5 files changed, 87 insertions, 38 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 0c9f4b158ff0..61834ae282e1 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -540,62 +540,62 @@ config TOUCHSCREEN_MC13783
 
 config TOUCHSCREEN_USB_EGALAX
         default y
-        bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
+        bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
         depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_PANJIT
         default y
-        bool "PanJit device support" if EMBEDDED
+        bool "PanJit device support" if EXPERT
         depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_3M
         default y
-        bool "3M/Microtouch EX II series device support" if EMBEDDED
+        bool "3M/Microtouch EX II series device support" if EXPERT
         depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_ITM
         default y
-        bool "ITM device support" if EMBEDDED
+        bool "ITM device support" if EXPERT
         depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_ETURBO
         default y
-        bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
+        bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
         depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_GUNZE
         default y
-        bool "Gunze AHL61 device support" if EMBEDDED
+        bool "Gunze AHL61 device support" if EXPERT
         depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_DMC_TSC10
         default y
-        bool "DMC TSC-10/25 device support" if EMBEDDED
+        bool "DMC TSC-10/25 device support" if EXPERT
         depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_IRTOUCH
         default y
-        bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
+        bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
         depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_IDEALTEK
         default y
-        bool "IdealTEK URTC1000 device support" if EMBEDDED
+        bool "IdealTEK URTC1000 device support" if EXPERT
         depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_GENERAL_TOUCH
         default y
-        bool "GeneralTouch Touchscreen device support" if EMBEDDED
+        bool "GeneralTouch Touchscreen device support" if EXPERT
         depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_GOTOP
         default y
-        bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
+        bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
         depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_JASTEC
         default y
-        bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EMBEDDED
+        bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
         depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_E2I
@@ -605,17 +605,17 @@ config TOUCHSCREEN_USB_E2I
 
 config TOUCHSCREEN_USB_ZYTRONIC
         default y
-        bool "Zytronic controller" if EMBEDDED
+        bool "Zytronic controller" if EXPERT
         depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_ETT_TC45USB
         default y
-        bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EMBEDDED
+        bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
         depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_NEXIO
         default y
-        bool "NEXIO/iNexio device support" if EMBEDDED
+        bool "NEXIO/iNexio device support" if EXPERT
         depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_TOUCHIT213
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 14ea54b78e46..4bf2316e3284 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -941,28 +941,29 @@ static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads784
         struct ads7846_platform_data *pdata = spi->dev.platform_data;
         int err;
 
-        /* REVISIT when the irq can be triggered active-low, or if for some
+        /*
+         * REVISIT when the irq can be triggered active-low, or if for some
          * reason the touchscreen isn't hooked up, we don't need to access
          * the pendown state.
          */
-        if (!pdata->get_pendown_state && !gpio_is_valid(pdata->gpio_pendown)) {
-                dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
-                return -EINVAL;
-        }
 
         if (pdata->get_pendown_state) {
                 ts->get_pendown_state = pdata->get_pendown_state;
-                return 0;
-        }
+        } else if (gpio_is_valid(pdata->gpio_pendown)) {
 
-        err = gpio_request(pdata->gpio_pendown, "ads7846_pendown");
-        if (err) {
-                dev_err(&spi->dev, "failed to request pendown GPIO%d\n",
-                        pdata->gpio_pendown);
-                return err;
-        }
+                err = gpio_request(pdata->gpio_pendown, "ads7846_pendown");
+                if (err) {
+                        dev_err(&spi->dev, "failed to request pendown GPIO%d\n",
+                                pdata->gpio_pendown);
+                        return err;
+                }
 
-        ts->gpio_pendown = pdata->gpio_pendown;
+                ts->gpio_pendown = pdata->gpio_pendown;
+
+        } else {
+                dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
+                return -EINVAL;
+        }
 
         return 0;
 }
@@ -1353,7 +1354,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
  err_put_regulator:
         regulator_put(ts->reg);
  err_free_gpio:
-        if (ts->gpio_pendown != -1)
+        if (!ts->get_pendown_state)
                 gpio_free(ts->gpio_pendown);
  err_cleanup_filter:
         if (ts->filter_cleanup)
@@ -1383,8 +1384,13 @@ static int __devexit ads7846_remove(struct spi_device *spi)
         regulator_disable(ts->reg);
         regulator_put(ts->reg);
 
