diff options
Diffstat (limited to 'drivers/input/joystick')
-rw-r--r-- | drivers/input/joystick/Kconfig | 18 | ||||
-rw-r--r-- | drivers/input/joystick/Makefile | 1 | ||||
-rw-r--r-- | drivers/input/joystick/xpad.c | 434 |
3 files changed, 451 insertions, 2 deletions
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index 271263443c37..82f563e24fdb 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig | |||
@@ -2,7 +2,7 @@ | |||
2 | # Joystick driver configuration | 2 | # Joystick driver configuration |
3 | # | 3 | # |
4 | menuconfig INPUT_JOYSTICK | 4 | menuconfig INPUT_JOYSTICK |
5 | bool "Joysticks" | 5 | bool "Joysticks/Gamepads" |
6 | help | 6 | help |
7 | If you have a joystick, 6dof controller, gamepad, steering wheel, | 7 | If you have a joystick, 6dof controller, gamepad, steering wheel, |
8 | weapon control system or something like that you can say Y here | 8 | weapon control system or something like that you can say Y here |
@@ -196,7 +196,7 @@ config JOYSTICK_TWIDJOY | |||
196 | config JOYSTICK_DB9 | 196 | config JOYSTICK_DB9 |
197 | tristate "Multisystem, Sega Genesis, Saturn joysticks and gamepads" | 197 | tristate "Multisystem, Sega Genesis, Saturn joysticks and gamepads" |
198 | depends on PARPORT | 198 | depends on PARPORT |
199 | ---help--- | 199 | help |
200 | Say Y here if you have a Sega Master System gamepad, Sega Genesis | 200 | Say Y here if you have a Sega Master System gamepad, Sega Genesis |
201 | gamepad, Sega Saturn gamepad, or a Multisystem -- Atari, Amiga, | 201 | gamepad, Sega Saturn gamepad, or a Multisystem -- Atari, Amiga, |
202 | Commodore, Amstrad CPC joystick connected to your parallel port. | 202 | Commodore, Amstrad CPC joystick connected to your parallel port. |
@@ -253,4 +253,18 @@ config JOYSTICK_JOYDUMP | |||
253 | To compile this driver as a module, choose M here: the | 253 | To compile this driver as a module, choose M here: the |
254 | module will be called joydump. | 254 | module will be called joydump. |
255 | 255 | ||
256 | config JOYSTICK_XPAD | ||
257 | tristate "X-Box gamepad support" | ||
258 | select USB | ||
259 | help | ||
260 | Say Y here if you want to use the X-Box pad with your computer. | ||
261 | Make sure to say Y to "Joystick support" (CONFIG_INPUT_JOYDEV) | ||
262 | and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well. | ||
263 | |||
264 | For information about how to connect the X-Box pad to USB, see | ||
265 | <file:Documentation/input/xpad.txt>. | ||
266 | |||
267 | To compile this driver as a module, choose M here: the | ||
268 | module will be called xpad. | ||
269 | |||
256 | endif | 270 | endif |
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile index 5231f6ff75b8..e855abb0cc51 100644 --- a/drivers/input/joystick/Makefile +++ b/drivers/input/joystick/Makefile | |||
@@ -26,5 +26,6 @@ obj-$(CONFIG_JOYSTICK_TMDC) += tmdc.o | |||
26 | obj-$(CONFIG_JOYSTICK_TURBOGRAFX) += turbografx.o | 26 | obj-$(CONFIG_JOYSTICK_TURBOGRAFX) += turbografx.o |
27 | obj-$(CONFIG_JOYSTICK_TWIDJOY) += twidjoy.o | 27 | obj-$(CONFIG_JOYSTICK_TWIDJOY) += twidjoy.o |
28 | obj-$(CONFIG_JOYSTICK_WARRIOR) += warrior.o | 28 | obj-$(CONFIG_JOYSTICK_WARRIOR) += warrior.o |
29 | obj-$(CONFIG_JOYSTICK_XPAD) += xpad.o | ||
29 | 30 | ||
30 | obj-$(CONFIG_JOYSTICK_IFORCE) += iforce/ | 31 | obj-$(CONFIG_JOYSTICK_IFORCE) += iforce/ |
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c new file mode 100644 index 000000000000..735723912950 --- /dev/null +++ b/drivers/input/joystick/xpad.c | |||
@@ -0,0 +1,434 @@ | |||
