diff options
Diffstat (limited to 'drivers/input/mouse/pxa930_trkball.c')
-rw-r--r-- | drivers/input/mouse/pxa930_trkball.c | 269 |
1 files changed, 269 insertions, 0 deletions
diff --git a/drivers/input/mouse/pxa930_trkball.c b/drivers/input/mouse/pxa930_trkball.c new file mode 100644 index 000000000000..a0f45c4fc198 --- /dev/null +++ b/drivers/input/mouse/pxa930_trkball.c | |||
@@ -0,0 +1,269 @@ | |||
1 | /* | ||
2 | * PXA930 track ball mouse driver | ||
3 | * | ||
4 | * Copyright (C) 2007 Marvell International Ltd. | ||
5 | * 2008-02-28: Yong Yao <yaoyong@marvell.com> | ||
6 | * initial version | ||
7 | * | ||
8 | * This program is free software; you can redistribute it and/or modify | ||
9 | * it under the terms of the GNU General Public License version 2 as | ||
10 | * published by the Free Software Foundation. | ||
11 | */ | ||
12 | |||
13 | #include <linux/init.h> | ||
14 | #include <linux/input.h> | ||
15 | #include <linux/version.h> | ||
16 | #include <linux/interrupt.h> | ||
17 | #include <linux/module.h> | ||
18 | #include <linux/platform_device.h> | ||
19 | #include <linux/delay.h> | ||
20 | #include <linux/io.h> | ||
21 | |||
22 | #include <mach/hardware.h> | ||
23 | #include <mach/pxa930_trkball.h> | ||
24 | |||
25 | /* Trackball Controller Register Definitions */ | ||
26 | #define TBCR (0x000C) | ||
27 | #define TBCNTR (0x0010) | ||
28 | #define TBSBC (0x0014) | ||
29 | |||
30 | #define TBCR_TBRST (1 << 1) | ||
31 | #define TBCR_TBSB (1 << 10) | ||
32 | |||
33 | #define TBCR_Y_FLT(n) (((n) & 0xf) << 6) | ||
34 | #define TBCR_X_FLT(n) (((n) & 0xf) << 2) | ||
35 | |||
36 | #define TBCNTR_YM(n) (((n) >> 24) & 0xff) | ||
37 | #define TBCNTR_YP(n) (((n) >> 16) & 0xff) | ||
38 | #define TBCNTR_XM(n) (((n) >> 8) & 0xff) | ||
39 | #define TBCNTR_XP(n) ((n) & 0xff) | ||
40 | |||
41 | #define TBSBC_TBSBC (0x1) | ||
42 | |||
43 | struct pxa930_trkball { | ||
44 | struct pxa930_trkball_platform_data *pdata; | ||
45 | |||
46 | /* Memory Mapped Register */ | ||
47 | struct resource *mem; | ||
48 | void __iomem *mmio_base; | ||
49 | |||
50 | struct input_dev *input; | ||
51 | }; | ||
52 | |||
53 | static irqreturn_t pxa930_trkball_interrupt(int irq, void *dev_id) | ||
54 | { | ||
55 | struct pxa930_trkball *trkball = dev_id; | ||
56 | struct input_dev *input = trkball->input; | ||
57 | int tbcntr, x, y; | ||
58 | |||
59 | /* According to the spec software must read TBCNTR twice: | ||
60 | * if the read value is the same, the reading is valid | ||
61 | */ | ||
62 | tbcntr = __raw_readl(trkball->mmio_base + TBCNTR); | ||
63 | |||
64 | if (tbcntr == __raw_readl(trkball->mmio_base + TBCNTR)) { | ||
65 | x = (TBCNTR_XP(tbcntr) - TBCNTR_XM(tbcntr)) / 2; | ||
66 | y = (TBCNTR_YP(tbcntr) - TBCNTR_YM(tbcntr)) / 2; | ||
67 | |||
68 | input_report_rel(input, REL_X, x); | ||
69 | input_report_rel(input, REL_Y, y); | ||
70 | input_sync(input); | ||
71 | } | ||
72 | |||
73 | __raw_writel(TBSBC_TBSBC, trkball->mmio_base + TBSBC); | ||
74 | __raw_writel(0, trkball->mmio_base + TBSBC); | ||
75 | |||
76 | return IRQ_HANDLED; | ||
77 | } | ||
78 | |||
79 | /* For TBCR, we need to wait for a while to make sure it has been modified. */ | ||
