diff options
Diffstat (limited to 'drivers/ieee1394/ohci1394.c')
-rw-r--r-- | drivers/ieee1394/ohci1394.c | 3705 |
1 files changed, 3705 insertions, 0 deletions
diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c new file mode 100644 index 000000000000..97ff364c0434 --- /dev/null +++ b/drivers/ieee1394/ohci1394.c | |||
@@ -0,0 +1,3705 @@ | |||
1 | /* | ||
2 | * ohci1394.c - driver for OHCI 1394 boards | ||
3 | * Copyright (C)1999,2000 Sebastien Rougeaux <sebastien.rougeaux@anu.edu.au> | ||
4 | * Gord Peters <GordPeters@smarttech.com> | ||
5 | * 2001 Ben Collins <bcollins@debian.org> | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify | ||
8 | * it under the terms of the GNU General Public License as published by | ||
9 | * the Free Software Foundation; either version 2 of the License, or | ||
10 | * (at your option) any later version. | ||
11 | * | ||
12 | * This program is distributed in the hope that it will be useful, | ||
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
15 | * GNU General Public License for more details. | ||
16 | * | ||
17 | * You should have received a copy of the GNU General Public License | ||
18 | * along with this program; if not, write to the Free Software Foundation, | ||
19 | * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | ||
20 | */ | ||
21 | |||
22 | /* | ||
23 | * Things known to be working: | ||
24 | * . Async Request Transmit | ||
25 | * . Async Response Receive | ||
26 | * . Async Request Receive | ||
27 | * . Async Response Transmit | ||
28 | * . Iso Receive | ||
29 | * . DMA mmap for iso receive | ||
30 | * . Config ROM generation | ||
31 | * | ||
32 | * Things implemented, but still in test phase: | ||
33 | * . Iso Transmit | ||
34 | * . Async Stream Packets Transmit (Receive done via Iso interface) | ||
35 | * | ||
36 | * Things not implemented: | ||
37 | * . DMA error recovery | ||
38 | * | ||
39 | * Known bugs: | ||
40 | * . devctl BUS_RESET arg confusion (reset type or root holdoff?) | ||
41 | * added LONG_RESET_ROOT and SHORT_RESET_ROOT for root holdoff --kk | ||
42 | */ | ||
43 | |||
44 | /* | ||
45 | * Acknowledgments: | ||
46 | * | ||
47 | * Adam J Richter <adam@yggdrasil.com> | ||
48 | * . Use of pci_class to find device | ||
49 | * | ||
50 | * Emilie Chung <emilie.chung@axis.com> | ||
51 | * . Tip on Async Request Filter | ||
52 | * | ||
53 | * Pascal Drolet <pascal.drolet@informission.ca> | ||
54 | * . Various tips for optimization and functionnalities | ||
55 | * | ||
56 | * Robert Ficklin <rficklin@westengineering.com> | ||
57 | * . Loop in irq_handler | ||
58 | * | ||
59 | * James Goodwin <jamesg@Filanet.com> | ||
60 | * . Various tips on initialization, self-id reception, etc. | ||
61 | * | ||
62 | * Albrecht Dress <ad@mpifr-bonn.mpg.de> | ||
63 | * . Apple PowerBook detection | ||
64 | * | ||
65 | * Daniel Kobras <daniel.kobras@student.uni-tuebingen.de> | ||
66 | * . Reset the board properly before leaving + misc cleanups | ||
67 | * | ||
68 | * Leon van Stuivenberg <leonvs@iae.nl> | ||
69 | * . Bug fixes | ||
70 | * | ||
71 | * Ben Collins <bcollins@debian.org> | ||
72 | * . Working big-endian support | ||
73 | * . Updated to 2.4.x module scheme (PCI aswell) | ||
74 | * . Config ROM generation | ||
75 | * | ||
76 | * Manfred Weihs <weihs@ict.tuwien.ac.at> | ||
77 | * . Reworked code for initiating bus resets | ||
78 | * (long, short, with or without hold-off) | ||
79 | * | ||
80 | * Nandu Santhi <contactnandu@users.sourceforge.net> | ||
81 | * . Added support for nVidia nForce2 onboard Firewire chipset | ||
82 | * | ||
83 | */ | ||
84 | |||
85 | #include <linux/config.h> | ||
86 | #include <linux/kernel.h> | ||
87 | #include <linux/list.h> | ||
88 | #include <linux/slab.h> | ||
89 | #include <linux/interrupt.h> | ||
90 | #include <linux/wait.h> | ||
91 | #include <linux/errno.h> | ||
92 | #include <linux/module.h> | ||
93 | #include <linux/moduleparam.h> | ||
94 | #include <linux/pci.h> | ||
95 | #include <linux/fs.h> | ||
96 | #include <linux/poll.h> | ||
97 | #include <asm/byteorder.h> | ||
98 | #include <asm/atomic.h> | ||
99 | #include <asm/uaccess.h> | ||
100 | #include <linux/delay.h> | ||
101 | #include <linux/spinlock.h> | ||
102 | |||
103 | #include <asm/pgtable.h> | ||
104 | #include <asm/page.h> | ||
105 | #include <asm/irq.h> | ||
106 | #include <linux/sched.h> | ||
107 | #include <linux/types.h> | ||
108 | #include <linux/vmalloc.h> | ||
109 | #include <linux/init.h> | ||
110 | |||
111 | #ifdef CONFIG_PPC_PMAC | ||
112 | #include <asm/machdep.h> | ||
113 | #include <asm/pmac_feature.h> | ||
114 | #include <asm/prom.h> | ||
115 | #include <asm/pci-bridge.h> | ||
116 | #endif | ||
117 | |||
118 | #include "csr1212.h" | ||
119 | #include "ieee1394.h" | ||
120 | #include "ieee1394_types.h" | ||
121 | #include "hosts.h" | ||
122 | #include "dma.h" | ||
123 | #include "iso.h" | ||
124 | #include "ieee1394_core.h" | ||
125 | #include "highlevel.h" | ||
126 | #include "ohci1394.h" | ||
127 | |||
128 | #ifdef CONFIG_IEEE1394_VERBOSEDEBUG | ||
129 | #define OHCI1394_DEBUG | ||
130 | #endif | ||
131 | |||
132 | #ifdef DBGMSG | ||
133 | #undef DBGMSG | ||
134 | #endif | ||
135 | |||
136 | #ifdef OHCI1394_DEBUG | ||
137 | #define DBGMSG(fmt, args...) \ | ||
138 | printk(KERN_INFO "%s: fw-host%d: " fmt "\n" , OHCI1394_DRIVER_NAME, ohci->host->id , ## args) | ||
139 | #else | ||
140 | #define DBGMSG(fmt, args...) | ||
141 | #endif | ||
142 | |||
143 | #ifdef CONFIG_IEEE1394_OHCI_DMA_DEBUG | ||
144 | #define OHCI_DMA_ALLOC(fmt, args...) \ | ||
145 | HPSB_ERR("%s(%s)alloc(%d): "fmt, OHCI1394_DRIVER_NAME, __FUNCTION__, \ | ||
146 | ++global_outstanding_dmas, ## args) | ||
147 | #define OHCI_DMA_FREE(fmt, args...) \ | ||
148 | HPSB_ERR("%s(%s)free(%d): "fmt, OHCI1394_DRIVER_NAME, __FUNCTION__, \ | ||
149 | --global_outstanding_dmas, ## args) | ||
150 | static int global_outstanding_dmas = 0; | ||
151 | #else | ||
152 | #define OHCI_DMA_ALLOC(fmt, args...) | ||
153 | #define OHCI_DMA_FREE(fmt, args...) | ||
154 | #endif | ||
155 | |||
156 | /* print general (card independent) information */ | ||
157 | #define PRINT_G(level, fmt, args...) \ | ||
158 | printk(level "%s: " fmt "\n" , OHCI1394_DRIVER_NAME , ## args) | ||
159 | |||
160 | /* print card specific information */ | ||
161 | #define PRINT(level, fmt, args...) \ | ||
162 | printk(level "%s: fw-host%d: " fmt "\n" , OHCI1394_DRIVER_NAME, ohci->host->id , ## args) | ||
163 | |||
164 | static char version[] __devinitdata = | ||
165 | "$Rev: 1250 $ Ben Collins <bcollins@debian.org>"; | ||
166 | |||
167 | /* Module Parameters */ | ||
168 | static int phys_dma = 1; | ||
169 | module_param(phys_dma, int, 0644); | ||
170 | MODULE_PARM_DESC(phys_dma, "Enable physical dma (default = 1)."); | ||
171 | |||
172 | static void dma_trm_tasklet(unsigned long data); | ||
173 | static void dma_trm_reset(struct dma_trm_ctx *d); | ||
174 | |||
175 | static int alloc_dma_rcv_ctx(struct ti_ohci *ohci, struct dma_rcv_ctx *d, | ||
176 | enum context_type type, int ctx, int num_desc, | ||
177 | int buf_size, int split_buf_size, int context_base); | ||
178 | static void stop_dma_rcv_ctx(struct dma_rcv_ctx *d); | ||
179 | static void free_dma_rcv_ctx(struct dma_rcv_ctx *d); | ||
180 | |||
181 | static int alloc_dma_trm_ctx(struct ti_ohci *ohci, struct dma_trm_ctx *d, | ||
182 | enum context_type type, int ctx, int num_desc, | ||
183 | int context_base); | ||
184 | |||
185 | static void ohci1394_pci_remove(struct pci_dev *pdev); | ||
186 | |||
187 | #ifndef __LITTLE_ENDIAN | ||
188 | static unsigned hdr_sizes[] = | ||
189 | { | ||
190 | 3, /* TCODE_WRITEQ */ | ||
191 | 4, /* TCODE_WRITEB */ | ||
192 | 3, /* TCODE_WRITE_RESPONSE */ | ||
193 | 0, /* ??? */ | ||
194 | 3, /* TCODE_READQ */ | ||
195 | 4, /* TCODE_READB */ | ||
196 | 3, /* TCODE_READQ_RESPONSE */ | ||
197 | 4, /* TCODE_READB_RESPONSE */ | ||
198 | 1, /* TCODE_CYCLE_START (???) */ | ||
199 | 4, /* TCODE_LOCK_REQUEST */ | ||
200 | 2, /* TCODE_ISO_DATA */ | ||
201 | 4, /* TCODE_LOCK_RESPONSE */ | ||
202 | }; | ||
203 | |||
204 | /* Swap headers */ | ||
205 | static inline void packet_swab(quadlet_t *data, int tcode) | ||
206 | { | ||
207 | size_t size = hdr_sizes[tcode]; | ||
208 | |||
209 | if (tcode > TCODE_LOCK_RESPONSE || hdr_sizes[tcode] == 0) | ||
210 | return; | ||
211 | |||
212 | while (size--) | ||
213 | data[size] = swab32(data[size]); | ||
214 | } | ||
215 | #else | ||
216 | /* Don't waste cycles on same sex byte swaps */ | ||
217 | #define packet_swab(w,x) | ||
218 | #endif /* !LITTLE_ENDIAN */ | ||
219 | |||
220 | /*********************************** | ||
221 | * IEEE-1394 functionality section * | ||
222 | ***********************************/ | ||
223 | |||
224 | static u8 get_phy_reg(struct ti_ohci *ohci, u8 addr) | ||
225 | { | ||
226 | int i; | ||
227 | unsigned long flags; | ||
228 | quadlet_t r; | ||
229 | |||
230 | spin_lock_irqsave (&ohci->phy_reg_lock, flags); | ||
231 | |||
232 | reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | 0x00008000); | ||
233 | |||
234 | for (i = 0; i < OHCI_LOOP_COUNT; i++) { | ||
235 | if (reg_read(ohci, OHCI1394_PhyControl) & 0x80000000) | ||
236 | break; | ||
237 | |||
238 | mdelay(1); | ||
239 | } | ||
240 | |||
241 | r = reg_read(ohci, OHCI1394_PhyControl); | ||
242 | |||
243 | if (i >= OHCI_LOOP_COUNT) | ||
244 | PRINT (KERN_ERR, "Get PHY Reg timeout [0x%08x/0x%08x/%d]", | ||
245 | r, r & 0x80000000, i); | ||
246 | |||
247 | spin_unlock_irqrestore (&ohci->phy_reg_lock, flags); | ||
248 | |||
249 | return (r & 0x00ff0000) >> 16; | ||
250 | } | ||
251 | |||
252 | static void set_phy_reg(struct ti_ohci *ohci, u8 addr, u8 data) | ||
253 | { | ||
254 | int i; | ||
255 | unsigned long flags; | ||
256 | u32 r = 0; | ||
257 | |||
258 | spin_lock_irqsave (&ohci->phy_reg_lock, flags); | ||
259 | |||
260 | reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | data | 0x00004000); | ||
261 | |||
262 | for (i = 0; i < OHCI_LOOP_COUNT; i++) { | ||
263 | r = reg_read(ohci, OHCI1394_PhyControl); | ||
264 | if (!(r & 0x00004000)) | ||
265 | break; | ||
266 | |||
267 | mdelay(1); | ||
268 | } | ||
269 | |||
270 | if (i == OHCI_LOOP_COUNT) | ||
271 | PRINT (KERN_ERR, "Set PHY Reg timeout [0x%08x/0x%08x/%d]", | ||
272 | r, r & 0x00004000, i); | ||
273 | |||
274 | spin_unlock_irqrestore (&ohci->phy_reg_lock, flags); | ||
275 | |||
276 | return; | ||
277 | } | ||
278 | |||
279 | /* Or's our value into the current value */ | ||
280 | static void set_phy_reg_mask(struct ti_ohci *ohci, u8 addr, u8 data) | ||
281 | { | ||
282 | u8 old; | ||
283 | |||
284 | old = get_phy_reg (ohci, addr); | ||
285 | old |= data; | ||
286 | set_phy_reg (ohci, addr, old); | ||
287 | |||
288 | return; | ||
289 | } | ||
290 | |||
291 | static void handle_selfid(struct ti_ohci *ohci, struct hpsb_host *host, | ||
292 | int phyid, int isroot) | ||
293 | { | ||
294 | quadlet_t *q = ohci->selfid_buf_cpu; | ||
295 | quadlet_t self_id_count=reg_read(ohci, OHCI1394_SelfIDCount); | ||
296 | size_t size; | ||
297 | quadlet_t q0, q1; | ||
298 | |||
299 | /* Check status of self-id reception */ | ||
300 | |||
301 | if (ohci->selfid_swap) | ||
302 | q0 = le32_to_cpu(q[0]); | ||
303 | else | ||
304 | q0 = q[0]; | ||
305 | |||
306 | if ((self_id_count & 0x80000000) || | ||
