1 files changed, 415 insertions, 0 deletions

diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c
new file mode 100644
index 000000000000..3884d1e3f070
--- /dev/null
+++ b/drivers/input/keyboard/tosakbd.c
@@ -0,0 +1,415 @@
+/*
+ *  Keyboard driver for Sharp Tosa models (SL-6000x)
+ *
+ *  Copyright (c) 2005 Dirk Opfer
+ *  Copyright (c) 2007 Dmitry Baryshkov
+ *
+ *  Based on xtkbd.c/locomkbd.c/corgikbd.c
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/tosa.h>
+
+#define KB_ROWMASK(r)           (1 << (r))
+#define SCANCODE(r, c)          (((r)<<4) + (c) + 1)
+#define NR_SCANCODES            SCANCODE(TOSA_KEY_SENSE_NUM - 1, TOSA_KEY_STROBE_NUM - 1) + 1
+
+#define SCAN_INTERVAL           (HZ/10)
+
+#define KB_DISCHARGE_DELAY      10
+#define KB_ACTIVATE_DELAY       10
+
+static unsigned int tosakbd_keycode[NR_SCANCODES] = {
+0,
+0, KEY_W, 0, 0, 0, KEY_K, KEY_BACKSPACE, KEY_P,
+0, 0, 0, 0, 0, 0, 0, 0,
+KEY_Q, KEY_E, KEY_T, KEY_Y, 0, KEY_O, KEY_I, KEY_COMMA,
+0, 0, 0, 0, 0, 0, 0, 0,
+KEY_A, KEY_D, KEY_G, KEY_U, 0, KEY_L, KEY_ENTER, KEY_DOT,
+0, 0, 0, 0, 0, 0, 0, 0,
+KEY_Z, KEY_C, KEY_V, KEY_J, TOSA_KEY_ADDRESSBOOK, TOSA_KEY_CANCEL, TOSA_KEY_CENTER, TOSA_KEY_OK,
+KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0, 0,
+KEY_S, KEY_R, KEY_B, KEY_N, TOSA_KEY_CALENDAR, TOSA_KEY_HOMEPAGE, KEY_LEFTCTRL, TOSA_KEY_LIGHT,
+0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0,
+KEY_TAB, KEY_SLASH, KEY_H, KEY_M, TOSA_KEY_MENU, 0, KEY_UP, 0,
+0, 0, TOSA_KEY_FN, 0, 0, 0, 0, 0,
+KEY_X, KEY_F, KEY_SPACE, KEY_APOSTROPHE, TOSA_KEY_MAIL, KEY_LEFT, KEY_DOWN, KEY_RIGHT,
+0, 0, 0,
+};
+
+struct tosakbd {
+        unsigned int keycode[ARRAY_SIZE(tosakbd_keycode)];
+        struct input_dev *input;
+
+        spinlock_t lock; /* protect kbd scanning */
+        struct timer_list timer;
+};
+
+
+/* Helper functions for reading the keyboard matrix
+ * Note: We should really be using pxa_gpio_mode to alter GPDR but it
+ *       requires a function call per GPIO bit which is excessive
+ *       when we need to access 12 bits at once, multiple times.
+ * These functions must be called within local_irq_save()/local_irq_restore()
+ * or similar.
