2 files changed, 264 insertions, 2 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index dfafc76da4fb..a1e2d845f680 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -537,6 +537,11 @@ config TOUCHSCREEN_USB_ETT_TC5UH
         bool "ET&T TC5UH touchscreen controler support" if EMBEDDED
         depends on TOUCHSCREEN_USB_COMPOSITE
 
+config TOUCHSCREEN_USB_NEXIO
+        default y
+        bool "NEXIO/iNexio device support" if EMBEDDED
+        depends on TOUCHSCREEN_USB_COMPOSITE
+
 config TOUCHSCREEN_TOUCHIT213
         tristate "Sahara TouchIT-213 touchscreen"
         select SERIO
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index a2a82351a42f..07656efee654 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -15,6 +15,7 @@
  *  - GoTop Super_Q2/GogoPen/PenPower tablets
  *  - JASTEC USB touch controller/DigiTech DTR-02U
  *  - Zytronic capacitive touchscreen
+ *  - NEXIO/iNexio
  *
  * Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch>
  * Copyright (C) by Todd E. Johnson (mtouchusb.c)
@@ -95,6 +96,7 @@ struct usbtouch_device_info {
 
         int  (*read_data)   (struct usbtouch_usb *usbtouch, unsigned char *pkt);
         int  (*init)        (struct usbtouch_usb *usbtouch);
+        void (*exit)        (struct usbtouch_usb *usbtouch);
 };
 
 /* a usbtouch device */
@@ -109,6 +111,7 @@ struct usbtouch_usb {
         struct usbtouch_device_info *type;
         char name[128];
         char phys[64];
+        void *priv;
 
         int x, y;
         int touch, press;
@@ -133,6 +136,7 @@ enum {
         DEVTYPE_E2I,
         DEVTYPE_ZYTRONIC,
         DEVTYPE_TC5UH,
+        DEVTYPE_NEXIO,
 };
 
 #define USB_DEVICE_HID_CLASS(vend, prod) \
@@ -222,6 +226,14 @@ static const struct usb_device_id usbtouch_devices[] = {
         {USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC5UH},
 #endif
 
+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+        /* data interface only */
+        {USB_DEVICE_AND_INTERFACE_INFO(0x10f0, 0x2002, 0x0a, 0x00, 0x00),
+                .driver_info = DEVTYPE_NEXIO},
+        {USB_DEVICE_AND_INTERFACE_INFO(0x1870, 0x0001, 0x0a, 0x00, 0x00),
+                .driver_info = DEVTYPE_NEXIO},
+#endif
+
         {}
 };
 
@@ -692,6 +704,229 @@ static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 #endif
 