307 | ((self_id_count & 0x00FF0000) != (q0 & 0x00FF0000))) { | ||
308 | PRINT(KERN_ERR, | ||
309 | "Error in reception of SelfID packets [0x%08x/0x%08x] (count: %d)", | ||
310 | self_id_count, q0, ohci->self_id_errors); | ||
311 | |||
312 | /* Tip by James Goodwin <jamesg@Filanet.com>: | ||
313 | * We had an error, generate another bus reset in response. */ | ||
314 | if (ohci->self_id_errors<OHCI1394_MAX_SELF_ID_ERRORS) { | ||
315 | set_phy_reg_mask (ohci, 1, 0x40); | ||
316 | ohci->self_id_errors++; | ||
317 | } else { | ||
318 | PRINT(KERN_ERR, | ||
319 | "Too many errors on SelfID error reception, giving up!"); | ||
320 | } | ||
321 | return; | ||
322 | } | ||
323 | |||
324 | /* SelfID Ok, reset error counter. */ | ||
325 | ohci->self_id_errors = 0; | ||
326 | |||
327 | size = ((self_id_count & 0x00001FFC) >> 2) - 1; | ||
328 | q++; | ||
329 | |||
330 | while (size > 0) { | ||
331 | if (ohci->selfid_swap) { | ||
332 | q0 = le32_to_cpu(q[0]); | ||
333 | q1 = le32_to_cpu(q[1]); | ||
334 | } else { | ||
335 | q0 = q[0]; | ||
336 | q1 = q[1]; | ||
337 | } | ||
338 | |||
339 | if (q0 == ~q1) { | ||
340 | DBGMSG ("SelfID packet 0x%x received", q0); | ||
341 | hpsb_selfid_received(host, cpu_to_be32(q0)); | ||
342 | if (((q0 & 0x3f000000) >> 24) == phyid) | ||
343 | DBGMSG ("SelfID for this node is 0x%08x", q0); | ||
344 | } else { | ||
345 | PRINT(KERN_ERR, | ||
346 | "SelfID is inconsistent [0x%08x/0x%08x]", q0, q1); | ||
347 | } | ||
348 | q += 2; | ||
349 | size -= 2; | ||
350 | } | ||
351 | |||
352 | DBGMSG("SelfID complete"); | ||
353 | |||
354 | return; | ||
355 | } | ||
356 | |||
357 | static void ohci_soft_reset(struct ti_ohci *ohci) { | ||
358 | int i; | ||
359 | |||
360 | reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset); | ||
361 | |||
362 | for (i = 0; i < OHCI_LOOP_COUNT; i++) { | ||
363 | if (!(reg_read(ohci, OHCI1394_HCControlSet) & OHCI1394_HCControl_softReset)) | ||
364 | break; | ||
365 | mdelay(1); | ||
366 | } | ||
367 | DBGMSG ("Soft reset finished"); | ||
368 | } | ||
369 | |||
370 | |||
371 | /* Generate the dma receive prgs and start the context */ | ||
372 | static void initialize_dma_rcv_ctx(struct dma_rcv_ctx *d, int generate_irq) | ||
373 | { | ||
374 | struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci); | ||
375 | int i; | ||
376 | |||
377 | ohci1394_stop_context(ohci, d->ctrlClear, NULL); | ||
378 | |||
379 | for (i=0; i<d->num_desc; i++) { | ||
380 | u32 c; | ||
381 | |||
382 | c = DMA_CTL_INPUT_MORE | DMA_CTL_UPDATE | DMA_CTL_BRANCH; | ||
383 | if (generate_irq) | ||
384 | c |= DMA_CTL_IRQ; | ||
385 | |||
386 | d->prg_cpu[i]->control = cpu_to_le32(c | d->buf_size); | ||
387 | |||
388 | /* End of descriptor list? */ | ||
389 | if (i + 1 < d->num_desc) { | ||
390 | d->prg_cpu[i]->branchAddress = | ||
391 | cpu_to_le32((d->prg_bus[i+1] & 0xfffffff0) | 0x1); | ||
392 | } else { | ||
393 | d->prg_cpu[i]->branchAddress = | ||
394 | cpu_to_le32((d->prg_bus[0] & 0xfffffff0)); | ||
395 | } | ||
396 | |||
397 | d->prg_cpu[i]->address = cpu_to_le32(d->buf_bus[i]); | ||
398 | d->prg_cpu[i]->status = cpu_to_le32(d->buf_size); | ||
399 | } | ||
400 | |||
401 | d->buf_ind = 0; | ||
402 | d->buf_offset = 0; | ||
403 | |||
404 | if (d->type == DMA_CTX_ISO) { | ||
405 | /* Clear contextControl */ | ||
406 | reg_write(ohci, d->ctrlClear, 0xffffffff); | ||
407 | |||
408 | /* Set bufferFill, isochHeader, multichannel for IR context */ | ||
409 | reg_write(ohci, d->ctrlSet, 0xd0000000); | ||
410 | |||
411 | /* Set the context match register to match on all tags */ | ||
412 | reg_write(ohci, d->ctxtMatch, 0xf0000000); | ||
413 | |||
414 | /* Clear the multi channel mask high and low registers */ | ||
415 | reg_write(ohci, OHCI1394_IRMultiChanMaskHiClear, 0xffffffff); | ||
416 | reg_write(ohci, OHCI1394_IRMultiChanMaskLoClear, 0xffffffff); | ||
417 | |||
418 | /* Set up isoRecvIntMask to generate interrupts */ | ||
419 | reg_write(ohci, OHCI1394_IsoRecvIntMaskSet, 1 << d->ctx); | ||
420 | } | ||
421 | |||
422 | /* Tell the controller where the first AR program is */ | ||
423 | reg_write(ohci, d->cmdPtr, d->prg_bus[0] | 0x1); | ||
424 | |||
425 | /* Run context */ | ||
426 | reg_write(ohci, d->ctrlSet, 0x00008000); | ||
427 | |||
428 | DBGMSG("Receive DMA ctx=%d initialized", d->ctx); | ||
429 | } | ||
430 | |||
431 | /* Initialize the dma transmit context */ | ||
432 | static void initialize_dma_trm_ctx(struct dma_trm_ctx *d) | ||
433 | { | ||
434 | struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci); | ||
435 | |||
436 | /* Stop the context */ | ||
437 | ohci1394_stop_context(ohci, d->ctrlClear, NULL); | ||
438 | |||
439 | d->prg_ind = 0; | ||
440 | d->sent_ind = 0; | ||
441 | d->free_prgs = d->num_desc; | ||
442 | d->branchAddrPtr = NULL; | ||
443 | INIT_LIST_HEAD(&d->fifo_list); | ||
444 | INIT_LIST_HEAD(&d->pending_list); | ||
445 | |||
446 | if (d->type == DMA_CTX_ISO) { | ||
447 | /* enable interrupts */ | ||
448 | reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, 1 << d->ctx); | ||
449 | } | ||
450 | |||
451 | DBGMSG("Transmit DMA ctx=%d initialized", d->ctx); | ||
452 | } | ||
453 | |||
454 | /* Count the number of available iso contexts */ | ||
455 | static int get_nb_iso_ctx(struct ti_ohci *ohci, int reg) | ||
456 | { | ||
457 | int i,ctx=0; | ||
458 | u32 tmp; | ||
459 | |||
460 | reg_write(ohci, reg, 0xffffffff); | ||
461 | tmp = reg_read(ohci, reg); | ||
462 | |||
463 | DBGMSG("Iso contexts reg: %08x implemented: %08x", reg, tmp); | ||
464 | |||
465 | /* Count the number of contexts */ | ||
466 | for (i=0; i<32; i++) { | ||
467 | if (tmp & 1) ctx++; | ||
468 | tmp >>= 1; | ||
469 | } | ||
470 | return ctx; | ||
471 | } | ||
472 | |||
473 | /* Global initialization */ | ||
474 | static void ohci_initialize(struct ti_ohci *ohci) | ||
475 | { | ||
476 | char irq_buf[16]; | ||
477 | quadlet_t buf; | ||
478 | int num_ports, i; | ||
479 | |||
480 | spin_lock_init(&ohci->phy_reg_lock); | ||
481 | spin_lock_init(&ohci->event_lock); | ||
482 | |||
483 | /* Put some defaults to these undefined bus options */ | ||
484 | buf = reg_read(ohci, OHCI1394_BusOptions); | ||
485 | buf |= 0x60000000; /* Enable CMC and ISC */ | ||
486 | if (!hpsb_disable_irm) | ||
487 | buf |= 0x80000000; /* Enable IRMC */ | ||
488 | buf &= ~0x00ff0000; /* XXX: Set cyc_clk_acc to zero for now */ | ||
489 | buf &= ~0x18000000; /* Disable PMC and BMC */ | ||
490 | reg_write(ohci, OHCI1394_BusOptions, buf); | ||
491 | |||
492 | /* Set the bus number */ | ||
493 | reg_write(ohci, OHCI1394_NodeID, 0x0000ffc0); | ||
494 | |||
495 | /* Enable posted writes */ | ||
496 | reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_postedWriteEnable); | ||
497 | |||
498 | /* Clear link control register */ | ||
499 | reg_write(ohci, OHCI1394_LinkControlClear, 0xffffffff); | ||
500 | |||
501 | /* Enable cycle timer and cycle master and set the IRM | ||
502 | * contender bit in our self ID packets if appropriate. */ | ||
503 | reg_write(ohci, OHCI1394_LinkControlSet, | ||
504 | OHCI1394_LinkControl_CycleTimerEnable | | ||
505 | OHCI1394_LinkControl_CycleMaster); | ||
506 | set_phy_reg_mask(ohci, 4, PHY_04_LCTRL | | ||
507 | (hpsb_disable_irm ? 0 : PHY_04_CONTENDER)); | ||
508 | |||
509 | /* Set up self-id dma buffer */ | ||
510 | reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->selfid_buf_bus); | ||
511 | |||
512 | /* enable self-id and phys */ | ||
513 | reg_write(ohci, OHCI1394_LinkControlSet, OHCI1394_LinkControl_RcvSelfID | | ||
514 | OHCI1394_LinkControl_RcvPhyPkt); | ||
515 | |||
516 | /* Set the Config ROM mapping register */ | ||
517 | reg_write(ohci, OHCI1394_ConfigROMmap, ohci->csr_config_rom_bus); | ||
518 | |||
519 | /* Now get our max packet size */ | ||
520 | ohci->max_packet_size = | ||
521 | 1<<(((reg_read(ohci, OHCI1394_BusOptions)>>12)&0xf)+1); | ||
522 | |||
523 | /* Don't accept phy packets into AR request context */ | ||
524 | reg_write(ohci, OHCI1394_LinkControlClear, 0x00000400); | ||
525 | |||
526 | /* Clear the interrupt mask */ | ||
527 | reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 0xffffffff); | ||
528 | reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 0xffffffff); | ||
529 | |||
530 | /* Clear the interrupt mask */ | ||
531 | reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff); | ||
532 | reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff); | ||
533 | |||
534 | /* Initialize AR dma */ | ||
535 | initialize_dma_rcv_ctx(&ohci->ar_req_context, 0); | ||
536 | initialize_dma_rcv_ctx(&ohci->ar_resp_context, 0); | ||
537 | |||
538 | /* Initialize AT dma */ | ||
539 | initialize_dma_trm_ctx(&ohci->at_req_context); | ||
540 | initialize_dma_trm_ctx(&ohci->at_resp_context); | ||
541 | |||
542 | /* Initialize IR Legacy DMA */ | ||
543 | ohci->ir_legacy_channels = 0; | ||
544 | initialize_dma_rcv_ctx(&ohci->ir_legacy_context, 1); | ||
545 | DBGMSG("ISO receive legacy context activated"); | ||
546 | |||
547 | /* | ||
548 | * Accept AT requests from all nodes. This probably | ||
549 | * will have to be controlled from the subsystem | ||
550 | * on a per node basis. | ||
551 | */ | ||
552 | reg_write(ohci,OHCI1394_AsReqFilterHiSet, 0x80000000); | ||
553 | |||
554 | /* Specify AT retries */ | ||
555 | reg_write(ohci, OHCI1394_ATRetries, | ||
556 | OHCI1394_MAX_AT_REQ_RETRIES | | ||
557 | (OHCI1394_MAX_AT_RESP_RETRIES<<4) | | ||
558 | (OHCI1394_MAX_PHYS_RESP_RETRIES<<8)); | ||
559 | |||
560 | /* We don't want hardware swapping */ | ||
561 | reg_write(ohci, OHCI1394_HCControlClear, OHCI1394_HCControl_noByteSwap); | ||
562 | |||
563 | /* Enable interrupts */ | ||
564 | reg_write(ohci, OHCI1394_IntMaskSet, | ||
565 | OHCI1394_unrecoverableError | | ||
566 | OHCI1394_masterIntEnable | | ||
567 | OHCI1394_busReset | | ||
568 | OHCI1394_selfIDComplete | | ||
569 | OHCI1394_RSPkt | | ||
570 | OHCI1394_RQPkt | | ||
571 | OHCI1394_respTxComplete | | ||
572 | OHCI1394_reqTxComplete | | ||
573 | OHCI1394_isochRx | | ||
574 | OHCI1394_isochTx | | ||
575 | OHCI1394_cycleInconsistent); | ||
576 | |||
577 | /* Enable link */ | ||
578 | reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_linkEnable); | ||
579 | |||
580 | buf = reg_read(ohci, OHCI1394_Version); | ||
581 | #ifndef __sparc__ | ||
582 | sprintf (irq_buf, "%d", ohci->dev->irq); | ||
583 | #else | ||
584 | sprintf (irq_buf, "%s", __irq_itoa(ohci->dev->irq)); | ||
585 | #endif | ||
586 | PRINT(KERN_INFO, "OHCI-1394 %d.%d (PCI): IRQ=[%s] " | ||
587 | "MMIO=[%lx-%lx] Max Packet=[%d]", | ||
588 | ((((buf) >> 16) & 0xf) + (((buf) >> 20) & 0xf) * 10), | ||
589 | ((((buf) >> 4) & 0xf) + ((buf) & 0xf) * 10), irq_buf, | ||
590 | pci_resource_start(ohci->dev, 0), | ||
591 | pci_resource_start(ohci->dev, 0) + OHCI1394_REGISTER_SIZE - 1, | ||
592 | ohci->max_packet_size); | ||
593 | |||
594 | /* Check all of our ports to make sure that if anything is | ||
595 | * connected, we enable that port. */ | ||
596 | num_ports = get_phy_reg(ohci, 2) & 0xf; | ||
597 | for (i = 0; i < num_ports; i++) { | ||
598 | unsigned int status; | ||
599 | |||
600 | set_phy_reg(ohci, 7, i); | ||
601 | status = get_phy_reg(ohci, 8); | ||
602 | |||
603 | if (status & 0x20) | ||
604 | set_phy_reg(ohci, 8, status & ~1); | ||