1 | /* | ||
2 | * X-Box gamepad - v0.0.6 | ||
3 | * | ||
4 | * Copyright (c) 2002 Marko Friedemann <mfr@bmx-chemnitz.de> | ||
5 | * 2004 Oliver Schwartz <Oliver.Schwartz@gmx.de>, | ||
6 | * Steven Toth <steve@toth.demon.co.uk>, | ||
7 | * Franz Lehner <franz@caos.at>, | ||
8 | * Ivan Hawkes <blackhawk@ivanhawkes.com> | ||
9 | * 2005 Dominic Cerquetti <binary1230@yahoo.com> | ||
10 | * 2006 Adam Buchbinder <adam.buchbinder@gmail.com> | ||
11 | * | ||
12 | * This program is free software; you can redistribute it and/or | ||
13 | * modify it under the terms of the GNU General Public License as | ||
14 | * published by the Free Software Foundation; either version 2 of | ||
15 | * the License, or (at your option) any later version. | ||
16 | * | ||
17 | * This program is distributed in the hope that it will be useful, | ||
18 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
19 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
20 | * GNU General Public License for more details. | ||
21 | * | ||
22 | * You should have received a copy of the GNU General Public License | ||
23 | * along with this program; if not, write to the Free Software | ||
24 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | ||
25 | * | ||
26 | * | ||
27 | * This driver is based on: | ||
28 | * - information from http://euc.jp/periphs/xbox-controller.ja.html | ||
29 | * - the iForce driver drivers/char/joystick/iforce.c | ||
30 | * - the skeleton-driver drivers/usb/usb-skeleton.c | ||
31 | * | ||
32 | * Thanks to: | ||
33 | * - ITO Takayuki for providing essential xpad information on his website | ||
34 | * - Vojtech Pavlik - iforce driver / input subsystem | ||
35 | * - Greg Kroah-Hartman - usb-skeleton driver | ||
36 | * - XBOX Linux project - extra USB id's | ||
37 | * | ||
38 | * TODO: | ||
39 | * - fine tune axes (especially trigger axes) | ||
40 | * - fix "analog" buttons (reported as digital now) | ||
41 | * - get rumble working | ||
42 | * - need USB IDs for other dance pads | ||
43 | * | ||
44 | * History: | ||
45 | * | ||
46 | * 2002-06-27 - 0.0.1 : first version, just said "XBOX HID controller" | ||
47 | * | ||
48 | * 2002-07-02 - 0.0.2 : basic working version | ||
49 | * - all axes and 9 of the 10 buttons work (german InterAct device) | ||
50 | * - the black button does not work | ||
51 | * | ||
52 | * 2002-07-14 - 0.0.3 : rework by Vojtech Pavlik | ||
53 | * - indentation fixes | ||
54 | * - usb + input init sequence fixes | ||
55 | * | ||
56 | * 2002-07-16 - 0.0.4 : minor changes, merge with Vojtech's v0.0.3 | ||
57 | * - verified the lack of HID and report descriptors | ||
58 | * - verified that ALL buttons WORK | ||
59 | * - fixed d-pad to axes mapping | ||
60 | * | ||
61 | * 2002-07-17 - 0.0.5 : simplified d-pad handling | ||
62 | * | ||
63 | * 2004-10-02 - 0.0.6 : DDR pad support | ||
64 | * - borrowed from the XBOX linux kernel | ||
65 | * - USB id's for commonly used dance pads are present | ||
66 | * - dance pads will map D-PAD to buttons, not axes | ||
67 | * - pass the module paramater 'dpad_to_buttons' to force | ||
68 | * the D-PAD to map to buttons if your pad is not detected | ||
69 | */ | ||
70 | |||
71 | #include <linux/kernel.h> | ||
72 | #include <linux/init.h> | ||
73 | #include <linux/slab.h> | ||
74 | #include <linux/stat.h> | ||
75 | #include <linux/module.h> | ||
76 | #include <linux/moduleparam.h> | ||
77 | #include <linux/smp_lock.h> | ||
78 | #include <linux/usb/input.h> | ||
79 | |||
80 | #define DRIVER_VERSION "v0.0.6" | ||