+ */
+#define GET_ROWS_STATUS(c)      ((GPLR2 & TOSA_GPIO_ALL_SENSE_BIT) >> TOSA_GPIO_ALL_SENSE_RSHIFT)
+
+static inline void tosakbd_discharge_all(void)
+{
+        /* STROBE All HiZ */
+        GPCR1  = TOSA_GPIO_HIGH_STROBE_BIT;
+        GPDR1 &= ~TOSA_GPIO_HIGH_STROBE_BIT;
+        GPCR2  = TOSA_GPIO_LOW_STROBE_BIT;
+        GPDR2 &= ~TOSA_GPIO_LOW_STROBE_BIT;
+}
+
+static inline void tosakbd_activate_all(void)
+{
+        /* STROBE ALL -> High */
+        GPSR1  = TOSA_GPIO_HIGH_STROBE_BIT;
+        GPDR1 |= TOSA_GPIO_HIGH_STROBE_BIT;
+        GPSR2  = TOSA_GPIO_LOW_STROBE_BIT;
+        GPDR2 |= TOSA_GPIO_LOW_STROBE_BIT;
+
+        udelay(KB_DISCHARGE_DELAY);
+
+        /* STATE CLEAR */
+        GEDR2 |= TOSA_GPIO_ALL_SENSE_BIT;
+}
+
+static inline void tosakbd_activate_col(int col)
+{
+        if (col <= 5) {
+                /* STROBE col -> High, not col -> HiZ */
+                GPSR1 = TOSA_GPIO_STROBE_BIT(col);
+                GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col);
+        } else {
+                /* STROBE col -> High, not col -> HiZ */
+                GPSR2 = TOSA_GPIO_STROBE_BIT(col);
+                GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col);
+        }
+}
+
+static inline void tosakbd_reset_col(int col)
+{
+        if (col <= 5) {
+                /* STROBE col -> Low */
+                GPCR1 = TOSA_GPIO_STROBE_BIT(col);
+                /* STROBE col -> out, not col -> HiZ */
+                GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col);
+        } else {
+                /* STROBE col -> Low */
+                GPCR2 = TOSA_GPIO_STROBE_BIT(col);
+                /* STROBE col -> out, not col -> HiZ */
+                GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col);
+        }
+}
+/*
+ * The tosa keyboard only generates interrupts when a key is pressed.
+ * So when a key is pressed, we enable a timer.  This timer scans the
+ * keyboard, and this is how we detect when the key is released.
+ */
+
+/* Scan the hardware keyboard and push any changes up through the input layer */
+static void tosakbd_scankeyboard(struct platform_device *dev)
+{
+        struct tosakbd *tosakbd = platform_get_drvdata(dev);
+        unsigned int row, col, rowd;
+        unsigned long flags;
+        unsigned int num_pressed = 0;
+
+        spin_lock_irqsave(&tosakbd->lock, flags);
+
+        for (col = 0; col < TOSA_KEY_STROBE_NUM; col++) {
+                /*
+                 * Discharge the output driver capacitatance
+                 * in the keyboard matrix. (Yes it is significant..)
+                 */
+                tosakbd_discharge_all();
+                udelay(KB_DISCHARGE_DELAY);
+
+                tosakbd_activate_col(col);
+                udelay(KB_ACTIVATE_DELAY);
+
+                rowd = GET_ROWS_STATUS(col);
+
+                for (row = 0; row < TOSA_KEY_SENSE_NUM; row++) {
+                        unsigned int scancode, pressed;
+                        scancode = SCANCODE(row, col);
+                        pressed = rowd & KB_ROWMASK(row);
+
+                        if (pressed && !tosakbd->keycode[scancode])
+                                dev_warn(&dev->dev,
+                                                "unhandled scancode: 0x%02x\n",
+                                                scancode);
+
+                        input_report_key(tosakbd->input,
+                                        tosakbd->keycode[scancode],
+                                        pressed);
+                        if (pressed)
+                                num_pressed++;
+                }
+
+                tosakbd_reset_col(col);
+        }
+
+        tosakbd_activate_all();
+
+        input_sync(tosakbd->input);
+
+        /* if any keys are pressed, enable the timer */
+        if (num_pressed)
+                mod_timer(&tosakbd->timer, jiffies + SCAN_INTERVAL);
+
+        spin_unlock_irqrestore(&tosakbd->lock, flags);
+}
+
+/*
+ * tosa keyboard interrupt handler.