605 | } | ||
606 | |||
607 | /* Serial EEPROM Sanity check. */ | ||
608 | if ((ohci->max_packet_size < 512) || | ||
609 | (ohci->max_packet_size > 4096)) { | ||
610 | /* Serial EEPROM contents are suspect, set a sane max packet | ||
611 | * size and print the raw contents for bug reports if verbose | ||
612 | * debug is enabled. */ | ||
613 | #ifdef CONFIG_IEEE1394_VERBOSEDEBUG | ||
614 | int i; | ||
615 | #endif | ||
616 | |||
617 | PRINT(KERN_DEBUG, "Serial EEPROM has suspicious values, " | ||
618 | "attempting to setting max_packet_size to 512 bytes"); | ||
619 | reg_write(ohci, OHCI1394_BusOptions, | ||
620 | (reg_read(ohci, OHCI1394_BusOptions) & 0xf007) | 0x8002); | ||
621 | ohci->max_packet_size = 512; | ||
622 | #ifdef CONFIG_IEEE1394_VERBOSEDEBUG | ||
623 | PRINT(KERN_DEBUG, " EEPROM Present: %d", | ||
624 | (reg_read(ohci, OHCI1394_Version) >> 24) & 0x1); | ||
625 | reg_write(ohci, OHCI1394_GUID_ROM, 0x80000000); | ||
626 | |||
627 | for (i = 0; | ||
628 | ((i < 1000) && | ||
629 | (reg_read(ohci, OHCI1394_GUID_ROM) & 0x80000000)); i++) | ||
630 | udelay(10); | ||
631 | |||
632 | for (i = 0; i < 0x20; i++) { | ||
633 | reg_write(ohci, OHCI1394_GUID_ROM, 0x02000000); | ||
634 | PRINT(KERN_DEBUG, " EEPROM %02x: %02x", i, | ||
635 | (reg_read(ohci, OHCI1394_GUID_ROM) >> 16) & 0xff); | ||
636 | } | ||
637 | #endif | ||
638 | } | ||
639 | } | ||
640 | |||
641 | /* | ||
642 | * Insert a packet in the DMA fifo and generate the DMA prg | ||
643 | * FIXME: rewrite the program in order to accept packets crossing | ||
644 | * page boundaries. | ||
645 | * check also that a single dma descriptor doesn't cross a | ||
646 | * page boundary. | ||
647 | */ | ||
648 | static void insert_packet(struct ti_ohci *ohci, | ||
649 | struct dma_trm_ctx *d, struct hpsb_packet *packet) | ||
650 | { | ||
651 | u32 cycleTimer; | ||
652 | int idx = d->prg_ind; | ||
653 | |||
654 | DBGMSG("Inserting packet for node " NODE_BUS_FMT | ||
655 | ", tlabel=%d, tcode=0x%x, speed=%d", | ||
656 | NODE_BUS_ARGS(ohci->host, packet->node_id), packet->tlabel, | ||
657 | packet->tcode, packet->speed_code); | ||
658 | |||
659 | d->prg_cpu[idx]->begin.address = 0; | ||
660 | d->prg_cpu[idx]->begin.branchAddress = 0; | ||
661 | |||
662 | if (d->type == DMA_CTX_ASYNC_RESP) { | ||
663 | /* | ||
664 | * For response packets, we need to put a timeout value in | ||
665 | * the 16 lower bits of the status... let's try 1 sec timeout | ||
666 | */ | ||
667 | cycleTimer = reg_read(ohci, OHCI1394_IsochronousCycleTimer); | ||
668 | d->prg_cpu[idx]->begin.status = cpu_to_le32( | ||
669 | (((((cycleTimer>>25)&0x7)+1)&0x7)<<13) | | ||
670 | ((cycleTimer&0x01fff000)>>12)); | ||
671 | |||
672 | DBGMSG("cycleTimer: %08x timeStamp: %08x", | ||
673 | cycleTimer, d->prg_cpu[idx]->begin.status); | ||
674 | } else | ||
675 | d->prg_cpu[idx]->begin.status = 0; | ||
676 | |||
677 | if ( (packet->type == hpsb_async) || (packet->type == hpsb_raw) ) { | ||
678 | |||
679 | if (packet->type == hpsb_raw) { | ||
680 | d->prg_cpu[idx]->data[0] = cpu_to_le32(OHCI1394_TCODE_PHY<<4); | ||
681 | d->prg_cpu[idx]->data[1] = cpu_to_le32(packet->header[0]); | ||
682 | d->prg_cpu[idx]->data[2] = cpu_to_le32(packet->header[1]); | ||
683 | } else { | ||
684 | d->prg_cpu[idx]->data[0] = packet->speed_code<<16 | | ||
685 | (packet->header[0] & 0xFFFF); | ||
686 | |||
687 | if (packet->tcode == TCODE_ISO_DATA) { | ||
688 | /* Sending an async stream packet */ | ||
689 | d->prg_cpu[idx]->data[1] = packet->header[0] & 0xFFFF0000; | ||
690 | } else { | ||
691 | /* Sending a normal async request or response */ | ||
692 | d->prg_cpu[idx]->data[1] = | ||
693 | (packet->header[1] & 0xFFFF) | | ||
694 | (packet->header[0] & 0xFFFF0000); | ||
695 | d->prg_cpu[idx]->data[2] = packet->header[2]; | ||
696 | d->prg_cpu[idx]->data[3] = packet->header[3]; | ||
697 | } | ||
698 | packet_swab(d->prg_cpu[idx]->data, packet->tcode); | ||
699 | } | ||
700 | |||
701 | if (packet->data_size) { /* block transmit */ | ||
702 | if (packet->tcode == TCODE_STREAM_DATA){ | ||
703 | d->prg_cpu[idx]->begin.control = | ||
704 | cpu_to_le32(DMA_CTL_OUTPUT_MORE | | ||
705 | DMA_CTL_IMMEDIATE | 0x8); | ||
706 | } else { | ||
707 | d->prg_cpu[idx]->begin.control = | ||
708 | cpu_to_le32(DMA_CTL_OUTPUT_MORE | | ||
709 | DMA_CTL_IMMEDIATE | 0x10); | ||
710 | } | ||
711 | d->prg_cpu[idx]->end.control = | ||
712 | cpu_to_le32(DMA_CTL_OUTPUT_LAST | | ||
713 | DMA_CTL_IRQ | | ||
714 | DMA_CTL_BRANCH | | ||
715 | packet->data_size); | ||
716 | /* | ||
717 | * Check that the packet data buffer | ||
718 | * does not cross a page boundary. | ||
719 | * | ||
720 | * XXX Fix this some day. eth1394 seems to trigger | ||
721 | * it, but ignoring it doesn't seem to cause a | ||
722 | * problem. | ||
723 | */ | ||
724 | #if 0 | ||
725 | if (cross_bound((unsigned long)packet->data, | ||
726 | packet->data_size)>0) { | ||
727 | /* FIXME: do something about it */ | ||
728 | PRINT(KERN_ERR, | ||
729 | "%s: packet data addr: %p size %Zd bytes " | ||
730 | "cross page boundary", __FUNCTION__, | ||
731 | packet->data, packet->data_size); | ||
732 | } | ||
733 | #endif | ||
734 | d->prg_cpu[idx]->end.address = cpu_to_le32( | ||
735 | pci_map_single(ohci->dev, packet->data, | ||
736 | packet->data_size, | ||
737 | PCI_DMA_TODEVICE)); | ||
738 | OHCI_DMA_ALLOC("single, block transmit packet"); | ||
739 | |||
740 | d->prg_cpu[idx]->end.branchAddress = 0; | ||
741 | d->prg_cpu[idx]->end.status = 0; | ||
742 | if (d->branchAddrPtr) | ||
743 | *(d->branchAddrPtr) = | ||
744 | cpu_to_le32(d->prg_bus[idx] | 0x3); | ||
745 | d->branchAddrPtr = | ||
746 | &(d->prg_cpu[idx]->end.branchAddress); | ||
747 | } else { /* quadlet transmit */ | ||
748 | if (packet->type == hpsb_raw) | ||
749 | d->prg_cpu[idx]->begin.control = | ||
750 | cpu_to_le32(DMA_CTL_OUTPUT_LAST | | ||
751 | DMA_CTL_IMMEDIATE | | ||
752 | DMA_CTL_IRQ | | ||
753 | DMA_CTL_BRANCH | | ||
754 | (packet->header_size + 4)); | ||
755 | else | ||
756 | d->prg_cpu[idx]->begin.control = | ||
757 | cpu_to_le32(DMA_CTL_OUTPUT_LAST | | ||
758 | DMA_CTL_IMMEDIATE | | ||
759 | DMA_CTL_IRQ | | ||
760 | DMA_CTL_BRANCH | | ||
761 | packet->header_size); | ||
762 | |||
763 | if (d->branchAddrPtr) | ||
764 | *(d->branchAddrPtr) = | ||
765 | cpu_to_le32(d->prg_bus[idx] | 0x2); | ||
766 | d->branchAddrPtr = | ||
767 | &(d->prg_cpu[idx]->begin.branchAddress); | ||
768 | } | ||
769 | |||
770 | } else { /* iso packet */ | ||
771 | d->prg_cpu[idx]->data[0] = packet->speed_code<<16 | | ||
772 | (packet->header[0] & 0xFFFF); | ||
773 | d->prg_cpu[idx]->data[1] = packet->header[0] & 0xFFFF0000; | ||
774 | packet_swab(d->prg_cpu[idx]->data, packet->tcode); | ||
775 | |||
776 | d->prg_cpu[idx]->begin.control = | ||
777 | cpu_to_le32(DMA_CTL_OUTPUT_MORE | | ||
778 | DMA_CTL_IMMEDIATE | 0x8); | ||
779 | d->prg_cpu[idx]->end.control = | ||
780 | cpu_to_le32(DMA_CTL_OUTPUT_LAST | | ||
781 | DMA_CTL_UPDATE | | ||
782 | DMA_CTL_IRQ | | ||
783 | DMA_CTL_BRANCH | | ||
784 | packet->data_size); | ||
785 | d->prg_cpu[idx]->end.address = cpu_to_le32( | ||
786 | pci_map_single(ohci->dev, packet->data, | ||
787 | packet->data_size, PCI_DMA_TODEVICE)); | ||
788 | OHCI_DMA_ALLOC("single, iso transmit packet"); | ||
789 | |||
790 | d->prg_cpu[idx]->end.branchAddress = 0; | ||
791 | d->prg_cpu[idx]->end.status = 0; | ||
792 | DBGMSG("Iso xmit context info: header[%08x %08x]\n" | ||
793 | " begin=%08x %08x %08x %08x\n" | ||
794 | " %08x %08x %08x %08x\n" | ||
795 | " end =%08x %08x %08x %08x", | ||
796 | d->prg_cpu[idx]->data[0], d->prg_cpu[idx]->data[1], | ||
797 | d->prg_cpu[idx]->begin.control, | ||
798 | d->prg_cpu[idx]->begin.address, | ||
799 | d->prg_cpu[idx]->begin.branchAddress, | ||
800 | d->prg_cpu[idx]->begin.status, | ||
801 | d->prg_cpu[idx]->data[0], | ||
802 | d->prg_cpu[idx]->data[1], | ||
803 | d->prg_cpu[idx]->data[2], | ||
804 | d->prg_cpu[idx]->data[3], | ||
805 | d->prg_cpu[idx]->end.control, | ||
806 | d->prg_cpu[idx]->end.address, | ||
807 | d->prg_cpu[idx]->end.branchAddress, | ||
808 | d->prg_cpu[idx]->end.status); | ||
809 | if (d->branchAddrPtr) | ||
810 | *(d->branchAddrPtr) = cpu_to_le32(d->prg_bus[idx] | 0x3); | ||
811 | d->branchAddrPtr = &(d->prg_cpu[idx]->end.branchAddress); | ||
812 | } | ||
813 | d->free_prgs--; | ||
814 | |||
815 | /* queue the packet in the appropriate context queue */ | ||
816 | list_add_tail(&packet->driver_list, &d->fifo_list); | ||
817 | d->prg_ind = (d->prg_ind + 1) % d->num_desc; | ||
818 | } | ||
819 | |||
820 | /* | ||
821 | * This function fills the FIFO with the (eventual) pending packets | ||
822 | * and runs or wakes up the DMA prg if necessary. | ||
823 | * | ||
824 | * The function MUST be called with the d->lock held. | ||
825 | */ | ||
826 | static void dma_trm_flush(struct ti_ohci *ohci, struct dma_trm_ctx *d) | ||
827 | { | ||
828 | struct hpsb_packet *packet, *ptmp; | ||
829 | int idx = d->prg_ind; | ||
830 | int z = 0; | ||
831 | |||
832 | /* insert the packets into the dma fifo */ | ||
833 | list_for_each_entry_safe(packet, ptmp, &d->pending_list, driver_list) { | ||
834 | if (!d->free_prgs) | ||
835 | break; | ||
836 | |||
837 | /* For the first packet only */ | ||
838 | if (!z) | ||
839 | z = (packet->data_size) ? 3 : 2; | ||
840 | |||
841 | /* Insert the packet */ | ||
842 | list_del_init(&packet->driver_list); | ||
843 | insert_packet(ohci, d, packet); | ||
844 | } | ||
845 | |||
846 | /* Nothing must have been done, either no free_prgs or no packets */ | ||
847 | if (z == 0) | ||
848 | return; | ||
849 | |||
850 | /* Is the context running ? (should be unless it is | ||
851 | the first packet to be sent in this context) */ | ||
852 | if (!(reg_read(ohci, d->ctrlSet) & 0x8000)) { | ||
853 | u32 nodeId = reg_read(ohci, OHCI1394_NodeID); | ||
854 | |||
855 | DBGMSG("Starting transmit DMA ctx=%d",d->ctx); | ||
856 | reg_write(ohci, d->cmdPtr, d->prg_bus[idx] | z); | ||
857 | |||
858 | /* Check that the node id is valid, and not 63 */ | ||
859 | if (!(nodeId & 0x80000000) || (nodeId & 0x3f) == 63) | ||
860 | PRINT(KERN_ERR, "Running dma failed because Node ID is not valid"); | ||
861 | else | ||
862 | reg_write(ohci, d->ctrlSet, 0x8000); | ||
863 | } else { | ||
864 | /* Wake up the dma context if necessary */ | ||
865 | if (!(reg_read(ohci, d->ctrlSet) & 0x400)) | ||
866 | DBGMSG("Waking transmit DMA ctx=%d",d->ctx); | ||
867 | |||
868 | /* do this always, to avoid race condition */ | ||
869 | reg_write(ohci, d->ctrlSet, 0x1000); | ||
870 | } | ||
871 | |||
872 | return; | ||
873 | } | ||
874 | |||
875 | /* Transmission of an async or iso packet */ | ||
876 | static int ohci_transmit(struct hpsb_host *host, struct hpsb_packet *packet) | ||
877 | { | ||
878 | struct ti_ohci *ohci = host->hostdata; | ||
879 | struct dma_trm_ctx *d; | ||
880 | unsigned long flags; | ||
881 | |||
882 | if (packet->data_size > ohci->max_packet_size) { | ||
883 | PRINT(KERN_ERR, | ||
884 | "Transmit packet size %Zd is too big", | ||
885 | packet->data_size); | ||
886 | return -EOVERFLOW; | ||
887 | } | ||
888 | |||
889 | /* Decide whether we have an iso, a request, or a response packet */ | ||
890 | if (packet->type == hpsb_raw) | ||
891 | d = &ohci->at_req_context; | ||