-        if (ts->gpio_pendown != -1)
+        if (!ts->get_pendown_state) {
+                /*
+                 * If we are not using specialized pendown method we must
+                 * have been relying on gpio we set up ourselves.
+                 */
                 gpio_free(ts->gpio_pendown);
+        }
 
         if (ts->filter_cleanup)
                 ts->filter_cleanup(ts->filter_data);
diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c
index f7fa9ef4cd65..1507ce108d5b 100644
--- a/drivers/input/touchscreen/bu21013_ts.c
+++ b/drivers/input/touchscreen/bu21013_ts.c
@@ -12,6 +12,7 @@
 #include <linux/input.h>
 #include <linux/input/bu21013.h>
 #include <linux/slab.h>
+#include <linux/regulator/consumer.h>
 
 #define PEN_DOWN_INTR   0
 #define MAX_FINGERS     2
@@ -139,6 +140,7 @@
  * @chip: pointer to the touch panel controller
  * @in_dev: pointer to the input device structure
  * @intr_pin: interrupt pin value
+ * @regulator: pointer to the Regulator used for touch screen
  *
  * Touch panel device data structure
  */
@@ -149,6 +151,7 @@ struct bu21013_ts_data {
         const struct bu21013_platform_device *chip;
         struct input_dev *in_dev;
         unsigned int intr_pin;
+        struct regulator *regulator;
 };
 
 /**
@@ -456,6 +459,20 @@ static int __devinit bu21013_probe(struct i2c_client *client,
         bu21013_data->in_dev = in_dev;
         bu21013_data->chip = pdata;
         bu21013_data->client = client;
+
+        bu21013_data->regulator = regulator_get(&client->dev, "V-TOUCH");
+        if (IS_ERR(bu21013_data->regulator)) {
+                dev_err(&client->dev, "regulator_get failed\n");
+                error = PTR_ERR(bu21013_data->regulator);
+                goto err_free_mem;
+        }
+
+        error = regulator_enable(bu21013_data->regulator);
+        if (error < 0) {
+                dev_err(&client->dev, "regulator enable failed\n");
+                goto err_put_regulator;
+        }
+
         bu21013_data->touch_stopped = false;
         init_waitqueue_head(&bu21013_data->wait);
 
@@ -464,7 +481,7 @@ static int __devinit bu21013_probe(struct i2c_client *client,
                 error = pdata->cs_en(pdata->cs_pin);
                 if (error < 0) {
                         dev_err(&client->dev, "chip init failed\n");
-                        goto err_free_mem;
+                        goto err_disable_regulator;
                 }
         }
 
@@ -485,9 +502,9 @@ static int __devinit bu21013_probe(struct i2c_client *client,
         __set_bit(EV_ABS, in_dev->evbit);
 
         input_set_abs_params(in_dev, ABS_MT_POSITION_X, 0,
-                                                pdata->x_max_res, 0, 0);
+                                                pdata->touch_x_max, 0, 0);
         input_set_abs_params(in_dev, ABS_MT_POSITION_Y, 0,
-                                                pdata->y_max_res, 0, 0);
+                                                pdata->touch_y_max, 0, 0);
         input_set_drvdata(in_dev, bu21013_data);
 
         error = request_threaded_irq(pdata->irq, NULL, bu21013_gpio_irq,
@@ -513,6 +530,10 @@ err_free_irq:
         bu21013_free_irq(bu21013_data);
 err_cs_disable:
         pdata->cs_dis(pdata->cs_pin);
+err_disable_regulator:
+        regulator_disable(bu21013_data->regulator);
+err_put_regulator:
+        regulator_put(bu21013_data->regulator);
 err_free_mem:
         input_free_device(in_dev);
         kfree(bu21013_data);
@@ -535,6 +556,10 @@ static int __devexit bu21013_remove(struct i2c_client *client)
         bu21013_data->chip->cs_dis(bu21013_data->chip->cs_pin);
 
         input_unregister_device(bu21013_data->in_dev);
+
+        regulator_disable(bu21013_data->regulator);
+        regulator_put(bu21013_data->regulator);
+
         kfree(bu21013_data);
 
         device_init_wakeup(&client->dev, false);
@@ -561,6 +586,8 @@ static int bu21013_suspend(struct device *dev)
         else
                 disable_irq(bu21013_data->chip->irq);
 