 /*****************************************************************************
+ * NEXIO Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+
+#define NEXIO_TIMEOUT   5000
+#define NEXIO_BUFSIZE   1024
+#define NEXIO_THRESHOLD 50
+
+struct nexio_priv {
+        struct urb *ack;
+        unsigned char *ack_buf;
+};
+
+struct nexio_touch_packet {
+        u8      flags;          /* 0xe1 = touch, 0xe1 = release */
+        __be16  data_len;       /* total bytes of touch data */
+        __be16  x_len;          /* bytes for X axis */
+        __be16  y_len;          /* bytes for Y axis */
+        u8      data[];
+} __attribute__ ((packed));
+
+static unsigned char nexio_ack_pkt[2] = { 0xaa, 0x02 };
+static unsigned char nexio_init_pkt[4] = { 0x82, 0x04, 0x0a, 0x0f };
+
+static void nexio_ack_complete(struct urb *urb)
+{
+}
+
+static int nexio_init(struct usbtouch_usb *usbtouch)
+{
+        struct usb_device *dev = interface_to_usbdev(usbtouch->interface);
+        struct usb_host_interface *interface = usbtouch->interface->cur_altsetting;
+        struct nexio_priv *priv;
+        int ret = -ENOMEM;
+        int actual_len, i;
+        unsigned char *buf;
+        char *firmware_ver = NULL, *device_name = NULL;
+        int input_ep = 0, output_ep = 0;
+
+        /* find first input and output endpoint */
+        for (i = 0; i < interface->desc.bNumEndpoints; i++) {
+                if (!input_ep &&
+                    usb_endpoint_dir_in(&interface->endpoint[i].desc))
+                        input_ep = interface->endpoint[i].desc.bEndpointAddress;
+                if (!output_ep &&
+                    usb_endpoint_dir_out(&interface->endpoint[i].desc))
+                        output_ep = interface->endpoint[i].desc.bEndpointAddress;
+        }
+        if (!input_ep || !output_ep)
+                return -ENXIO;
+
+        buf = kmalloc(NEXIO_BUFSIZE, GFP_KERNEL);
+        if (!buf)
+                goto out_buf;
+
+        /* two empty reads */
+        for (i = 0; i < 2; i++) {
+                ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep),
+                                   buf, NEXIO_BUFSIZE, &actual_len,
+                                   NEXIO_TIMEOUT);
+                if (ret < 0)
+                        goto out_buf;
+        }
+
+        /* send init command */
+        memcpy(buf, nexio_init_pkt, sizeof(nexio_init_pkt));
+        ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, output_ep),
+                           buf, sizeof(nexio_init_pkt), &actual_len,
+                           NEXIO_TIMEOUT);
+        if (ret < 0)
+                goto out_buf;
+
+        /* read replies */
+        for (i = 0; i < 3; i++) {
+                memset(buf, 0, NEXIO_BUFSIZE);
+                ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep),
+                                   buf, NEXIO_BUFSIZE, &actual_len,
+                                   NEXIO_TIMEOUT);
+                if (ret < 0 || actual_len < 1 || buf[1] != actual_len)
+                        continue;
+                switch (buf[0]) {
+                case 0x83:      /* firmware version */
+                        if (!firmware_ver)
+                                firmware_ver = kstrdup(&buf[2], GFP_KERNEL);
+                        break;
+                case 0x84:      /* device name */
+                        if (!device_name)
+                                device_name = kstrdup(&buf[2], GFP_KERNEL);
+                        break;
+                }
+        }
+
+        printk(KERN_INFO "Nexio device: %s, firmware version: %s\n",
+               device_name, firmware_ver);
+
+        kfree(firmware_ver);
+        kfree(device_name);
+
+        /* prepare ACK URB */
+        ret = -ENOMEM;
+
+        usbtouch->priv = kmalloc(sizeof(struct nexio_priv), GFP_KERNEL);
+        if (!usbtouch->priv)
+                goto out_buf;
+
+        priv = usbtouch->priv;
+
+        priv->ack_buf = kmalloc(sizeof(nexio_ack_pkt), GFP_KERNEL);
+        if (!priv->ack_buf)
+                goto err_priv;
+
+        memcpy(priv->ack_buf, nexio_ack_pkt, sizeof(nexio_ack_pkt));
+
+        priv->ack = usb_alloc_urb(0, GFP_KERNEL);
+        if (!priv->ack) {
+                dbg("%s - usb_alloc_urb failed: usbtouch->ack", __func__);
+                goto err_ack_buf;
+        }
+
+        usb_fill_bulk_urb(priv->ack, dev, usb_sndbulkpipe(dev, output_ep),
+                          priv->ack_buf, sizeof(nexio_ack_pkt),
+                          nexio_ack_complete, usbtouch);
+        ret = 0;
+        goto out_buf;
+
+err_ack_buf:
+        kfree(priv->ack_buf);
+err_priv:
+        kfree(priv);
+out_buf:
+        kfree(buf);
+        return ret;
+}
+
+static void nexio_exit(struct usbtouch_usb *usbtouch)
+{
+        struct nexio_priv *priv = usbtouch->priv;
+
+        usb_kill_urb(priv->ack);
+        usb_free_urb(priv->ack);
+        kfree(priv->ack_buf);
+        kfree(priv);
+}
+
+static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt)
+{
+        int x, y, begin_x, begin_y, end_x, end_y, w, h, ret;
+        struct nexio_touch_packet *packet = (void *) pkt;
+        struct nexio_priv *priv = usbtouch->priv;
+
+        /* got touch data? */
+        if ((pkt[0] & 0xe0) != 0xe0)
+                return 0;
+
+        /* send ACK */
+        ret = usb_submit_urb(priv->ack, GFP_ATOMIC);
+
+        if (!usbtouch->type->max_xc) {
+                usbtouch->type->max_xc = 2 * be16_to_cpu(packet->x_len);
+                input_set_abs_params(usbtouch->input, ABS_X, 0,
+                                     2 * be16_to_cpu(packet->x_len), 0, 0);
+                usbtouch->type->max_yc = 2 * be16_to_cpu(packet->y_len);
+                input_set_abs_params(usbtouch->input, ABS_Y, 0,
+                                     2 * be16_to_cpu(packet->y_len), 0, 0);
+        }
+        /*
+         * The device reports state of IR sensors on X and Y axes.
+         * Each byte represents "darkness" percentage (0-100) of one element.
+         * 17" touchscreen reports only 64 x 52 bytes so the resolution is low.
+         * This also means that there's a limited multi-touch capability but
+         * it's disabled (and untested) here as there's no X driver for that.
+         */
+        begin_x = end_x = begin_y = end_y = -1;
+        for (x = 0; x < be16_to_cpu(packet->x_len); x++) {
+                if (begin_x == -1 && packet->data[x] > NEXIO_THRESHOLD) {
+                        begin_x = x;
+                        continue;
+                }
+                if (end_x == -1 && begin_x != -1 && packet->data[x] < NEXIO_THRESHOLD) {
+                        end_x = x - 1;
+                        for (y = be16_to_cpu(packet->x_len);
+                             y < be16_to_cpu(packet->data_len); y++) {
+                                if (begin_y == -1 && packet->data[y] > NEXIO_THRESHOLD) {
+                                        begin_y = y - be16_to_cpu(packet->x_len);
+                                        continue;
+                                }
+                                if (end_y == -1 &&
+                                    begin_y != -1 && packet->data[y] < NEXIO_THRESHOLD) {
+                                        end_y = y - 1 - be16_to_cpu(packet->x_len);
+                                        w = end_x - begin_x;
+                                        h = end_y - begin_y;
+#if 0
+                                        /* multi-touch */
+                                        input_report_abs(usbtouch->input,
+                                                    ABS_MT_TOUCH_MAJOR, max(w,h));
+                                        input_report_abs(usbtouch->input,
+                                                    ABS_MT_TOUCH_MINOR, min(x,h));
+                                        input_report_abs(usbtouch->input,
+                                                    ABS_MT_POSITION_X, 2*begin_x+w);
+                                        input_report_abs(usbtouch->input,
+                                                    ABS_MT_POSITION_Y, 2*begin_y+h);
+                                        input_report_abs(usbtouch->input,
+                                                    ABS_MT_ORIENTATION, w > h);
+                                        input_mt_sync(usbtouch->input);
+#endif
+                                        /* single touch */
+                                        usbtouch->x = 2 * begin_x + w;
+                                        usbtouch->y = 2 * begin_y + h;
+                                        usbtouch->touch = packet->flags & 0x01;
+                                        begin_y = end_y = -1;
+                                        return 1;
+                                }
+                        }
+                        begin_x = end_x = -1;
+                }
+
+        }
+        return 0;
+}
+#endif
+
+
+/*****************************************************************************
  * the different device descriptors
  */
 #ifdef MULTI_PACKET
@@ -875,6 +1110,16 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
                 .read_data      = tc5uh_read_data,
         },
 #endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+        [DEVTYPE_NEXIO] = {
+                .rept_size      = 128,
+                .irq_always     = true,
+                .read_data      = nexio_read_data,
+                .init           = nexio_init,
+                .exit           = nexio_exit,
+        },
+#endif
 };
 