892 | else if ((packet->tcode == TCODE_ISO_DATA) && (packet->type == hpsb_iso)) { | ||
893 | /* The legacy IT DMA context is initialized on first | ||
894 | * use. However, the alloc cannot be run from | ||
895 | * interrupt context, so we bail out if that is the | ||
896 | * case. I don't see anyone sending ISO packets from | ||
897 | * interrupt context anyway... */ | ||
898 | |||
899 | if (ohci->it_legacy_context.ohci == NULL) { | ||
900 | if (in_interrupt()) { | ||
901 | PRINT(KERN_ERR, | ||
902 | "legacy IT context cannot be initialized during interrupt"); | ||
903 | return -EINVAL; | ||
904 | } | ||
905 | |||
906 | if (alloc_dma_trm_ctx(ohci, &ohci->it_legacy_context, | ||
907 | DMA_CTX_ISO, 0, IT_NUM_DESC, | ||
908 | OHCI1394_IsoXmitContextBase) < 0) { | ||
909 | PRINT(KERN_ERR, | ||
910 | "error initializing legacy IT context"); | ||
911 | return -ENOMEM; | ||
912 | } | ||
913 | |||
914 | initialize_dma_trm_ctx(&ohci->it_legacy_context); | ||
915 | } | ||
916 | |||
917 | d = &ohci->it_legacy_context; | ||
918 | } else if ((packet->tcode & 0x02) && (packet->tcode != TCODE_ISO_DATA)) | ||
919 | d = &ohci->at_resp_context; | ||
920 | else | ||
921 | d = &ohci->at_req_context; | ||
922 | |||
923 | spin_lock_irqsave(&d->lock,flags); | ||
924 | |||
925 | list_add_tail(&packet->driver_list, &d->pending_list); | ||
926 | |||
927 | dma_trm_flush(ohci, d); | ||
928 | |||
929 | spin_unlock_irqrestore(&d->lock,flags); | ||
930 | |||
931 | return 0; | ||
932 | } | ||
933 | |||
934 | static int ohci_devctl(struct hpsb_host *host, enum devctl_cmd cmd, int arg) | ||
935 | { | ||
936 | struct ti_ohci *ohci = host->hostdata; | ||
937 | int retval = 0; | ||
938 | unsigned long flags; | ||
939 | int phy_reg; | ||
940 | |||
941 | switch (cmd) { | ||
942 | case RESET_BUS: | ||
943 | switch (arg) { | ||
944 | case SHORT_RESET: | ||
945 | phy_reg = get_phy_reg(ohci, 5); | ||
946 | phy_reg |= 0x40; | ||
947 | set_phy_reg(ohci, 5, phy_reg); /* set ISBR */ | ||
948 | break; | ||
949 | case LONG_RESET: | ||
950 | phy_reg = get_phy_reg(ohci, 1); | ||
951 | phy_reg |= 0x40; | ||
952 | set_phy_reg(ohci, 1, phy_reg); /* set IBR */ | ||
953 | break; | ||
954 | case SHORT_RESET_NO_FORCE_ROOT: | ||
955 | phy_reg = get_phy_reg(ohci, 1); | ||
956 | if (phy_reg & 0x80) { | ||
957 | phy_reg &= ~0x80; | ||
958 | set_phy_reg(ohci, 1, phy_reg); /* clear RHB */ | ||
959 | } | ||
960 | |||
961 | phy_reg = get_phy_reg(ohci, 5); | ||
962 | phy_reg |= 0x40; | ||
963 | set_phy_reg(ohci, 5, phy_reg); /* set ISBR */ | ||
964 | break; | ||
965 | case LONG_RESET_NO_FORCE_ROOT: | ||
966 | phy_reg = get_phy_reg(ohci, 1); | ||
967 | phy_reg &= ~0x80; | ||
968 | phy_reg |= 0x40; | ||
969 | set_phy_reg(ohci, 1, phy_reg); /* clear RHB, set IBR */ | ||
970 | break; | ||
971 | case SHORT_RESET_FORCE_ROOT: | ||
972 | phy_reg = get_phy_reg(ohci, 1); | ||
973 | if (!(phy_reg & 0x80)) { | ||
974 | phy_reg |= 0x80; | ||
975 | set_phy_reg(ohci, 1, phy_reg); /* set RHB */ | ||
976 | } | ||
977 | |||
978 | phy_reg = get_phy_reg(ohci, 5); | ||
979 | phy_reg |= 0x40; | ||
980 | set_phy_reg(ohci, 5, phy_reg); /* set ISBR */ | ||
981 | break; | ||
982 | case LONG_RESET_FORCE_ROOT: | ||
983 | phy_reg = get_phy_reg(ohci, 1); | ||
984 | phy_reg |= 0xc0; | ||
985 | set_phy_reg(ohci, 1, phy_reg); /* set RHB and IBR */ | ||
986 | break; | ||
987 | default: | ||
988 | retval = -1; | ||
989 | } | ||
990 | break; | ||
991 | |||
992 | case GET_CYCLE_COUNTER: | ||
993 | retval = reg_read(ohci, OHCI1394_IsochronousCycleTimer); | ||
994 | break; | ||
995 | |||
996 | case SET_CYCLE_COUNTER: | ||
997 | reg_write(ohci, OHCI1394_IsochronousCycleTimer, arg); | ||
998 | break; | ||
999 | |||
1000 | case SET_BUS_ID: | ||
1001 | PRINT(KERN_ERR, "devctl command SET_BUS_ID err"); | ||
1002 | break; | ||
1003 | |||
1004 | case ACT_CYCLE_MASTER: | ||
1005 | if (arg) { | ||
1006 | /* check if we are root and other nodes are present */ | ||
1007 | u32 nodeId = reg_read(ohci, OHCI1394_NodeID); | ||
1008 | if ((nodeId & (1<<30)) && (nodeId & 0x3f)) { | ||
1009 | /* | ||
1010 | * enable cycleTimer, cycleMaster | ||
1011 | */ | ||
1012 | DBGMSG("Cycle master enabled"); | ||
1013 | reg_write(ohci, OHCI1394_LinkControlSet, | ||
1014 | OHCI1394_LinkControl_CycleTimerEnable | | ||
1015 | OHCI1394_LinkControl_CycleMaster); | ||
1016 | } | ||
1017 | } else { | ||
1018 | /* disable cycleTimer, cycleMaster, cycleSource */ | ||
1019 | reg_write(ohci, OHCI1394_LinkControlClear, | ||
1020 | OHCI1394_LinkControl_CycleTimerEnable | | ||
1021 | OHCI1394_LinkControl_CycleMaster | | ||
1022 | OHCI1394_LinkControl_CycleSource); | ||
1023 | } | ||
1024 | break; | ||
1025 | |||
1026 | case CANCEL_REQUESTS: | ||
1027 | DBGMSG("Cancel request received"); | ||
1028 | dma_trm_reset(&ohci->at_req_context); | ||
1029 | dma_trm_reset(&ohci->at_resp_context); | ||
1030 | break; | ||
1031 | |||
1032 | case ISO_LISTEN_CHANNEL: | ||
1033 | { | ||
1034 | u64 mask; | ||
1035 | |||
1036 | if (arg<0 || arg>63) { | ||
1037 | PRINT(KERN_ERR, | ||
1038 | "%s: IS0 listen channel %d is out of range", | ||
1039 | __FUNCTION__, arg); | ||
1040 | return -EFAULT; | ||
1041 | } | ||
1042 | |||
1043 | mask = (u64)0x1<<arg; | ||
1044 | |||
1045 | spin_lock_irqsave(&ohci->IR_channel_lock, flags); | ||
1046 | |||
1047 | if (ohci->ISO_channel_usage & mask) { | ||
1048 | PRINT(KERN_ERR, | ||
1049 | "%s: IS0 listen channel %d is already used", | ||
1050 | __FUNCTION__, arg); | ||
1051 | spin_unlock_irqrestore(&ohci->IR_channel_lock, flags); | ||
1052 | return -EFAULT; | ||
1053 | } | ||
1054 | |||
1055 | ohci->ISO_channel_usage |= mask; | ||
1056 | ohci->ir_legacy_channels |= mask; | ||
1057 | |||
1058 | if (arg>31) | ||
1059 | reg_write(ohci, OHCI1394_IRMultiChanMaskHiSet, | ||
1060 | 1<<(arg-32)); | ||
1061 | else | ||
1062 | reg_write(ohci, OHCI1394_IRMultiChanMaskLoSet, | ||
1063 | 1<<arg); | ||
1064 | |||
1065 | spin_unlock_irqrestore(&ohci->IR_channel_lock, flags); | ||
1066 | DBGMSG("Listening enabled on channel %d", arg); | ||
1067 | break; | ||
1068 | } | ||
1069 | case ISO_UNLISTEN_CHANNEL: | ||
1070 | { | ||
1071 | u64 mask; | ||
1072 | |||
1073 | if (arg<0 || arg>63) { | ||
1074 | PRINT(KERN_ERR, | ||
1075 | "%s: IS0 unlisten channel %d is out of range", | ||
1076 | __FUNCTION__, arg); | ||
1077 | return -EFAULT; | ||
1078 | } | ||
1079 | |||
1080 | mask = (u64)0x1<<arg; | ||
1081 | |||
1082 | spin_lock_irqsave(&ohci->IR_channel_lock, flags); | ||
1083 | |||
1084 | if (!(ohci->ISO_channel_usage & mask)) { | ||
1085 | PRINT(KERN_ERR, | ||
1086 | "%s: IS0 unlisten channel %d is not used", | ||
1087 | __FUNCTION__, arg); | ||
1088 | spin_unlock_irqrestore(&ohci->IR_channel_lock, flags); | ||
1089 | return -EFAULT; | ||
1090 | } | ||
1091 | |||
1092 | ohci->ISO_channel_usage &= ~mask; | ||
1093 | ohci->ir_legacy_channels &= ~mask; | ||
1094 | |||
1095 | if (arg>31) | ||
1096 | reg_write(ohci, OHCI1394_IRMultiChanMaskHiClear, | ||
1097 | 1<<(arg-32)); | ||
1098 | else | ||
1099 | reg_write(ohci, OHCI1394_IRMultiChanMaskLoClear, | ||
1100 | 1<<arg); | ||
1101 | |||
1102 | spin_unlock_irqrestore(&ohci->IR_channel_lock, flags); | ||
1103 | DBGMSG("Listening disabled on channel %d", arg); | ||
1104 | break; | ||
1105 | } | ||
1106 | default: | ||
1107 | PRINT_G(KERN_ERR, "ohci_devctl cmd %d not implemented yet", | ||
1108 | cmd); | ||
1109 | break; | ||
1110 | } | ||
1111 | return retval; | ||
1112 | } | ||
1113 | |||
1114 | /*********************************** | ||
1115 | * rawiso ISO reception * | ||
1116 | ***********************************/ | ||
1117 | |||
1118 | /* | ||
1119 | We use either buffer-fill or packet-per-buffer DMA mode. The DMA | ||
1120 | buffer is split into "blocks" (regions described by one DMA | ||
1121 | descriptor). Each block must be one page or less in size, and | ||
1122 | must not cross a page boundary. | ||
1123 | |||
1124 | There is one little wrinkle with buffer-fill mode: a packet that | ||
1125 | starts in the final block may wrap around into the first block. But | ||
1126 | the user API expects all packets to be contiguous. Our solution is | ||
1127 | to keep the very last page of the DMA buffer in reserve - if a | ||
1128 | packet spans the gap, we copy its tail into this page. | ||
1129 | */ | ||
1130 | |||
1131 | struct ohci_iso_recv { | ||
1132 | struct ti_ohci *ohci; | ||
1133 | |||
1134 | struct ohci1394_iso_tasklet task; | ||
1135 | int task_active; | ||
1136 | |||
1137 | enum { BUFFER_FILL_MODE = 0, | ||
1138 | PACKET_PER_BUFFER_MODE = 1 } dma_mode; | ||
1139 | |||
1140 | /* memory and PCI mapping for the DMA descriptors */ | ||
1141 | struct dma_prog_region prog; | ||
1142 | struct dma_cmd *block; /* = (struct dma_cmd*) prog.virt */ | ||
1143 | |||
1144 | /* how many DMA blocks fit in the buffer */ | ||
1145 | unsigned int nblocks; | ||
1146 | |||
1147 | /* stride of DMA blocks */ | ||
1148 | unsigned int buf_stride; | ||
1149 | |||
1150 | /* number of blocks to batch between interrupts */ | ||
1151 | int block_irq_interval; | ||
1152 | |||
1153 | /* block that DMA will finish next */ | ||
1154 | int block_dma; | ||
1155 | |||
1156 | /* (buffer-fill only) block that the reader will release next */ | ||
1157 | int block_reader; | ||
1158 | |||
1159 | /* (buffer-fill only) bytes of buffer the reader has released, | ||
1160 | less than one block */ | ||
1161 | int released_bytes; | ||
1162 | |||
1163 | /* (buffer-fill only) buffer offset at which the next packet will appear */ | ||
1164 | int dma_offset; | ||
1165 | |||
1166 | /* OHCI DMA context control registers */ | ||
1167 | u32 ContextControlSet; | ||
1168 | u32 ContextControlClear; | ||
1169 | u32 CommandPtr; | ||
1170 | u32 ContextMatch; | ||
1171 | }; | ||
1172 | |||
1173 | static void ohci_iso_recv_task(unsigned long data); | ||
1174 | static void ohci_iso_recv_stop(struct hpsb_iso *iso); | ||
1175 | static void ohci_iso_recv_shutdown(struct hpsb_iso *iso); | ||
1176 | static int ohci_iso_recv_start(struct hpsb_iso *iso, int cycle, int tag_mask, int sync); | ||
1177 | static void ohci_iso_recv_program(struct hpsb_iso *iso); | ||
1178 | |||
1179 | static int ohci_iso_recv_init(struct hpsb_iso *iso) | ||
1180 | { | ||
1181 | struct ti_ohci *ohci = iso->host->hostdata; | ||
1182 | struct ohci_iso_recv *recv; | ||
1183 | int ctx; | ||
1184 | int ret = -ENOMEM; | ||
1185 | |||
1186 | recv = kmalloc(sizeof(*recv), SLAB_KERNEL); | ||
1187 | if (!recv) | ||
1188 | return -ENOMEM; | ||
1189 | |||
1190 | iso->hostdata = recv; | ||
1191 | recv->ohci = ohci; | ||
1192 | recv->task_active = 0; | ||
1193 | dma_prog_region_init(&recv->prog); | ||
1194 | recv->block = NULL; | ||
1195 | |||
1196 | /* use buffer-fill mode, unless irq_interval is 1 | ||
1197 | (note: multichannel requires buffer-fill) */ | ||
1198 | |||
1199 | if (((iso->irq_interval == 1 && iso->dma_mode == HPSB_ISO_DMA_OLD_ABI) || | ||
1200 | iso->dma_mode == HPSB_ISO_DMA_PACKET_PER_BUFFER) && iso->channel != -1) { | ||
1201 | recv->dma_mode = PACKET_PER_BUFFER_MODE; | ||
1202 | } else { | ||
1203 | recv->dma_mode = BUFFER_FILL_MODE; | ||
1204 | } | ||
1205 | |||
1206 | /* set nblocks, buf_stride, block_irq_interval */ | ||
1207 | |||
1208 | if (recv->dma_mode == BUFFER_FILL_MODE) { | ||
1209 | recv->buf_stride = PAGE_SIZE; | ||