+        regulator_disable(bu21013_data->regulator);
+
         return 0;
 }
 
@@ -577,6 +604,12 @@ static int bu21013_resume(struct device *dev)
         struct i2c_client *client = bu21013_data->client;
         int retval;
 
+        retval = regulator_enable(bu21013_data->regulator);
+        if (retval < 0) {
+                dev_err(&client->dev, "bu21013 regulator enable failed\n");
+                return retval;
+        }
+
         retval = bu21013_init_chip(bu21013_data);
         if (retval < 0) {
                 dev_err(&client->dev, "bu21013 controller config failed\n");
diff --git a/drivers/input/touchscreen/tnetv107x-ts.c b/drivers/input/touchscreen/tnetv107x-ts.c
index cf1dba2e267c..22a3411e93c5 100644
--- a/drivers/input/touchscreen/tnetv107x-ts.c
+++ b/drivers/input/touchscreen/tnetv107x-ts.c
@@ -14,6 +14,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/input.h>
 #include <linux/platform_device.h>
@@ -289,9 +290,9 @@ static int __devinit tsc_probe(struct platform_device *pdev)
         }
 
         ts->clk = clk_get(dev, NULL);
-        if (!ts->clk) {
+        if (IS_ERR(ts->clk)) {
                 dev_err(dev, "cannot claim device clock\n");
-                error = -EINVAL;
+                error = PTR_ERR(ts->clk);
                 goto error_clk;
         }
 
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index 5cb8449c909d..c14412ef4648 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -51,6 +51,10 @@ MODULE_LICENSE("GPL");
 #define W8001_PKTLEN_TPCCTL     11      /* control packet */
 #define W8001_PKTLEN_TOUCH2FG   13
 
+/* resolution in points/mm */
+#define W8001_PEN_RESOLUTION    100
+#define W8001_TOUCH_RESOLUTION  10
+
 struct w8001_coord {
         u8 rdy;
         u8 tsw;
@@ -198,7 +202,7 @@ static void parse_touchquery(u8 *data, struct w8001_touch_query *query)
                 query->y = 1024;
                 if (query->panel_res)
                         query->x = query->y = (1 << query->panel_res);
-                query->panel_res = 10;
+                query->panel_res = W8001_TOUCH_RESOLUTION;
         }
 }
 
@@ -394,6 +398,8 @@ static int w8001_setup(struct w8001 *w8001)
 
                 input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
                 input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
+                input_abs_set_res(dev, ABS_X, W8001_PEN_RESOLUTION);
+                input_abs_set_res(dev, ABS_Y, W8001_PEN_RESOLUTION);
                 input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
                 if (coord.tilt_x && coord.tilt_y) {
                         input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
@@ -418,14 +424,17 @@ static int w8001_setup(struct w8001 *w8001)
                 w8001->max_touch_x = touch.x;
                 w8001->max_touch_y = touch.y;
 
-                /* scale to pen maximum */
                 if (w8001->max_pen_x && w8001->max_pen_y) {
+                        /* if pen is supported scale to pen maximum */
                         touch.x = w8001->max_pen_x;
                         touch.y = w8001->max_pen_y;
+                        touch.panel_res = W8001_PEN_RESOLUTION;
                 }
 
                 input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0);
                 input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0);
+                input_abs_set_res(dev, ABS_X, touch.panel_res);
+                input_abs_set_res(dev, ABS_Y, touch.panel_res);
 
                 switch (touch.sensor_id) {
                 case 0: