aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input')
-rw-r--r--drivers/input/misc/Kconfig88
-rw-r--r--drivers/input/misc/Makefile9
-rw-r--r--drivers/input/misc/ati_remote.c862
-rw-r--r--drivers/input/misc/ati_remote2.c543
-rw-r--r--drivers/input/misc/keyspan_remote.c592
-rw-r--r--drivers/input/misc/map_to_7segment.h189
-rw-r--r--drivers/input/misc/powermate.c463
-rw-r--r--drivers/input/misc/yealink.c1004
-rw-r--r--drivers/input/misc/yealink.h220
9 files changed, 3961 insertions, 9 deletions
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 1d0d3e765db6..6013ace94d98 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -40,6 +40,18 @@ config INPUT_M68K_BEEP
40 tristate "M68k Beeper support" 40 tristate "M68k Beeper support"
41 depends on M68K 41 depends on M68K
42 42
43config INPUT_IXP4XX_BEEPER
44 tristate "IXP4XX Beeper support"
45 depends on ARCH_IXP4XX
46 help
47 If you say yes here, you can connect a beeper to the
48 ixp4xx gpio pins. This is used by the LinkSys NSLU2.
49
50 If unsure, say Y.
51
52 To compile this driver as a module, choose M here: the
53 module will be called ixp4xx-beeper.
54
43config INPUT_COBALT_BTNS 55config INPUT_COBALT_BTNS
44 tristate "Cobalt button interface" 56 tristate "Cobalt button interface"
45 depends on MIPS_COBALT 57 depends on MIPS_COBALT
@@ -70,17 +82,79 @@ config INPUT_ATLAS_BTNS
70 To compile this driver as a module, choose M here: the module will 82 To compile this driver as a module, choose M here: the module will
71 be called atlas_btns. 83 be called atlas_btns.
72 84
73config INPUT_IXP4XX_BEEPER 85config INPUT_ATI_REMOTE
74 tristate "IXP4XX Beeper support" 86 tristate "ATI / X10 USB RF remote control"
75 depends on ARCH_IXP4XX 87 select USB
76 help 88 help
77 If you say yes here, you can connect a beeper to the 89 Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
78 ixp4xx gpio pins. This is used by the LinkSys NSLU2. 90 These are RF remotes with USB receivers.
91 The ATI remote comes with many of ATI's All-In-Wonder video cards.
92 The X10 "Lola" remote is available at:
93 <http://www.x10.com/products/lola_sg1.htm>
94 This driver provides mouse pointer, left and right mouse buttons,
95 and maps all the other remote buttons to keypress events.
96
97 To compile this driver as a module, choose M here: the module will be
98 called ati_remote.
99
100config INPUT_ATI_REMOTE2
101 tristate "ATI / Philips USB RF remote control"
102 select USB
103 help
104 Say Y here if you want to use an ATI or Philips USB RF remote control.
105 These are RF remotes with USB receivers.
106 ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
107 and is also available as a separate product.
108 This driver provides mouse pointer, left and right mouse buttons,
109 and maps all the other remote buttons to keypress events.
110
111 To compile this driver as a module, choose M here: the module will be
112 called ati_remote2.
113
114config INPUT_KEYSPAN_REMOTE
115 tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"
116 depends on EXPERIMENTAL
117 select USB
118 help
119 Say Y here if you want to use a Keyspan DMR USB remote control.
120 Currently only the UIA-11 type of receiver has been tested. The tag
121 on the receiver that connects to the USB port should have a P/N that
122 will tell you what type of DMR you have. The UIA-10 type is not
123 supported at this time. This driver maps all buttons to keypress
124 events.
79 125
80 If unsure, say Y. 126 To compile this driver as a module, choose M here: the module will
127 be called keyspan_remote.
128
129config INPUT_POWERMATE
130 tristate "Griffin PowerMate and Contour Jog support"
131 select USB
132 help
133 Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
134 These are aluminum dials which can measure clockwise and anticlockwise
135 rotation. The dial also acts as a pushbutton. The base contains an LED
136 which can be instructed to pulse or to switch to a particular intensity.
137
138 You can download userspace tools from
139 <http://sowerbutts.com/powermate/>.
81 140
82 To compile this driver as a module, choose M here: the 141 To compile this driver as a module, choose M here: the
83 module will be called ixp4xx-beeper. 142 module will be called powermate.
143
144config INPUT_YEALINK
145 tristate "Yealink usb-p1k voip phone"
146 depends EXPERIMENTAL
147 select USB
148 help
149 Say Y here if you want to enable keyboard and LCD functions of the
150 Yealink usb-p1k usb phones. The audio part is enabled by the generic
151 usb sound driver, so you might want to enable that as well.
152
153 For information about how to use these additional functions, see
154 <file:Documentation/input/yealink.txt>.
155
156 To compile this driver as a module, choose M here: the module will be
157 called yealink.
84 158
85config INPUT_UINPUT 159config INPUT_UINPUT
86 tristate "User level driver support" 160 tristate "User level driver support"
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 21e3cca0d33e..8b2f7799e25c 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -8,9 +8,14 @@ obj-$(CONFIG_INPUT_POLLDEV) += input-polldev.o
8obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o 8obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
9obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o 9obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o
10obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o 10obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
11obj-$(CONFIG_INPUT_UINPUT) += uinput.o 11obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
12obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o 12obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
13obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o 13obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
14obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o 14obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o
15obj-$(CONFIG_INPUT_ATI_REMOTE) += ati_remote.o
16obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o
17obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
18obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
19obj-$(CONFIG_INPUT_YEALINK) += yealink.o
15obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o 20obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
16obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o 21obj-$(CONFIG_INPUT_UINPUT) += uinput.o
diff --git a/drivers/input/misc/ati_remote.c b/drivers/input/misc/ati_remote.c
new file mode 100644
index 000000000000..471aab206443
--- /dev/null
+++ b/drivers/input/misc/ati_remote.c
@@ -0,0 +1,862 @@
1/*
2 * USB ATI Remote support
3 *
4 * Version 2.2.0 Copyright (c) 2004 Torrey Hoffman <thoffman@arnor.net>
5 * Version 2.1.1 Copyright (c) 2002 Vladimir Dergachev
6 *
7 * This 2.2.0 version is a rewrite / cleanup of the 2.1.1 driver, including
8 * porting to the 2.6 kernel interfaces, along with other modification
9 * to better match the style of the existing usb/input drivers. However, the
10 * protocol and hardware handling is essentially unchanged from 2.1.1.
11 *
12 * The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by
13 * Vojtech Pavlik.
14 *
15 * Changes:
16 *
17 * Feb 2004: Torrey Hoffman <thoffman@arnor.net>
18 * Version 2.2.0
19 * Jun 2004: Torrey Hoffman <thoffman@arnor.net>
20 * Version 2.2.1
21 * Added key repeat support contributed by:
22 * Vincent Vanackere <vanackere@lif.univ-mrs.fr>
23 * Added support for the "Lola" remote contributed by:
24 * Seth Cohn <sethcohn@yahoo.com>
25 *
26 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
27 *
28 * This program is free software; you can redistribute it and/or modify
29 * it under the terms of the GNU General Public License as published by
30 * the Free Software Foundation; either version 2 of the License, or
31 * (at your option) any later version.
32 *
33 * This program is distributed in the hope that it will be useful,
34 * but WITHOUT ANY WARRANTY; without even the implied warranty of
35 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
36 * GNU General Public License for more details.
37 *
38 * You should have received a copy of the GNU General Public License
39 * along with this program; if not, write to the Free Software
40 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
41 *
42 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
43 *
44 * Hardware & software notes
45 *
46 * These remote controls are distributed by ATI as part of their
47 * "All-In-Wonder" video card packages. The receiver self-identifies as a
48 * "USB Receiver" with manufacturer "X10 Wireless Technology Inc".
49 *
50 * The "Lola" remote is available from X10. See:
51 * http://www.x10.com/products/lola_sg1.htm
52 * The Lola is similar to the ATI remote but has no mouse support, and slightly
53 * different keys.
54 *
55 * It is possible to use multiple receivers and remotes on multiple computers
56 * simultaneously by configuring them to use specific channels.
57 *
58 * The RF protocol used by the remote supports 16 distinct channels, 1 to 16.
59 * Actually, it may even support more, at least in some revisions of the
60 * hardware.
61 *
62 * Each remote can be configured to transmit on one channel as follows:
63 * - Press and hold the "hand icon" button.
64 * - When the red LED starts to blink, let go of the "hand icon" button.
65 * - When it stops blinking, input the channel code as two digits, from 01
66 * to 16, and press the hand icon again.
67 *
68 * The timing can be a little tricky. Try loading the module with debug=1
69 * to have the kernel print out messages about the remote control number
70 * and mask. Note: debugging prints remote numbers as zero-based hexadecimal.
71 *
72 * The driver has a "channel_mask" parameter. This bitmask specifies which
73 * channels will be ignored by the module. To mask out channels, just add
74 * all the 2^channel_number values together.
75 *
76 * For instance, set channel_mask = 2^4 = 16 (binary 10000) to make ati_remote
77 * ignore signals coming from remote controls transmitting on channel 4, but
78 * accept all other channels.
79 *
80 * Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be
81 * ignored.
82 *
83 * The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this
84 * parameter are unused.
85 *
86 */
87
88#include <linux/kernel.h>
89#include <linux/errno.h>
90#include <linux/init.h>
91#include <linux/slab.h>
92#include <linux/module.h>
93#include <linux/moduleparam.h>
94#include <linux/usb/input.h>
95#include <linux/wait.h>
96#include <linux/jiffies.h>
97
98/*
99 * Module and Version Information, Module Parameters
100 */
101
102#define ATI_REMOTE_VENDOR_ID 0x0bc7
103#define ATI_REMOTE_PRODUCT_ID 0x004
104#define LOLA_REMOTE_PRODUCT_ID 0x002
105#define MEDION_REMOTE_PRODUCT_ID 0x006
106
107#define DRIVER_VERSION "2.2.1"
108#define DRIVER_AUTHOR "Torrey Hoffman <thoffman@arnor.net>"
109#define DRIVER_DESC "ATI/X10 RF USB Remote Control"
110
111#define NAME_BUFSIZE 80 /* size of product name, path buffers */
112#define DATA_BUFSIZE 63 /* size of URB data buffers */
113
114/*
115 * Duplicate event filtering time.
116 * Sequential, identical KIND_FILTERED inputs with less than
117 * FILTER_TIME milliseconds between them are considered as repeat
118 * events. The hardware generates 5 events for the first keypress
119 * and we have to take this into account for an accurate repeat
120 * behaviour.
121 */
122#define FILTER_TIME 60 /* msec */
123#define REPEAT_DELAY 500 /* msec */
124
125static unsigned long channel_mask;
126module_param(channel_mask, ulong, 0644);
127MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore");
128
129static int debug;
130module_param(debug, int, 0644);
131MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
132
133static int repeat_filter = FILTER_TIME;
134module_param(repeat_filter, int, 0644);
135MODULE_PARM_DESC(repeat_filter, "Repeat filter time, default = 60 msec");
136
137static int repeat_delay = REPEAT_DELAY;
138module_param(repeat_delay, int, 0644);
139MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec");
140
141#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0)
142#undef err
143#define err(format, arg...) printk(KERN_ERR format , ## arg)
144
145static struct usb_device_id ati_remote_table[] = {
146 { USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) },
147 { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) },
148 { USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID) },
149 {} /* Terminating entry */
150};
151
152MODULE_DEVICE_TABLE(usb, ati_remote_table);
153
154/* Get hi and low bytes of a 16-bits int */
155#define HI(a) ((unsigned char)((a) >> 8))
156#define LO(a) ((unsigned char)((a) & 0xff))
157
158#define SEND_FLAG_IN_PROGRESS 1
159#define SEND_FLAG_COMPLETE 2
160
161/* Device initialization strings */
162static char init1[] = { 0x01, 0x00, 0x20, 0x14 };
163static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 };
164
165struct ati_remote {
166 struct input_dev *idev;
167 struct usb_device *udev;
168 struct usb_interface *interface;
169
170 struct urb *irq_urb;
171 struct urb *out_urb;
172 struct usb_endpoint_descriptor *endpoint_in;
173 struct usb_endpoint_descriptor *endpoint_out;
174 unsigned char *inbuf;
175 unsigned char *outbuf;
176 dma_addr_t inbuf_dma;
177 dma_addr_t outbuf_dma;
178
179 unsigned char old_data[2]; /* Detect duplicate events */
180 unsigned long old_jiffies;
181 unsigned long acc_jiffies; /* handle acceleration */
182 unsigned long first_jiffies;
183
184 unsigned int repeat_count;
185
186 char name[NAME_BUFSIZE];
187 char phys[NAME_BUFSIZE];
188
189 wait_queue_head_t wait;
190 int send_flags;
191};
192
193/* "Kinds" of messages sent from the hardware to the driver. */
194#define KIND_END 0
195#define KIND_LITERAL 1 /* Simply pass to input system */
196#define KIND_FILTERED 2 /* Add artificial key-up events, drop keyrepeats */
197#define KIND_LU 3 /* Directional keypad diagonals - left up, */
198#define KIND_RU 4 /* right up, */
199#define KIND_LD 5 /* left down, */
200#define KIND_RD 6 /* right down */
201#define KIND_ACCEL 7 /* Directional keypad - left, right, up, down.*/
202
203/* Translation table from hardware messages to input events. */
204static const struct {
205 short kind;
206 unsigned char data1, data2;
207 int type;
208 unsigned int code;
209 int value;
210} ati_remote_tbl[] = {
211 /* Directional control pad axes */
212 {KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */
213 {KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */
214 {KIND_ACCEL, 0x37, 0x72, EV_REL, REL_Y, -1}, /* up */
215 {KIND_ACCEL, 0x38, 0x73, EV_REL, REL_Y, 1}, /* down */
216 /* Directional control pad diagonals */
217 {KIND_LU, 0x39, 0x74, EV_REL, 0, 0}, /* left up */
218 {KIND_RU, 0x3a, 0x75, EV_REL, 0, 0}, /* right up */
219 {KIND_LD, 0x3c, 0x77, EV_REL, 0, 0}, /* left down */
220 {KIND_RD, 0x3b, 0x76, EV_REL, 0, 0}, /* right down */
221
222 /* "Mouse button" buttons */
223 {KIND_LITERAL, 0x3d, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */
224 {KIND_LITERAL, 0x3e, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */
225 {KIND_LITERAL, 0x41, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */
226 {KIND_LITERAL, 0x42, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */
227
228 /* Artificial "doubleclick" events are generated by the hardware.
229 * They are mapped to the "side" and "extra" mouse buttons here. */
230 {KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */
231 {KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */
232
233 /* keyboard. */
234 {KIND_FILTERED, 0xd2, 0x0d, EV_KEY, KEY_1, 1},
235 {KIND_FILTERED, 0xd3, 0x0e, EV_KEY, KEY_2, 1},
236 {KIND_FILTERED, 0xd4, 0x0f, EV_KEY, KEY_3, 1},
237 {KIND_FILTERED, 0xd5, 0x10, EV_KEY, KEY_4, 1},
238 {KIND_FILTERED, 0xd6, 0x11, EV_KEY, KEY_5, 1},
239 {KIND_FILTERED, 0xd7, 0x12, EV_KEY, KEY_6, 1},
240 {KIND_FILTERED, 0xd8, 0x13, EV_KEY, KEY_7, 1},
241 {KIND_FILTERED, 0xd9, 0x14, EV_KEY, KEY_8, 1},
242 {KIND_FILTERED, 0xda, 0x15, EV_KEY, KEY_9, 1},
243 {KIND_FILTERED, 0xdc, 0x17, EV_KEY, KEY_0, 1},
244 {KIND_FILTERED, 0xc5, 0x00, EV_KEY, KEY_A, 1},
245 {KIND_FILTERED, 0xc6, 0x01, EV_KEY, KEY_B, 1},
246 {KIND_FILTERED, 0xde, 0x19, EV_KEY, KEY_C, 1},
247 {KIND_FILTERED, 0xe0, 0x1b, EV_KEY, KEY_D, 1},
248 {KIND_FILTERED, 0xe6, 0x21, EV_KEY, KEY_E, 1},
249 {KIND_FILTERED, 0xe8, 0x23, EV_KEY, KEY_F, 1},
250
251 /* "special" keys */
252 {KIND_FILTERED, 0xdd, 0x18, EV_KEY, KEY_KPENTER, 1}, /* "check" */
253 {KIND_FILTERED, 0xdb, 0x16, EV_KEY, KEY_MENU, 1}, /* "menu" */
254 {KIND_FILTERED, 0xc7, 0x02, EV_KEY, KEY_POWER, 1}, /* Power */
255 {KIND_FILTERED, 0xc8, 0x03, EV_KEY, KEY_TV, 1}, /* TV */
256 {KIND_FILTERED, 0xc9, 0x04, EV_KEY, KEY_DVD, 1}, /* DVD */
257 {KIND_FILTERED, 0xca, 0x05, EV_KEY, KEY_WWW, 1}, /* WEB */
258 {KIND_FILTERED, 0xcb, 0x06, EV_KEY, KEY_BOOKMARKS, 1}, /* "book" */
259 {KIND_FILTERED, 0xcc, 0x07, EV_KEY, KEY_EDIT, 1}, /* "hand" */
260 {KIND_FILTERED, 0xe1, 0x1c, EV_KEY, KEY_COFFEE, 1}, /* "timer" */
261 {KIND_FILTERED, 0xe5, 0x20, EV_KEY, KEY_FRONT, 1}, /* "max" */
262 {KIND_FILTERED, 0xe2, 0x1d, EV_KEY, KEY_LEFT, 1}, /* left */
263 {KIND_FILTERED, 0xe4, 0x1f, EV_KEY, KEY_RIGHT, 1}, /* right */
264 {KIND_FILTERED, 0xe7, 0x22, EV_KEY, KEY_DOWN, 1}, /* down */
265 {KIND_FILTERED, 0xdf, 0x1a, EV_KEY, KEY_UP, 1}, /* up */
266 {KIND_FILTERED, 0xe3, 0x1e, EV_KEY, KEY_OK, 1}, /* "OK" */
267 {KIND_FILTERED, 0xce, 0x09, EV_KEY, KEY_VOLUMEDOWN, 1}, /* VOL + */
268 {KIND_FILTERED, 0xcd, 0x08, EV_KEY, KEY_VOLUMEUP, 1}, /* VOL - */
269 {KIND_FILTERED, 0xcf, 0x0a, EV_KEY, KEY_MUTE, 1}, /* MUTE */
270 {KIND_FILTERED, 0xd0, 0x0b, EV_KEY, KEY_CHANNELUP, 1}, /* CH + */
271 {KIND_FILTERED, 0xd1, 0x0c, EV_KEY, KEY_CHANNELDOWN, 1},/* CH - */
272 {KIND_FILTERED, 0xec, 0x27, EV_KEY, KEY_RECORD, 1}, /* ( o) red */
273 {KIND_FILTERED, 0xea, 0x25, EV_KEY, KEY_PLAY, 1}, /* ( >) */
274 {KIND_FILTERED, 0xe9, 0x24, EV_KEY, KEY_REWIND, 1}, /* (<<) */
275 {KIND_FILTERED, 0xeb, 0x26, EV_KEY, KEY_FORWARD, 1}, /* (>>) */
276 {KIND_FILTERED, 0xed, 0x28, EV_KEY, KEY_STOP, 1}, /* ([]) */
277 {KIND_FILTERED, 0xee, 0x29, EV_KEY, KEY_PAUSE, 1}, /* ('') */
278 {KIND_FILTERED, 0xf0, 0x2b, EV_KEY, KEY_PREVIOUS, 1}, /* (<-) */
279 {KIND_FILTERED, 0xef, 0x2a, EV_KEY, KEY_NEXT, 1}, /* (>+) */
280 {KIND_FILTERED, 0xf2, 0x2D, EV_KEY, KEY_INFO, 1}, /* PLAYING */
281 {KIND_FILTERED, 0xf3, 0x2E, EV_KEY, KEY_HOME, 1}, /* TOP */
282 {KIND_FILTERED, 0xf4, 0x2F, EV_KEY, KEY_END, 1}, /* END */
283 {KIND_FILTERED, 0xf5, 0x30, EV_KEY, KEY_SELECT, 1}, /* SELECT */
284
285 {KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0}
286};
287
288/* Local function prototypes */
289static void ati_remote_dump (unsigned char *data, unsigned int actual_length);
290static int ati_remote_open (struct input_dev *inputdev);
291static void ati_remote_close (struct input_dev *inputdev);
292static int ati_remote_sendpacket (struct ati_remote *ati_remote, u16 cmd, unsigned char *data);
293static void ati_remote_irq_out (struct urb *urb);
294static void ati_remote_irq_in (struct urb *urb);
295static void ati_remote_input_report (struct urb *urb);
296static int ati_remote_initialize (struct ati_remote *ati_remote);
297static int ati_remote_probe (struct usb_interface *interface, const struct usb_device_id *id);
298static void ati_remote_disconnect (struct usb_interface *interface);
299
300/* usb specific object to register with the usb subsystem */
301static struct usb_driver ati_remote_driver = {
302 .name = "ati_remote",
303 .probe = ati_remote_probe,
304 .disconnect = ati_remote_disconnect,
305 .id_table = ati_remote_table,
306};
307
308/*
309 * ati_remote_dump_input
310 */
311static void ati_remote_dump(unsigned char *data, unsigned int len)
312{
313 if ((len == 1) && (data[0] != (unsigned char)0xff) && (data[0] != 0x00))
314 warn("Weird byte 0x%02x", data[0]);
315 else if (len == 4)
316 warn("Weird key %02x %02x %02x %02x",
317 data[0], data[1], data[2], data[3]);
318 else
319 warn("Weird data, len=%d %02x %02x %02x %02x %02x %02x ...",
320 len, data[0], data[1], data[2], data[3], data[4], data[5]);
321}
322
323/*
324 * ati_remote_open
325 */
326static int ati_remote_open(struct input_dev *inputdev)
327{
328 struct ati_remote *ati_remote = input_get_drvdata(inputdev);
329
330 /* On first open, submit the read urb which was set up previously. */
331 ati_remote->irq_urb->dev = ati_remote->udev;
332 if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) {
333 dev_err(&ati_remote->interface->dev,
334 "%s: usb_submit_urb failed!\n", __FUNCTION__);
335 return -EIO;
336 }
337
338 return 0;
339}
340
341/*
342 * ati_remote_close
343 */
344static void ati_remote_close(struct input_dev *inputdev)
345{
346 struct ati_remote *ati_remote = input_get_drvdata(inputdev);
347
348 usb_kill_urb(ati_remote->irq_urb);
349}
350
351/*
352 * ati_remote_irq_out
353 */
354static void ati_remote_irq_out(struct urb *urb)
355{
356 struct ati_remote *ati_remote = urb->context;
357
358 if (urb->status) {
359 dev_dbg(&ati_remote->interface->dev, "%s: status %d\n",
360 __FUNCTION__, urb->status);
361 return;
362 }
363
364 ati_remote->send_flags |= SEND_FLAG_COMPLETE;
365 wmb();
366 wake_up(&ati_remote->wait);
367}
368
369/*
370 * ati_remote_sendpacket
371 *
372 * Used to send device initialization strings
373 */
374static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigned char *data)
375{
376 int retval = 0;
377
378 /* Set up out_urb */
379 memcpy(ati_remote->out_urb->transfer_buffer + 1, data, LO(cmd));
380 ((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd);
381
382 ati_remote->out_urb->transfer_buffer_length = LO(cmd) + 1;
383 ati_remote->out_urb->dev = ati_remote->udev;
384 ati_remote->send_flags = SEND_FLAG_IN_PROGRESS;
385
386 retval = usb_submit_urb(ati_remote->out_urb, GFP_ATOMIC);
387 if (retval) {
388 dev_dbg(&ati_remote->interface->dev,
389 "sendpacket: usb_submit_urb failed: %d\n", retval);
390 return retval;
391 }
392
393 wait_event_timeout(ati_remote->wait,
394 ((ati_remote->out_urb->status != -EINPROGRESS) ||
395 (ati_remote->send_flags & SEND_FLAG_COMPLETE)),
396 HZ);
397 usb_kill_urb(ati_remote->out_urb);
398
399 return retval;
400}
401
402/*
403 * ati_remote_event_lookup
404 */
405static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2)
406{
407 int i;
408
409 for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) {
410 /*
411 * Decide if the table entry matches the remote input.
412 */
413 if ((((ati_remote_tbl[i].data1 & 0x0f) == (d1 & 0x0f))) &&
414 ((((ati_remote_tbl[i].data1 >> 4) -
415 (d1 >> 4) + rem) & 0x0f) == 0x0f) &&
416 (ati_remote_tbl[i].data2 == d2))
417 return i;
418
419 }
420 return -1;
421}
422
423/*
424 * ati_remote_compute_accel
425 *
426 * Implements acceleration curve for directional control pad
427 * If elapsed time since last event is > 1/4 second, user "stopped",
428 * so reset acceleration. Otherwise, user is probably holding the control
429 * pad down, so we increase acceleration, ramping up over two seconds to
430 * a maximum speed.
431 */
432static int ati_remote_compute_accel(struct ati_remote *ati_remote)
433{
434 static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 };
435 unsigned long now = jiffies;
436 int acc;
437
438 if (time_after(now, ati_remote->old_jiffies + msecs_to_jiffies(250))) {
439 acc = 1;
440 ati_remote->acc_jiffies = now;
441 }
442 else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(125)))
443 acc = accel[0];
444 else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(250)))
445 acc = accel[1];
446 else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(500)))
447 acc = accel[2];
448 else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1000)))
449 acc = accel[3];
450 else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1500)))
451 acc = accel[4];
452 else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(2000)))
453 acc = accel[5];
454 else
455 acc = accel[6];
456
457 return acc;
458}
459
460/*
461 * ati_remote_report_input
462 */
463static void ati_remote_input_report(struct urb *urb)
464{
465 struct ati_remote *ati_remote = urb->context;
466 unsigned char *data= ati_remote->inbuf;
467 struct input_dev *dev = ati_remote->idev;
468 int index, acc;
469 int remote_num;
470
471 /* Deal with strange looking inputs */
472 if ( (urb->actual_length != 4) || (data[0] != 0x14) ||
473 ((data[3] & 0x0f) != 0x00) ) {
474 ati_remote_dump(data, urb->actual_length);
475 return;
476 }
477
478 /* Mask unwanted remote channels. */
479 /* note: remote_num is 0-based, channel 1 on remote == 0 here */
480 remote_num = (data[3] >> 4) & 0x0f;
481 if (channel_mask & (1 << (remote_num + 1))) {
482 dbginfo(&ati_remote->interface->dev,
483 "Masked input from channel 0x%02x: data %02x,%02x, mask= 0x%02lx\n",
484 remote_num, data[1], data[2], channel_mask);
485 return;
486 }
487
488 /* Look up event code index in translation table */
489 index = ati_remote_event_lookup(remote_num, data[1], data[2]);
490 if (index < 0) {
491 dev_warn(&ati_remote->interface->dev,
492 "Unknown input from channel 0x%02x: data %02x,%02x\n",
493 remote_num, data[1], data[2]);
494 return;
495 }
496 dbginfo(&ati_remote->interface->dev,
497 "channel 0x%02x; data %02x,%02x; index %d; keycode %d\n",
498 remote_num, data[1], data[2], index, ati_remote_tbl[index].code);
499
500 if (ati_remote_tbl[index].kind == KIND_LITERAL) {
501 input_event(dev, ati_remote_tbl[index].type,
502 ati_remote_tbl[index].code,
503 ati_remote_tbl[index].value);
504 input_sync(dev);
505
506 ati_remote->old_jiffies = jiffies;
507 return;
508 }
509
510 if (ati_remote_tbl[index].kind == KIND_FILTERED) {
511 unsigned long now = jiffies;
512
513 /* Filter duplicate events which happen "too close" together. */
514 if (ati_remote->old_data[0] == data[1] &&
515 ati_remote->old_data[1] == data[2] &&
516 time_before(now, ati_remote->old_jiffies +
517 msecs_to_jiffies(repeat_filter))) {
518 ati_remote->repeat_count++;
519 } else {
520 ati_remote->repeat_count = 0;
521 ati_remote->first_jiffies = now;
522 }
523
524 ati_remote->old_data[0] = data[1];
525 ati_remote->old_data[1] = data[2];
526 ati_remote->old_jiffies = now;
527
528 /* Ensure we skip at least the 4 first duplicate events (generated
529 * by a single keypress), and continue skipping until repeat_delay
530 * msecs have passed
531 */
532 if (ati_remote->repeat_count > 0 &&
533 (ati_remote->repeat_count < 5 ||
534 time_before(now, ati_remote->first_jiffies +
535 msecs_to_jiffies(repeat_delay))))
536 return;
537
538
539 input_event(dev, ati_remote_tbl[index].type,
540 ati_remote_tbl[index].code, 1);
541 input_sync(dev);
542 input_event(dev, ati_remote_tbl[index].type,
543 ati_remote_tbl[index].code, 0);
544 input_sync(dev);
545
546 } else {
547
548 /*
549 * Other event kinds are from the directional control pad, and have an
550 * acceleration factor applied to them. Without this acceleration, the
551 * control pad is mostly unusable.
552 */
553 acc = ati_remote_compute_accel(ati_remote);
554
555 switch (ati_remote_tbl[index].kind) {
556 case KIND_ACCEL:
557 input_event(dev, ati_remote_tbl[index].type,
558 ati_remote_tbl[index].code,
559 ati_remote_tbl[index].value * acc);
560 break;
561 case KIND_LU:
562 input_report_rel(dev, REL_X, -acc);
563 input_report_rel(dev, REL_Y, -acc);
564 break;
565 case KIND_RU:
566 input_report_rel(dev, REL_X, acc);
567 input_report_rel(dev, REL_Y, -acc);
568 break;
569 case KIND_LD:
570 input_report_rel(dev, REL_X, -acc);
571 input_report_rel(dev, REL_Y, acc);
572 break;
573 case KIND_RD:
574 input_report_rel(dev, REL_X, acc);
575 input_report_rel(dev, REL_Y, acc);
576 break;
577 default:
578 dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n",
579 ati_remote_tbl[index].kind);
580 }
581 input_sync(dev);
582
583 ati_remote->old_jiffies = jiffies;
584 ati_remote->old_data[0] = data[1];
585 ati_remote->old_data[1] = data[2];
586 }
587}
588
589/*
590 * ati_remote_irq_in
591 */
592static void ati_remote_irq_in(struct urb *urb)
593{
594 struct ati_remote *ati_remote = urb->context;
595 int retval;
596
597 switch (urb->status) {
598 case 0: /* success */
599 ati_remote_input_report(urb);
600 break;
601 case -ECONNRESET: /* unlink */
602 case -ENOENT:
603 case -ESHUTDOWN:
604 dev_dbg(&ati_remote->interface->dev, "%s: urb error status, unlink? \n",
605 __FUNCTION__);
606 return;
607 default: /* error */
608 dev_dbg(&ati_remote->interface->dev, "%s: Nonzero urb status %d\n",
609 __FUNCTION__, urb->status);
610 }
611
612 retval = usb_submit_urb(urb, GFP_ATOMIC);
613 if (retval)
614 dev_err(&ati_remote->interface->dev, "%s: usb_submit_urb()=%d\n",
615 __FUNCTION__, retval);
616}
617
618/*
619 * ati_remote_alloc_buffers
620 */
621static int ati_remote_alloc_buffers(struct usb_device *udev,
622 struct ati_remote *ati_remote)
623{
624 ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, GFP_ATOMIC,
625 &ati_remote->inbuf_dma);
626 if (!ati_remote->inbuf)
627 return -1;
628
629 ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, GFP_ATOMIC,
630 &ati_remote->outbuf_dma);
631 if (!ati_remote->outbuf)
632 return -1;
633
634 ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
635 if (!ati_remote->irq_urb)
636 return -1;
637
638 ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL);
639 if (!ati_remote->out_urb)
640 return -1;
641
642 return 0;
643}
644
645/*
646 * ati_remote_free_buffers
647 */
648static void ati_remote_free_buffers(struct ati_remote *ati_remote)
649{
650 usb_free_urb(ati_remote->irq_urb);
651 usb_free_urb(ati_remote->out_urb);
652
653 usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
654 ati_remote->inbuf, ati_remote->inbuf_dma);
655
656 usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
657 ati_remote->outbuf, ati_remote->outbuf_dma);
658}
659
660static void ati_remote_input_init(struct ati_remote *ati_remote)
661{
662 struct input_dev *idev = ati_remote->idev;
663 int i;
664
665 idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
666 idev->keybit[LONG(BTN_MOUSE)] = ( BIT(BTN_LEFT) | BIT(BTN_RIGHT) |
667 BIT(BTN_SIDE) | BIT(BTN_EXTRA) );
668 idev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
669 for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++)
670 if (ati_remote_tbl[i].type == EV_KEY)
671 set_bit(ati_remote_tbl[i].code, idev->keybit);
672
673 input_set_drvdata(idev, ati_remote);
674
675 idev->open = ati_remote_open;
676 idev->close = ati_remote_close;
677
678 idev->name = ati_remote->name;
679 idev->phys = ati_remote->phys;
680
681 usb_to_input_id(ati_remote->udev, &idev->id);
682 idev->dev.parent = &ati_remote->udev->dev;
683}
684
685static int ati_remote_initialize(struct ati_remote *ati_remote)
686{
687 struct usb_device *udev = ati_remote->udev;
688 int pipe, maxp;
689
690 init_waitqueue_head(&ati_remote->wait);
691
692 /* Set up irq_urb */
693 pipe = usb_rcvintpipe(udev, ati_remote->endpoint_in->bEndpointAddress);
694 maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
695 maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp;
696
697 usb_fill_int_urb(ati_remote->irq_urb, udev, pipe, ati_remote->inbuf,
698 maxp, ati_remote_irq_in, ati_remote,
699 ati_remote->endpoint_in->bInterval);
700 ati_remote->irq_urb->transfer_dma = ati_remote->inbuf_dma;
701 ati_remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
702
703 /* Set up out_urb */
704 pipe = usb_sndintpipe(udev, ati_remote->endpoint_out->bEndpointAddress);
705 maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
706 maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp;
707
708 usb_fill_int_urb(ati_remote->out_urb, udev, pipe, ati_remote->outbuf,
709 maxp, ati_remote_irq_out, ati_remote,
710 ati_remote->endpoint_out->bInterval);
711 ati_remote->out_urb->transfer_dma = ati_remote->outbuf_dma;
712 ati_remote->out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
713
714 /* send initialization strings */
715 if ((ati_remote_sendpacket(ati_remote, 0x8004, init1)) ||
716 (ati_remote_sendpacket(ati_remote, 0x8007, init2))) {
717 dev_err(&ati_remote->interface->dev,
718 "Initializing ati_remote hardware failed.\n");
719 return -EIO;
720 }
721
722 return 0;
723}
724
725/*
726 * ati_remote_probe
727 */
728static int ati_remote_probe(struct usb_interface *interface, const struct usb_device_id *id)
729{
730 struct usb_device *udev = interface_to_usbdev(interface);
731 struct usb_host_interface *iface_host = interface->cur_altsetting;
732 struct usb_endpoint_descriptor *endpoint_in, *endpoint_out;
733 struct ati_remote *ati_remote;
734 struct input_dev *input_dev;
735 int err = -ENOMEM;
736
737 if (iface_host->desc.bNumEndpoints != 2) {
738 err("%s: Unexpected desc.bNumEndpoints\n", __FUNCTION__);
739 return -ENODEV;
740 }
741
742 endpoint_in = &iface_host->endpoint[0].desc;
743 endpoint_out = &iface_host->endpoint[1].desc;
744
745 if (!usb_endpoint_is_int_in(endpoint_in)) {
746 err("%s: Unexpected endpoint_in\n", __FUNCTION__);
747 return -ENODEV;
748 }
749 if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) {
750 err("%s: endpoint_in message size==0? \n", __FUNCTION__);
751 return -ENODEV;
752 }
753
754 ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL);
755 input_dev = input_allocate_device();
756 if (!ati_remote || !input_dev)
757 goto fail1;
758
759 /* Allocate URB buffers, URBs */
760 if (ati_remote_alloc_buffers(udev, ati_remote))
761 goto fail2;
762
763 ati_remote->endpoint_in = endpoint_in;
764 ati_remote->endpoint_out = endpoint_out;
765 ati_remote->udev = udev;
766 ati_remote->idev = input_dev;
767 ati_remote->interface = interface;
768
769 usb_make_path(udev, ati_remote->phys, sizeof(ati_remote->phys));
770 strlcpy(ati_remote->phys, "/input0", sizeof(ati_remote->phys));
771
772 if (udev->manufacturer)
773 strlcpy(ati_remote->name, udev->manufacturer, sizeof(ati_remote->name));
774
775 if (udev->product)
776 snprintf(ati_remote->name, sizeof(ati_remote->name),
777 "%s %s", ati_remote->name, udev->product);
778
779 if (!strlen(ati_remote->name))
780 snprintf(ati_remote->name, sizeof(ati_remote->name),
781 DRIVER_DESC "(%04x,%04x)",
782 le16_to_cpu(ati_remote->udev->descriptor.idVendor),
783 le16_to_cpu(ati_remote->udev->descriptor.idProduct));
784
785 ati_remote_input_init(ati_remote);
786
787 /* Device Hardware Initialization - fills in ati_remote->idev from udev. */
788 err = ati_remote_initialize(ati_remote);
789 if (err)
790 goto fail3;
791
792 /* Set up and register input device */
793 err = input_register_device(ati_remote->idev);
794 if (err)
795 goto fail3;
796
797 usb_set_intfdata(interface, ati_remote);
798 return 0;
799
800 fail3: usb_kill_urb(ati_remote->irq_urb);
801 usb_kill_urb(ati_remote->out_urb);
802 fail2: ati_remote_free_buffers(ati_remote);
803 fail1: input_free_device(input_dev);
804 kfree(ati_remote);
805 return err;
806}
807
808/*
809 * ati_remote_disconnect
810 */
811static void ati_remote_disconnect(struct usb_interface *interface)
812{
813 struct ati_remote *ati_remote;
814
815 ati_remote = usb_get_intfdata(interface);
816 usb_set_intfdata(interface, NULL);
817 if (!ati_remote) {
818 warn("%s - null device?\n", __FUNCTION__);
819 return;
820 }
821
822 usb_kill_urb(ati_remote->irq_urb);
823 usb_kill_urb(ati_remote->out_urb);
824 input_unregister_device(ati_remote->idev);
825 ati_remote_free_buffers(ati_remote);
826 kfree(ati_remote);
827}
828
829/*
830 * ati_remote_init
831 */
832static int __init ati_remote_init(void)
833{
834 int result;
835
836 result = usb_register(&ati_remote_driver);
837 if (result)
838 err("usb_register error #%d\n", result);
839 else
840 info("Registered USB driver " DRIVER_DESC " v. " DRIVER_VERSION);
841
842 return result;
843}
844
845/*
846 * ati_remote_exit
847 */
848static void __exit ati_remote_exit(void)
849{
850 usb_deregister(&ati_remote_driver);
851}
852
853/*
854 * module specification
855 */
856
857module_init(ati_remote_init);
858module_exit(ati_remote_exit);
859
860MODULE_AUTHOR(DRIVER_AUTHOR);
861MODULE_DESCRIPTION(DRIVER_DESC);
862MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c
new file mode 100644
index 000000000000..1031543e5c3f
--- /dev/null
+++ b/drivers/input/misc/ati_remote2.c
@@ -0,0 +1,543 @@
1/*
2 * ati_remote2 - ATI/Philips USB RF remote driver
3 *
4 * Copyright (C) 2005 Ville Syrjala <syrjala@sci.fi>
5 * Copyright (C) 2007 Peter Stokes <linux@dadeos.freeserve.co.uk>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2
9 * as published by the Free Software Foundation.
