannel         *dch;
         u_char                  r_irq_statech, status, r_irq_misc, r_irq_oview;
@@ -2698,16 +2681,11 @@ hfcmulti_interrupt(int intno, void *dev_id)
                         /* -> DTMF IRQ */
                         hfcmulti_dtmf(hc);
                 }
-                /* TODO: REPLACE !!!! 125 us Interrupts are not acceptable  */
                 if (r_irq_misc & V_IRQ_PROC) {
-                        /* IRQ every 125us */
-                        count++;
-                        /* generate 1kHz signal */
-                        if (count == 8) {
-                                if (hfc_interrupt)
-                                        hfc_interrupt();
-                                count = 0;
-                        }
+                        static int irq_proc_cnt;
+                        if (!irq_proc_cnt++)
+                                printk(KERN_WARNING "%s: got V_IRQ_PROC -"
+                                    " this should not happen\n", __func__);
                 }
 
         }
@@ -4945,9 +4923,7 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
         switch (m->dip_type) {
         case DIP_4S:
                 /*
-                 * get DIP Setting for beroNet 1S/2S/4S cards
-                 *  check if Port Jumper config matches
-                 * module param 'protocol'
+                 * Get DIP setting for beroNet 1S/2S/4S cards
                  * DIP Setting: (collect GPIO 13/14/15 (R_GPIO_IN1) +
                  * GPI 19/23 (R_GPI_IN2))
                  */
@@ -4966,9 +4942,8 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
                 break;
         case DIP_8S:
                 /*
-                 * get DIP Setting for beroNet 8S0+ cards
-                 *
-                 * enable PCI auxbridge function
+                 * Get DIP Setting for beroNet 8S0+ cards
+                 * Enable PCI auxbridge function
                  */
                 HFC_outb(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK);
                 /* prepare access to auxport */
@@ -5137,8 +5112,7 @@ static struct pci_device_id hfmultipci_ids[] __devinitdata = {
         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
         PCI_DEVICE_ID_CCD_HFC8S, 0, 0, H(14)}, /* old Eval */
         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
-        PCI_SUBDEVICE_ID_CCD_IOB8STR, 0, 0, H(15)},
-            /* IOB8ST Recording */
+        PCI_SUBDEVICE_ID_CCD_IOB8STR, 0, 0, H(15)}, /* IOB8ST Recording */
         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
                 PCI_SUBDEVICE_ID_CCD_IOB8ST, 0, 0, H(16)}, /* IOB8ST  */
         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
@@ -5188,18 +5162,16 @@ hfcmulti_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
         struct hm_map   *m = (struct hm_map *)ent->driver_data;
         int             ret;
 
-        if (m == NULL) {
-                if (ent->vendor == PCI_VENDOR_ID_CCD)
-                        if (ent->device == PCI_DEVICE_ID_CCD_HFC4S ||
-                            ent->device == PCI_DEVICE_ID_CCD_HFC8S ||
-                            ent->device == PCI_DEVICE_ID_CCD_HFCE1)
-                                printk(KERN_ERR
-                                    "unknown HFC multiport controller "
-                                    "(vendor:%x device:%x subvendor:%x "
-                                    "subdevice:%x) Please contact the "
-                                    "driver maintainer for support.\n",
-                                    ent->vendor, ent->device,
-                                    ent->subvendor, ent->subdevice);
+        if (m == NULL && ent->vendor == PCI_VENDOR_ID_CCD && (
+            ent->device == PCI_DEVICE_ID_CCD_HFC4S ||
+            ent->device == PCI_DEVICE_ID_CCD_HFC8S ||
+            ent->device == PCI_DEVICE_ID_CCD_HFCE1)) {
+                printk(KERN_ERR
+                    "Unknown HFC multiport controller (vendor:%x device:%x "
+                    "subvendor:%x subdevice:%x)\n", ent->vendor, ent->device,
+                    ent->subvendor, ent->subdevice);
+                printk(KERN_ERR
+                    "Please contact the driver maintainer for support.\n");
                 return -ENODEV;
         }
         ret = hfcmulti_init(pdev, ent);
@@ -5222,22 +5194,9 @@ HFCmulti_cleanup(void)
 {
         struct hfc_multi *card, *next;
 
-        /* unload interrupt function symbol */
-        if (hfc_interrupt)
-                symbol_put(ztdummy_extern_interrupt);
-        if (register_interrupt)
-                symbol_put(ztdummy_register_interrupt);
-        if (unregister_interrupt) {
-                if (interrupt_registered) {
-                        interrupt_registered = 0;
-                        unregister_interrupt();
-                }
-                symbol_put(ztdummy_unregister_interrupt);
-        }
-
+        /* get rid of all devices of this driver */
         list_for_each_entry_safe(card, next, &HFClist, list)
                 release_card(card);
-        /* get rid of all devices of this driver */
         pci_unregister_driver(&hfcmultipci_driver);
 }
 
@@ -5246,8 +5205,10 @@ HFCmulti_init(void)
 {
         int err;
 
+        printk(KERN_INFO "mISDN: HFC-multi driver %s\n", HFC_MULTI_VERSION);
+
 #ifdef IRQ_DEBUG
-        printk(KERN_ERR "%s: IRQ_DEBUG IS ENABLED!\n", __func__);
+        printk(KERN_DEBUG "%s: IRQ_DEBUG IS ENABLED!\n", __func__);
 #endif
 
         spin_lock_init(&HFClock);
@@ -5256,22 +5217,11 @@ HFCmulti_init(void)
         if (debug & DEBUG_HFCMULTI_INIT)
                 printk(KERN_DEBUG "%s: init entered\n", __func__);
 
-        hfc_interrupt = symbol_get(ztdummy_extern_interrupt);
-        register_interrupt = symbol_get(ztdummy_register_interrupt);
-        unregister_interrupt = symbol_get(ztdummy_unregister_interrupt);
-        printk(KERN_INFO "mISDN: HFC-multi driver %s\n",
-            hfcmulti_revision);
-
         switch (poll) {
         case 0:
                 poll_timer = 6;
                 poll = 128;
                 break;
-                /*
-                 * wenn dieses break nochmal verschwindet,
-                 * gibt es heisse ohren :-)
-                 * "without the break you will get hot ears ???"
-                 */
         case 8:
                 poll_timer = 2;
                 break;
@@ -5301,17 +5251,6 @@ HFCmulti_init(void)
         err = pci_register_driver(&hfcmultipci_driver);
         if (err < 0) {
                 printk(KERN_ERR "error registering pci driver: %x\n", err);
-                if (hfc_interrupt)
-                        symbol_put(ztdummy_extern_interrupt);
-                if (register_interrupt)
-                        symbol_put(ztdummy_register_interrupt);
-                if (unregister_interrupt) {
-                        if (interrupt_registered) {
-                                interrupt_registered = 0;
-                                unregister_interrupt();
-                        }
-                        symbol_put(ztdummy_unregister_interrupt);
-                }
                 return err;
         }
         return 0;