81 | #define DRIVER_AUTHOR "Marko Friedemann <mfr@bmx-chemnitz.de>" | ||
82 | #define DRIVER_DESC "X-Box pad driver" | ||
83 | |||
84 | #define XPAD_PKT_LEN 32 | ||
85 | |||
86 | /* xbox d-pads should map to buttons, as is required for DDR pads | ||
87 | but we map them to axes when possible to simplify things */ | ||
88 | #define MAP_DPAD_TO_BUTTONS 0 | ||
89 | #define MAP_DPAD_TO_AXES 1 | ||
90 | #define MAP_DPAD_UNKNOWN -1 | ||
91 | |||
92 | static int dpad_to_buttons; | ||
93 | module_param(dpad_to_buttons, bool, S_IRUGO); | ||
94 | MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads"); | ||
95 | |||
96 | static const struct xpad_device { | ||
97 | u16 idVendor; | ||
98 | u16 idProduct; | ||
99 | char *name; | ||
100 | u8 dpad_mapping; | ||
101 | } xpad_device[] = { | ||
102 | { 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES }, | ||
103 | { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES }, | ||
104 | { 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES }, | ||
105 | { 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES }, | ||
106 | { 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS }, | ||
107 | { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES }, | ||
108 | { 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES }, | ||
109 | { 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES }, | ||
110 | { 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES }, | ||
111 | { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES }, | ||
112 | { 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES }, | ||
113 | { 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES }, | ||
114 | { 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES }, | ||
115 | { 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES }, | ||
116 | { 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS }, | ||
117 | { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES }, | ||
118 | { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS }, | ||
119 | { 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES }, | ||
120 | { 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES }, | ||
121 | { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES }, | ||
122 | { 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES }, | ||
123 | { 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES}, | ||
124 | { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES }, | ||
125 | { 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES }, | ||
126 | { 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES }, | ||
127 | { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES }, | ||
128 | { 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES }, | ||
129 | { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES }, | ||
130 | { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES }, | ||
131 | { 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS }, | ||
132 | { 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS }, | ||
133 | { 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES }, | ||
134 | { 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN } | ||
135 | }; | ||
136 | |||
137 | static const signed short xpad_btn[] = { | ||
138 | BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, /* "analog" buttons */ | ||
139 | BTN_START, BTN_BACK, BTN_THUMBL, BTN_THUMBR, /* start/back/sticks */ | ||
140 | -1 /* terminating entry */ | ||
141 | }; | ||
142 | |||
143 | /* only used if MAP_DPAD_TO_BUTTONS */ | ||
144 | static const signed short xpad_btn_pad[] = { | ||