10 */
11
12#include <linux/usb/input.h>
13
14#define DRIVER_DESC "ATI/Philips USB RF remote driver"
15#define DRIVER_VERSION "0.2"
16
17MODULE_DESCRIPTION(DRIVER_DESC);
18MODULE_VERSION(DRIVER_VERSION);
19MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
20MODULE_LICENSE("GPL");
21
22/*
23 * ATI Remote Wonder II Channel Configuration
24 *
25 * The remote control can by assigned one of sixteen "channels" in order to facilitate
26 * the use of multiple remote controls within range of each other.
27 * A remote's "channel" may be altered by pressing and holding the "PC" button for
28 * approximately 3 seconds, after which the button will slowly flash the count of the
29 * currently configured "channel", using the numeric keypad enter a number between 1 and
30 * 16 and then the "PC" button again, the button will slowly flash the count of the
31 * newly configured "channel".
32 */
33
34static unsigned int channel_mask = 0xFFFF;
35module_param(channel_mask, uint, 0644);
36MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>");
37
38static unsigned int mode_mask = 0x1F;
39module_param(mode_mask, uint, 0644);
40MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>");
41
42static struct usb_device_id ati_remote2_id_table[] = {
43 { USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */
44 { }
45};
46MODULE_DEVICE_TABLE(usb, ati_remote2_id_table);
47
48static struct {
49 int hw_code;
50 int key_code;
51} ati_remote2_key_table[] = {
52 { 0x00, KEY_0 },
53 { 0x01, KEY_1 },
54 { 0x02, KEY_2 },
55 { 0x03, KEY_3 },
56 { 0x04, KEY_4 },
57 { 0x05, KEY_5 },
58 { 0x06, KEY_6 },
59 { 0x07, KEY_7 },
60 { 0x08, KEY_8 },
61 { 0x09, KEY_9 },
62 { 0x0c, KEY_POWER },
63 { 0x0d, KEY_MUTE },
64 { 0x10, KEY_VOLUMEUP },
65 { 0x11, KEY_VOLUMEDOWN },
66 { 0x20, KEY_CHANNELUP },
67 { 0x21, KEY_CHANNELDOWN },
68 { 0x28, KEY_FORWARD },
69 { 0x29, KEY_REWIND },
70 { 0x2c, KEY_PLAY },
71 { 0x30, KEY_PAUSE },
72 { 0x31, KEY_STOP },
73 { 0x37, KEY_RECORD },
74 { 0x38, KEY_DVD },
75 { 0x39, KEY_TV },
76 { 0x54, KEY_MENU },
77 { 0x58, KEY_UP },
78 { 0x59, KEY_DOWN },
79 { 0x5a, KEY_LEFT },
80 { 0x5b, KEY_RIGHT },
81 { 0x5c, KEY_OK },
82 { 0x78, KEY_A },
83 { 0x79, KEY_B },
84 { 0x7a, KEY_C },
85 { 0x7b, KEY_D },
86 { 0x7c, KEY_E },
87 { 0x7d, KEY_F },
88 { 0x82, KEY_ENTER },
89 { 0x8e, KEY_VENDOR },
90 { 0x96, KEY_COFFEE },
91 { 0xa9, BTN_LEFT },
92 { 0xaa, BTN_RIGHT },
93 { 0xbe, KEY_QUESTION },
94 { 0xd5, KEY_FRONT },
95 { 0xd0, KEY_EDIT },
96 { 0xf9, KEY_INFO },
97 { (0x00 << 8) | 0x3f, KEY_PROG1 },
98 { (0x01 << 8) | 0x3f, KEY_PROG2 },
99 { (0x02 << 8) | 0x3f, KEY_PROG3 },
100 { (0x03 << 8) | 0x3f, KEY_PROG4 },
101 { (0x04 << 8) | 0x3f, KEY_PC },
102 { 0, KEY_RESERVED }
103};
104
105struct ati_remote2 {
106 struct input_dev *idev;
107 struct usb_device *udev;
108
109 struct usb_interface *intf[2];
110 struct usb_endpoint_descriptor *ep[2];
111 struct urb *urb[2];
112 void *buf[2];
113 dma_addr_t buf_dma[2];
114
115 unsigned long jiffies;
116 int mode;
117
118 char name[64];
119 char phys[64];
120};
121
122static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id);
123static void ati_remote2_disconnect(struct usb_interface *interface);
124
125static struct usb_driver ati_remote2_driver = {
126 .name = "ati_remote2",
127 .probe = ati_remote2_probe,
128 .disconnect = ati_remote2_disconnect,
129 .id_table = ati_remote2_id_table,
130};
131
132static int ati_remote2_open(struct input_dev *idev)
133{
134 struct ati_remote2 *ar2 = input_get_drvdata(idev);
135 int r;
136
137 r = usb_submit_urb(ar2->urb[0], GFP_KERNEL);
138 if (r) {
139 dev_err(&ar2->intf[0]->dev,
140 "%s: usb_submit_urb() = %d\n", __FUNCTION__, r);
141 return r;
142 }
143 r = usb_submit_urb(ar2->urb[1], GFP_KERNEL);
144 if (r) {
145 usb_kill_urb(ar2->urb[0]);
146 dev_err(&ar2->intf[1]->dev,
147 "%s: usb_submit_urb() = %d\n", __FUNCTION__, r);
148 return r;
149 }
150
151 return 0;
152}
153
154static void ati_remote2_close(struct input_dev *idev)
155{
156 struct ati_remote2 *ar2 = input_get_drvdata(idev);
157
158 usb_kill_urb(ar2->urb[0]);
159 usb_kill_urb(ar2->urb[1]);
160}
161
162static void ati_remote2_input_mouse(struct ati_remote2 *ar2)
163{
164 struct input_dev *idev = ar2->idev;
165 u8 *data = ar2->buf[0];
166 int channel, mode;
167
168 channel = data[0] >> 4;
169
170 if (!((1 << channel) & channel_mask))
171 return;
172
173 mode = data[0] & 0x0F;
174
175 if (mode > 4) {
176 dev_err(&ar2->intf[0]->dev,
177 "Unknown mode byte (%02x %02x %02x %02x)\n",
178 data[3], data[2], data[1], data[0]);
179 return;
180 }
181
182 if (!((1 << mode) & mode_mask))
183 return;
184
185 input_event(idev, EV_REL, REL_X, (s8) data[1]);
186 input_event(idev, EV_REL, REL_Y, (s8) data[2]);
187 input_sync(idev);
188}
189
190static int ati_remote2_lookup(unsigned int hw_code)
191{
192 int i;
193
194 for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
195 if (ati_remote2_key_table[i].hw_code == hw_code)
196 return i;
197
198 return -1;
199}
200
201static void ati_remote2_input_key(struct ati_remote2 *ar2)
202{
203 struct input_dev *idev = ar2->idev;
204 u8 *data = ar2->buf[1];
205 int channel, mode, hw_code, index;
206
207 channel = data[0] >> 4;
208
209 if (!((1 << channel) & channel_mask))
210 return;
211
212 mode = data[0] & 0x0F;
213
214 if (mode > 4) {
215 dev_err(&ar2->intf[1]->dev,
216 "Unknown mode byte (%02x %02x %02x %02x)\n",
217 data[3], data[2], data[1], data[0]);
218 return;
219 }
220
221 hw_code = data[2];
222 /*
223 * Mode keys (AUX1-AUX4, PC) all generate the same code byte.
224 * Use the mode byte to figure out which one was pressed.
225 */
226 if (hw_code == 0x3f) {
227 /*
228 * For some incomprehensible reason the mouse pad generates
229 * events which look identical to the events from the last
230 * pressed mode key. Naturally we don't want to generate key
231 * events for the mouse pad so we filter out any subsequent
232 * events from the same mode key.
233 */
234 if (ar2->mode == mode)
235 return;
236
237 if (data[1] == 0)
238 ar2->mode = mode;
239
240 hw_code |= mode << 8;
241 }
242
243 if (!((1 << mode) & mode_mask))
244 return;
245
246 index = ati_remote2_lookup(hw_code);
247 if (index < 0) {
248 dev_err(&ar2->intf[1]->dev,
249 "Unknown code byte (%02x %02x %02x %02x)\n",
250 data[3], data[2], data[1], data[0]);
251 return;
252 }
253
254 switch (data[1]) {
255 case 0: /* release */
256 break;
257 case 1: /* press */
258 ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]);
259 break;
260 case 2: /* repeat */
261
262 /* No repeat for mouse buttons. */
263 if (ati_remote2_key_table[index].key_code == BTN_LEFT ||
264 ati_remote2_key_table[index].key_code == BTN_RIGHT)
265 return;
266
267 if (!time_after_eq(jiffies, ar2->jiffies))
268 return;
269
270 ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]);
271 break;
272 default:
273 dev_err(&ar2->intf[1]->dev,
274 "Unknown state byte (%02x %02x %02x %02x)\n",
275 data[3], data[2], data[1], data[0]);
276 return;
277 }
278
279 input_event(idev, EV_KEY, ati_remote2_key_table[index].key_code, data[1]);
280 input_sync(idev);
281}
282
283static void ati_remote2_complete_mouse(struct urb *urb)
284{
285 struct ati_remote2 *ar2 = urb->context;
286 int r;
287
288 switch (urb->status) {
289 case 0:
290 ati_remote2_input_mouse(ar2);
291 break;
292 case -ENOENT:
293 case -EILSEQ:
294 case -ECONNRESET:
295 case -ESHUTDOWN:
296 dev_dbg(&ar2->intf[0]->dev,
297 "%s(): urb status = %d\n", __FUNCTION__, urb->status);
298 return;
299 default:
300 dev_err(&ar2->intf[0]->dev,
301 "%s(): urb status = %d\n", __FUNCTION__, urb->status);
302 }
303
304 r = usb_submit_urb(urb, GFP_ATOMIC);
305 if (r)
306 dev_err(&ar2->intf[0]->dev,
307 "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r);
308}
309
310static void ati_remote2_complete_key(struct urb *urb)
311{
312 struct ati_remote2 *ar2 = urb->context;
313 int r;
314
315 switch (urb->status) {
316 case 0:
317 ati_remote2_input_key(ar2);
318 break;
319 case -ENOENT:
320 case -EILSEQ:
321 case -ECONNRESET:
322 case -ESHUTDOWN:
323 dev_dbg(&ar2->intf[1]->dev,
324 "%s(): urb status = %d\n", __FUNCTION__, urb->status);
325 return;
326 default:
327 dev_err(&ar2->intf[1]->dev,
328 "%s(): urb status = %d\n", __FUNCTION__, urb->status);
329 }
330
331 r = usb_submit_urb(urb, GFP_ATOMIC);
332 if (r)
333 dev_err(&ar2->intf[1]->dev,
334 "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r);
335}
336
337static int ati_remote2_input_init(struct ati_remote2 *ar2)
338{
339 struct input_dev *idev;
340 int i, retval;
341
342 idev = input_allocate_device();
343 if (!idev)
344 return -ENOMEM;
345
346 ar2->idev = idev;
347 input_set_drvdata(idev, ar2);
348
349 idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_REL);
350 idev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT);
351 idev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
352 for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
353 set_bit(ati_remote2_key_table[i].key_code, idev->keybit);
354
355 idev->rep[REP_DELAY] = 250;
356 idev->rep[REP_PERIOD] = 33;
357
358 idev->open = ati_remote2_open;
359 idev->close = ati_remote2_close;
360
361 idev->name = ar2->name;
362 idev->phys = ar2->phys;
363
364 usb_to_input_id(ar2->udev, &idev->id);
365 idev->dev.parent = &ar2->udev->dev;
366
367 retval = input_register_device(idev);
368 if (retval)
369 input_free_device(idev);
370
371 return retval;
372}
373
374static int ati_remote2_urb_init(struct ati_remote2 *ar2)
375{
376 struct usb_device *udev = ar2->udev;
377 int i, pipe, maxp;
378
379 for (i = 0; i < 2; i++) {
380 ar2->buf[i] = usb_buffer_alloc(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]);
381 if (!ar2->buf[i])
382 return -ENOMEM;
383
384 ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL);
385 if (!ar2->urb[i])
386 return -ENOMEM;
387
388 pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress);
389 maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
390 maxp = maxp > 4 ? 4 : maxp;
391
392 usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp,
393 i ? ati_remote2_complete_key : ati_remote2_complete_mouse,
394 ar2, ar2->ep[i]->bInterval);
395 ar2->urb[i]->transfer_dma = ar2->buf_dma[i];
396 ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
397 }
398
399 return 0;
400}
401
402static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2)
403{
404 int i;
405
406 for (i = 0; i < 2; i++) {
407 usb_free_urb(ar2->urb[i]);
408 usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
409 }
410}
411
412static int ati_remote2_setup(struct ati_remote2 *ar2)
413{
414 int r, i, channel;
415
416 /*
417 * Configure receiver to only accept input from remote "channel"
418 * channel == 0 -> Accept input from any remote channel
419 * channel == 1 -> Only accept input from remote channel 1
420 * channel == 2 -> Only accept input from remote channel 2
421 * ...