80 | static int write_tbcr(struct pxa930_trkball *trkball, int v) | ||
81 | { | ||
82 | int i = 100; | ||
83 | |||
84 | __raw_writel(v, trkball->mmio_base + TBCR); | ||
85 | |||
86 | while (i--) { | ||
87 | if (__raw_readl(trkball->mmio_base + TBCR) == v) | ||
88 | break; | ||
89 | msleep(1); | ||
90 | } | ||
91 | |||
92 | if (i == 0) { | ||
93 | pr_err("%s: timed out writing TBCR(%x)!\n", __func__, v); | ||
94 | return -ETIMEDOUT; | ||
95 | } | ||
96 | |||
97 | return 0; | ||
98 | } | ||
99 | |||
100 | static void pxa930_trkball_config(struct pxa930_trkball *trkball) | ||
101 | { | ||
102 | uint32_t tbcr; | ||
103 | |||
104 | /* According to spec, need to write the filters of x,y to 0xf first! */ | ||
105 | tbcr = __raw_readl(trkball->mmio_base + TBCR); | ||
106 | write_tbcr(trkball, tbcr | TBCR_X_FLT(0xf) | TBCR_Y_FLT(0xf)); | ||
107 | write_tbcr(trkball, TBCR_X_FLT(trkball->pdata->x_filter) | | ||
108 | TBCR_Y_FLT(trkball->pdata->y_filter)); | ||
109 | |||
110 | /* According to spec, set TBCR_TBRST first, before clearing it! */ | ||
111 | tbcr = __raw_readl(trkball->mmio_base + TBCR); | ||
112 | write_tbcr(trkball, tbcr | TBCR_TBRST); | ||
113 | write_tbcr(trkball, tbcr & ~TBCR_TBRST); | ||
114 | |||
115 | __raw_writel(TBSBC_TBSBC, trkball->mmio_base + TBSBC); | ||
116 | __raw_writel(0, trkball->mmio_base + TBSBC); | ||
117 | |||
118 | pr_debug("%s: final TBCR=%x!\n", __func__, | ||
119 | __raw_readl(trkball->mmio_base + TBCR)); | ||
120 | } | ||
121 | |||
122 | static int pxa930_trkball_open(struct input_dev *dev) | ||
123 | { | ||
124 | struct pxa930_trkball *trkball = input_get_drvdata(dev); | ||
125 | |||
126 | pxa930_trkball_config(trkball); | ||
127 | |||
128 | return 0; | ||
129 | } | ||
130 | |||
131 | static void pxa930_trkball_disable(struct pxa930_trkball *trkball) | ||
132 | { | ||
133 | uint32_t tbcr = __raw_readl(trkball->mmio_base + TBCR); | ||
134 | |||
135 | /* Held in reset, gate the 32-KHz input clock off */ | ||
136 | write_tbcr(trkball, tbcr | TBCR_TBRST); | ||
137 | } | ||
138 | |||
139 | static void pxa930_trkball_close(struct input_dev *dev) | ||
140 | { | ||
141 | struct pxa930_trkball *trkball = input_get_drvdata(dev); | ||
142 | |||
143 | pxa930_trkball_disable(trkball); | ||
144 | } | ||
145 | |||
146 | static int __devinit pxa930_trkball_probe(struct platform_device *pdev) | ||
147 | { | ||
148 | struct pxa930_trkball *trkball; | ||
149 | struct input_dev *input; | ||
150 | struct resource *res; | ||
151 | int irq, error; | ||
152 | |||
153 | irq = platform_get_irq(pdev, 0); | ||
154 | if (irq < 0) { | ||
155 | dev_err(&pdev->dev, "failed to get trkball irq\n"); | ||
156 | return -ENXIO; | ||
157 | } | ||
158 | |||
159 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | ||
160 | if (!res) { | ||
161 | dev_err(&pdev->dev, "failed to get register memory\n"); | ||
162 | return -ENXIO; | ||
163 | } | ||
164 | |||
165 | trkball = kzalloc(sizeof(struct pxa930_trkball), GFP_KERNEL); | ||
166 | if (!trkball) | ||
167 | return -ENOMEM; | ||
168 | |||
169 | trkball->pdata = pdev->dev.platform_data; | ||
170 | if (!trkball->pdata) { | ||
171 | dev_err(&pdev->dev, "no platform data defined\n"); | ||
172 | error = -EINVAL; | ||