145 | BTN_LEFT, BTN_RIGHT, /* d-pad left, right */ | ||
146 | BTN_0, BTN_1, /* d-pad up, down (XXX names??) */ | ||
147 | -1 /* terminating entry */ | ||
148 | }; | ||
149 | |||
150 | static const signed short xpad_abs[] = { | ||
151 | ABS_X, ABS_Y, /* left stick */ | ||
152 | ABS_RX, ABS_RY, /* right stick */ | ||
153 | ABS_Z, ABS_RZ, /* triggers left/right */ | ||
154 | -1 /* terminating entry */ | ||
155 | }; | ||
156 | |||
157 | /* only used if MAP_DPAD_TO_AXES */ | ||
158 | static const signed short xpad_abs_pad[] = { | ||
159 | ABS_HAT0X, ABS_HAT0Y, /* d-pad axes */ | ||
160 | -1 /* terminating entry */ | ||
161 | }; | ||
162 | |||
163 | static struct usb_device_id xpad_table [] = { | ||
164 | { USB_INTERFACE_INFO('X', 'B', 0) }, /* X-Box USB-IF not approved class */ | ||
165 | { } | ||
166 | }; | ||
167 | |||
168 | MODULE_DEVICE_TABLE (usb, xpad_table); | ||
169 | |||
170 | struct usb_xpad { | ||
171 | struct input_dev *dev; /* input device interface */ | ||
172 | struct usb_device *udev; /* usb device */ | ||
173 | |||
174 | struct urb *irq_in; /* urb for interrupt in report */ | ||
175 | unsigned char *idata; /* input data */ | ||
176 | dma_addr_t idata_dma; | ||
177 | |||
178 | char phys[65]; /* physical device path */ | ||
179 | |||
180 | int dpad_mapping; /* map d-pad to buttons or to axes */ | ||
181 | }; | ||
182 | |||
183 | /* | ||
184 | * xpad_process_packet | ||
185 | * | ||
186 | * Completes a request by converting the data into events for the | ||
187 | * input subsystem. | ||
188 | * | ||
189 | * The used report descriptor was taken from ITO Takayukis website: | ||
190 | * http://euc.jp/periphs/xbox-controller.ja.html | ||
191 | */ | ||
192 | |||
193 | static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data) | ||
194 | { | ||
195 | struct input_dev *dev = xpad->dev; | ||
196 | |||
197 | /* left stick */ | ||
198 | input_report_abs(dev, ABS_X, (__s16) (((__s16)data[13] << 8) | data[12])); | ||
199 | input_report_abs(dev, ABS_Y, (__s16) (((__s16)data[15] << 8) | data[14])); | ||
200 | |||
201 | /* right stick */ | ||
202 | input_report_abs(dev, ABS_RX, (__s16) (((__s16)data[17] << 8) | data[16])); | ||
203 | input_report_abs(dev, ABS_RY, (__s16) (((__s16)data[19] << 8) | data[18])); | ||
204 | |||
205 | /* triggers left/right */ | ||
206 | input_report_abs(dev, ABS_Z, data[10]); | ||
207 | input_report_abs(dev, ABS_RZ, data[11]); | ||
208 | |||
209 | /* digital pad */ | ||
210 | if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) { | ||
211 | input_report_abs(dev, ABS_HAT0X, !!(data[2] & 0x08) - !!(data[2] & 0x04)); | ||
212 | input_report_abs(dev, ABS_HAT0Y, !!(data[2] & 0x02) - !!(data[2] & 0x01)); | ||
213 | } else /* xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS */ { | ||
214 | input_report_key(dev, BTN_LEFT, data[2] & 0x04); | ||
215 | input_report_key(dev, BTN_RIGHT, data[2] & 0x08); | ||
216 | input_report_key(dev, BTN_0, data[2] & 0x01); // up | ||
217 | input_report_key(dev, BTN_1, data[2] & 0x02); // down | ||
218 | } | ||
219 | |||
220 | /* start/back buttons and stick press left/right */ | ||
221 | input_report_key(dev, BTN_START, data[2] & 0x10); | ||
222 | input_report_key(dev, BTN_BACK, data[2] & 0x20); | ||
223 | input_report_key(dev, BTN_THUMBL, data[2] & 0x40); | ||
224 | input_report_key(dev, BTN_THUMBR, data[2] & 0x80); | ||
225 | |||
226 | /* "analog" buttons A, B, X, Y */ | ||
227 | input_report_key(dev, BTN_A, data[4]); | ||
228 | input_report_key(dev, BTN_B, data[5]); | ||