422 * channel == 16 -> Only accept input from remote channel 16
423 */
424
425 channel = 0;
426 for (i = 0; i < 16; i++) {
427 if ((1 << i) & channel_mask) {
428 if (!(~(1 << i) & 0xFFFF & channel_mask))
429 channel = i + 1;
430 break;
431 }
432 }
433
434 r = usb_control_msg(ar2->udev, usb_sndctrlpipe(ar2->udev, 0),
435 0x20,
436 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
437 channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT);
438 if (r) {
439 dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n",
440 __FUNCTION__, r);
441 return r;
442 }
443
444 return 0;
445}
446
447static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id)
448{
449 struct usb_device *udev = interface_to_usbdev(interface);
450 struct usb_host_interface *alt = interface->cur_altsetting;
451 struct ati_remote2 *ar2;
452 int r;
453
454 if (alt->desc.bInterfaceNumber)
455 return -ENODEV;
456
457 ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL);
458 if (!ar2)
459 return -ENOMEM;
460
461 ar2->udev = udev;
462
463 ar2->intf[0] = interface;
464 ar2->ep[0] = &alt->endpoint[0].desc;
465
466 ar2->intf[1] = usb_ifnum_to_if(udev, 1);
467 r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2);
468 if (r)
469 goto fail1;
470 alt = ar2->intf[1]->cur_altsetting;
471 ar2->ep[1] = &alt->endpoint[0].desc;
472
473 r = ati_remote2_urb_init(ar2);
474 if (r)
475 goto fail2;
476
477 r = ati_remote2_setup(ar2);
478 if (r)
479 goto fail2;
480
481 usb_make_path(udev, ar2->phys, sizeof(ar2->phys));
482 strlcat(ar2->phys, "/input0", sizeof(ar2->phys));
483
484 strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name));
485
486 r = ati_remote2_input_init(ar2);
487 if (r)
488 goto fail2;
489
490 usb_set_intfdata(interface, ar2);
491
492 return 0;
493
494 fail2:
495 ati_remote2_urb_cleanup(ar2);
496
497 usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
498 fail1:
499 kfree(ar2);
500
501 return r;
502}
503
504static void ati_remote2_disconnect(struct usb_interface *interface)
505{
506 struct ati_remote2 *ar2;
507 struct usb_host_interface *alt = interface->cur_altsetting;
508
509 if (alt->desc.bInterfaceNumber)
510 return;
511
512 ar2 = usb_get_intfdata(interface);
513 usb_set_intfdata(interface, NULL);
514
515 input_unregister_device(ar2->idev);
516
517 ati_remote2_urb_cleanup(ar2);
518
519 usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
520
521 kfree(ar2);
522}
523
524static int __init ati_remote2_init(void)
525{
526 int r;
527
528 r = usb_register(&ati_remote2_driver);
529 if (r)
530 printk(KERN_ERR "ati_remote2: usb_register() = %d\n", r);
531 else
532 printk(KERN_INFO "ati_remote2: " DRIVER_DESC " " DRIVER_VERSION "\n");
533
534 return r;
535}
536
537static void __exit ati_remote2_exit(void)
538{
539 usb_deregister(&ati_remote2_driver);
540}
541
542module_init(ati_remote2_init);
543module_exit(ati_remote2_exit);
diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c
new file mode 100644
index 000000000000..1bffc9fa98c2
--- /dev/null
+++ b/drivers/input/misc/keyspan_remote.c
@@ -0,0 +1,592 @@
1/*
2 * keyspan_remote: USB driver for the Keyspan DMR
3 *
4 * Copyright (C) 2005 Zymeta Corporation - Michael Downey (downey@zymeta.com)
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License as
8 * published by the Free Software Foundation, version 2.
9 *
10 * This driver has been put together with the support of Innosys, Inc.
11 * and Keyspan, Inc the manufacturers of the Keyspan USB DMR product.
12 */
13
14#include <linux/kernel.h>
15#include <linux/errno.h>
16#include <linux/init.h>
17#include <linux/slab.h>
18#include <linux/module.h>
19#include <linux/moduleparam.h>
20#include <linux/usb/input.h>
21
22#define DRIVER_VERSION "v0.1"
23#define DRIVER_AUTHOR "Michael Downey <downey@zymeta.com>"
24#define DRIVER_DESC "Driver for the USB Keyspan remote control."
25#define DRIVER_LICENSE "GPL"
26
27/* Parameters that can be passed to the driver. */
28static int debug;
29module_param(debug, int, 0444);
30MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
31
32/* Vendor and product ids */
33#define USB_KEYSPAN_VENDOR_ID 0x06CD
34#define USB_KEYSPAN_PRODUCT_UIA11 0x0202
35
36/* Defines for converting the data from the remote. */
37#define ZERO 0x18
38#define ZERO_MASK 0x1F /* 5 bits for a 0 */
39#define ONE 0x3C
40#define ONE_MASK 0x3F /* 6 bits for a 1 */
41#define SYNC 0x3F80
42#define SYNC_MASK 0x3FFF /* 14 bits for a SYNC sequence */
43#define STOP 0x00
44#define STOP_MASK 0x1F /* 5 bits for the STOP sequence */
45#define GAP 0xFF
46
47#define RECV_SIZE 8 /* The UIA-11 type have a 8 byte limit. */
48
49/* table of devices that work with this driver */
50static struct usb_device_id keyspan_table[] = {
51 { USB_DEVICE(USB_KEYSPAN_VENDOR_ID, USB_KEYSPAN_PRODUCT_UIA11) },
52 { } /* Terminating entry */
53};
54
55/* Structure to store all the real stuff that a remote sends to us. */
56struct keyspan_message {
57 u16 system;
58 u8 button;
59 u8 toggle;
60};
61
62/* Structure used for all the bit testing magic needed to be done. */
63struct bit_tester {
64 u32 tester;
65 int len;
66 int pos;
67 int bits_left;
68 u8 buffer[32];
69};
70
71/* Structure to hold all of our driver specific stuff */
72struct usb_keyspan {
73 char name[128];
74 char phys[64];
75 struct usb_device* udev;
76 struct input_dev *input;
77 struct usb_interface* interface;
78 struct usb_endpoint_descriptor* in_endpoint;
79 struct urb* irq_urb;
80 int open;
81 dma_addr_t in_dma;
82 unsigned char* in_buffer;
83
84 /* variables used to parse messages from remote. */
85 struct bit_tester data;
86 int stage;
87 int toggle;
88};
89
90/*
91 * Table that maps the 31 possible keycodes to input keys.
92 * Currently there are 15 and 17 button models so RESERVED codes
93 * are blank areas in the mapping.
94 */
95static const int keyspan_key_table[] = {
96 KEY_RESERVED, /* 0 is just a place holder. */
97 KEY_RESERVED,
98 KEY_STOP,
99 KEY_PLAYCD,
100 KEY_RESERVED,
101 KEY_PREVIOUSSONG,
102 KEY_REWIND,
103 KEY_FORWARD,
104 KEY_NEXTSONG,
105 KEY_RESERVED,
106 KEY_RESERVED,
107 KEY_RESERVED,
108 KEY_PAUSE,
109 KEY_VOLUMEUP,
110 KEY_RESERVED,
111 KEY_RESERVED,
112 KEY_RESERVED,
113 KEY_VOLUMEDOWN,
114 KEY_RESERVED,
115 KEY_UP,
116 KEY_RESERVED,
117 KEY_MUTE,
118 KEY_LEFT,
119 KEY_ENTER,
120 KEY_RIGHT,
121 KEY_RESERVED,
122 KEY_RESERVED,
123 KEY_DOWN,
124 KEY_RESERVED,
125 KEY_KPASTERISK,
126 KEY_RESERVED,
127 KEY_MENU
128};
129
130static struct usb_driver keyspan_driver;
131
132/*
133 * Debug routine that prints out what we've received from the remote.
134 */
135static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/
136{
137 char codes[4 * RECV_SIZE];
138 int i;
139
140 for (i = 0; i < RECV_SIZE; i++)
141 snprintf(codes + i * 3, 4, "%02x ", dev->in_buffer[i]);
142
143 dev_info(&dev->udev->dev, "%s\n", codes);
144}
145
146/*
147 * Routine that manages the bit_tester structure. It makes sure that there are
148 * at least bits_needed bits loaded into the tester.
149 */
150static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed)
151{
152 if (dev->data.bits_left >= bits_needed)
153 return 0;
154
155 /*
156 * Somehow we've missed the last message. The message will be repeated
157 * though so it's not too big a deal
158 */
159 if (dev->data.pos >= dev->data.len) {
160 dev_dbg(&dev->udev->dev,
161 "%s - Error ran out of data. pos: %d, len: %d\n",
162 __FUNCTION__, dev->data.pos, dev->data.len);
163 return -1;
164 }
165
166 /* Load as much as we can into the tester. */
167 while ((dev->data.bits_left + 7 < (sizeof(dev->data.tester) * 8)) &&
168 (dev->data.pos < dev->data.len)) {
169 dev->data.tester += (dev->data.buffer[dev->data.pos++] << dev->data.bits_left);
170 dev->data.bits_left += 8;
171 }
172
173 return 0;
174}
175
176/*
177 * Routine that handles all the logic needed to parse out the message from the remote.
178 */
179static void keyspan_check_data(struct usb_keyspan *remote)
180{
181 int i;
182 int found = 0;
183 struct keyspan_message message;
184
185 switch(remote->stage) {
186 case 0:
187 /*
188 * In stage 0 we want to find the start of a message. The remote sends a 0xFF as filler.
189 * So the first byte that isn't a FF should be the start of a new message.
190 */
191 for (i = 0; i < RECV_SIZE && remote->in_buffer[i] == GAP; ++i);
192
193 if (i < RECV_SIZE) {
194 memcpy(remote->data.buffer, remote->in_buffer, RECV_SIZE);
195 remote->data.len = RECV_SIZE;
196 remote->data.pos = 0;
197 remote->data.tester = 0;
198 remote->data.bits_left = 0;
199 remote->stage = 1;
200 }
201 break;
202
203 case 1:
204 /*
205 * Stage 1 we should have 16 bytes and should be able to detect a
206 * SYNC. The SYNC is 14 bits, 7 0's and then 7 1's.
207 */
208 memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
209 remote->data.len += RECV_SIZE;
210
211 found = 0;
212 while ((remote->data.bits_left >= 14 || remote->data.pos < remote->data.len) && !found) {
213 for (i = 0; i < 8; ++i) {
214 if (keyspan_load_tester(remote, 14) != 0) {
215 remote->stage = 0;
216 return;
217 }
218
219 if ((remote->data.tester & SYNC_MASK) == SYNC) {
220 remote->data.tester = remote->data.tester >> 14;
221 remote->data.bits_left -= 14;
222 found = 1;
223 break;
224 } else {
225 remote->data.tester = remote->data.tester >> 1;
226 --remote->data.bits_left;
227 }
228 }
229 }
230
231 if (!found) {
232 remote->stage = 0;
233 remote->data.len = 0;
234 } else {
235 remote->stage = 2;
236 }
237 break;
238
239 case 2:
240 /*
241 * Stage 2 we should have 24 bytes which will be enough for a full
242 * message. We need to parse out the system code, button code,
243 * toggle code, and stop.
244 */
245 memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
246 remote->data.len += RECV_SIZE;
247
248 message.system = 0;
249 for (i = 0; i < 9; i++) {
250 keyspan_load_tester(remote, 6);
251
252 if ((remote->data.tester & ZERO_MASK) == ZERO) {
253 message.system = message.system << 1;
254 remote->data.tester = remote->data.tester >> 5;
255 remote->data.bits_left -= 5;
256 } else if ((remote->data.tester & ONE_MASK) == ONE) {
257 message.system = (message.system << 1) + 1;
258 remote->data.tester = remote->data.tester >> 6;
259 remote->data.bits_left -= 6;
260 } else {
261 err("%s - Unknown sequence found in system data.\n", __FUNCTION__);
262 remote->stage = 0;
263 return;
264 }
265 }
266
267 message.button = 0;
268 for (i = 0; i < 5; i++) {
269 keyspan_load_tester(remote, 6);
270
271 if ((remote->data.tester & ZERO_MASK) == ZERO) {
272 message.button = message.button << 1;
273 remote->data.tester = remote->data.tester >> 5;
274 remote->data.bits_left -= 5;
275 } else if ((remote->data.tester & ONE_MASK) == ONE) {
276 message.button = (message.button << 1) + 1;
277 remote->data.tester = remote->data.tester >> 6;
278 remote->data.bits_left -= 6;
279 } else {
280 err("%s - Unknown sequence found in button data.\n", __FUNCTION__);
281 remote->stage = 0;
282 return;
283 }
284 }
285
286 keyspan_load_tester(remote, 6);
287 if ((remote->data.tester & ZERO_MASK) == ZERO) {
288 message.toggle = 0;
289 remote->data.tester = remote->data.tester >> 5;
290 remote->data.bits_left -= 5;
291 } else if ((remote->data.tester & ONE_MASK) == ONE) {
292 message.toggle = 1;
293 remote->data.tester = remote->data.tester >> 6;
294 remote->data.bits_left -= 6;
295 } else {
296 err("%s - Error in message, invalid toggle.\n", __FUNCTION__);
297 remote->stage = 0;
298 return;
299 }
300
301 keyspan_load_tester(remote, 5);
302 if ((remote->data.tester & STOP_MASK) == STOP) {
303 remote->data.tester = remote->data.tester >> 5;
304 remote->data.bits_left -= 5;
305 } else {
306 err("Bad message recieved, no stop bit found.\n");
307 }
308
309 dev_dbg(&remote->udev->dev,
310 "%s found valid message: system: %d, button: %d, toggle: %d\n",
311 __FUNCTION__, message.system, message.button, message.toggle);
312
313 if (message.toggle != remote->toggle) {
314 input_report_key(remote->input, keyspan_key_table[message.button], 1);
315 input_report_key(remote->input, keyspan_key_table[message.button], 0);
316 input_sync(remote->input);
317 remote->toggle = message.toggle;
318 }
319
320 remote->stage = 0;
321 break;
322 }
323}
324
325/*
326 * Routine for sending all the initialization messages to the remote.
327 */
328static int keyspan_setup(struct usb_device* dev)
329{
330 int retval = 0;
331
332 retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
333 0x11, 0x40, 0x5601, 0x0, NULL, 0, 0);
334 if (retval) {
335 dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n",
336 __FUNCTION__, retval);
337 return(retval);
338 }
339
340 retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
341 0x44, 0x40, 0x0, 0x0, NULL, 0, 0);
342 if (retval) {
343 dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n",
344 __FUNCTION__, retval);
345 return(retval);
346 }
347
348 retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
349 0x22, 0x40, 0x0, 0x0, NULL, 0, 0);
350 if (retval) {
351 dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n",
352 __FUNCTION__, retval);
353 return(retval);
354 }
355
356 dev_dbg(&dev->dev, "%s - Setup complete.\n", __FUNCTION__);
357 return(retval);
358}
359
360/*
361 * Routine used to handle a new message that has come in.
362 */
363static void keyspan_irq_recv(struct urb *urb)
364{
365 struct usb_keyspan *dev = urb->context;
366 int retval;
367
368 /* Check our status in case we need to bail out early. */
369 switch (urb->status) {
370 case 0:
371 break;
372
373 /* Device went away so don't keep trying to read from it. */
374 case -ECONNRESET:
375 case -ENOENT:
376 case -ESHUTDOWN:
377 return;
378
379 default:
380 goto resubmit;
381 break;
382 }
383
384 if (debug)
385 keyspan_print(dev);
386
387 keyspan_check_data(dev);
388
389resubmit:
390 retval = usb_submit_urb(urb, GFP_ATOMIC);
391 if (retval)
392 err ("%s - usb_submit_urb failed with result: %d", __FUNCTION__, retval);
393}
394
395static int keyspan_open(struct input_dev *dev)
396{
397 struct usb_keyspan *remote = input_get_drvdata(dev);
398
399 remote->irq_urb->dev = remote->udev;
400 if (usb_submit_urb(remote->irq_urb, GFP_KERNEL))
401 return -EIO;
402
403 return 0;
404}
405
406static void keyspan_close(struct input_dev *dev)
407{
408 struct usb_keyspan *remote = input_get_drvdata(dev);
409
410 usb_kill_urb(remote->irq_urb);
411}
412
413static struct usb_endpoint_descriptor *keyspan_get_in_endpoint(struct usb_host_interface *iface)
414{
415
416 struct usb_endpoint_descriptor *endpoint;
417 int i;
418
419 for (i = 0; i < iface->desc.bNumEndpoints; ++i) {
420 endpoint = &iface->endpoint[i].desc;
421
422 if (usb_endpoint_is_int_in(endpoint)) {
423 /* we found our interrupt in endpoint */
424 return endpoint;
425 }
426 }
427
428 return NULL;
429}
430
431/*
432 * Routine that sets up the driver to handle a specific USB device detected on the bus.
433 */
434static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id)
435{
436 struct usb_device *udev = interface_to_usbdev(interface);
437 struct usb_endpoint_descriptor *endpoint;
438 struct usb_keyspan *remote;
439 struct input_dev *input_dev;
440 int i, error;
441
442 endpoint = keyspan_get_in_endpoint(interface->cur_altsetting);
443 if (!endpoint)
444 return -ENODEV;
445
446 remote = kzalloc(sizeof(*remote), GFP_KERNEL);
447 input_dev = input_allocate_device();
448 if (!remote || !input_dev) {
449 error = -ENOMEM;
450 goto fail1;
451 }
452
453 remote->udev = udev;
454 remote->input = input_dev;
455 remote->interface = interface;
456 remote->in_endpoint = endpoint;
457 remote->toggle = -1; /* Set to -1 so we will always not match the toggle from the first remote message. */
458
459 remote->in_buffer = usb_buffer_alloc(udev, RECV_SIZE, GFP_ATOMIC, &remote->in_dma);
460 if (!remote->in_buffer) {
461 error = -ENOMEM;
462 goto fail1;
463 }
464
465 remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
466 if (!remote->irq_urb) {
467 error = -ENOMEM;
468 goto fail2;
469 }
470
471 error = keyspan_setup(udev);
472 if (error) {
473 error = -ENODEV;
474 goto fail3;
475 }
476
477 if (udev->manufacturer)
478 strlcpy(remote->name, udev->manufacturer, sizeof(remote->name));
479
480 if (udev->product) {
481 if (udev->manufacturer)
482 strlcat(remote->name, " ", sizeof(remote->name));
483 strlcat(remote->name, udev->product, sizeof(remote->name));
484 }
485
486 if (!strlen(remote->name))
487 snprintf(remote->name, sizeof(remote->name),
488 "USB Keyspan Remote %04x:%04x",
489 le16_to_cpu(udev->descriptor.idVendor),
490 le16_to_cpu(udev->descriptor.idProduct));
491
492 usb_make_path(udev, remote->phys, sizeof(remote->phys));
493 strlcat(remote->phys, "/input0", sizeof(remote->phys));
494
495 input_dev->name = remote->name;
496 input_dev->phys = remote->phys;
497 usb_to_input_id(udev, &input_dev->id);
498 input_dev->dev.parent = &interface->dev;
499
500 input_dev->evbit[0] = BIT(EV_KEY); /* We will only report KEY events. */
501 for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++)
502 if (keyspan_key_table[i] != KEY_RESERVED)
503 set_bit(keyspan_key_table[i], input_dev->keybit);
504
505 input_set_drvdata(input_dev, remote);
506
507 input_dev->open = keyspan_open;
508 input_dev->close = keyspan_close;
509
510 /*
511 * Initialize the URB to access the device. The urb gets sent to the device in keyspan_open()
512 */
513 usb_fill_int_urb(remote->irq_urb,
514 remote->udev, usb_rcvintpipe(remote->udev, remote->in_endpoint->bEndpointAddress),
515 remote->in_buffer, RECV_SIZE, keyspan_irq_recv, remote,
516 remote->in_endpoint->bInterval);
517 remote->irq_urb->transfer_dma = remote->in_dma;
518 remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
519
520 /* we can register the device now, as it is ready */
521 error = input_register_device(remote->input);
522 if (error)
523 goto fail3;
524
525 /* save our data pointer in this interface device */
526 usb_set_intfdata(interface, remote);
527
528 return 0;
529
530 fail3: usb_free_urb(remote->irq_urb);
531 fail2: usb_buffer_free(udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
532 fail1: kfree(remote);
533 input_free_device(input_dev);
534
535 return error;
536}
537
538/*
539 * Routine called when a device is disconnected from the USB.