+ */
+static irqreturn_t tosakbd_interrupt(int irq, void *__dev)
+{
+        struct platform_device *dev = __dev;
+        struct tosakbd *tosakbd = platform_get_drvdata(dev);
+
+        if (!timer_pending(&tosakbd->timer)) {
+                /** wait chattering delay **/
+                udelay(20);
+                tosakbd_scankeyboard(dev);
+        }
+
+        return IRQ_HANDLED;
+}
+
+/*
+ * tosa timer checking for released keys
+ */
+static void tosakbd_timer_callback(unsigned long __dev)
+{
+        struct platform_device *dev = (struct platform_device *)__dev;
+        tosakbd_scankeyboard(dev);
+}
+
+#ifdef CONFIG_PM
+static int tosakbd_suspend(struct platform_device *dev, pm_message_t state)
+{
+        struct tosakbd *tosakbd = platform_get_drvdata(dev);
+
+        del_timer_sync(&tosakbd->timer);
+
+        return 0;
+}
+
+static int tosakbd_resume(struct platform_device *dev)
+{
+        tosakbd_scankeyboard(dev);
+
+        return 0;
+}
+#else
+#define tosakbd_suspend         NULL
+#define tosakbd_resume          NULL
+#endif
+
+static int __devinit tosakbd_probe(struct platform_device *pdev) {
+
+        int i;
+        struct tosakbd *tosakbd;
+        struct input_dev *input_dev;
+        int error;
+
+        tosakbd = kzalloc(sizeof(struct tosakbd), GFP_KERNEL);
+        if (!tosakbd)
+                return -ENOMEM;
+
+        input_dev = input_allocate_device();
+        if (!input_dev) {
+                kfree(tosakbd);
+                return -ENOMEM;
+        }
+
+        platform_set_drvdata(pdev, tosakbd);
+
+        spin_lock_init(&tosakbd->lock);
+
+        /* Init Keyboard rescan timer */
+        init_timer(&tosakbd->timer);
+        tosakbd->timer.function = tosakbd_timer_callback;
+        tosakbd->timer.data = (unsigned long) pdev;
+
+        tosakbd->input = input_dev;
+
+        input_set_drvdata(input_dev, tosakbd);
+        input_dev->name = "Tosa Keyboard";
+        input_dev->phys = "tosakbd/input0";
+        input_dev->dev.parent = &pdev->dev;
+
+        input_dev->id.bustype = BUS_HOST;
+        input_dev->id.vendor = 0x0001;
+        input_dev->id.product = 0x0001;
+        input_dev->id.version = 0x0100;
+
+        input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+        input_dev->keycode = tosakbd->keycode;
+        input_dev->keycodesize = sizeof(unsigned int);
+        input_dev->keycodemax = ARRAY_SIZE(tosakbd_keycode);
+
+        memcpy(tosakbd->keycode, tosakbd_keycode, sizeof(tosakbd_keycode));
+
+        for (i = 0; i < ARRAY_SIZE(tosakbd_keycode); i++)
+                __set_bit(tosakbd->keycode[i], input_dev->keybit);
+        clear_bit(0, input_dev->keybit);
+
+        /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */
+        for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) {
+                int gpio = TOSA_GPIO_KEY_SENSE(i);
+                int irq;
+                error = gpio_request(gpio, "tosakbd");
+                if (error < 0) {
+                        printk(KERN_ERR "tosakbd: failed to request GPIO %d, "
+                                " error %d\n", gpio, error);
+                        goto fail;
+                }
+
+                error = gpio_direction_input(TOSA_GPIO_KEY_SENSE(i));
+                if (error < 0) {
+                        printk(KERN_ERR "tosakbd: failed to configure input"
+                                " direction for GPIO %d, error %d\n",
+                                gpio, error);
+                        gpio_free(gpio);
+                        goto fail;
+                }
+
+                irq = gpio_to_irq(gpio);
+                if (irq < 0) {
+                        error = irq;