229 | input_report_key(dev, BTN_X, data[6]); | ||
230 | input_report_key(dev, BTN_Y, data[7]); | ||
231 | |||
232 | /* "analog" buttons black, white */ | ||
233 | input_report_key(dev, BTN_C, data[8]); | ||
234 | input_report_key(dev, BTN_Z, data[9]); | ||
235 | |||
236 | input_sync(dev); | ||
237 | } | ||
238 | |||
239 | static void xpad_irq_in(struct urb *urb) | ||
240 | { | ||
241 | struct usb_xpad *xpad = urb->context; | ||
242 | int retval; | ||
243 | |||
244 | switch (urb->status) { | ||
245 | case 0: | ||
246 | /* success */ | ||
247 | break; | ||
248 | case -ECONNRESET: | ||
249 | case -ENOENT: | ||
250 | case -ESHUTDOWN: | ||
251 | /* this urb is terminated, clean up */ | ||
252 | dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); | ||
253 | return; | ||
254 | default: | ||
255 | dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); | ||
256 | goto exit; | ||
257 | } | ||
258 | |||
259 | xpad_process_packet(xpad, 0, xpad->idata); | ||
260 | |||
261 | exit: | ||
262 | retval = usb_submit_urb (urb, GFP_ATOMIC); | ||
263 | if (retval) | ||
264 | err ("%s - usb_submit_urb failed with result %d", | ||
265 | __FUNCTION__, retval); | ||
266 | } | ||
267 | |||
268 | static int xpad_open (struct input_dev *dev) | ||
269 | { | ||
270 | struct usb_xpad *xpad = input_get_drvdata(dev); | ||
271 | |||
272 | xpad->irq_in->dev = xpad->udev; | ||
273 | if (usb_submit_urb(xpad->irq_in, GFP_KERNEL)) | ||
274 | return -EIO; | ||
275 | |||
276 | return 0; | ||
277 | } | ||
278 | |||
279 | static void xpad_close (struct input_dev *dev) | ||
280 | { | ||
281 | struct usb_xpad *xpad = input_get_drvdata(dev); | ||
282 | |||
283 | usb_kill_urb(xpad->irq_in); | ||
284 | } | ||
285 | |||
286 | static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs) | ||
287 | { | ||
288 | set_bit(abs, input_dev->absbit); | ||
289 | |||
290 | switch (abs) { | ||
291 | case ABS_X: | ||
292 | case ABS_Y: | ||
293 | case ABS_RX: | ||
294 | case ABS_RY: /* the two sticks */ | ||
295 | input_set_abs_params(input_dev, abs, -32768, 32767, 16, 128); | ||
296 | break; | ||
297 | case ABS_Z: | ||
298 | case ABS_RZ: /* the triggers */ | ||
299 | input_set_abs_params(input_dev, abs, 0, 255, 0, 0); | ||
300 | break; | ||
301 | case ABS_HAT0X: | ||
302 | case ABS_HAT0Y: /* the d-pad (only if MAP_DPAD_TO_AXES) */ | ||
303 | input_set_abs_params(input_dev, abs, -1, 1, 0, 0); | ||
304 | break; | ||
305 | } | ||
306 | } | ||
307 | |||
308 | static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id) | ||
309 | { | ||
310 | struct usb_device *udev = interface_to_usbdev (intf); | ||
311 | struct usb_xpad *xpad; | ||
312 | struct input_dev *input_dev; | ||
313 | struct usb_endpoint_descriptor *ep_irq_in; | ||
314 | int i; | ||
315 | int error = -ENOMEM; | ||
316 | |||
317 | for (i = 0; xpad_device[i].idVendor; i++) { | ||
318 | if ((le16_to_cpu(udev->descriptor.idVendor) == xpad_device[i].idVendor) && | ||
319 | (le16_to_cpu(udev->descriptor.idProduct) == xpad_device[i].idProduct)) | ||
320 | break; | ||
321 | } | ||
322 | |||
323 | xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL); | ||
324 | input_dev = input_allocate_device(); | ||
325 | if (!xpad || !input_dev) | ||
326 | goto fail1; | ||
327 | |||
328 | xpad->idata = usb_buffer_alloc(udev, XPAD_PKT_LEN, | ||
329 | GFP_ATOMIC, &xpad->idata_dma); | ||
330 | if (!xpad->idata) | ||
331 | goto fail1; | ||
332 | |||
333 | xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL); | ||
334 | if (!xpad->irq_in) | ||
335 | goto fail2; | ||
336 | |||
337 | xpad->udev = udev; | ||