1210 | |||
1211 | /* one block per page of data in the DMA buffer, minus the final guard page */ | ||
1212 | recv->nblocks = iso->buf_size/PAGE_SIZE - 1; | ||
1213 | if (recv->nblocks < 3) { | ||
1214 | DBGMSG("ohci_iso_recv_init: DMA buffer too small"); | ||
1215 | goto err; | ||
1216 | } | ||
1217 | |||
1218 | /* iso->irq_interval is in packets - translate that to blocks */ | ||
1219 | if (iso->irq_interval == 1) | ||
1220 | recv->block_irq_interval = 1; | ||
1221 | else | ||
1222 | recv->block_irq_interval = iso->irq_interval * | ||
1223 | ((recv->nblocks+1)/iso->buf_packets); | ||
1224 | if (recv->block_irq_interval*4 > recv->nblocks) | ||
1225 | recv->block_irq_interval = recv->nblocks/4; | ||
1226 | if (recv->block_irq_interval < 1) | ||
1227 | recv->block_irq_interval = 1; | ||
1228 | |||
1229 | } else { | ||
1230 | int max_packet_size; | ||
1231 | |||
1232 | recv->nblocks = iso->buf_packets; | ||
1233 | recv->block_irq_interval = iso->irq_interval; | ||
1234 | if (recv->block_irq_interval * 4 > iso->buf_packets) | ||
1235 | recv->block_irq_interval = iso->buf_packets / 4; | ||
1236 | if (recv->block_irq_interval < 1) | ||
1237 | recv->block_irq_interval = 1; | ||
1238 | |||
1239 | /* choose a buffer stride */ | ||
1240 | /* must be a power of 2, and <= PAGE_SIZE */ | ||
1241 | |||
1242 | max_packet_size = iso->buf_size / iso->buf_packets; | ||
1243 | |||
1244 | for (recv->buf_stride = 8; recv->buf_stride < max_packet_size; | ||
1245 | recv->buf_stride *= 2); | ||
1246 | |||
1247 | if (recv->buf_stride*iso->buf_packets > iso->buf_size || | ||
1248 | recv->buf_stride > PAGE_SIZE) { | ||
1249 | /* this shouldn't happen, but anyway... */ | ||
1250 | DBGMSG("ohci_iso_recv_init: problem choosing a buffer stride"); | ||
1251 | goto err; | ||
1252 | } | ||
1253 | } | ||
1254 | |||
1255 | recv->block_reader = 0; | ||
1256 | recv->released_bytes = 0; | ||
1257 | recv->block_dma = 0; | ||
1258 | recv->dma_offset = 0; | ||
1259 | |||
1260 | /* size of DMA program = one descriptor per block */ | ||
1261 | if (dma_prog_region_alloc(&recv->prog, | ||
1262 | sizeof(struct dma_cmd) * recv->nblocks, | ||
1263 | recv->ohci->dev)) | ||
1264 | goto err; | ||
1265 | |||
1266 | recv->block = (struct dma_cmd*) recv->prog.kvirt; | ||
1267 | |||
1268 | ohci1394_init_iso_tasklet(&recv->task, | ||
1269 | iso->channel == -1 ? OHCI_ISO_MULTICHANNEL_RECEIVE : | ||
1270 | OHCI_ISO_RECEIVE, | ||
1271 | ohci_iso_recv_task, (unsigned long) iso); | ||
1272 | |||
1273 | if (ohci1394_register_iso_tasklet(recv->ohci, &recv->task) < 0) | ||
1274 | goto err; | ||
1275 | |||
1276 | recv->task_active = 1; | ||
1277 | |||
1278 | /* recv context registers are spaced 32 bytes apart */ | ||
1279 | ctx = recv->task.context; | ||
1280 | recv->ContextControlSet = OHCI1394_IsoRcvContextControlSet + 32 * ctx; | ||
1281 | recv->ContextControlClear = OHCI1394_IsoRcvContextControlClear + 32 * ctx; | ||
1282 | recv->CommandPtr = OHCI1394_IsoRcvCommandPtr + 32 * ctx; | ||
1283 | recv->ContextMatch = OHCI1394_IsoRcvContextMatch + 32 * ctx; | ||
1284 | |||
1285 | if (iso->channel == -1) { | ||
1286 | /* clear multi-channel selection mask */ | ||
1287 | reg_write(recv->ohci, OHCI1394_IRMultiChanMaskHiClear, 0xFFFFFFFF); | ||
1288 | reg_write(recv->ohci, OHCI1394_IRMultiChanMaskLoClear, 0xFFFFFFFF); | ||
1289 | } | ||
1290 | |||
1291 | /* write the DMA program */ | ||
1292 | ohci_iso_recv_program(iso); | ||
1293 | |||
1294 | DBGMSG("ohci_iso_recv_init: %s mode, DMA buffer is %lu pages" | ||
1295 | " (%u bytes), using %u blocks, buf_stride %u, block_irq_interval %d", | ||
1296 | recv->dma_mode == BUFFER_FILL_MODE ? | ||
1297 | "buffer-fill" : "packet-per-buffer", | ||
1298 | iso->buf_size/PAGE_SIZE, iso->buf_size, | ||
1299 | recv->nblocks, recv->buf_stride, recv->block_irq_interval); | ||
1300 | |||
1301 | return 0; | ||
1302 | |||
1303 | err: | ||
1304 | ohci_iso_recv_shutdown(iso); | ||
1305 | return ret; | ||
1306 | } | ||
1307 | |||
1308 | static void ohci_iso_recv_stop(struct hpsb_iso *iso) | ||
1309 | { | ||
1310 | struct ohci_iso_recv *recv = iso->hostdata; | ||
1311 | |||
1312 | /* disable interrupts */ | ||
1313 | reg_write(recv->ohci, OHCI1394_IsoRecvIntMaskClear, 1 << recv->task.context); | ||
1314 | |||
1315 | /* halt DMA */ | ||
1316 | ohci1394_stop_context(recv->ohci, recv->ContextControlClear, NULL); | ||
1317 | } | ||
1318 | |||
1319 | static void ohci_iso_recv_shutdown(struct hpsb_iso *iso) | ||
1320 | { | ||
1321 | struct ohci_iso_recv *recv = iso->hostdata; | ||
1322 | |||
1323 | if (recv->task_active) { | ||
1324 | ohci_iso_recv_stop(iso); | ||
1325 | ohci1394_unregister_iso_tasklet(recv->ohci, &recv->task); | ||
1326 | recv->task_active = 0; | ||
1327 | } | ||
1328 | |||
1329 | dma_prog_region_free(&recv->prog); | ||
1330 | kfree(recv); | ||
1331 | iso->hostdata = NULL; | ||
1332 | } | ||
1333 | |||
1334 | /* set up a "gapped" ring buffer DMA program */ | ||
1335 | static void ohci_iso_recv_program(struct hpsb_iso *iso) | ||
1336 | { | ||
1337 | struct ohci_iso_recv *recv = iso->hostdata; | ||
1338 | int blk; | ||
1339 | |||
1340 | /* address of 'branch' field in previous DMA descriptor */ | ||
1341 | u32 *prev_branch = NULL; | ||
1342 | |||
1343 | for (blk = 0; blk < recv->nblocks; blk++) { | ||
1344 | u32 control; | ||
1345 | |||
1346 | /* the DMA descriptor */ | ||
1347 | struct dma_cmd *cmd = &recv->block[blk]; | ||
1348 | |||
1349 | /* offset of the DMA descriptor relative to the DMA prog buffer */ | ||
1350 | unsigned long prog_offset = blk * sizeof(struct dma_cmd); | ||
1351 | |||
1352 | /* offset of this packet's data within the DMA buffer */ | ||
1353 | unsigned long buf_offset = blk * recv->buf_stride; | ||
1354 | |||
1355 | if (recv->dma_mode == BUFFER_FILL_MODE) { | ||
1356 | control = 2 << 28; /* INPUT_MORE */ | ||
1357 | } else { | ||
1358 | control = 3 << 28; /* INPUT_LAST */ | ||
1359 | } | ||
1360 | |||
1361 | control |= 8 << 24; /* s = 1, update xferStatus and resCount */ | ||
1362 | |||
1363 | /* interrupt on last block, and at intervals */ | ||
1364 | if (blk == recv->nblocks-1 || (blk % recv->block_irq_interval) == 0) { | ||
1365 | control |= 3 << 20; /* want interrupt */ | ||
1366 | } | ||
1367 | |||
1368 | control |= 3 << 18; /* enable branch to address */ | ||
1369 | control |= recv->buf_stride; | ||
1370 | |||
1371 | cmd->control = cpu_to_le32(control); | ||
1372 | cmd->address = cpu_to_le32(dma_region_offset_to_bus(&iso->data_buf, buf_offset)); | ||
1373 | cmd->branchAddress = 0; /* filled in on next loop */ | ||
1374 | cmd->status = cpu_to_le32(recv->buf_stride); | ||
1375 | |||
1376 | /* link the previous descriptor to this one */ | ||
1377 | if (prev_branch) { | ||
1378 | *prev_branch = cpu_to_le32(dma_prog_region_offset_to_bus(&recv->prog, prog_offset) | 1); | ||
1379 | } | ||
1380 | |||
1381 | prev_branch = &cmd->branchAddress; | ||
1382 | } | ||
1383 | |||
1384 | /* the final descriptor's branch address and Z should be left at 0 */ | ||
1385 | } | ||
1386 | |||
1387 | /* listen or unlisten to a specific channel (multi-channel mode only) */ | ||
1388 | static void ohci_iso_recv_change_channel(struct hpsb_iso *iso, unsigned char channel, int listen) | ||
1389 | { | ||
1390 | struct ohci_iso_recv *recv = iso->hostdata; | ||
1391 | int reg, i; | ||
1392 | |||
1393 | if (channel < 32) { | ||
1394 | reg = listen ? OHCI1394_IRMultiChanMaskLoSet : OHCI1394_IRMultiChanMaskLoClear; | ||
1395 | i = channel; | ||
1396 | } else { | ||
1397 | reg = listen ? OHCI1394_IRMultiChanMaskHiSet : OHCI1394_IRMultiChanMaskHiClear; | ||
1398 | i = channel - 32; | ||
1399 | } | ||
1400 | |||
1401 | reg_write(recv->ohci, reg, (1 << i)); | ||
1402 | |||
1403 | /* issue a dummy read to force all PCI writes to be posted immediately */ | ||
1404 | mb(); | ||
1405 | reg_read(recv->ohci, OHCI1394_IsochronousCycleTimer); | ||
1406 | } | ||
1407 | |||
1408 | static void ohci_iso_recv_set_channel_mask(struct hpsb_iso *iso, u64 mask) | ||
1409 | { | ||
1410 | struct ohci_iso_recv *recv = iso->hostdata; | ||
1411 | int i; | ||
1412 | |||
1413 | for (i = 0; i < 64; i++) { | ||
1414 | if (mask & (1ULL << i)) { | ||
1415 | if (i < 32) | ||
1416 | reg_write(recv->ohci, OHCI1394_IRMultiChanMaskLoSet, (1 << i)); | ||
1417 | else | ||
1418 | reg_write(recv->ohci, OHCI1394_IRMultiChanMaskHiSet, (1 << (i-32))); | ||
1419 | } else { | ||
1420 | if (i < 32) | ||
1421 | reg_write(recv->ohci, OHCI1394_IRMultiChanMaskLoClear, (1 << i)); | ||
1422 | else | ||
1423 | reg_write(recv->ohci, OHCI1394_IRMultiChanMaskHiClear, (1 << (i-32))); | ||
1424 | } | ||
1425 | } | ||
1426 | |||
1427 | /* issue a dummy read to force all PCI writes to be posted immediately */ | ||
1428 | mb(); | ||
1429 | reg_read(recv->ohci, OHCI1394_IsochronousCycleTimer); | ||
1430 | } | ||
1431 | |||
1432 | static int ohci_iso_recv_start(struct hpsb_iso *iso, int cycle, int tag_mask, int sync) | ||
1433 | { | ||
1434 | struct ohci_iso_recv *recv = iso->hostdata; | ||
1435 | struct ti_ohci *ohci = recv->ohci; | ||
1436 | u32 command, contextMatch; | ||
1437 | |||
1438 | reg_write(recv->ohci, recv->ContextControlClear, 0xFFFFFFFF); | ||
1439 | wmb(); | ||
1440 | |||
1441 | /* always keep ISO headers */ | ||
1442 | command = (1 << 30); | ||
1443 | |||
1444 | if (recv->dma_mode == BUFFER_FILL_MODE) | ||
1445 | command |= (1 << 31); | ||
1446 | |||
1447 | reg_write(recv->ohci, recv->ContextControlSet, command); | ||
1448 | |||
1449 | /* match on specified tags */ | ||
1450 | contextMatch = tag_mask << 28; | ||
1451 | |||
1452 | if (iso->channel == -1) { | ||
1453 | /* enable multichannel reception */ | ||
1454 | reg_write(recv->ohci, recv->ContextControlSet, (1 << 28)); | ||
1455 | } else { | ||
1456 | /* listen on channel */ | ||
1457 | contextMatch |= iso->channel; | ||
1458 | } | ||
1459 | |||
1460 | if (cycle != -1) { | ||
1461 | u32 seconds; | ||
1462 | |||
1463 | /* enable cycleMatch */ | ||
1464 | reg_write(recv->ohci, recv->ContextControlSet, (1 << 29)); | ||
1465 | |||
1466 | /* set starting cycle */ | ||
1467 | cycle &= 0x1FFF; | ||
1468 | |||
1469 | /* 'cycle' is only mod 8000, but we also need two 'seconds' bits - | ||
1470 | just snarf them from the current time */ | ||
1471 | seconds = reg_read(recv->ohci, OHCI1394_IsochronousCycleTimer) >> 25; | ||
1472 | |||
1473 | /* advance one second to give some extra time for DMA to start */ | ||
1474 | seconds += 1; | ||
1475 | |||
1476 | cycle |= (seconds & 3) << 13; | ||
1477 | |||
1478 | contextMatch |= cycle << 12; | ||
1479 | } | ||
1480 | |||
1481 | if (sync != -1) { | ||
1482 | /* set sync flag on first DMA descriptor */ | ||
1483 | struct dma_cmd *cmd = &recv->block[recv->block_dma]; | ||
1484 | cmd->control |= cpu_to_le32(DMA_CTL_WAIT); | ||
1485 | |||
1486 | /* match sync field */ | ||
1487 | contextMatch |= (sync&0xf)<<8; | ||
1488 | } | ||
1489 | |||
1490 | reg_write(recv->ohci, recv->ContextMatch, contextMatch); | ||
1491 | |||
1492 | /* address of first descriptor block */ | ||
1493 | command = dma_prog_region_offset_to_bus(&recv->prog, | ||
1494 | recv->block_dma * sizeof(struct dma_cmd)); | ||
1495 | command |= 1; /* Z=1 */ | ||
1496 | |||
1497 | reg_write(recv->ohci, recv->CommandPtr, command); | ||
1498 | |||