540 */
541static void keyspan_disconnect(struct usb_interface *interface)
542{
543 struct usb_keyspan *remote;
544
545 remote = usb_get_intfdata(interface);
546 usb_set_intfdata(interface, NULL);
547
548 if (remote) { /* We have a valid driver structure so clean up everything we allocated. */
549 input_unregister_device(remote->input);
550 usb_kill_urb(remote->irq_urb);
551 usb_free_urb(remote->irq_urb);
552 usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
553 kfree(remote);
554 }
555}
556
557/*
558 * Standard driver set up sections
559 */
560static struct usb_driver keyspan_driver =
561{
562 .name = "keyspan_remote",
563 .probe = keyspan_probe,
564 .disconnect = keyspan_disconnect,
565 .id_table = keyspan_table
566};
567
568static int __init usb_keyspan_init(void)
569{
570 int result;
571
572 /* register this driver with the USB subsystem */
573 result = usb_register(&keyspan_driver);
574 if (result)
575 err("usb_register failed. Error number %d\n", result);
576
577 return result;
578}
579
580static void __exit usb_keyspan_exit(void)
581{
582 /* deregister this driver with the USB subsystem */
583 usb_deregister(&keyspan_driver);
584}
585
586module_init(usb_keyspan_init);
587module_exit(usb_keyspan_exit);
588
589MODULE_DEVICE_TABLE(usb, keyspan_table);
590MODULE_AUTHOR(DRIVER_AUTHOR);
591MODULE_DESCRIPTION(DRIVER_DESC);
592MODULE_LICENSE(DRIVER_LICENSE);
diff --git a/drivers/input/misc/map_to_7segment.h b/drivers/input/misc/map_to_7segment.h
new file mode 100644
index 000000000000..a424094d9fe2
--- /dev/null
+++ b/drivers/input/misc/map_to_7segment.h
@@ -0,0 +1,189 @@
1/*
2 * drivers/usb/input/map_to_7segment.h
3 *
4 * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License as
8 * published by the Free Software Foundation; either version 2 of
9 * the License, or (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21#ifndef MAP_TO_7SEGMENT_H
22#define MAP_TO_7SEGMENT_H
23
24/* This file provides translation primitives and tables for the conversion
25 * of (ASCII) characters to a 7-segments notation.
26 *
27 * The 7 segment's wikipedia notation below is used as standard.
28 * See: http://en.wikipedia.org/wiki/Seven_segment_display
29 *
30 * Notation: +-a-+
31 * f b
32 * +-g-+
33 * e c
34 * +-d-+
35 *
36 * Usage:
37 *
38 * Register a map variable, and fill it with a character set:
39 * static SEG7_DEFAULT_MAP(map_seg7);
40 *
41 *
42 * Then use for conversion:
43 * seg7 = map_to_seg7(&map_seg7, some_char);
44 * ...
45 *
46 * In device drivers it is recommended, if required, to make the char map
47 * accessible via the sysfs interface using the following scheme:
48 *
49 * static ssize_t show_map(struct device *dev, char *buf) {
50 * memcpy(buf, &map_seg7, sizeof(map_seg7));
51 * return sizeof(map_seg7);
52 * }
53 * static ssize_t store_map(struct device *dev, const char *buf, size_t cnt) {
54 * if(cnt != sizeof(map_seg7))
55 * return -EINVAL;
56 * memcpy(&map_seg7, buf, cnt);
57 * return cnt;
58 * }
59 * static DEVICE_ATTR(map_seg7, PERMS_RW, show_map, store_map);
60 *
61 * History:
62 * 2005-05-31 RFC linux-kernel@vger.kernel.org
63 */
64#include <linux/errno.h>
65
66
67#define BIT_SEG7_A 0
68#define BIT_SEG7_B 1
69#define BIT_SEG7_C 2
70#define BIT_SEG7_D 3
71#define BIT_SEG7_E 4
72#define BIT_SEG7_F 5
73#define BIT_SEG7_G 6
74#define BIT_SEG7_RESERVED 7
75
76struct seg7_conversion_map {
77 unsigned char table[128];
78};
79
80static inline int map_to_seg7(struct seg7_conversion_map *map, int c)
81{
82 return c >= 0 && c < sizeof(map->table) ? map->table[c] : -EINVAL;
83}
84
85#define SEG7_CONVERSION_MAP(_name, _map) \
86 struct seg7_conversion_map _name = { .table = { _map } }
87
88/*
89 * It is recommended to use a facility that allows user space to redefine
90 * custom character sets for LCD devices. Please use a sysfs interface
91 * as described above.
92 */
93#define MAP_TO_SEG7_SYSFS_FILE "map_seg7"
94
95/*******************************************************************************
96 * ASCII conversion table
97 ******************************************************************************/
98
99#define _SEG7(l,a,b,c,d,e,f,g) \
100 ( a<<BIT_SEG7_A | b<<BIT_SEG7_B | c<<BIT_SEG7_C | d<<BIT_SEG7_D | \
101 e<<BIT_SEG7_E | f<<BIT_SEG7_F | g<<BIT_SEG7_G )
102
103#define _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \
104 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
105
106#define _MAP_33_47_ASCII_SEG7_SYMBOL \
107 _SEG7('!',0,0,0,0,1,1,0), _SEG7('"',0,1,0,0,0,1,0), _SEG7('#',0,1,1,0,1,1,0),\
108 _SEG7('$',1,0,1,1,0,1,1), _SEG7('%',0,0,1,0,0,1,0), _SEG7('&',1,0,1,1,1,1,1),\
109 _SEG7('\'',0,0,0,0,0,1,0),_SEG7('(',1,0,0,1,1,1,0), _SEG7(')',1,1,1,1,0,0,0),\
110 _SEG7('*',0,1,1,0,1,1,1), _SEG7('+',0,1,1,0,0,0,1), _SEG7(',',0,0,0,0,1,0,0),\
111 _SEG7('-',0,0,0,0,0,0,1), _SEG7('.',0,0,0,0,1,0,0), _SEG7('/',0,1,0,0,1,0,1),
112
113#define _MAP_48_57_ASCII_SEG7_NUMERIC \
114 _SEG7('0',1,1,1,1,1,1,0), _SEG7('1',0,1,1,0,0,0,0), _SEG7('2',1,1,0,1,1,0,1),\
115 _SEG7('3',1,1,1,1,0,0,1), _SEG7('4',0,1,1,0,0,1,1), _SEG7('5',1,0,1,1,0,1,1),\
116 _SEG7('6',1,0,1,1,1,1,1), _SEG7('7',1,1,1,0,0,0,0), _SEG7('8',1,1,1,1,1,1,1),\
117 _SEG7('9',1,1,1,1,0,1,1),
118
119#define _MAP_58_64_ASCII_SEG7_SYMBOL \
120 _SEG7(':',0,0,0,1,0,0,1), _SEG7(';',0,0,0,1,0,0,1), _SEG7('<',1,0,0,0,0,1,1),\
121 _SEG7('=',0,0,0,1,0,0,1), _SEG7('>',1,1,0,0,0,0,1), _SEG7('?',1,1,1,0,0,1,0),\
122 _SEG7('@',1,1,0,1,1,1,1),
123
124#define _MAP_65_90_ASCII_SEG7_ALPHA_UPPR \
125 _SEG7('A',1,1,1,0,1,1,1), _SEG7('B',1,1,1,1,1,1,1), _SEG7('C',1,0,0,1,1,1,0),\
126 _SEG7('D',1,1,1,1,1,1,0), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
127 _SEG7('G',1,1,1,1,0,1,1), _SEG7('H',0,1,1,0,1,1,1), _SEG7('I',0,1,1,0,0,0,0),\
128 _SEG7('J',0,1,1,1,0,0,0), _SEG7('K',0,1,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
129 _SEG7('M',1,1,1,0,1,1,0), _SEG7('N',1,1,1,0,1,1,0), _SEG7('O',1,1,1,1,1,1,0),\
130 _SEG7('P',1,1,0,0,1,1,1), _SEG7('Q',1,1,1,1,1,1,0), _SEG7('R',1,1,1,0,1,1,1),\
131 _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('U',0,1,1,1,1,1,0),\
132 _SEG7('V',0,1,1,1,1,1,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
133 _SEG7('Y',0,1,1,0,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
134
135#define _MAP_91_96_ASCII_SEG7_SYMBOL \
136 _SEG7('[',1,0,0,1,1,1,0), _SEG7('\\',0,0,1,0,0,1,1),_SEG7(']',1,1,1,1,0,0,0),\
137 _SEG7('^',1,1,0,0,0,1,0), _SEG7('_',0,0,0,1,0,0,0), _SEG7('`',0,1,0,0,0,0,0),
138
139#define _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \
140 _SEG7('A',1,1,1,0,1,1,1), _SEG7('b',0,0,1,1,1,1,1), _SEG7('c',0,0,0,1,1,0,1),\
141 _SEG7('d',0,1,1,1,1,0,1), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
142 _SEG7('G',1,1,1,1,0,1,1), _SEG7('h',0,0,1,0,1,1,1), _SEG7('i',0,0,1,0,0,0,0),\
143 _SEG7('j',0,0,1,1,0,0,0), _SEG7('k',0,0,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
144 _SEG7('M',1,1,1,0,1,1,0), _SEG7('n',0,0,1,0,1,0,1), _SEG7('o',0,0,1,1,1,0,1),\
145 _SEG7('P',1,1,0,0,1,1,1), _SEG7('q',1,1,1,0,0,1,1), _SEG7('r',0,0,0,0,1,0,1),\
146 _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('u',0,0,1,1,1,0,0),\
147 _SEG7('v',0,0,1,1,1,0,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
148 _SEG7('y',0,1,1,1,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
149
150#define _MAP_123_126_ASCII_SEG7_SYMBOL \
151 _SEG7('{',1,0,0,1,1,1,0), _SEG7('|',0,0,0,0,1,1,0), _SEG7('}',1,1,1,1,0,0,0),\
152 _SEG7('~',1,0,0,0,0,0,0),
153
154/* Maps */
155
156/* This set tries to map as close as possible to the visible characteristics
157 * of the ASCII symbol, lowercase and uppercase letters may differ in
158 * presentation on the display.
159 */
160#define MAP_ASCII7SEG_ALPHANUM \
161 _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \
162 _MAP_33_47_ASCII_SEG7_SYMBOL \
163 _MAP_48_57_ASCII_SEG7_NUMERIC \
164 _MAP_58_64_ASCII_SEG7_SYMBOL \
165 _MAP_65_90_ASCII_SEG7_ALPHA_UPPR \
166 _MAP_91_96_ASCII_SEG7_SYMBOL \
167 _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \
168 _MAP_123_126_ASCII_SEG7_SYMBOL
169
170/* This set tries to map as close as possible to the symbolic characteristics
171 * of the ASCII character for maximum discrimination.
172 * For now this means all alpha chars are in lower case representations.
173 * (This for example facilitates the use of hex numbers with uppercase input.)
174 */
175#define MAP_ASCII7SEG_ALPHANUM_LC \
176 _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \
177 _MAP_33_47_ASCII_SEG7_SYMBOL \
178 _MAP_48_57_ASCII_SEG7_NUMERIC \
179 _MAP_58_64_ASCII_SEG7_SYMBOL \
180 _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \
181 _MAP_91_96_ASCII_SEG7_SYMBOL \
182 _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \
183 _MAP_123_126_ASCII_SEG7_SYMBOL
184
185#define SEG7_DEFAULT_MAP(_name) \
186 SEG7_CONVERSION_MAP(_name,MAP_ASCII7SEG_ALPHANUM)
187
188#endif /* MAP_TO_7SEGMENT_H */
189
diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c
new file mode 100644
index 000000000000..448a470d28f2
--- /dev/null
+++ b/drivers/input/misc/powermate.c
@@ -0,0 +1,463 @@
1/*
2 * A driver for the Griffin Technology, Inc. "PowerMate" USB controller dial.
3 *
4 * v1.1, (c)2002 William R Sowerbutts <will@sowerbutts.com>
5 *
6 * This device is a anodised aluminium knob which connects over USB. It can measure
7 * clockwise and anticlockwise rotation. The dial also acts as a pushbutton with
8 * a spring for automatic release. The base contains a pair of LEDs which illuminate
9 * the translucent base. It rotates without limit and reports its relative rotation
10 * back to the host when polled by the USB controller.
11 *
12 * Testing with the knob I have has shown that it measures approximately 94 "clicks"
13 * for one full rotation. Testing with my High Speed Rotation Actuator (ok, it was
14 * a variable speed cordless electric drill) has shown that the device can measure
15 * speeds of up to 7 clicks either clockwise or anticlockwise between pollings from
16 * the host. If it counts more than 7 clicks before it is polled, it will wrap back
17 * to zero and start counting again. This was at quite high speed, however, almost
18 * certainly faster than the human hand could turn it. Griffin say that it loses a
19 * pulse or two on a direction change; the granularity is so fine that I never
20 * noticed this in practice.
21 *
22 * The device's microcontroller can be programmed to set the LED to either a constant
23 * intensity, or to a rhythmic pulsing. Several patterns and speeds are available.
24 *
25 * Griffin were very happy to provide documentation and free hardware for development.
26 *
27 * Some userspace tools are available on the web: http://sowerbutts.com/powermate/
28 *
29 */
30
31#include <linux/kernel.h>
32#include <linux/slab.h>
33#include <linux/module.h>
34#include <linux/init.h>
35#include <linux/spinlock.h>
36#include <linux/usb/input.h>
37
38#define POWERMATE_VENDOR 0x077d /* Griffin Technology, Inc. */
39#define POWERMATE_PRODUCT_NEW 0x0410 /* Griffin PowerMate */
40#define POWERMATE_PRODUCT_OLD 0x04AA /* Griffin soundKnob */
41
42#define CONTOUR_VENDOR 0x05f3 /* Contour Design, Inc. */
43#define CONTOUR_JOG 0x0240 /* Jog and Shuttle */
44
45/* these are the command codes we send to the device */
46#define SET_STATIC_BRIGHTNESS 0x01
47#define SET_PULSE_ASLEEP 0x02
48#define SET_PULSE_AWAKE 0x03
49#define SET_PULSE_MODE 0x04
50
51/* these refer to bits in the powermate_device's requires_update field. */
52#define UPDATE_STATIC_BRIGHTNESS (1<<0)
53#define UPDATE_PULSE_ASLEEP (1<<1)
54#define UPDATE_PULSE_AWAKE (1<<2)
55#define UPDATE_PULSE_MODE (1<<3)
56
57/* at least two versions of the hardware exist, with differing payload
58 sizes. the first three bytes always contain the "interesting" data in
59 the relevant format. */
60#define POWERMATE_PAYLOAD_SIZE_MAX 6
61#define POWERMATE_PAYLOAD_SIZE_MIN 3
62struct powermate_device {
63 signed char *data;
64 dma_addr_t data_dma;
65 struct urb *irq, *config;
66 struct usb_ctrlrequest *configcr;
67 dma_addr_t configcr_dma;
68 struct usb_device *udev;
69 struct input_dev *input;
70 spinlock_t lock;
71 int static_brightness;
72 int pulse_speed;
73 int pulse_table;
74 int pulse_asleep;
75 int pulse_awake;
76 int requires_update; // physical settings which are out of sync
77 char phys[64];
78};
79
80static char pm_name_powermate[] = "Griffin PowerMate";
81static char pm_name_soundknob[] = "Griffin SoundKnob";
82
83static void powermate_config_complete(struct urb *urb);
84
85/* Callback for data arriving from the PowerMate over the USB interrupt pipe */
86static void powermate_irq(struct urb *urb)
87{
88 struct powermate_device *pm = urb->context;
89 int retval;
90
91 switch (urb->status) {
92 case 0:
93 /* success */
94 break;
95 case -ECONNRESET:
96 case -ENOENT:
97 case -ESHUTDOWN:
98 /* this urb is terminated, clean up */
99 dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
100 return;
101 default:
102 dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
103 goto exit;
104 }
105
106 /* handle updates to device state */
107 input_report_key(pm->input, BTN_0, pm->data[0] & 0x01);
108 input_report_rel(pm->input, REL_DIAL, pm->data[1]);
109 input_sync(pm->input);
110
111exit:
112 retval = usb_submit_urb (urb, GFP_ATOMIC);
113 if (retval)
114 err ("%s - usb_submit_urb failed with result %d",
115 __FUNCTION__, retval);
116}
117
118/* Decide if we need to issue a control message and do so. Must be called with pm->lock taken */
119static void powermate_sync_state(struct powermate_device *pm)
120{
121 if (pm->requires_update == 0)
122 return; /* no updates are required */
123 if (pm->config->status == -EINPROGRESS)
124 return; /* an update is already in progress; it'll issue this update when it completes */
125
126 if (pm->requires_update & UPDATE_PULSE_ASLEEP){
127 pm->configcr->wValue = cpu_to_le16( SET_PULSE_ASLEEP );
128 pm->configcr->wIndex = cpu_to_le16( pm->pulse_asleep ? 1 : 0 );
129 pm->requires_update &= ~UPDATE_PULSE_ASLEEP;
130 }else if (pm->requires_update & UPDATE_PULSE_AWAKE){
131 pm->configcr->wValue = cpu_to_le16( SET_PULSE_AWAKE );
132 pm->configcr->wIndex = cpu_to_le16( pm->pulse_awake ? 1 : 0 );
133 pm->requires_update &= ~UPDATE_PULSE_AWAKE;
134 }else if (pm->requires_update & UPDATE_PULSE_MODE){
135 int op, arg;
136 /* the powermate takes an operation and an argument for its pulse algorithm.
137 the operation can be:
138 0: divide the speed
139 1: pulse at normal speed
140 2: multiply the speed
141 the argument only has an effect for operations 0 and 2, and ranges between
142 1 (least effect) to 255 (maximum effect).
143
144 thus, several states are equivalent and are coalesced into one state.
145
146 we map this onto a range from 0 to 510, with:
147 0 -- 254 -- use divide (0 = slowest)
148 255 -- use normal speed
149 256 -- 510 -- use multiple (510 = fastest).
150
151 Only values of 'arg' quite close to 255 are particularly useful/spectacular.
152 */
153 if (pm->pulse_speed < 255) {
154 op = 0; // divide
155 arg = 255 - pm->pulse_speed;
156 } else if (pm->pulse_speed > 255) {
157 op = 2; // multiply
158 arg = pm->pulse_speed - 255;
159 } else {
160 op = 1; // normal speed
161 arg = 0; // can be any value
162 }
163 pm->configcr->wValue = cpu_to_le16( (pm->pulse_table << 8) | SET_PULSE_MODE );
164 pm->configcr->wIndex = cpu_to_le16( (arg << 8) | op );
165 pm->requires_update &= ~UPDATE_PULSE_MODE;
166 } else if (pm->requires_update & UPDATE_STATIC_BRIGHTNESS) {
167 pm->configcr->wValue = cpu_to_le16( SET_STATIC_BRIGHTNESS );
168 pm->configcr->wIndex = cpu_to_le16( pm->static_brightness );
169 pm->requires_update &= ~UPDATE_STATIC_BRIGHTNESS;
170 } else {
171 printk(KERN_ERR "powermate: unknown update required");
172 pm->requires_update = 0; /* fudge the bug */
173 return;
174 }
175
176/* printk("powermate: %04x %04x\n", pm->configcr->wValue, pm->configcr->wIndex); */
177
178 pm->configcr->bRequestType = 0x41; /* vendor request */
179 pm->configcr->bRequest = 0x01;
180 pm->configcr->wLength = 0;
181
182 usb_fill_control_urb(pm->config, pm->udev, usb_sndctrlpipe(pm->udev, 0),
183 (void *) pm->configcr, NULL, 0,
184 powermate_config_complete, pm);
185 pm->config->setup_dma = pm->configcr_dma;
186 pm->config->transfer_flags |= URB_NO_SETUP_DMA_MAP;
187
188 if (usb_submit_urb(pm->config, GFP_ATOMIC))
189 printk(KERN_ERR "powermate: usb_submit_urb(config) failed");
190}
191
192/* Called when our asynchronous control message completes. We may need to issue another immediately */
193static void powermate_config_complete(struct urb *urb)
194{
195 struct powermate_device *pm = urb->context;
196 unsigned long flags;
197
198 if (urb->status)
199 printk(KERN_ERR "powermate: config urb returned %d\n", urb->status);
200
201 spin_lock_irqsave(&pm->lock, flags);
202 powermate_sync_state(pm);
203 spin_unlock_irqrestore(&pm->lock, flags);
204}
205
206/* Set the LED up as described and begin the sync with the hardware if required */
207static void powermate_pulse_led(struct powermate_device *pm, int static_brightness, int pulse_speed,
208 int pulse_table, int pulse_asleep, int pulse_awake)
209{
210 unsigned long flags;
211
212 if (pulse_speed < 0)
213 pulse_speed = 0;
214 if (pulse_table < 0)
215 pulse_table = 0;
216 if (pulse_speed > 510)
217 pulse_speed = 510;
218 if (pulse_table > 2)
219 pulse_table = 2;
220
221 pulse_asleep = !!pulse_asleep;
222 pulse_awake = !!pulse_awake;
223
224
225 spin_lock_irqsave(&pm->lock, flags);
226
227 /* mark state updates which are required */
228 if (static_brightness != pm->static_brightness) {
229 pm->static_brightness = static_brightness;
230 pm->requires_update |= UPDATE_STATIC_BRIGHTNESS;
231 }
232 if (pulse_asleep != pm->pulse_asleep) {
233 pm->pulse_asleep = pulse_asleep;
234 pm->requires_update |= (UPDATE_PULSE_ASLEEP | UPDATE_STATIC_BRIGHTNESS);
235 }
236 if (pulse_awake != pm->pulse_awake) {
237 pm->pulse_awake = pulse_awake;
238 pm->requires_update |= (UPDATE_PULSE_AWAKE | UPDATE_STATIC_BRIGHTNESS);
239 }
240 if (pulse_speed != pm->pulse_speed || pulse_table != pm->pulse_table) {
241 pm->pulse_speed = pulse_speed;
242 pm->pulse_table = pulse_table;
243 pm->requires_update |= UPDATE_PULSE_MODE;
244 }
245
246 powermate_sync_state(pm);
247
248 spin_unlock_irqrestore(&pm->lock, flags);
249}
250
251/* Callback from the Input layer when an event arrives from userspace to configure the LED */
252static int powermate_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int _value)
253{
254 unsigned int command = (unsigned int)_value;
255 struct powermate_device *pm = input_get_drvdata(dev);
256
257 if (type == EV_MSC && code == MSC_PULSELED){
258 /*
259 bits 0- 7: 8 bits: LED brightness
260 bits 8-16: 9 bits: pulsing speed modifier (0 ... 510); 0-254 = slower, 255 = standard, 256-510 = faster.
261 bits 17-18: 2 bits: pulse table (0, 1, 2 valid)
262 bit 19: 1 bit : pulse whilst asleep?
263 bit 20: 1 bit : pulse constantly?
264 */
265 int static_brightness = command & 0xFF; // bits 0-7
266 int pulse_speed = (command >> 8) & 0x1FF; // bits 8-16
267 int pulse_table = (command >> 17) & 0x3; // bits 17-18
268 int pulse_asleep = (command >> 19) & 0x1; // bit 19
269 int pulse_awake = (command >> 20) & 0x1; // bit 20
270
271 powermate_pulse_led(pm, static_brightness, pulse_speed, pulse_table, pulse_asleep, pulse_awake);
272 }
273
274 return 0;
275}
276
277static int powermate_alloc_buffers(struct usb_device *udev, struct powermate_device *pm)
278{
279 pm->data = usb_buffer_alloc(udev, POWERMATE_PAYLOAD_SIZE_MAX,
280 GFP_ATOMIC, &pm->data_dma);
281 if (!pm->data)
282 return -1;
283
284 pm->configcr = usb_buffer_alloc(udev, sizeof(*(pm->configcr)),
285 GFP_ATOMIC, &pm->configcr_dma);
286 if (!pm->configcr)
287 return -1;
288
289 return 0;
290}
291
292static void powermate_free_buffers(struct usb_device *udev, struct powermate_device *pm)
293{
294 usb_buffer_free(udev, POWERMATE_PAYLOAD_SIZE_MAX,
295 pm->data, pm->data_dma);
296 usb_buffer_free(udev, sizeof(*(pm->configcr)),
297 pm->configcr, pm->configcr_dma);
298}
299
300/* Called whenever a USB device matching one in our supported devices table is connected */
301static int powermate_probe(struct usb_interface *intf, const struct usb_device_id *id)
302{
303 struct usb_device *udev = interface_to_usbdev (intf);
304 struct usb_host_interface *interface;
305 struct usb_endpoint_descriptor *endpoint;
306 struct powermate_device *pm;
307 struct input_dev *input_dev;
308 int pipe, maxp;
309 int error = -ENOMEM;
310
311 interface = intf->cur_altsetting;
312 endpoint = &interface->endpoint[0].desc;
313 if (!usb_endpoint_is_int_in(endpoint))
314 return -EIO;
315
316 usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
317 0x0a, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
318 0, interface->desc.bInterfaceNumber, NULL, 0,
319 USB_CTRL_SET_TIMEOUT);
320
321 pm = kzalloc(sizeof(struct powermate_device), GFP_KERNEL);
322 input_dev = input_allocate_device();
323 if (!pm || !input_dev)
324 goto fail1;
325
326 if (powermate_alloc_buffers(udev, pm))
327 goto fail2;
328
329 pm->irq = usb_alloc_urb(0, GFP_KERNEL);
330 if (!pm->irq)
331 goto fail2;
332
333 pm->config = usb_alloc_urb(0, GFP_KERNEL);
334 if (!pm->config)
335 goto fail3;
336
337 pm->udev = udev;
338 pm->input = input_dev;
339
340 usb_make_path(udev, pm->phys, sizeof(pm->phys));
341 strlcpy(pm->phys, "/input0", sizeof(pm->phys));
342
343 spin_lock_init(&pm->lock);
344
345 switch (le16_to_cpu(udev->descriptor.idProduct)) {
346 case POWERMATE_PRODUCT_NEW:
347 input_dev->name = pm_name_powermate;
348 break;
349 case POWERMATE_PRODUCT_OLD:
350 input_dev->name = pm_name_soundknob;
351 break;
352 default:
353 input_dev->name = pm_name_soundknob;
354 printk(KERN_WARNING "powermate: unknown product id %04x\n",
355 le16_to_cpu(udev->descriptor.idProduct));
356 }
357
358 input_dev->phys = pm->phys;
359 usb_to_input_id(udev, &input_dev->id);
360 input_dev->dev.parent = &intf->dev;
361
362 input_set_drvdata(input_dev, pm);
363
364 input_dev->event = powermate_input_event;
365
366 input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_MSC);
367 input_dev->keybit[LONG(BTN_0)] = BIT(BTN_0);
368 input_dev->relbit[LONG(REL_DIAL)] = BIT(REL_DIAL);
369 input_dev->mscbit[LONG(MSC_PULSELED)] = BIT(MSC_PULSELED);
370
371 /* get a handle to the interrupt data pipe */
372 pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
373 maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
374
375 if (maxp < POWERMATE_PAYLOAD_SIZE_MIN || maxp > POWERMATE_PAYLOAD_SIZE_MAX) {
376 printk(KERN_WARNING "powermate: Expected payload of %d--%d bytes, found %d bytes!\n",
377 POWERMATE_PAYLOAD_SIZE_MIN, POWERMATE_PAYLOAD_SIZE_MAX, maxp);
378 maxp = POWERMATE_PAYLOAD_SIZE_MAX;
379 }
380
381 usb_fill_int_urb(pm->irq, udev, pipe, pm->data,
382 maxp, powermate_irq,
383 pm, endpoint->bInterval);
384 pm->irq->transfer_dma = pm->data_dma;
385 pm->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
386
387 /* register our interrupt URB with the USB system */
388 if (usb_submit_urb(pm->irq, GFP_KERNEL)) {
389 error = -EIO;
390 goto fail4;
391 }
392
393 error = input_register_device(pm->input);
394 if (error)
395 goto fail5;
396
397
398 /* force an update of everything */
399 pm->requires_update = UPDATE_PULSE_ASLEEP | UPDATE_PULSE_AWAKE | UPDATE_PULSE_MODE | UPDATE_STATIC_BRIGHTNESS;
400 powermate_pulse_led(pm, 0x80, 255, 0, 1, 0); // set default pulse parameters
401
402 usb_set_intfdata(intf, pm);
403 return 0;
404
405 fail5: usb_kill_urb(pm->irq);
406 fail4: usb_free_urb(pm->config);
407 fail3: usb_free_urb(pm->irq);
408 fail2: powermate_free_buffers(udev, pm);
409 fail1: input_free_device(input_dev);
410 kfree(pm);
411 return error;
412}
413
414/* Called when a USB device we've accepted ownership of is removed */
415static void powermate_disconnect(struct usb_interface *intf)
416{
417 struct powermate_device *pm = usb_get_intfdata (intf);
418
419 usb_set_intfdata(intf, NULL);
420 if (pm) {
421 pm->requires_update = 0;
422 usb_kill_urb(pm->irq);
423 input_unregister_device(pm->input);
424 usb_free_urb(pm->irq);
425 usb_free_urb(pm->config);
426 powermate_free_buffers(interface_to_usbdev(intf), pm);
427
428 kfree(pm);
429 }
430}
431
432static struct usb_device_id powermate_devices [] = {
433 { USB_DEVICE(POWERMATE_VENDOR, POWERMATE_PRODUCT_NEW) },
434 { USB_DEVICE(POWERMATE_VENDOR, POWERMATE_PRODUCT_OLD) },
435 { USB_DEVICE(CONTOUR_VENDOR, CONTOUR_JOG) },
436 { } /* Terminating entry */
437};
438
439MODULE_DEVICE_TABLE (usb, powermate_devices);
440
441static struct usb_driver powermate_driver = {
442 .name = "powermate",
443 .probe = powermate_probe,
444 .disconnect = powermate_disconnect,
445 .id_table = powermate_devices,
446};
447
448static int __init powermate_init(void)
449{
450 return usb_register(&powermate_driver);
451}
452
453static void __exit powermate_cleanup(void)
454{
455 usb_deregister(&powermate_driver);
456}
457
458module_init(powermate_init);
459module_exit(powermate_cleanup);
460
461MODULE_AUTHOR( "William R Sowerbutts" );
462MODULE_DESCRIPTION( "Griffin Technology, Inc PowerMate driver" );
463MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/yealink.c b/drivers/input/misc/yealink.c
new file mode 100644
index 000000000000..ab15880fd566
--- /dev/null
+++ b/drivers/input/misc/yealink.c
@@ -0,0 +1,1004 @@
1/*
2 * drivers/usb/input/yealink.c
3 *
4 * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License as
8 * published by the Free Software Foundation; either version 2 of
9 * the License, or (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20/*
21 * Description:
22 * Driver for the USB-P1K voip usb phone.
23 * This device is produced by Yealink Network Technology Co Ltd
24 * but may be branded under several names:
25 * - Yealink usb-p1k
26 * - Tiptel 115
27 * - ...
28 *
29 * This driver is based on:
30 * - the usbb2k-api http://savannah.nongnu.org/projects/usbb2k-api/
31 * - information from http://memeteau.free.fr/usbb2k
32 * - the xpad-driver drivers/input/joystick/xpad.c
33 *
34 * Thanks to:
35 * - Olivier Vandorpe, for providing the usbb2k-api.
36 * - Martin Diehl, for spotting my memory allocation bug.
37 *
38 * History:
39 * 20050527 henk First version, functional keyboard. Keyboard events
40 * will pop-up on the ../input/eventX bus.
41 * 20050531 henk Added led, LCD, dialtone and sysfs interface.
42 * 20050610 henk Cleanups, make it ready for public consumption.
43 * 20050630 henk Cleanups, fixes in response to comments.
44 * 20050701 henk sysfs write serialisation, fix potential unload races
45 * 20050801 henk Added ringtone, restructure USB
46 * 20050816 henk Merge 2.6.13-rc6
47 */
48
49#include <linux/kernel.h>
50#include <linux/init.h>
51#include <linux/slab.h>
52#include <linux/module.h>
53#include <linux/rwsem.h>
54#include <linux/usb/input.h>
55
56#include "map_to_7segment.h"
57#include "yealink.h"
58
59#define DRIVER_VERSION "yld-20051230"
60#define DRIVER_AUTHOR "Henk Vergonet"
61#define DRIVER_DESC "Yealink phone driver"
62
63#define YEALINK_POLLING_FREQUENCY 10 /* in [Hz] */
64
65struct yld_status {
66 u8 lcd[24];
67 u8 led;
68 u8 dialtone;
69 u8 ringtone;
70 u8 keynum;
71} __attribute__ ((packed));
72
73/*
74 * Register the LCD segment and icon map
75 */
76#define _LOC(k,l) { .a = (k), .m = (l) }
77#define _SEG(t, a, am, b, bm, c, cm, d, dm, e, em, f, fm, g, gm) \
78 { .type = (t), \
79 .u = { .s = { _LOC(a, am), _LOC(b, bm), _LOC(c, cm), \
80 _LOC(d, dm), _LOC(e, em), _LOC(g, gm), \
81 _LOC(f, fm) } } }
82#define _PIC(t, h, hm, n) \
83 { .type = (t), \
84 .u = { .p = { .name = (n), .a = (h), .m = (hm) } } }
85
86static const struct lcd_segment_map {
87 char type;
88 union {
89 struct pictogram_map {
90 u8 a,m;
91 char name[10];
92 } p;
93 struct segment_map {
94 u8 a,m;
95 } s[7];
96 } u;
97} lcdMap[] = {
98#include "yealink.h"
99};
100
101struct yealink_dev {
102 struct input_dev *idev; /* input device */
103 struct usb_device *udev; /* usb device */
104
105 /* irq input channel */
106 struct yld_ctl_packet *irq_data;
107 dma_addr_t irq_dma;
108 struct urb *urb_irq;
109
110 /* control output channel */
111 struct yld_ctl_packet *ctl_data;
112 dma_addr_t ctl_dma;
113 struct usb_ctrlrequest *ctl_req;
114 dma_addr_t ctl_req_dma;
115 struct urb *urb_ctl;
116
117 char phys[64]; /* physical device path */
118
119 u8 lcdMap[ARRAY_SIZE(lcdMap)]; /* state of LCD, LED ... */
120 int key_code; /* last reported key */
121
122 int stat_ix;
123 union {
124 struct yld_status s;
125 u8 b[sizeof(struct yld_status)];
126 } master, copy;
127};
128
129
130/*******************************************************************************
131 * Yealink lcd interface
132 ******************************************************************************/
133
134/*
135 * Register a default 7 segment character set
136 */
137static SEG7_DEFAULT_MAP(map_seg7);
138
139 /* Display a char,
140 * char '\9' and '\n' are placeholders and do not overwrite the original text.
141 * A space will always hide an icon.
142 */
143static int setChar(struct yealink_dev *yld, int el, int chr)
144{
145 int i, a, m, val;
146
147 if (el >= ARRAY_SIZE(lcdMap))
148 return -EINVAL;
149
150 if (chr == '\t' || chr == '\n')
151 return 0;
152
153 yld->lcdMap[el] = chr;
154
155 if (lcdMap[el].type == '.') {
156 a = lcdMap[el].u.p.a;
157 m = lcdMap[el].u.p.m;
158 if (chr != ' ')
159 yld->master.b[a] |= m;
160 else
161 yld->master.b[a] &= ~m;
162 return 0;
163 }
164
165 val = map_to_seg7(&map_seg7, chr);
166 for (i = 0; i < ARRAY_SIZE(lcdMap[0].u.s); i++) {
167 m = lcdMap[el].u.s[i].m;
168
169 if (m == 0)
170 continue;
171
172 a = lcdMap[el].u.s[i].a;
173 if (val & 1)
174 yld->master.b[a] |= m;
175 else
176 yld->master.b[a] &= ~m;
177 val = val >> 1;
178 }
179 return 0;
180};
181
182/*******************************************************************************
183 * Yealink key interface
184 ******************************************************************************/
185
186/* Map device buttons to internal key events.