173 | goto failed; | ||
174 | } | ||
175 | |||
176 | trkball->mmio_base = ioremap_nocache(res->start, resource_size(res)); | ||
177 | if (!trkball->mmio_base) { | ||
178 | dev_err(&pdev->dev, "failed to ioremap registers\n"); | ||
179 | error = -ENXIO; | ||
180 | goto failed; | ||
181 | } | ||
182 | |||
183 | /* held the module in reset, will be enabled in open() */ | ||
184 | pxa930_trkball_disable(trkball); | ||
185 | |||
186 | error = request_irq(irq, pxa930_trkball_interrupt, IRQF_DISABLED, | ||
187 | pdev->name, trkball); | ||
188 | if (error) { | ||
189 | dev_err(&pdev->dev, "failed to request irq: %d\n", ret); | ||
190 | goto failed_free_io; | ||
191 | } | ||
192 | |||
193 | platform_set_drvdata(pdev, trkball); | ||
194 | |||
195 | input = input_allocate_device(); | ||
196 | if (!input) { | ||
197 | dev_err(&pdev->dev, "failed to allocate input device\n"); | ||
198 | error = -ENOMEM; | ||
199 | goto failed_free_irq; | ||
200 | } | ||
201 | |||
202 | input->name = pdev->name; | ||
203 | input->id.bustype = BUS_HOST; | ||
204 | input->open = pxa930_trkball_open; | ||
205 | input->close = pxa930_trkball_close; | ||
206 | input->dev.parent = &pdev->dev; | ||
207 | input_set_drvdata(input, trkball); | ||
208 | |||
209 | trkball->input = input; | ||
210 | |||
211 | input_set_capability(input, EV_REL, REL_X); | ||
212 | input_set_capability(input, EV_REL, REL_Y); | ||
213 | |||
214 | error = input_register_device(input); | ||
215 | if (error) { | ||
216 | dev_err(&pdev->dev, "unable to register input device\n"); | ||
217 | goto failed_free_input; | ||
218 | } | ||
219 | |||
220 | return 0; | ||
221 | |||
222 | failed_free_input: | ||
223 | input_free_device(input); | ||
224 | failed_free_irq: | ||
225 | free_irq(irq, trkball); | ||
226 | failed_free_io: | ||
227 | iounmap(trkball->mmio_base); | ||
228 | failed: | ||
229 | kfree(trkball); | ||
230 | return ret; | ||
231 | } | ||
232 | |||
233 | static int __devexit pxa930_trkball_remove(struct platform_device *pdev) | ||
234 | { | ||
235 | struct pxa930_trkball *trkball = platform_get_drvdata(pdev); | ||
236 | int irq = platform_get_irq(pdev, 0); | ||
237 | |||
238 | input_unregister_device(trkball->input); | ||
239 | free_irq(irq, trkball); | ||
240 | iounmap(trkball->mmio_base); | ||
241 | kfree(trkball); | ||
242 | |||
243 | return 0; | ||
244 | } | ||
245 | |||
246 | static struct platform_driver pxa930_trkball_driver = { | ||
247 | .driver = { | ||
248 | .name = "pxa930-trkball", | ||
249 | }, | ||
250 | .probe = pxa930_trkball_probe, | ||
251 | .remove = __devexit_p(pxa930_trkball_remove), | ||
252 | }; | ||
253 | |||
254 | static int __init pxa930_trkball_init(void) | ||
255 | { | ||
256 | return platform_driver_register(&pxa930_trkball_driver); | ||
257 | } | ||
258 | |||
259 | static void __exit pxa930_trkball_exit(void) | ||
260 | { | ||
261 | platform_driver_unregister(&pxa930_trkball_driver); | ||
262 | } | ||
263 | |||
264 | module_init(pxa930_trkball_init); | ||
265 | module_exit(pxa930_trkball_exit); | ||
266 | |||
267 | MODULE_AUTHOR("Yong Yao <yaoyong@marvell.com>"); | ||
268 | MODULE_DESCRIPTION("PXA930 Trackball Mouse Driver"); | ||
269 | MODULE_LICENSE("GPL"); | ||