1499 | /* enable interrupts */ | ||
1500 | reg_write(recv->ohci, OHCI1394_IsoRecvIntMaskSet, 1 << recv->task.context); | ||
1501 | |||
1502 | wmb(); | ||
1503 | |||
1504 | /* run */ | ||
1505 | reg_write(recv->ohci, recv->ContextControlSet, 0x8000); | ||
1506 | |||
1507 | /* issue a dummy read of the cycle timer register to force | ||
1508 | all PCI writes to be posted immediately */ | ||
1509 | mb(); | ||
1510 | reg_read(recv->ohci, OHCI1394_IsochronousCycleTimer); | ||
1511 | |||
1512 | /* check RUN */ | ||
1513 | if (!(reg_read(recv->ohci, recv->ContextControlSet) & 0x8000)) { | ||
1514 | PRINT(KERN_ERR, | ||
1515 | "Error starting IR DMA (ContextControl 0x%08x)\n", | ||
1516 | reg_read(recv->ohci, recv->ContextControlSet)); | ||
1517 | return -1; | ||
1518 | } | ||
1519 | |||
1520 | return 0; | ||
1521 | } | ||
1522 | |||
1523 | static void ohci_iso_recv_release_block(struct ohci_iso_recv *recv, int block) | ||
1524 | { | ||
1525 | /* re-use the DMA descriptor for the block */ | ||
1526 | /* by linking the previous descriptor to it */ | ||
1527 | |||
1528 | int next_i = block; | ||
1529 | int prev_i = (next_i == 0) ? (recv->nblocks - 1) : (next_i - 1); | ||
1530 | |||
1531 | struct dma_cmd *next = &recv->block[next_i]; | ||
1532 | struct dma_cmd *prev = &recv->block[prev_i]; | ||
1533 | |||
1534 | /* 'next' becomes the new end of the DMA chain, | ||
1535 | so disable branch and enable interrupt */ | ||
1536 | next->branchAddress = 0; | ||
1537 | next->control |= cpu_to_le32(3 << 20); | ||
1538 | next->status = cpu_to_le32(recv->buf_stride); | ||
1539 | |||
1540 | /* link prev to next */ | ||
1541 | prev->branchAddress = cpu_to_le32(dma_prog_region_offset_to_bus(&recv->prog, | ||
1542 | sizeof(struct dma_cmd) * next_i) | ||
1543 | | 1); /* Z=1 */ | ||
1544 | |||
1545 | /* disable interrupt on previous DMA descriptor, except at intervals */ | ||
1546 | if ((prev_i % recv->block_irq_interval) == 0) { | ||
1547 | prev->control |= cpu_to_le32(3 << 20); /* enable interrupt */ | ||
1548 | } else { | ||
1549 | prev->control &= cpu_to_le32(~(3<<20)); /* disable interrupt */ | ||
1550 | } | ||
1551 | wmb(); | ||
1552 | |||
1553 | /* wake up DMA in case it fell asleep */ | ||
1554 | reg_write(recv->ohci, recv->ContextControlSet, (1 << 12)); | ||
1555 | } | ||
1556 | |||
1557 | static void ohci_iso_recv_bufferfill_release(struct ohci_iso_recv *recv, | ||
1558 | struct hpsb_iso_packet_info *info) | ||
1559 | { | ||
1560 | int len; | ||
1561 | |||
1562 | /* release the memory where the packet was */ | ||
1563 | len = info->len; | ||
1564 | |||
1565 | /* add the wasted space for padding to 4 bytes */ | ||
1566 | if (len % 4) | ||
1567 | len += 4 - (len % 4); | ||
1568 | |||
1569 | /* add 8 bytes for the OHCI DMA data format overhead */ | ||
1570 | len += 8; | ||
1571 | |||
1572 | recv->released_bytes += len; | ||
1573 | |||
1574 | /* have we released enough memory for one block? */ | ||
1575 | while (recv->released_bytes > recv->buf_stride) { | ||
1576 | ohci_iso_recv_release_block(recv, recv->block_reader); | ||
1577 | recv->block_reader = (recv->block_reader + 1) % recv->nblocks; | ||
1578 | recv->released_bytes -= recv->buf_stride; | ||
1579 | } | ||
1580 | } | ||
1581 | |||
1582 | static inline void ohci_iso_recv_release(struct hpsb_iso *iso, struct hpsb_iso_packet_info *info) | ||
1583 | { | ||
1584 | struct ohci_iso_recv *recv = iso->hostdata; | ||
1585 | if (recv->dma_mode == BUFFER_FILL_MODE) { | ||
1586 | ohci_iso_recv_bufferfill_release(recv, info); | ||
1587 | } else { | ||
1588 | ohci_iso_recv_release_block(recv, info - iso->infos); | ||
1589 | } | ||
1590 | } | ||
1591 | |||
1592 | /* parse all packets from blocks that have been fully received */ | ||
1593 | static void ohci_iso_recv_bufferfill_parse(struct hpsb_iso *iso, struct ohci_iso_recv *recv) | ||
1594 | { | ||
1595 | int wake = 0; | ||
1596 | int runaway = 0; | ||
1597 | struct ti_ohci *ohci = recv->ohci; | ||
1598 | |||
1599 | while (1) { | ||
1600 | /* we expect the next parsable packet to begin at recv->dma_offset */ | ||
1601 | /* note: packet layout is as shown in section 10.6.1.1 of the OHCI spec */ | ||
1602 | |||
1603 | unsigned int offset; | ||
1604 | unsigned short len, cycle; | ||
1605 | unsigned char channel, tag, sy; | ||
1606 | |||
1607 | unsigned char *p = iso->data_buf.kvirt; | ||
1608 | |||
1609 | unsigned int this_block = recv->dma_offset/recv->buf_stride; | ||
1610 | |||
1611 | /* don't loop indefinitely */ | ||
1612 | if (runaway++ > 100000) { | ||
1613 | atomic_inc(&iso->overflows); | ||
1614 | PRINT(KERN_ERR, | ||
1615 | "IR DMA error - Runaway during buffer parsing!\n"); | ||
1616 | break; | ||
1617 | } | ||
1618 | |||
1619 | /* stop parsing once we arrive at block_dma (i.e. don't get ahead of DMA) */ | ||
1620 | if (this_block == recv->block_dma) | ||
1621 | break; | ||
1622 | |||
1623 | wake = 1; | ||
1624 | |||
1625 | /* parse data length, tag, channel, and sy */ | ||
1626 | |||
1627 | /* note: we keep our own local copies of 'len' and 'offset' | ||
1628 | so the user can't mess with them by poking in the mmap area */ | ||
1629 | |||
1630 | len = p[recv->dma_offset+2] | (p[recv->dma_offset+3] << 8); | ||
1631 | |||
1632 | if (len > 4096) { | ||
1633 | PRINT(KERN_ERR, | ||
1634 | "IR DMA error - bogus 'len' value %u\n", len); | ||
1635 | } | ||
1636 | |||
1637 | channel = p[recv->dma_offset+1] & 0x3F; | ||
1638 | tag = p[recv->dma_offset+1] >> 6; | ||
1639 | sy = p[recv->dma_offset+0] & 0xF; | ||
1640 | |||
1641 | /* advance to data payload */ | ||
1642 | recv->dma_offset += 4; | ||
1643 | |||
1644 | /* check for wrap-around */ | ||
1645 | if (recv->dma_offset >= recv->buf_stride*recv->nblocks) { | ||
1646 | recv->dma_offset -= recv->buf_stride*recv->nblocks; | ||
1647 | } | ||
1648 | |||
1649 | /* dma_offset now points to the first byte of the data payload */ | ||
1650 | offset = recv->dma_offset; | ||
1651 | |||
1652 | /* advance to xferStatus/timeStamp */ | ||
1653 | recv->dma_offset += len; | ||
1654 | |||
1655 | /* payload is padded to 4 bytes */ | ||
1656 | if (len % 4) { | ||
1657 | recv->dma_offset += 4 - (len%4); | ||
1658 | } | ||
1659 | |||
1660 | /* check for wrap-around */ | ||
1661 | if (recv->dma_offset >= recv->buf_stride*recv->nblocks) { | ||
1662 | /* uh oh, the packet data wraps from the last | ||
1663 | to the first DMA block - make the packet | ||
1664 | contiguous by copying its "tail" into the | ||
1665 | guard page */ | ||
1666 | |||
1667 | int guard_off = recv->buf_stride*recv->nblocks; | ||
1668 | int tail_len = len - (guard_off - offset); | ||
1669 | |||
1670 | if (tail_len > 0 && tail_len < recv->buf_stride) { | ||
1671 | memcpy(iso->data_buf.kvirt + guard_off, | ||
1672 | iso->data_buf.kvirt, | ||
1673 | tail_len); | ||
1674 | } | ||
1675 | |||
1676 | recv->dma_offset -= recv->buf_stride*recv->nblocks; | ||
1677 | } | ||
1678 | |||
1679 | /* parse timestamp */ | ||
1680 | cycle = p[recv->dma_offset+0] | (p[recv->dma_offset+1]<<8); | ||
1681 | cycle &= 0x1FFF; | ||
1682 | |||
1683 | /* advance to next packet */ | ||
1684 | recv->dma_offset += 4; | ||
1685 | |||
1686 | /* check for wrap-around */ | ||
1687 | if (recv->dma_offset >= recv->buf_stride*recv->nblocks) { | ||
1688 | recv->dma_offset -= recv->buf_stride*recv->nblocks; | ||
1689 | } | ||
1690 | |||
1691 | hpsb_iso_packet_received(iso, offset, len, cycle, channel, tag, sy); | ||
1692 | } | ||
1693 | |||
1694 | if (wake) | ||
1695 | hpsb_iso_wake(iso); | ||
1696 | } | ||
1697 | |||
1698 | static void ohci_iso_recv_bufferfill_task(struct hpsb_iso *iso, struct ohci_iso_recv *recv) | ||
1699 | { | ||
1700 | int loop; | ||
1701 | struct ti_ohci *ohci = recv->ohci; | ||
1702 | |||
1703 | /* loop over all blocks */ | ||
1704 | for (loop = 0; loop < recv->nblocks; loop++) { | ||
1705 | |||
1706 | /* check block_dma to see if it's done */ | ||
1707 | struct dma_cmd *im = &recv->block[recv->block_dma]; | ||
1708 | |||
1709 | /* check the DMA descriptor for new writes to xferStatus */ | ||
1710 | u16 xferstatus = le32_to_cpu(im->status) >> 16; | ||
1711 | |||
1712 | /* rescount is the number of bytes *remaining to be written* in the block */ | ||
1713 | u16 rescount = le32_to_cpu(im->status) & 0xFFFF; | ||
1714 | |||
1715 | unsigned char event = xferstatus & 0x1F; | ||
1716 | |||
1717 | if (!event) { | ||
1718 | /* nothing has happened to this block yet */ | ||
1719 | break; | ||
1720 | } | ||
1721 | |||
1722 | if (event != 0x11) { | ||
1723 | atomic_inc(&iso->overflows); | ||
1724 | PRINT(KERN_ERR, | ||
1725 | "IR DMA error - OHCI error code 0x%02x\n", event); | ||
1726 | } | ||
1727 | |||
1728 | if (rescount != 0) { | ||
1729 | /* the card is still writing to this block; | ||
1730 | we can't touch it until it's done */ | ||
1731 | break; | ||
1732 | } | ||
1733 | |||
1734 | /* OK, the block is finished... */ | ||
1735 | |||
1736 | /* sync our view of the block */ | ||
1737 | dma_region_sync_for_cpu(&iso->data_buf, recv->block_dma*recv->buf_stride, recv->buf_stride); | ||
1738 | |||
1739 | /* reset the DMA descriptor */ | ||
1740 | im->status = recv->buf_stride; | ||
1741 | |||
1742 | /* advance block_dma */ | ||
1743 | recv->block_dma = (recv->block_dma + 1) % recv->nblocks; | ||
1744 | |||
1745 | if ((recv->block_dma+1) % recv->nblocks == recv->block_reader) { | ||
1746 | atomic_inc(&iso->overflows); | ||
1747 | DBGMSG("ISO reception overflow - " | ||
1748 | "ran out of DMA blocks"); | ||
1749 | } | ||
1750 | } | ||
1751 | |||
1752 | /* parse any packets that have arrived */ | ||
1753 | ohci_iso_recv_bufferfill_parse(iso, recv); | ||
1754 | } | ||
1755 | |||
1756 | static void ohci_iso_recv_packetperbuf_task(struct hpsb_iso *iso, struct ohci_iso_recv *recv) | ||
1757 | { | ||
1758 | int count; | ||
1759 | int wake = 0; | ||
1760 | struct ti_ohci *ohci = recv->ohci; | ||
1761 | |||
1762 | /* loop over the entire buffer */ | ||
1763 | for (count = 0; count < recv->nblocks; count++) { | ||
1764 | u32 packet_len = 0; | ||
1765 | |||
1766 | /* pointer to the DMA descriptor */ | ||
1767 | struct dma_cmd *il = ((struct dma_cmd*) recv->prog.kvirt) + iso->pkt_dma; | ||
1768 | |||
1769 | /* check the DMA descriptor for new writes to xferStatus */ | ||
1770 | u16 xferstatus = le32_to_cpu(il->status) >> 16; | ||
1771 | u16 rescount = le32_to_cpu(il->status) & 0xFFFF; | ||
1772 | |||
1773 | unsigned char event = xferstatus & 0x1F; | ||
1774 | |||
1775 | if (!event) { | ||
1776 | /* this packet hasn't come in yet; we are done for now */ | ||
1777 | goto out; | ||
1778 | } | ||
1779 | |||
1780 | if (event == 0x11) { | ||
1781 | /* packet received successfully! */ | ||
1782 | |||
1783 | /* rescount is the number of bytes *remaining* in the packet buffer, | ||
1784 | after the packet was written */ | ||
1785 | packet_len = recv->buf_stride - rescount; | ||
1786 | |||
1787 | } else if (event == 0x02) { | ||
1788 | PRINT(KERN_ERR, "IR DMA error - packet too long for buffer\n"); | ||
1789 | } else if (event) { | ||
1790 | PRINT(KERN_ERR, "IR DMA error - OHCI error code 0x%02x\n", event); | ||
1791 | } | ||
1792 | |||
1793 | /* sync our view of the buffer */ | ||
1794 | dma_region_sync_for_cpu(&iso->data_buf, iso->pkt_dma * recv->buf_stride, recv->buf_stride); | ||
1795 | |||