187 *
188 * USB-P1K button layout:
189 *
190 * up
191 * IN OUT
192 * down
193 *
194 * pickup C hangup
195 * 1 2 3
196 * 4 5 6
197 * 7 8 9
198 * * 0 #
199 *
200 * The "up" and "down" keys, are symbolised by arrows on the button.
201 * The "pickup" and "hangup" keys are symbolised by a green and red phone
202 * on the button.
203 */
204static int map_p1k_to_key(int scancode)
205{
206 switch(scancode) { /* phone key: */
207 case 0x23: return KEY_LEFT; /* IN */
208 case 0x33: return KEY_UP; /* up */
209 case 0x04: return KEY_RIGHT; /* OUT */
210 case 0x24: return KEY_DOWN; /* down */
211 case 0x03: return KEY_ENTER; /* pickup */
212 case 0x14: return KEY_BACKSPACE; /* C */
213 case 0x13: return KEY_ESC; /* hangup */
214 case 0x00: return KEY_1; /* 1 */
215 case 0x01: return KEY_2; /* 2 */
216 case 0x02: return KEY_3; /* 3 */
217 case 0x10: return KEY_4; /* 4 */
218 case 0x11: return KEY_5; /* 5 */
219 case 0x12: return KEY_6; /* 6 */
220 case 0x20: return KEY_7; /* 7 */
221 case 0x21: return KEY_8; /* 8 */
222 case 0x22: return KEY_9; /* 9 */
223 case 0x30: return KEY_KPASTERISK; /* * */
224 case 0x31: return KEY_0; /* 0 */
225 case 0x32: return KEY_LEFTSHIFT |
226 KEY_3 << 8; /* # */
227 }
228 return -EINVAL;
229}
230
231/* Completes a request by converting the data into events for the
232 * input subsystem.
233 *
234 * The key parameter can be cascaded: key2 << 8 | key1
235 */
236static void report_key(struct yealink_dev *yld, int key)
237{
238 struct input_dev *idev = yld->idev;
239
240 if (yld->key_code >= 0) {
241 /* old key up */
242 input_report_key(idev, yld->key_code & 0xff, 0);
243 if (yld->key_code >> 8)
244 input_report_key(idev, yld->key_code >> 8, 0);
245 }
246
247 yld->key_code = key;
248 if (key >= 0) {
249 /* new valid key */
250 input_report_key(idev, key & 0xff, 1);
251 if (key >> 8)
252 input_report_key(idev, key >> 8, 1);
253 }
254 input_sync(idev);
255}
256
257/*******************************************************************************
258 * Yealink usb communication interface
259 ******************************************************************************/
260
261static int yealink_cmd(struct yealink_dev *yld, struct yld_ctl_packet *p)
262{
263 u8 *buf = (u8 *)p;
264 int i;
265 u8 sum = 0;
266
267 for(i=0; i<USB_PKT_LEN-1; i++)
268 sum -= buf[i];
269 p->sum = sum;
270 return usb_control_msg(yld->udev,
271 usb_sndctrlpipe(yld->udev, 0),
272 USB_REQ_SET_CONFIGURATION,
273 USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
274 0x200, 3,
275 p, sizeof(*p),
276 USB_CTRL_SET_TIMEOUT);
277}
278
279static u8 default_ringtone[] = {
280 0xEF, /* volume [0-255] */
281 0xFB, 0x1E, 0x00, 0x0C, /* 1250 [hz], 12/100 [s] */
282 0xFC, 0x18, 0x00, 0x0C, /* 1000 [hz], 12/100 [s] */
283 0xFB, 0x1E, 0x00, 0x0C,
284 0xFC, 0x18, 0x00, 0x0C,
285 0xFB, 0x1E, 0x00, 0x0C,
286 0xFC, 0x18, 0x00, 0x0C,
287 0xFB, 0x1E, 0x00, 0x0C,
288 0xFC, 0x18, 0x00, 0x0C,
289 0xFF, 0xFF, 0x01, 0x90, /* silent, 400/100 [s] */
290 0x00, 0x00 /* end of sequence */
291};
292
293static int yealink_set_ringtone(struct yealink_dev *yld, u8 *buf, size_t size)
294{
295 struct yld_ctl_packet *p = yld->ctl_data;
296 int ix, len;
297
298 if (size <= 0)
299 return -EINVAL;
300
301 /* Set the ringtone volume */
302 memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data)));
303 yld->ctl_data->cmd = CMD_RING_VOLUME;
304 yld->ctl_data->size = 1;
305 yld->ctl_data->data[0] = buf[0];
306 yealink_cmd(yld, p);
307
308 buf++;
309 size--;
310
311 p->cmd = CMD_RING_NOTE;
312 ix = 0;
313 while (size != ix) {
314 len = size - ix;
315 if (len > sizeof(p->data))
316 len = sizeof(p->data);
317 p->size = len;
318 p->offset = cpu_to_be16(ix);
319 memcpy(p->data, &buf[ix], len);
320 yealink_cmd(yld, p);
321 ix += len;
322 }
323 return 0;
324}
325
326/* keep stat_master & stat_copy in sync.
327 */
328static int yealink_do_idle_tasks(struct yealink_dev *yld)
329{
330 u8 val;
331 int i, ix, len;
332
333 ix = yld->stat_ix;
334
335 memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data)));
336 yld->ctl_data->cmd = CMD_KEYPRESS;
337 yld->ctl_data->size = 1;
338 yld->ctl_data->sum = 0xff - CMD_KEYPRESS;
339
340 /* If state update pointer wraps do a KEYPRESS first. */
341 if (ix >= sizeof(yld->master)) {
342 yld->stat_ix = 0;
343 return 0;
344 }
345
346 /* find update candidates: copy != master */
347 do {
348 val = yld->master.b[ix];
349 if (val != yld->copy.b[ix])
350 goto send_update;
351 } while (++ix < sizeof(yld->master));
352
353 /* nothing todo, wait a bit and poll for a KEYPRESS */
354 yld->stat_ix = 0;
355 /* TODO how can we wait abit. ??
356 * msleep_interruptible(1000 / YEALINK_POLLING_FREQUENCY);
357 */
358 return 0;
359
360send_update:
361
362 /* Setup an appropriate update request */
363 yld->copy.b[ix] = val;
364 yld->ctl_data->data[0] = val;
365
366 switch(ix) {
367 case offsetof(struct yld_status, led):
368 yld->ctl_data->cmd = CMD_LED;
369 yld->ctl_data->sum = -1 - CMD_LED - val;
370 break;
371 case offsetof(struct yld_status, dialtone):
372 yld->ctl_data->cmd = CMD_DIALTONE;
373 yld->ctl_data->sum = -1 - CMD_DIALTONE - val;
374 break;
375 case offsetof(struct yld_status, ringtone):
376 yld->ctl_data->cmd = CMD_RINGTONE;
377 yld->ctl_data->sum = -1 - CMD_RINGTONE - val;
378 break;
379 case offsetof(struct yld_status, keynum):
380 val--;
381 val &= 0x1f;
382 yld->ctl_data->cmd = CMD_SCANCODE;
383 yld->ctl_data->offset = cpu_to_be16(val);
384 yld->ctl_data->data[0] = 0;
385 yld->ctl_data->sum = -1 - CMD_SCANCODE - val;
386 break;
387 default:
388 len = sizeof(yld->master.s.lcd) - ix;
389 if (len > sizeof(yld->ctl_data->data))
390 len = sizeof(yld->ctl_data->data);
391
392 /* Combine up to <len> consecutive LCD bytes in a singe request
393 */
394 yld->ctl_data->cmd = CMD_LCD;
395 yld->ctl_data->offset = cpu_to_be16(ix);
396 yld->ctl_data->size = len;
397 yld->ctl_data->sum = -CMD_LCD - ix - val - len;
398 for(i=1; i<len; i++) {
399 ix++;
400 val = yld->master.b[ix];
401 yld->copy.b[ix] = val;
402 yld->ctl_data->data[i] = val;
403 yld->ctl_data->sum -= val;
404 }
405 }
406 yld->stat_ix = ix + 1;
407 return 1;
408}
409
410/* Decide on how to handle responses
411 *
412 * The state transition diagram is somethhing like:
413 *
414 * syncState<--+
415 * | |
416 * | idle
417 * \|/ |
418 * init --ok--> waitForKey --ok--> getKey
419 * ^ ^ |
420 * | +-------ok-------+
421 * error,start
422 *
423 */
424static void urb_irq_callback(struct urb *urb)
425{
426 struct yealink_dev *yld = urb->context;
427 int ret;
428
429 if (urb->status)
430 err("%s - urb status %d", __FUNCTION__, urb->status);
431
432 switch (yld->irq_data->cmd) {
433 case CMD_KEYPRESS:
434
435 yld->master.s.keynum = yld->irq_data->data[0];
436 break;
437
438 case CMD_SCANCODE:
439 dbg("get scancode %x", yld->irq_data->data[0]);
440
441 report_key(yld, map_p1k_to_key(yld->irq_data->data[0]));
442 break;
443
444 default:
445 err("unexpected response %x", yld->irq_data->cmd);
446 }
447
448 yealink_do_idle_tasks(yld);
449
450 ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC);
451 if (ret)
452 err("%s - usb_submit_urb failed %d", __FUNCTION__, ret);
453}
454
455static void urb_ctl_callback(struct urb *urb)
456{
457 struct yealink_dev *yld = urb->context;
458 int ret;
459
460 if (urb->status)
461 err("%s - urb status %d", __FUNCTION__, urb->status);
462
463 switch (yld->ctl_data->cmd) {
464 case CMD_KEYPRESS:
465 case CMD_SCANCODE:
466 /* ask for a response */
467 ret = usb_submit_urb(yld->urb_irq, GFP_ATOMIC);
468 break;
469 default:
470 /* send new command */
471 yealink_do_idle_tasks(yld);
472 ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC);
473 }
474
475 if (ret)
476 err("%s - usb_submit_urb failed %d", __FUNCTION__, ret);
477}
478
479/*******************************************************************************
480 * input event interface
481 ******************************************************************************/
482
483/* TODO should we issue a ringtone on a SND_BELL event?
484static int input_ev(struct input_dev *dev, unsigned int type,
485 unsigned int code, int value)
486{
487
488 if (type != EV_SND)
489 return -EINVAL;
490
491 switch (code) {
492 case SND_BELL:
493 case SND_TONE:
494 break;
495 default:
496 return -EINVAL;
497 }
498
499 return 0;
500}
501*/
502
503static int input_open(struct input_dev *dev)
504{
505 struct yealink_dev *yld = input_get_drvdata(dev);
506 int i, ret;
507
508 dbg("%s", __FUNCTION__);
509
510 /* force updates to device */
511 for (i = 0; i<sizeof(yld->master); i++)
512 yld->copy.b[i] = ~yld->master.b[i];
513 yld->key_code = -1; /* no keys pressed */
514
515 yealink_set_ringtone(yld, default_ringtone, sizeof(default_ringtone));
516
517 /* issue INIT */
518 memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data)));
519 yld->ctl_data->cmd = CMD_INIT;
520 yld->ctl_data->size = 10;
521 yld->ctl_data->sum = 0x100-CMD_INIT-10;
522 if ((ret = usb_submit_urb(yld->urb_ctl, GFP_KERNEL)) != 0) {
523 dbg("%s - usb_submit_urb failed with result %d",
524 __FUNCTION__, ret);
525 return ret;
526 }
527 return 0;
528}
529
530static void input_close(struct input_dev *dev)
531{
532 struct yealink_dev *yld = input_get_drvdata(dev);
533
534 usb_kill_urb(yld->urb_ctl);
535 usb_kill_urb(yld->urb_irq);
536}
537
538/*******************************************************************************
539 * sysfs interface
540 ******************************************************************************/
541
542static DECLARE_RWSEM(sysfs_rwsema);
543
544/* Interface to the 7-segments translation table aka. char set.
545 */
546static ssize_t show_map(struct device *dev, struct device_attribute *attr,
547 char *buf)
548{
549 memcpy(buf, &map_seg7, sizeof(map_seg7));
550 return sizeof(map_seg7);
551}
552
553static ssize_t store_map(struct device *dev, struct device_attribute *attr,
554 const char *buf, size_t cnt)
555{
556 if (cnt != sizeof(map_seg7))
557 return -EINVAL;
558 memcpy(&map_seg7, buf, sizeof(map_seg7));
559 return sizeof(map_seg7);
560}
561
562/* Interface to the LCD.
563 */
564
565/* Reading /sys/../lineX will return the format string with its settings:
566 *
567 * Example:
568 * cat ./line3
569 * 888888888888
570 * Linux Rocks!
571 */
572static ssize_t show_line(struct device *dev, char *buf, int a, int b)
573{
574 struct yealink_dev *yld;
575 int i;
576
577 down_read(&sysfs_rwsema);
578 yld = dev_get_drvdata(dev);
579 if (yld == NULL) {
580 up_read(&sysfs_rwsema);
581 return -ENODEV;
582 }
583
584 for (i = a; i < b; i++)
585 *buf++ = lcdMap[i].type;
586 *buf++ = '\n';
587 for (i = a; i < b; i++)
588 *buf++ = yld->lcdMap[i];
589 *buf++ = '\n';
590 *buf = 0;
591
592 up_read(&sysfs_rwsema);
593 return 3 + ((b - a) << 1);
594}
595
596static ssize_t show_line1(struct device *dev, struct device_attribute *attr,
597 char *buf)
598{
599 return show_line(dev, buf, LCD_LINE1_OFFSET, LCD_LINE2_OFFSET);
600}
601
602static ssize_t show_line2(struct device *dev, struct device_attribute *attr,
603 char *buf)
604{
605 return show_line(dev, buf, LCD_LINE2_OFFSET, LCD_LINE3_OFFSET);
606}
607
608static ssize_t show_line3(struct device *dev, struct device_attribute *attr,
609 char *buf)
610{
611 return show_line(dev, buf, LCD_LINE3_OFFSET, LCD_LINE4_OFFSET);
612}
613
614/* Writing to /sys/../lineX will set the coresponding LCD line.
615 * - Excess characters are ignored.
616 * - If less characters are written than allowed, the remaining digits are
617 * unchanged.
618 * - The '\n' or '\t' char is a placeholder, it does not overwrite the
619 * original content.
620 */
621static ssize_t store_line(struct device *dev, const char *buf, size_t count,
622 int el, size_t len)
623{
624 struct yealink_dev *yld;
625 int i;
626
627 down_write(&sysfs_rwsema);
628 yld = dev_get_drvdata(dev);
629 if (yld == NULL) {
630 up_write(&sysfs_rwsema);
631 return -ENODEV;
632 }
633
634 if (len > count)
635 len = count;
636 for (i = 0; i < len; i++)
637 setChar(yld, el++, buf[i]);
638
639 up_write(&sysfs_rwsema);
640 return count;
641}
642
643static ssize_t store_line1(struct device *dev, struct device_attribute *attr,
644 const char *buf, size_t count)
645{
646 return store_line(dev, buf, count, LCD_LINE1_OFFSET, LCD_LINE1_SIZE);
647}
648
649static ssize_t store_line2(struct device *dev, struct device_attribute *attr,
650 const char *buf, size_t count)
651{
652 return store_line(dev, buf, count, LCD_LINE2_OFFSET, LCD_LINE2_SIZE);
653}
654
655static ssize_t store_line3(struct device *dev, struct device_attribute *attr,
656 const char *buf, size_t count)
657{
658 return store_line(dev, buf, count, LCD_LINE3_OFFSET, LCD_LINE3_SIZE);
659}
660
661/* Interface to visible and audible "icons", these include:
662 * pictures on the LCD, the LED, and the dialtone signal.
663 */
664
665/* Get a list of "switchable elements" with their current state. */
666static ssize_t get_icons(struct device *dev, struct device_attribute *attr,
667 char *buf)
668{
669 struct yealink_dev *yld;
670 int i, ret = 1;
671
672 down_read(&sysfs_rwsema);
673 yld = dev_get_drvdata(dev);
674 if (yld == NULL) {
675 up_read(&sysfs_rwsema);
676 return -ENODEV;
677 }
678
679 for (i = 0; i < ARRAY_SIZE(lcdMap); i++) {
680 if (lcdMap[i].type != '.')
681 continue;
682 ret += sprintf(&buf[ret], "%s %s\n",
683 yld->lcdMap[i] == ' ' ? " " : "on",
684 lcdMap[i].u.p.name);
685 }
686 up_read(&sysfs_rwsema);
687 return ret;
688}
689
690/* Change the visibility of a particular element. */
691static ssize_t set_icon(struct device *dev, const char *buf, size_t count,
692 int chr)
693{
694 struct yealink_dev *yld;
695 int i;
696
697 down_write(&sysfs_rwsema);
698 yld = dev_get_drvdata(dev);
699 if (yld == NULL) {
700 up_write(&sysfs_rwsema);
701 return -ENODEV;
702 }
703
704 for (i = 0; i < ARRAY_SIZE(lcdMap); i++) {
705 if (lcdMap[i].type != '.')
706 continue;
707 if (strncmp(buf, lcdMap[i].u.p.name, count) == 0) {
708 setChar(yld, i, chr);
709 break;
710 }
711 }
712
713 up_write(&sysfs_rwsema);
714 return count;
715}
716
717static ssize_t show_icon(struct device *dev, struct device_attribute *attr,
718 const char *buf, size_t count)
719{
720 return set_icon(dev, buf, count, buf[0]);
721}
722
723static ssize_t hide_icon(struct device *dev, struct device_attribute *attr,
724 const char *buf, size_t count)
725{
726 return set_icon(dev, buf, count, ' ');
727}
728
729/* Upload a ringtone to the device.