 
@@ -1000,6 +1245,7 @@ static void usbtouch_irq(struct urb *urb)
         case -ECONNRESET:
         case -ENOENT:
         case -ESHUTDOWN:
+        case -EPIPE:
                 /* this urb is terminated, clean up */
                 dbg("%s - urb shutting down with status: %d",
                     __func__, urb->status);
@@ -1146,10 +1392,16 @@ static int usbtouch_probe(struct usb_interface *intf,
                 input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press,
                                      type->max_press, 0, 0);
 
-        usb_fill_int_urb(usbtouch->irq, udev,
+        if (usb_endpoint_type(endpoint) == USB_ENDPOINT_XFER_INT)
+                usb_fill_int_urb(usbtouch->irq, udev,
                          usb_rcvintpipe(udev, endpoint->bEndpointAddress),
                          usbtouch->data, type->rept_size,
                          usbtouch_irq, usbtouch, endpoint->bInterval);
+        else
+                usb_fill_bulk_urb(usbtouch->irq, udev,
+                         usb_rcvbulkpipe(udev, endpoint->bEndpointAddress),
+                         usbtouch->data, type->rept_size,
+                         usbtouch_irq, usbtouch);
 
         usbtouch->irq->dev = udev;
         usbtouch->irq->transfer_dma = usbtouch->data_dma;
@@ -1167,7 +1419,7 @@ static int usbtouch_probe(struct usb_interface *intf,
         err = input_register_device(usbtouch->input);
         if (err) {
                 dbg("%s - input_register_device failed, err: %d", __func__, err);
-                goto out_free_buffers;
+                goto out_do_exit;
         }
 
         usb_set_intfdata(intf, usbtouch);
@@ -1177,6 +1429,9 @@ static int usbtouch_probe(struct usb_interface *intf,
 
         return 0;
 
+out_do_exit:
+        if (type->exit)
+                type->exit(usbtouch);
 out_free_buffers:
         usbtouch_free_buffers(udev, usbtouch);
 out_free:
@@ -1199,6 +1454,8 @@ static void usbtouch_disconnect(struct usb_interface *intf)
         /* this will stop IO via close */
         input_unregister_device(usbtouch->input);
         usb_free_urb(usbtouch->irq);
+        if (usbtouch->type->exit)
+                usbtouch->type->exit(usbtouch);
         usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch);
         kfree(usbtouch);
 }