1796 | /* record the per-packet info */ | ||
1797 | { | ||
1798 | /* iso header is 8 bytes ahead of the data payload */ | ||
1799 | unsigned char *hdr; | ||
1800 | |||
1801 | unsigned int offset; | ||
1802 | unsigned short cycle; | ||
1803 | unsigned char channel, tag, sy; | ||
1804 | |||
1805 | offset = iso->pkt_dma * recv->buf_stride; | ||
1806 | hdr = iso->data_buf.kvirt + offset; | ||
1807 | |||
1808 | /* skip iso header */ | ||
1809 | offset += 8; | ||
1810 | packet_len -= 8; | ||
1811 | |||
1812 | cycle = (hdr[0] | (hdr[1] << 8)) & 0x1FFF; | ||
1813 | channel = hdr[5] & 0x3F; | ||
1814 | tag = hdr[5] >> 6; | ||
1815 | sy = hdr[4] & 0xF; | ||
1816 | |||
1817 | hpsb_iso_packet_received(iso, offset, packet_len, cycle, channel, tag, sy); | ||
1818 | } | ||
1819 | |||
1820 | /* reset the DMA descriptor */ | ||
1821 | il->status = recv->buf_stride; | ||
1822 | |||
1823 | wake = 1; | ||
1824 | recv->block_dma = iso->pkt_dma; | ||
1825 | } | ||
1826 | |||
1827 | out: | ||
1828 | if (wake) | ||
1829 | hpsb_iso_wake(iso); | ||
1830 | } | ||
1831 | |||
1832 | static void ohci_iso_recv_task(unsigned long data) | ||
1833 | { | ||
1834 | struct hpsb_iso *iso = (struct hpsb_iso*) data; | ||
1835 | struct ohci_iso_recv *recv = iso->hostdata; | ||
1836 | |||
1837 | if (recv->dma_mode == BUFFER_FILL_MODE) | ||
1838 | ohci_iso_recv_bufferfill_task(iso, recv); | ||
1839 | else | ||
1840 | ohci_iso_recv_packetperbuf_task(iso, recv); | ||
1841 | } | ||
1842 | |||
1843 | /*********************************** | ||
1844 | * rawiso ISO transmission * | ||
1845 | ***********************************/ | ||
1846 | |||
1847 | struct ohci_iso_xmit { | ||
1848 | struct ti_ohci *ohci; | ||
1849 | struct dma_prog_region prog; | ||
1850 | struct ohci1394_iso_tasklet task; | ||
1851 | int task_active; | ||
1852 | |||
1853 | u32 ContextControlSet; | ||
1854 | u32 ContextControlClear; | ||
1855 | u32 CommandPtr; | ||
1856 | }; | ||
1857 | |||
1858 | /* transmission DMA program: | ||
1859 | one OUTPUT_MORE_IMMEDIATE for the IT header | ||
1860 | one OUTPUT_LAST for the buffer data */ | ||
1861 | |||
1862 | struct iso_xmit_cmd { | ||
1863 | struct dma_cmd output_more_immediate; | ||
1864 | u8 iso_hdr[8]; | ||
1865 | u32 unused[2]; | ||
1866 | struct dma_cmd output_last; | ||
1867 | }; | ||
1868 | |||
1869 | static int ohci_iso_xmit_init(struct hpsb_iso *iso); | ||
1870 | static int ohci_iso_xmit_start(struct hpsb_iso *iso, int cycle); | ||
1871 | static void ohci_iso_xmit_shutdown(struct hpsb_iso *iso); | ||
1872 | static void ohci_iso_xmit_task(unsigned long data); | ||
1873 | |||
1874 | static int ohci_iso_xmit_init(struct hpsb_iso *iso) | ||
1875 | { | ||
1876 | struct ohci_iso_xmit *xmit; | ||
1877 | unsigned int prog_size; | ||
1878 | int ctx; | ||
1879 | int ret = -ENOMEM; | ||
1880 | |||
1881 | xmit = kmalloc(sizeof(*xmit), SLAB_KERNEL); | ||
1882 | if (!xmit) | ||
1883 | return -ENOMEM; | ||
1884 | |||
1885 | iso->hostdata = xmit; | ||
1886 | xmit->ohci = iso->host->hostdata; | ||
1887 | xmit->task_active = 0; | ||
1888 | |||
1889 | dma_prog_region_init(&xmit->prog); | ||
1890 | |||
1891 | prog_size = sizeof(struct iso_xmit_cmd) * iso->buf_packets; | ||
1892 | |||
1893 | if (dma_prog_region_alloc(&xmit->prog, prog_size, xmit->ohci->dev)) | ||
1894 | goto err; | ||
1895 | |||
1896 | ohci1394_init_iso_tasklet(&xmit->task, OHCI_ISO_TRANSMIT, | ||
1897 | ohci_iso_xmit_task, (unsigned long) iso); | ||
1898 | |||
1899 | if (ohci1394_register_iso_tasklet(xmit->ohci, &xmit->task) < 0) | ||
1900 | goto err; | ||
1901 | |||
1902 | xmit->task_active = 1; | ||
1903 | |||
1904 | /* xmit context registers are spaced 16 bytes apart */ | ||
1905 | ctx = xmit->task.context; | ||
1906 | xmit->ContextControlSet = OHCI1394_IsoXmitContextControlSet + 16 * ctx; | ||
1907 | xmit->ContextControlClear = OHCI1394_IsoXmitContextControlClear + 16 * ctx; | ||
1908 | xmit->CommandPtr = OHCI1394_IsoXmitCommandPtr + 16 * ctx; | ||
1909 | |||
1910 | return 0; | ||
1911 | |||
1912 | err: | ||
1913 | ohci_iso_xmit_shutdown(iso); | ||
1914 | return ret; | ||
1915 | } | ||
1916 | |||
1917 | static void ohci_iso_xmit_stop(struct hpsb_iso *iso) | ||
1918 | { | ||
1919 | struct ohci_iso_xmit *xmit = iso->hostdata; | ||
1920 | struct ti_ohci *ohci = xmit->ohci; | ||
1921 | |||
1922 | /* disable interrupts */ | ||
1923 | reg_write(xmit->ohci, OHCI1394_IsoXmitIntMaskClear, 1 << xmit->task.context); | ||
1924 | |||
1925 | /* halt DMA */ | ||
1926 | if (ohci1394_stop_context(xmit->ohci, xmit->ContextControlClear, NULL)) { | ||
1927 | /* XXX the DMA context will lock up if you try to send too much data! */ | ||
1928 | PRINT(KERN_ERR, | ||
1929 | "you probably exceeded the OHCI card's bandwidth limit - " | ||
1930 | "reload the module and reduce xmit bandwidth"); | ||
1931 | } | ||
1932 | } | ||
1933 | |||
1934 | static void ohci_iso_xmit_shutdown(struct hpsb_iso *iso) | ||
1935 | { | ||
1936 | struct ohci_iso_xmit *xmit = iso->hostdata; | ||
1937 | |||
1938 | if (xmit->task_active) { | ||
1939 | ohci_iso_xmit_stop(iso); | ||
1940 | ohci1394_unregister_iso_tasklet(xmit->ohci, &xmit->task); | ||
1941 | xmit->task_active = 0; | ||
1942 | } | ||
1943 | |||
1944 | dma_prog_region_free(&xmit->prog); | ||
1945 | kfree(xmit); | ||
1946 | iso->hostdata = NULL; | ||
1947 | } | ||
1948 | |||
1949 | static void ohci_iso_xmit_task(unsigned long data) | ||
1950 | { | ||
1951 | struct hpsb_iso *iso = (struct hpsb_iso*) data; | ||
1952 | struct ohci_iso_xmit *xmit = iso->hostdata; | ||
1953 | struct ti_ohci *ohci = xmit->ohci; | ||
1954 | int wake = 0; | ||
1955 | int count; | ||
1956 | |||
1957 | /* check the whole buffer if necessary, starting at pkt_dma */ | ||
1958 | for (count = 0; count < iso->buf_packets; count++) { | ||
1959 | int cycle; | ||
1960 | |||
1961 | /* DMA descriptor */ | ||
1962 | struct iso_xmit_cmd *cmd = dma_region_i(&xmit->prog, struct iso_xmit_cmd, iso->pkt_dma); | ||
1963 | |||
1964 | /* check for new writes to xferStatus */ | ||
1965 | u16 xferstatus = le32_to_cpu(cmd->output_last.status) >> 16; | ||
1966 | u8 event = xferstatus & 0x1F; | ||
1967 | |||
1968 | if (!event) { | ||
1969 | /* packet hasn't been sent yet; we are done for now */ | ||
1970 | break; | ||
1971 | } | ||
1972 | |||
1973 | if (event != 0x11) | ||
1974 | PRINT(KERN_ERR, | ||
1975 | "IT DMA error - OHCI error code 0x%02x\n", event); | ||
1976 | |||
1977 | /* at least one packet went out, so wake up the writer */ | ||
1978 | wake = 1; | ||
1979 | |||
1980 | /* parse cycle */ | ||
1981 | cycle = le32_to_cpu(cmd->output_last.status) & 0x1FFF; | ||
1982 | |||
1983 | /* tell the subsystem the packet has gone out */ | ||
1984 | hpsb_iso_packet_sent(iso, cycle, event != 0x11); | ||
1985 | |||
1986 | /* reset the DMA descriptor for next time */ | ||
1987 | cmd->output_last.status = 0; | ||
1988 | } | ||
1989 | |||
1990 | if (wake) | ||
1991 | hpsb_iso_wake(iso); | ||
1992 | } | ||
1993 | |||
1994 | static int ohci_iso_xmit_queue(struct hpsb_iso *iso, struct hpsb_iso_packet_info *info) | ||
1995 | { | ||
1996 | struct ohci_iso_xmit *xmit = iso->hostdata; | ||
1997 | struct ti_ohci *ohci = xmit->ohci; | ||
1998 | |||
1999 | int next_i, prev_i; | ||
2000 | struct iso_xmit_cmd *next, *prev; | ||
2001 | |||
2002 | unsigned int offset; | ||
2003 | unsigned short len; | ||
2004 | unsigned char tag, sy; | ||
2005 | |||
2006 | /* check that the packet doesn't cross a page boundary | ||
2007 | (we could allow this if we added OUTPUT_MORE descriptor support) */ | ||
2008 | if (cross_bound(info->offset, info->len)) { | ||
2009 | PRINT(KERN_ERR, | ||
2010 | "rawiso xmit: packet %u crosses a page boundary", | ||
2011 | iso->first_packet); | ||
2012 | return -EINVAL; | ||
2013 | } | ||
2014 | |||
2015 | offset = info->offset; | ||
2016 | len = info->len; | ||
2017 | tag = info->tag; | ||
2018 | sy = info->sy; | ||
2019 | |||
2020 | /* sync up the card's view of the buffer */ | ||
2021 | dma_region_sync_for_device(&iso->data_buf, offset, len); | ||
2022 | |||
2023 | /* append first_packet to the DMA chain */ | ||
2024 | /* by linking the previous descriptor to it */ | ||
2025 | /* (next will become the new end of the DMA chain) */ | ||
2026 | |||
2027 | next_i = iso->first_packet; | ||
2028 | prev_i = (next_i == 0) ? (iso->buf_packets - 1) : (next_i - 1); | ||
2029 | |||
2030 | next = dma_region_i(&xmit->prog, struct iso_xmit_cmd, next_i); | ||
2031 | prev = dma_region_i(&xmit->prog, struct iso_xmit_cmd, prev_i); | ||
2032 | |||
2033 | /* set up the OUTPUT_MORE_IMMEDIATE descriptor */ | ||
2034 | memset(next, 0, sizeof(struct iso_xmit_cmd)); | ||
2035 | next->output_more_immediate.control = cpu_to_le32(0x02000008); | ||
2036 | |||
2037 | /* ISO packet header is embedded in the OUTPUT_MORE_IMMEDIATE */ | ||
2038 | |||
2039 | /* tcode = 0xA, and sy */ | ||
2040 | next->iso_hdr[0] = 0xA0 | (sy & 0xF); | ||
2041 | |||
2042 | /* tag and channel number */ | ||
2043 | next->iso_hdr[1] = (tag << 6) | (iso->channel & 0x3F); | ||
2044 | |||
2045 | /* transmission speed */ | ||
2046 | next->iso_hdr[2] = iso->speed & 0x7; | ||
2047 | |||
2048 | /* payload size */ | ||
2049 | next->iso_hdr[6] = len & 0xFF; | ||
2050 | next->iso_hdr[7] = len >> 8; | ||
2051 | |||
2052 | /* set up the OUTPUT_LAST */ | ||
2053 | next->output_last.control = cpu_to_le32(1 << 28); | ||
2054 | next->output_last.control |= cpu_to_le32(1 << 27); /* update timeStamp */ | ||
2055 | next->output_last.control |= cpu_to_le32(3 << 20); /* want interrupt */ | ||
2056 | next->output_last.control |= cpu_to_le32(3 << 18); /* enable branch */ | ||
2057 | next->output_last.control |= cpu_to_le32(len); | ||
2058 | |||
2059 | /* payload bus address */ | ||
2060 | next->output_last.address = cpu_to_le32(dma_region_offset_to_bus(&iso->data_buf, offset)); | ||
2061 | |||
2062 | /* leave branchAddress at zero for now */ | ||
2063 | |||
2064 | /* re-write the previous DMA descriptor to chain to this one */ | ||
2065 | |||
2066 | /* set prev branch address to point to next (Z=3) */ | ||
2067 | prev->output_last.branchAddress = cpu_to_le32( | ||
2068 | dma_prog_region_offset_to_bus(&xmit->prog, sizeof(struct iso_xmit_cmd) * next_i) | 3); | ||
2069 | |||
2070 | /* disable interrupt, unless required by the IRQ interval */ | ||
2071 | if (prev_i % iso->irq_interval) { | ||
2072 | prev->output_last.control &= cpu_to_le32(~(3 << 20)); /* no interrupt */ | ||
2073 | } else { | ||
2074 | prev->output_last.control |= cpu_to_le32(3 << 20); /* enable interrupt */ | ||
2075 | } | ||
2076 | |||
2077 | wmb(); | ||
2078 | |||
2079 | /* wake DMA in case it is sleeping */ | ||
2080 | reg_write(xmit->ohci, xmit->ContextControlSet, 1 << 12); | ||
2081 | |||
2082 | /* issue a dummy read of the cycle timer to force all PCI | ||
2083 | writes to be posted immediately */ | ||
2084 | mb(); | ||
2085 | reg_read(xmit->ohci, OHCI1394_IsochronousCycleTimer); | ||
2086 | |||
2087 | return 0; | ||
2088 | } | ||
2089 | |||
2090 | static int ohci_iso_xmit_start(struct hpsb_iso *iso, int cycle) | ||
2091 | { | ||
2092 | struct ohci_iso_xmit *xmit = iso->hostdata; | ||
2093 | struct ti_ohci *ohci = xmit->ohci; | ||
2094 | |||
2095 | /* clear out the control register */ | ||
2096 | reg_write(xmit->ohci, xmit->ContextControlClear, 0xFFFFFFFF); | ||
