1 files changed, 45 insertions, 4 deletions

diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index ecd59ef8c8a3..09e9291f1848 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -151,6 +151,11 @@ MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device (default = 1)"
  * - skip mode page 8
  *   Suppress sending of mode_sense for mode page 8 if the device pretends to
  *   support the SCSI Primary Block commands instead of Reduced Block Commands.
+ *
+ * - fix capacity
+ *   Tell sd_mod to correct the last sector number reported by read_capacity.
+ *   Avoids access beyond actual disk limits on devices with an off-by-one bug.
+ *   Don't use this with devices which don't have this bug.
  */
 static int sbp2_default_workarounds;
 module_param_named(workarounds, sbp2_default_workarounds, int, 0644);
@@ -158,6 +163,7 @@ MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0"
         ", 128kB max transfer = " __stringify(SBP2_WORKAROUND_128K_MAX_TRANS)
         ", 36 byte inquiry = "    __stringify(SBP2_WORKAROUND_INQUIRY_36)
         ", skip mode page 8 = "   __stringify(SBP2_WORKAROUND_MODE_SENSE_8)
+        ", fix capacity = "       __stringify(SBP2_WORKAROUND_FIX_CAPACITY)
         ", or a combination)");
 
 /* legacy parameter */
@@ -291,6 +297,7 @@ static struct hpsb_protocol_driver sbp2_driver = {
  */
 static const struct {
         u32 firmware_revision;
+        u32 model_id;
         unsigned workarounds;
 } sbp2_workarounds_table[] = {
         /* TSB42AA9 */ {
@@ -305,6 +312,31 @@ static const struct {
         /* Symbios bridge */ {
                 .firmware_revision      = 0xa0b800,
                 .workarounds            = SBP2_WORKAROUND_128K_MAX_TRANS,
+        },
+        /*
+         * Note about the following Apple iPod blacklist entries:
+         *
+         * There are iPods (2nd gen, 3rd gen) with model_id==0.  Since our
+         * matching logic treats 0 as a wildcard, we cannot match this ID
+         * without rewriting the matching routine.  Fortunately these iPods
+         * do not feature the read_capacity bug according to one report.
+         * Read_capacity behaviour as well as model_id could change due to
+         * Apple-supplied firmware updates though.
+         */
+        /* iPod 4th generation */ {
+                .firmware_revision      = 0x0a2700,
+                .model_id               = 0x000021,
+                .workarounds            = SBP2_WORKAROUND_FIX_CAPACITY,
+        },
+        /* iPod mini */ {
+                .firmware_revision      = 0x0a2700,
+                .model_id               = 0x000023,
+                .workarounds            = SBP2_WORKAROUND_FIX_CAPACITY,
+        },
+        /* iPod Photo */ {
+                .firmware_revision      = 0x0a2700,
+                .model_id               = 0x00007e,
+                .workarounds            = SBP2_WORKAROUND_FIX_CAPACITY,
         }
 };
 
@@ -1556,18 +1588,25 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
         }
 
         for (i = 0; i < ARRAY_SIZE(sbp2_workarounds_table); i++) {
-                if (sbp2_workarounds_table[i].firmware_revision !=
+                if (sbp2_workarounds_table[i].firmware_revision &&
+                    sbp2_workarounds_table[i].firmware_revision !=
                     (firmware_revision & 0xffff00))
                         continue;
+                if (sbp2_workarounds_table[i].model_id &&
+                    sbp2_workarounds_table[i].model_id != ud->model_id)
+                        continue;
                 workarounds |= sbp2_workarounds_table[i].workarounds;
                 break;
         }
 
         if (workarounds)
-                SBP2_INFO("Workarounds for node " NODE_BUS_FMT ": "
-                          "0x%x (firmware_revision 0x%x)",
+                SBP2_INFO("Workarounds for node " NODE_BUS_FMT ": 0x%x "
+                          "(firmware_revision 0x%06x, vendor_id 0x%06x,"
+                          " model_id 0x%06x)",
                           NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
-                          workarounds, firmware_revision);
+                          workarounds, firmware_revision,
+                          ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id,
+                          ud->model_id);
 
         /* We would need one SCSI host template for each target to adjust
          * max_sectors on the fly, therefore warn only. */
@@ -2488,6 +2527,8 @@ static int sbp2scsi_slave_configure(struct scsi_device *sdev)
         if (sdev->type == TYPE_DISK &&
             scsi_id->workarounds & SBP2_WORKAROUND_MODE_SENSE_8)
                 sdev->skip_ms_page_8 = 1;
+        if (scsi_id->workarounds & SBP2_WORKAROUND_FIX_CAPACITY)
+                sdev->fix_capacity = 1;
         return 0;
 }