338 | xpad->dpad_mapping = xpad_device[i].dpad_mapping; | ||
339 | if (xpad->dpad_mapping == MAP_DPAD_UNKNOWN) | ||
340 | xpad->dpad_mapping = dpad_to_buttons; | ||
341 | xpad->dev = input_dev; | ||
342 | usb_make_path(udev, xpad->phys, sizeof(xpad->phys)); | ||
343 | strlcat(xpad->phys, "/input0", sizeof(xpad->phys)); | ||
344 | |||
345 | input_dev->name = xpad_device[i].name; | ||
346 | input_dev->phys = xpad->phys; | ||
347 | usb_to_input_id(udev, &input_dev->id); | ||
348 | input_dev->dev.parent = &intf->dev; | ||
349 | |||
350 | input_set_drvdata(input_dev, xpad); | ||
351 | |||
352 | input_dev->open = xpad_open; | ||
353 | input_dev->close = xpad_close; | ||
354 | |||
355 | input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); | ||
356 | |||
357 | /* set up buttons */ | ||
358 | for (i = 0; xpad_btn[i] >= 0; i++) | ||
359 | set_bit(xpad_btn[i], input_dev->keybit); | ||
360 | if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS) | ||
361 | for (i = 0; xpad_btn_pad[i] >= 0; i++) | ||
362 | set_bit(xpad_btn_pad[i], input_dev->keybit); | ||
363 | |||
364 | /* set up axes */ | ||
365 | for (i = 0; xpad_abs[i] >= 0; i++) | ||
366 | xpad_set_up_abs(input_dev, xpad_abs[i]); | ||
367 | if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) | ||
368 | for (i = 0; xpad_abs_pad[i] >= 0; i++) | ||
369 | xpad_set_up_abs(input_dev, xpad_abs_pad[i]); | ||
370 | |||
371 | ep_irq_in = &intf->cur_altsetting->endpoint[0].desc; | ||
372 | usb_fill_int_urb(xpad->irq_in, udev, | ||
373 | usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress), | ||
374 | xpad->idata, XPAD_PKT_LEN, xpad_irq_in, | ||
375 | xpad, ep_irq_in->bInterval); | ||
376 | xpad->irq_in->transfer_dma = xpad->idata_dma; | ||
377 | xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | ||
378 | |||
379 | error = input_register_device(xpad->dev); | ||
380 | if (error) | ||
381 | goto fail3; | ||
382 | |||
383 | usb_set_intfdata(intf, xpad); | ||
384 | return 0; | ||
385 | |||
386 | fail3: usb_free_urb(xpad->irq_in); | ||
387 | fail2: usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); | ||
388 | fail1: input_free_device(input_dev); | ||
389 | kfree(xpad); | ||
390 | return error; | ||
391 | |||
392 | } | ||
393 | |||
394 | static void xpad_disconnect(struct usb_interface *intf) | ||
395 | { | ||
396 | struct usb_xpad *xpad = usb_get_intfdata (intf); | ||
397 | |||
398 | usb_set_intfdata(intf, NULL); | ||
399 | if (xpad) { | ||
400 | usb_kill_urb(xpad->irq_in); | ||
401 | input_unregister_device(xpad->dev); | ||
402 | usb_free_urb(xpad->irq_in); | ||
403 | usb_buffer_free(interface_to_usbdev(intf), XPAD_PKT_LEN, | ||
404 | xpad->idata, xpad->idata_dma); | ||
405 | kfree(xpad); | ||
406 | } | ||
407 | } | ||
408 | |||
409 | static struct usb_driver xpad_driver = { | ||
410 | .name = "xpad", | ||
411 | .probe = xpad_probe, | ||
412 | .disconnect = xpad_disconnect, | ||
413 | .id_table = xpad_table, | ||
414 | }; | ||
415 | |||
416 | static int __init usb_xpad_init(void) | ||
417 | { | ||
418 | int result = usb_register(&xpad_driver); | ||
419 | if (result == 0) | ||
420 | info(DRIVER_DESC ":" DRIVER_VERSION); | ||
421 | return result; | ||
422 | } | ||
423 | |||
424 | static void __exit usb_xpad_exit(void) | ||
425 | { | ||
426 | usb_deregister(&xpad_driver); | ||
427 | } | ||
428 | |||
429 | module_init(usb_xpad_init); | ||
430 | module_exit(usb_xpad_exit); | ||
431 | |||
432 | MODULE_AUTHOR(DRIVER_AUTHOR); | ||
433 | MODULE_DESCRIPTION(DRIVER_DESC); | ||
434 | MODULE_LICENSE("GPL"); | ||