+                        printk(KERN_ERR "gpio-keys: Unable to get irq number"
+                                " for GPIO %d, error %d\n",
+                                gpio, error);
+                        gpio_free(gpio);
+                        goto fail;
+                }
+
+                error = request_irq(irq, tosakbd_interrupt,
+                                        IRQF_DISABLED | IRQF_TRIGGER_RISING,
+                                        "tosakbd", pdev);
+
+                if (error) {
+                        printk("tosakbd: Can't get IRQ: %d: error %d!\n",
+                                        irq, error);
+                        gpio_free(gpio);
+                        goto fail;
+                }
+        }
+
+        /* Set Strobe lines as outputs - set high */
+        for (i = 0; i < TOSA_KEY_STROBE_NUM; i++) {
+                int gpio = TOSA_GPIO_KEY_STROBE(i);
+                error = gpio_request(gpio, "tosakbd");
+                if (error < 0) {
+                        printk(KERN_ERR "tosakbd: failed to request GPIO %d, "
+                                " error %d\n", gpio, error);
+                        goto fail2;
+                }
+
+                error = gpio_direction_output(gpio, 1);
+                if (error < 0) {
+                        printk(KERN_ERR "tosakbd: failed to configure input"
+                                " direction for GPIO %d, error %d\n",
+                                gpio, error);
+                        gpio_free(gpio);
+                        goto fail;
+                }
+
+        }
+
+        error = input_register_device(input_dev);
+        if (error) {
+                printk(KERN_ERR "tosakbd: Unable to register input device, "
+                        "error: %d\n", error);
+                goto fail;
+        }
+
+        printk(KERN_INFO "input: Tosa Keyboard Registered\n");
+
+        return 0;
+
+fail2:
+        while (--i >= 0)
+                gpio_free(TOSA_GPIO_KEY_STROBE(i));
+
+        i = TOSA_KEY_SENSE_NUM;
+fail:
+        while (--i >= 0) {
+                free_irq(gpio_to_irq(TOSA_GPIO_KEY_SENSE(i)), pdev);
+                gpio_free(TOSA_GPIO_KEY_SENSE(i));
+        }
+
+        platform_set_drvdata(pdev, NULL);
+        input_free_device(input_dev);
+        kfree(tosakbd);
+
+        return error;
+}
+
+static int __devexit tosakbd_remove(struct platform_device *dev) {
+
+        int i;
+        struct tosakbd *tosakbd = platform_get_drvdata(dev);
+
+        for (i = 0; i < TOSA_KEY_STROBE_NUM; i++)
+                gpio_free(TOSA_GPIO_KEY_STROBE(i));
+
+        for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) {
+                free_irq(gpio_to_irq(TOSA_GPIO_KEY_SENSE(i)), dev);
+                gpio_free(TOSA_GPIO_KEY_SENSE(i));
+        }
+
+        del_timer_sync(&tosakbd->timer);
+
+        input_unregister_device(tosakbd->input);
+
+        kfree(tosakbd);
+
+        return 0;
+}
+
+static struct platform_driver tosakbd_driver = {
+        .probe          = tosakbd_probe,
+        .remove         = __devexit_p(tosakbd_remove),
+        .suspend        = tosakbd_suspend,
+        .resume         = tosakbd_resume,
+        .driver         = {
+                .name   = "tosa-keyboard",
+        },
+};
+
+static int __devinit tosakbd_init(void)
+{
+        return platform_driver_register(&tosakbd_driver);
+}
+
+static void __exit tosakbd_exit(void)
+{
+        platform_driver_unregister(&tosakbd_driver);
+}
+
+module_init(tosakbd_init);
+module_exit(tosakbd_exit);
+
+MODULE_AUTHOR("Dirk Opfer <Dirk@Opfer-Online.de>");
+MODULE_DESCRIPTION("Tosa Keyboard Driver");
+MODULE_LICENSE("GPL v2");