730 */
731
732/* Stores raw ringtone data in the phone */
733static ssize_t store_ringtone(struct device *dev,
734 struct device_attribute *attr,
735 const char *buf, size_t count)
736{
737 struct yealink_dev *yld;
738
739 down_write(&sysfs_rwsema);
740 yld = dev_get_drvdata(dev);
741 if (yld == NULL) {
742 up_write(&sysfs_rwsema);
743 return -ENODEV;
744 }
745
746 /* TODO locking with async usb control interface??? */
747 yealink_set_ringtone(yld, (char *)buf, count);
748 up_write(&sysfs_rwsema);
749 return count;
750}
751
752#define _M444 S_IRUGO
753#define _M664 S_IRUGO|S_IWUSR|S_IWGRP
754#define _M220 S_IWUSR|S_IWGRP
755
756static DEVICE_ATTR(map_seg7 , _M664, show_map , store_map );
757static DEVICE_ATTR(line1 , _M664, show_line1 , store_line1 );
758static DEVICE_ATTR(line2 , _M664, show_line2 , store_line2 );
759static DEVICE_ATTR(line3 , _M664, show_line3 , store_line3 );
760static DEVICE_ATTR(get_icons , _M444, get_icons , NULL );
761static DEVICE_ATTR(show_icon , _M220, NULL , show_icon );
762static DEVICE_ATTR(hide_icon , _M220, NULL , hide_icon );
763static DEVICE_ATTR(ringtone , _M220, NULL , store_ringtone);
764
765static struct attribute *yld_attributes[] = {
766 &dev_attr_line1.attr,
767 &dev_attr_line2.attr,
768 &dev_attr_line3.attr,
769 &dev_attr_get_icons.attr,
770 &dev_attr_show_icon.attr,
771 &dev_attr_hide_icon.attr,
772 &dev_attr_map_seg7.attr,
773 &dev_attr_ringtone.attr,
774 NULL
775};
776
777static struct attribute_group yld_attr_group = {
778 .attrs = yld_attributes
779};
780
781/*******************************************************************************
782 * Linux interface and usb initialisation
783 ******************************************************************************/
784
785struct driver_info {
786 char *name;
787};
788
789static const struct driver_info info_P1K = {
790 .name = "Yealink usb-p1k",
791};
792
793static const struct usb_device_id usb_table [] = {
794 {
795 .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
796 USB_DEVICE_ID_MATCH_INT_INFO,
797 .idVendor = 0x6993,
798 .idProduct = 0xb001,
799 .bInterfaceClass = USB_CLASS_HID,
800 .bInterfaceSubClass = 0,
801 .bInterfaceProtocol = 0,
802 .driver_info = (kernel_ulong_t)&info_P1K
803 },
804 { }
805};
806
807static int usb_cleanup(struct yealink_dev *yld, int err)
808{
809 if (yld == NULL)
810 return err;
811
812 usb_kill_urb(yld->urb_irq); /* parameter validation in core/urb */
813 usb_kill_urb(yld->urb_ctl); /* parameter validation in core/urb */
814
815 if (yld->idev) {
816 if (err)
817 input_free_device(yld->idev);
818 else
819 input_unregister_device(yld->idev);
820 }
821
822 usb_free_urb(yld->urb_irq);
823 usb_free_urb(yld->urb_ctl);
824
825 usb_buffer_free(yld->udev, sizeof(*(yld->ctl_req)),
826 yld->ctl_req, yld->ctl_req_dma);
827 usb_buffer_free(yld->udev, USB_PKT_LEN,
828 yld->ctl_data, yld->ctl_dma);
829 usb_buffer_free(yld->udev, USB_PKT_LEN,
830 yld->irq_data, yld->irq_dma);
831
832 kfree(yld);
833 return err;
834}
835
836static void usb_disconnect(struct usb_interface *intf)
837{
838 struct yealink_dev *yld;
839
840 down_write(&sysfs_rwsema);
841 yld = usb_get_intfdata(intf);
842 sysfs_remove_group(&intf->dev.kobj, &yld_attr_group);
843 usb_set_intfdata(intf, NULL);
844 up_write(&sysfs_rwsema);
845
846 usb_cleanup(yld, 0);
847}
848
849static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
850{
851 struct usb_device *udev = interface_to_usbdev (intf);
852 struct driver_info *nfo = (struct driver_info *)id->driver_info;
853 struct usb_host_interface *interface;
854 struct usb_endpoint_descriptor *endpoint;
855 struct yealink_dev *yld;
856 struct input_dev *input_dev;
857 int ret, pipe, i;
858
859 interface = intf->cur_altsetting;
860 endpoint = &interface->endpoint[0].desc;
861 if (!usb_endpoint_is_int_in(endpoint))
862 return -ENODEV;
863
864 yld = kzalloc(sizeof(struct yealink_dev), GFP_KERNEL);
865 if (!yld)
866 return -ENOMEM;
867
868 yld->udev = udev;
869
870 yld->idev = input_dev = input_allocate_device();
871 if (!input_dev)
872 return usb_cleanup(yld, -ENOMEM);
873
874 /* allocate usb buffers */
875 yld->irq_data = usb_buffer_alloc(udev, USB_PKT_LEN,
876 GFP_ATOMIC, &yld->irq_dma);
877 if (yld->irq_data == NULL)
878 return usb_cleanup(yld, -ENOMEM);
879
880 yld->ctl_data = usb_buffer_alloc(udev, USB_PKT_LEN,
881 GFP_ATOMIC, &yld->ctl_dma);
882 if (!yld->ctl_data)
883 return usb_cleanup(yld, -ENOMEM);
884
885 yld->ctl_req = usb_buffer_alloc(udev, sizeof(*(yld->ctl_req)),
886 GFP_ATOMIC, &yld->ctl_req_dma);
887 if (yld->ctl_req == NULL)
888 return usb_cleanup(yld, -ENOMEM);
889
890 /* allocate urb structures */
891 yld->urb_irq = usb_alloc_urb(0, GFP_KERNEL);
892 if (yld->urb_irq == NULL)
893 return usb_cleanup(yld, -ENOMEM);
894
895 yld->urb_ctl = usb_alloc_urb(0, GFP_KERNEL);
896 if (yld->urb_ctl == NULL)
897 return usb_cleanup(yld, -ENOMEM);
898
899 /* get a handle to the interrupt data pipe */
900 pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
901 ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
902 if (ret != USB_PKT_LEN)
903 err("invalid payload size %d, expected %zd", ret, USB_PKT_LEN);
904
905 /* initialise irq urb */
906 usb_fill_int_urb(yld->urb_irq, udev, pipe, yld->irq_data,
907 USB_PKT_LEN,
908 urb_irq_callback,
909 yld, endpoint->bInterval);
910 yld->urb_irq->transfer_dma = yld->irq_dma;
911 yld->urb_irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
912 yld->urb_irq->dev = udev;
913
914 /* initialise ctl urb */
915 yld->ctl_req->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE |
916 USB_DIR_OUT;
917 yld->ctl_req->bRequest = USB_REQ_SET_CONFIGURATION;
918 yld->ctl_req->wValue = cpu_to_le16(0x200);
919 yld->ctl_req->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber);
920 yld->ctl_req->wLength = cpu_to_le16(USB_PKT_LEN);
921
922 usb_fill_control_urb(yld->urb_ctl, udev, usb_sndctrlpipe(udev, 0),
923 (void *)yld->ctl_req, yld->ctl_data, USB_PKT_LEN,
924 urb_ctl_callback, yld);
925 yld->urb_ctl->setup_dma = yld->ctl_req_dma;
926 yld->urb_ctl->transfer_dma = yld->ctl_dma;
927 yld->urb_ctl->transfer_flags |= URB_NO_SETUP_DMA_MAP |
928 URB_NO_TRANSFER_DMA_MAP;
929 yld->urb_ctl->dev = udev;
930
931 /* find out the physical bus location */
932 usb_make_path(udev, yld->phys, sizeof(yld->phys));
933 strlcat(yld->phys, "/input0", sizeof(yld->phys));
934
935 /* register settings for the input device */
936 input_dev->name = nfo->name;
937 input_dev->phys = yld->phys;
938 usb_to_input_id(udev, &input_dev->id);
939 input_dev->dev.parent = &intf->dev;
940
941 input_set_drvdata(input_dev, yld);
942
943 input_dev->open = input_open;
944 input_dev->close = input_close;
945 /* input_dev->event = input_ev; TODO */
946
947 /* register available key events */
948 input_dev->evbit[0] = BIT(EV_KEY);
949 for (i = 0; i < 256; i++) {
950 int k = map_p1k_to_key(i);
951 if (k >= 0) {
952 set_bit(k & 0xff, input_dev->keybit);
953 if (k >> 8)
954 set_bit(k >> 8, input_dev->keybit);
955 }
956 }
957
958 ret = input_register_device(yld->idev);
959 if (ret)
960 return usb_cleanup(yld, ret);
961
962 usb_set_intfdata(intf, yld);
963
964 /* clear visible elements */
965 for (i = 0; i < ARRAY_SIZE(lcdMap); i++)
966 setChar(yld, i, ' ');
967
968 /* display driver version on LCD line 3 */
969 store_line3(&intf->dev, NULL,
970 DRIVER_VERSION, sizeof(DRIVER_VERSION));
971
972 /* Register sysfs hooks (don't care about failure) */
973 ret = sysfs_create_group(&intf->dev.kobj, &yld_attr_group);
974 return 0;
975}
976
977static struct usb_driver yealink_driver = {
978 .name = "yealink",
979 .probe = usb_probe,
980 .disconnect = usb_disconnect,
981 .id_table = usb_table,
982};
983
984static int __init yealink_dev_init(void)
985{
986 int ret = usb_register(&yealink_driver);
987 if (ret == 0)
988 info(DRIVER_DESC ":" DRIVER_VERSION);
989 return ret;
990}
991
992static void __exit yealink_dev_exit(void)
993{
994 usb_deregister(&yealink_driver);
995}
996
997module_init(yealink_dev_init);
998module_exit(yealink_dev_exit);
999
1000MODULE_DEVICE_TABLE (usb, usb_table);
1001
1002MODULE_AUTHOR(DRIVER_AUTHOR);
1003MODULE_DESCRIPTION(DRIVER_DESC);
1004MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/yealink.h b/drivers/input/misc/yealink.h
new file mode 100644
index 000000000000..48af0be9cbdf
--- /dev/null
+++ b/drivers/input/misc/yealink.h
@@ -0,0 +1,220 @@
1/*
2 * drivers/usb/input/yealink.h
3 *
4 * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
5 *
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21#ifndef INPUT_YEALINK_H
22#define INPUT_YEALINK_H
23
24/* Using the control channel on interface 3 various aspects of the phone
25 * can be controlled like LCD, LED, dialtone and the ringtone.
26 */
27
28struct yld_ctl_packet {
29 u8 cmd; /* command code, see below */
30 u8 size; /* 1-11, size of used data bytes. */
31 u16 offset; /* internal packet offset */
32 u8 data[11];
33 s8 sum; /* negative sum of 15 preceding bytes */
34} __attribute__ ((packed));
35
36#define USB_PKT_LEN sizeof(struct yld_ctl_packet)
37
38/* The following yld_ctl_packet's are available: */
39
40/* Init registers
41 *
42 * cmd 0x8e
43 * size 10
44 * offset 0
45 * data 0,0,0,0....
46 */
47#define CMD_INIT 0x8e
48
49/* Request key scan
50 *
51 * cmd 0x80
52 * size 1
53 * offset 0
54 * data[0] on return returns the key number, if it changes there's a new
55 * key pressed.
56 */
57#define CMD_KEYPRESS 0x80
58
59/* Request scancode
60 *
61 * cmd 0x81
62 * size 1
63 * offset key number [0-1f]
64 * data[0] on return returns the scancode
65 */
66#define CMD_SCANCODE 0x81
67
68/* Set LCD
69 *
70 * cmd 0x04
71 * size 1-11
72 * offset 0-23
73 * data segment bits
74 */
75#define CMD_LCD 0x04
76
77/* Set led
78 *
79 * cmd 0x05
80 * size 1
81 * offset 0
82 * data[0] 0 OFF / 1 ON
83 */
84#define CMD_LED 0x05
85
86/* Set ringtone volume
87 *
88 * cmd 0x11
89 * size 1
90 * offset 0
91 * data[0] 0-0xff volume
92 */
93#define CMD_RING_VOLUME 0x11
94
95/* Set ringtone notes
96 *
97 * cmd 0x02
98 * size 1-11
99 * offset 0->
100 * data binary representation LE16(-freq), LE16(duration) ....
101 */
102#define CMD_RING_NOTE 0x02
103
104/* Sound ringtone via the speaker on the back
105 *
106 * cmd 0x03
107 * size 1
108 * offset 0
109 * data[0] 0 OFF / 0x24 ON
110 */
111#define CMD_RINGTONE 0x03
112
113/* Sound dial tone via the ear speaker
114 *
115 * cmd 0x09
116 * size 1
117 * offset 0
118 * data[0] 0 OFF / 1 ON
119 */
120#define CMD_DIALTONE 0x09
121
122#endif /* INPUT_YEALINK_H */
123
124
125#if defined(_SEG) && defined(_PIC)
126/* This table maps the LCD segments onto individual bit positions in the
127 * yld_status struct.
128 */
129
130/* LCD, each segment must be driven seperately.
131 *
132 * Layout:
133 *
134 * |[] [][] [][] [][] in |[][]
135 * |[] M [][] D [][] : [][] out |[][]
136 * store
137 *
138 * NEW REP SU MO TU WE TH FR SA
139 *
140 * [] [] [] [] [] [] [] [] [] [] [] []
141 * [] [] [] [] [] [] [] [] [] [] [] []
142 */
143
144/* Line 1
145 * Format : 18.e8.M8.88...188
146 * Icon names : M D : IN OUT STORE
147 */
148#define LCD_LINE1_OFFSET 0
149#define LCD_LINE1_SIZE 17
150
151/* Note: first g then f => ! ! */
152/* _SEG( type a b c d e g f ) */
153 _SEG('1', 0,0 , 22,2 , 22,2 , 0,0 , 0,0 , 0,0 , 0,0 ),
154 _SEG('8', 20,1 , 20,2 , 20,4 , 20,8 , 21,4 , 21,2 , 21,1 ),
155 _PIC('.', 22,1 , "M" ),
156 _SEG('e', 18,1 , 18,2 , 18,4 , 18,1 , 19,2 , 18,1 , 19,1 ),
157 _SEG('8', 16,1 , 16,2 , 16,4 , 16,8 , 17,4 , 17,2 , 17,1 ),
158 _PIC('.', 15,8 , "D" ),
159 _SEG('M', 14,1 , 14,2 , 14,4 , 14,1 , 15,4 , 15,2 , 15,1 ),
160 _SEG('8', 12,1 , 12,2 , 12,4 , 12,8 , 13,4 , 13,2 , 13,1 ),
161 _PIC('.', 11,8 , ":" ),
162 _SEG('8', 10,1 , 10,2 , 10,4 , 10,8 , 11,4 , 11,2 , 11,1 ),
163 _SEG('8', 8,1 , 8,2 , 8,4 , 8,8 , 9,4 , 9,2 , 9,1 ),
164 _PIC('.', 7,1 , "IN" ),
165 _PIC('.', 7,2 , "OUT" ),
166 _PIC('.', 7,4 , "STORE" ),
167 _SEG('1', 0,0 , 5,1 , 5,1 , 0,0 , 0,0 , 0,0 , 0,0 ),
168 _SEG('8', 4,1 , 4,2 , 4,4 , 4,8 , 5,8 , 5,4 , 5,2 ),
169 _SEG('8', 2,1 , 2,2 , 2,4 , 2,8 , 3,4 , 3,2 , 3,1 ),
170
171/* Line 2
172 * Format : .........
173 * Pict. name : NEW REP SU MO TU WE TH FR SA
174 */
175#define LCD_LINE2_OFFSET LCD_LINE1_OFFSET + LCD_LINE1_SIZE
176#define LCD_LINE2_SIZE 9
177
178 _PIC('.', 23,2 , "NEW" ),
179 _PIC('.', 23,4 , "REP" ),
180 _PIC('.', 1,8 , "SU" ),
181 _PIC('.', 1,4 , "MO" ),
182 _PIC('.', 1,2 , "TU" ),
183 _PIC('.', 1,1 , "WE" ),
184 _PIC('.', 0,1 , "TH" ),
185 _PIC('.', 0,2 , "FR" ),
186 _PIC('.', 0,4 , "SA" ),
187
188/* Line 3
189 * Format : 888888888888
190 */
191#define LCD_LINE3_OFFSET LCD_LINE2_OFFSET + LCD_LINE2_SIZE
192#define LCD_LINE3_SIZE 12
193
194 _SEG('8', 22,16, 22,32, 22,64, 22,128, 23,128, 23,64, 23,32 ),
195 _SEG('8', 20,16, 20,32, 20,64, 20,128, 21,128, 21,64, 21,32 ),
196 _SEG('8', 18,16, 18,32, 18,64, 18,128, 19,128, 19,64, 19,32 ),
197 _SEG('8', 16,16, 16,32, 16,64, 16,128, 17,128, 17,64, 17,32 ),
198 _SEG('8', 14,16, 14,32, 14,64, 14,128, 15,128, 15,64, 15,32 ),
199 _SEG('8', 12,16, 12,32, 12,64, 12,128, 13,128, 13,64, 13,32 ),
200 _SEG('8', 10,16, 10,32, 10,64, 10,128, 11,128, 11,64, 11,32 ),
201 _SEG('8', 8,16, 8,32, 8,64, 8,128, 9,128, 9,64, 9,32 ),
202 _SEG('8', 6,16, 6,32, 6,64, 6,128, 7,128, 7,64, 7,32 ),
203 _SEG('8', 4,16, 4,32, 4,64, 4,128, 5,128, 5,64, 5,32 ),
204 _SEG('8', 2,16, 2,32, 2,64, 2,128, 3,128, 3,64, 3,32 ),
205 _SEG('8', 0,16, 0,32, 0,64, 0,128, 1,128, 1,64, 1,32 ),
206
207/* Line 4
208 *
209 * The LED, DIALTONE and RINGTONE are implemented as icons and use the same
210 * sysfs interface.
211 */
212#define LCD_LINE4_OFFSET LCD_LINE3_OFFSET + LCD_LINE3_SIZE
213
214 _PIC('.', offsetof(struct yld_status, led) , 0x01, "LED" ),
215 _PIC('.', offsetof(struct yld_status, dialtone) , 0x01, "DIALTONE" ),
216 _PIC('.', offsetof(struct yld_status, ringtone) , 0x24, "RINGTONE" ),
217
218#undef _SEG
219#undef _PIC
220#endif /* _SEG && _PIC */
generated by cgit v1.2.2 (git 2.25.0) at 2024-09-24 13:19:05 -0400