1 files changed, 111 insertions, 0 deletions

diff --git a/drivers/infiniband/hw/ehca/ehca_sqp.c b/drivers/infiniband/hw/ehca/ehca_sqp.c
new file mode 100644
index 000000000000..9f16e9c79394
--- /dev/null
+++ b/drivers/infiniband/hw/ehca/ehca_sqp.c
@@ -0,0 +1,111 @@
+/*
+ *  IBM eServer eHCA Infiniband device driver for Linux on POWER
+ *
+ *  SQP functions
+ *
+ *  Authors: Khadija Souissi <souissi@de.ibm.com>
+ *           Heiko J Schick <schickhj@de.ibm.com>
+ *
+ *  Copyright (c) 2005 IBM Corporation
+ *
+ *  All rights reserved.
+ *
+ *  This source code is distributed under a dual license of GPL v2.0 and OpenIB
+ *  BSD.
+ *
+ * OpenIB BSD License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include "ehca_classes.h"
+#include "ehca_tools.h"
+#include "ehca_qes.h"
+#include "ehca_iverbs.h"
+#include "hcp_if.h"
+
+
+/**
+ * ehca_define_sqp - Defines special queue pair 1 (GSI QP). When special queue
+ * pair is created successfully, the corresponding port gets active.
+ *
+ * Define Special Queue pair 0 (SMI QP) is still not supported.
+ *
+ * @qp_init_attr: Queue pair init attributes with port and queue pair type
+ */
+
+u64 ehca_define_sqp(struct ehca_shca *shca,
+                    struct ehca_qp *ehca_qp,
+                    struct ib_qp_init_attr *qp_init_attr)
+{
+        u32 pma_qp_nr, bma_qp_nr;
+        u64 ret;
+        u8 port = qp_init_attr->port_num;
+        int counter;
+
+        shca->sport[port - 1].port_state = IB_PORT_DOWN;
+
+        switch (qp_init_attr->qp_type) {
+        case IB_QPT_SMI:
+                /* function not supported yet */
+                break;
+        case IB_QPT_GSI:
+                ret = hipz_h_define_aqp1(shca->ipz_hca_handle,
+                                         ehca_qp->ipz_qp_handle,
+                                         ehca_qp->galpas.kernel,
+                                         (u32) qp_init_attr->port_num,
+                                         &pma_qp_nr, &bma_qp_nr);
+
+                if (ret != H_SUCCESS) {
+                        ehca_err(&shca->ib_device,
+                                 "Can't define AQP1 for port %x. rc=%lx",
+                                 port, ret);
+                        return ret;
+                }
+                break;
+        default:
+                ehca_err(&shca->ib_device, "invalid qp_type=%x",
+                         qp_init_attr->qp_type);
+                return H_PARAMETER;
+        }
+
+        for (counter = 0;
+             shca->sport[port - 1].port_state != IB_PORT_ACTIVE &&
+                     counter < ehca_port_act_time;
+             counter++) {
+                ehca_dbg(&shca->ib_device, "... wait until port %x is active",
+                         port);
+                msleep_interruptible(1000);
+        }
+
+        if (counter == ehca_port_act_time) {
+                ehca_err(&shca->ib_device, "Port %x is not active.", port);
+                return H_HARDWARE;
+        }
+
+        return H_SUCCESS;
+}