2097 | wmb(); | ||
2098 | |||
2099 | /* address and length of first descriptor block (Z=3) */ | ||
2100 | reg_write(xmit->ohci, xmit->CommandPtr, | ||
2101 | dma_prog_region_offset_to_bus(&xmit->prog, iso->pkt_dma * sizeof(struct iso_xmit_cmd)) | 3); | ||
2102 | |||
2103 | /* cycle match */ | ||
2104 | if (cycle != -1) { | ||
2105 | u32 start = cycle & 0x1FFF; | ||
2106 | |||
2107 | /* 'cycle' is only mod 8000, but we also need two 'seconds' bits - | ||
2108 | just snarf them from the current time */ | ||
2109 | u32 seconds = reg_read(xmit->ohci, OHCI1394_IsochronousCycleTimer) >> 25; | ||
2110 | |||
2111 | /* advance one second to give some extra time for DMA to start */ | ||
2112 | seconds += 1; | ||
2113 | |||
2114 | start |= (seconds & 3) << 13; | ||
2115 | |||
2116 | reg_write(xmit->ohci, xmit->ContextControlSet, 0x80000000 | (start << 16)); | ||
2117 | } | ||
2118 | |||
2119 | /* enable interrupts */ | ||
2120 | reg_write(xmit->ohci, OHCI1394_IsoXmitIntMaskSet, 1 << xmit->task.context); | ||
2121 | |||
2122 | /* run */ | ||
2123 | reg_write(xmit->ohci, xmit->ContextControlSet, 0x8000); | ||
2124 | mb(); | ||
2125 | |||
2126 | /* wait 100 usec to give the card time to go active */ | ||
2127 | udelay(100); | ||
2128 | |||
2129 | /* check the RUN bit */ | ||
2130 | if (!(reg_read(xmit->ohci, xmit->ContextControlSet) & 0x8000)) { | ||
2131 | PRINT(KERN_ERR, "Error starting IT DMA (ContextControl 0x%08x)\n", | ||
2132 | reg_read(xmit->ohci, xmit->ContextControlSet)); | ||
2133 | return -1; | ||
2134 | } | ||
2135 | |||
2136 | return 0; | ||
2137 | } | ||
2138 | |||
2139 | static int ohci_isoctl(struct hpsb_iso *iso, enum isoctl_cmd cmd, unsigned long arg) | ||
2140 | { | ||
2141 | |||
2142 | switch(cmd) { | ||
2143 | case XMIT_INIT: | ||
2144 | return ohci_iso_xmit_init(iso); | ||
2145 | case XMIT_START: | ||
2146 | return ohci_iso_xmit_start(iso, arg); | ||
2147 | case XMIT_STOP: | ||
2148 | ohci_iso_xmit_stop(iso); | ||
2149 | return 0; | ||
2150 | case XMIT_QUEUE: | ||
2151 | return ohci_iso_xmit_queue(iso, (struct hpsb_iso_packet_info*) arg); | ||
2152 | case XMIT_SHUTDOWN: | ||
2153 | ohci_iso_xmit_shutdown(iso); | ||
2154 | return 0; | ||
2155 | |||
2156 | case RECV_INIT: | ||
2157 | return ohci_iso_recv_init(iso); | ||
2158 | case RECV_START: { | ||
2159 | int *args = (int*) arg; | ||
2160 | return ohci_iso_recv_start(iso, args[0], args[1], args[2]); | ||
2161 | } | ||
2162 | case RECV_STOP: | ||
2163 | ohci_iso_recv_stop(iso); | ||
2164 | return 0; | ||
2165 | case RECV_RELEASE: | ||
2166 | ohci_iso_recv_release(iso, (struct hpsb_iso_packet_info*) arg); | ||
2167 | return 0; | ||
2168 | case RECV_FLUSH: | ||
2169 | ohci_iso_recv_task((unsigned long) iso); | ||
2170 | return 0; | ||
2171 | case RECV_SHUTDOWN: | ||
2172 | ohci_iso_recv_shutdown(iso); | ||
2173 | return 0; | ||
2174 | case RECV_LISTEN_CHANNEL: | ||
2175 | ohci_iso_recv_change_channel(iso, arg, 1); | ||
2176 | return 0; | ||
2177 | case RECV_UNLISTEN_CHANNEL: | ||
2178 | ohci_iso_recv_change_channel(iso, arg, 0); | ||
2179 | return 0; | ||
2180 | case RECV_SET_CHANNEL_MASK: | ||
2181 | ohci_iso_recv_set_channel_mask(iso, *((u64*) arg)); | ||
2182 | return 0; | ||
2183 | |||
2184 | default: | ||
2185 | PRINT_G(KERN_ERR, "ohci_isoctl cmd %d not implemented yet", | ||
2186 | cmd); | ||
2187 | break; | ||
2188 | } | ||
2189 | return -EINVAL; | ||
2190 | } | ||
2191 | |||
2192 | /*************************************** | ||
2193 | * IEEE-1394 functionality section END * | ||
2194 | ***************************************/ | ||
2195 | |||
2196 | |||
2197 | /******************************************************** | ||
2198 | * Global stuff (interrupt handler, init/shutdown code) * | ||
2199 | ********************************************************/ | ||
2200 | |||
2201 | static void dma_trm_reset(struct dma_trm_ctx *d) | ||
2202 | { | ||
2203 | unsigned long flags; | ||
2204 | LIST_HEAD(packet_list); | ||
2205 | struct ti_ohci *ohci = d->ohci; | ||
2206 | struct hpsb_packet *packet, *ptmp; | ||
2207 | |||
2208 | ohci1394_stop_context(ohci, d->ctrlClear, NULL); | ||
2209 | |||
2210 | /* Lock the context, reset it and release it. Move the packets | ||
2211 | * that were pending in the context to packet_list and free | ||
2212 | * them after releasing the lock. */ | ||
2213 | |||
2214 | spin_lock_irqsave(&d->lock, flags); | ||
2215 | |||
2216 | list_splice(&d->fifo_list, &packet_list); | ||
2217 | list_splice(&d->pending_list, &packet_list); | ||
2218 | INIT_LIST_HEAD(&d->fifo_list); | ||
2219 | INIT_LIST_HEAD(&d->pending_list); | ||
2220 | |||
2221 | d->branchAddrPtr = NULL; | ||
2222 | d->sent_ind = d->prg_ind; | ||
2223 | d->free_prgs = d->num_desc; | ||
2224 | |||
2225 | spin_unlock_irqrestore(&d->lock, flags); | ||
2226 | |||
2227 | if (list_empty(&packet_list)) | ||
2228 | return; | ||
2229 | |||
2230 | PRINT(KERN_INFO, "AT dma reset ctx=%d, aborting transmission", d->ctx); | ||
2231 | |||
2232 | /* Now process subsystem callbacks for the packets from this | ||
2233 | * context. */ | ||
2234 | list_for_each_entry_safe(packet, ptmp, &packet_list, driver_list) { | ||
2235 | list_del_init(&packet->driver_list); | ||
2236 | hpsb_packet_sent(ohci->host, packet, ACKX_ABORTED); | ||
2237 | } | ||
2238 | } | ||
2239 | |||
2240 | static void ohci_schedule_iso_tasklets(struct ti_ohci *ohci, | ||
2241 | quadlet_t rx_event, | ||
2242 | quadlet_t tx_event) | ||
2243 | { | ||
2244 | struct ohci1394_iso_tasklet *t; | ||
2245 | unsigned long mask; | ||
2246 | |||
2247 | spin_lock(&ohci->iso_tasklet_list_lock); | ||
2248 | |||
2249 | list_for_each_entry(t, &ohci->iso_tasklet_list, link) { | ||
2250 | mask = 1 << t->context; | ||
2251 | |||
2252 | if (t->type == OHCI_ISO_TRANSMIT && tx_event & mask) | ||
2253 | tasklet_schedule(&t->tasklet); | ||
2254 | else if (rx_event & mask) | ||
2255 | tasklet_schedule(&t->tasklet); | ||
2256 | } | ||
2257 | |||
2258 | spin_unlock(&ohci->iso_tasklet_list_lock); | ||
2259 | |||
2260 | } | ||
2261 | |||
2262 | static irqreturn_t ohci_irq_handler(int irq, void *dev_id, | ||
2263 | struct pt_regs *regs_are_unused) | ||
2264 | { | ||
2265 | quadlet_t event, node_id; | ||
2266 | struct ti_ohci *ohci = (struct ti_ohci *)dev_id; | ||
2267 | struct hpsb_host *host = ohci->host; | ||
2268 | int phyid = -1, isroot = 0; | ||
2269 | unsigned long flags; | ||
2270 | |||
2271 | /* Read and clear the interrupt event register. Don't clear | ||
2272 | * the busReset event, though. This is done when we get the | ||
2273 | * selfIDComplete interrupt. */ | ||
2274 | spin_lock_irqsave(&ohci->event_lock, flags); | ||
2275 | event = reg_read(ohci, OHCI1394_IntEventClear); | ||
2276 | reg_write(ohci, OHCI1394_IntEventClear, event & ~OHCI1394_busReset); | ||
2277 | spin_unlock_irqrestore(&ohci->event_lock, flags); | ||
2278 | |||
2279 | if (!event) | ||
2280 | return IRQ_NONE; | ||
2281 | |||
2282 | /* If event is ~(u32)0 cardbus card was ejected. In this case | ||
2283 | * we just return, and clean up in the ohci1394_pci_remove | ||
2284 | * function. */ | ||
2285 | if (event == ~(u32) 0) { | ||
2286 | DBGMSG("Device removed."); | ||
2287 | return IRQ_NONE; | ||
2288 | } | ||
2289 | |||
2290 | DBGMSG("IntEvent: %08x", event); | ||
2291 | |||
2292 | if (event & OHCI1394_unrecoverableError) { | ||
2293 | int ctx; | ||
2294 | PRINT(KERN_ERR, "Unrecoverable error!"); | ||
2295 | |||
2296 | if (reg_read(ohci, OHCI1394_AsReqTrContextControlSet) & 0x800) | ||
2297 | PRINT(KERN_ERR, "Async Req Tx Context died: " | ||
2298 | "ctrl[%08x] cmdptr[%08x]", | ||
2299 | reg_read(ohci, OHCI1394_AsReqTrContextControlSet), | ||
2300 | reg_read(ohci, OHCI1394_AsReqTrCommandPtr)); | ||
2301 | |||
2302 | if (reg_read(ohci, OHCI1394_AsRspTrContextControlSet) & 0x800) | ||
2303 | PRINT(KERN_ERR, "Async Rsp Tx Context died: " | ||
2304 | "ctrl[%08x] cmdptr[%08x]", | ||
2305 | reg_read(ohci, OHCI1394_AsRspTrContextControlSet), | ||
2306 | reg_read(ohci, OHCI1394_AsRspTrCommandPtr)); | ||
2307 | |||
2308 | if (reg_read(ohci, OHCI1394_AsReqRcvContextControlSet) & 0x800) | ||
2309 | PRINT(KERN_ERR, "Async Req Rcv Context died: " | ||
2310 | "ctrl[%08x] cmdptr[%08x]", | ||
2311 | reg_read(ohci, OHCI1394_AsReqRcvContextControlSet), | ||
2312 | reg_read(ohci, OHCI1394_AsReqRcvCommandPtr)); | ||
2313 | |||
2314 | if (reg_read(ohci, OHCI1394_AsRspRcvContextControlSet) & 0x800) | ||
2315 | PRINT(KERN_ERR, "Async Rsp Rcv Context died: " | ||
2316 | "ctrl[%08x] cmdptr[%08x]", | ||
2317 | reg_read(ohci, OHCI1394_AsRspRcvContextControlSet), | ||
2318 | reg_read(ohci, OHCI1394_AsRspRcvCommandPtr)); | ||
2319 | |||
2320 | for (ctx = 0; ctx < ohci->nb_iso_xmit_ctx; ctx++) { | ||
2321 | if (reg_read(ohci, OHCI1394_IsoXmitContextControlSet + (16 * ctx)) & 0x800) | ||
2322 | PRINT(KERN_ERR, "Iso Xmit %d Context died: " | ||
2323 | "ctrl[%08x] cmdptr[%08x]", ctx, | ||
2324 | reg_read(ohci, OHCI1394_IsoXmitContextControlSet + (16 * ctx)), | ||
2325 | reg_read(ohci, OHCI1394_IsoXmitCommandPtr + (16 * ctx))); | ||
2326 | } | ||
2327 | |||
2328 | for (ctx = 0; ctx < ohci->nb_iso_rcv_ctx; ctx++) { | ||
2329 | if (reg_read(ohci, OHCI1394_IsoRcvContextControlSet + (32 * ctx)) & 0x800) | ||
2330 | PRINT(KERN_ERR, "Iso Recv %d Context died: " | ||
2331 | "ctrl[%08x] cmdptr[%08x] match[%08x]", ctx, | ||
2332 | reg_read(ohci, OHCI1394_IsoRcvContextControlSet + (32 * ctx)), | ||
2333 | reg_read(ohci, OHCI1394_IsoRcvCommandPtr + (32 * ctx)), | ||
2334 | reg_read(ohci, OHCI1394_IsoRcvContextMatch + (32 * ctx))); | ||
2335 | } | ||
2336 | |||
2337 | event &= ~OHCI1394_unrecoverableError; | ||
2338 | } | ||
2339 | |||
2340 | if (event & OHCI1394_cycleInconsistent) { | ||
2341 | /* We subscribe to the cycleInconsistent event only to | ||
2342 | * clear the corresponding event bit... otherwise, | ||
2343 | * isochronous cycleMatch DMA won't work. */ | ||
2344 | DBGMSG("OHCI1394_cycleInconsistent"); | ||
2345 | event &= ~OHCI1394_cycleInconsistent; | ||
2346 | } | ||
2347 | |||
2348 | if (event & OHCI1394_busReset) { | ||
2349 | /* The busReset event bit can't be cleared during the | ||
2350 | * selfID phase, so we disable busReset interrupts, to | ||
2351 | * avoid burying the cpu in interrupt requests. */ | ||
2352 | spin_lock_irqsave(&ohci->event_lock, flags); | ||
2353 | reg_write(ohci, OHCI1394_IntMaskClear, OHCI1394_busReset); | ||
2354 | |||
2355 | if (ohci->check_busreset) { | ||
2356 | int loop_count = 0; | ||
2357 | |||
2358 | udelay(10); | ||
2359 | |||
2360 | while (reg_read(ohci, OHCI1394_IntEventSet) & OHCI1394_busReset) { | ||
2361 | reg_write(ohci, OHCI1394_IntEventClear, OHCI1394_busReset); | ||
2362 | |||
2363 | spin_unlock_irqrestore(&ohci->event_lock, flags); | ||
2364 | udelay(10); | ||
2365 | spin_lock_irqsave(&ohci->event_lock, flags); | ||
2366 | |||
2367 | /* The loop counter check is to prevent the driver | ||
2368 | * from remaining in this state forever. For the | ||
2369 | * initial bus reset, the loop continues for ever | ||
2370 | * and the system hangs, until some device is plugged-in | ||
2371 | * or out manually into a port! The forced reset seems | ||
2372 | * to solve this problem. This mainly effects nForce2. */ | ||
2373 | if (loop_count > 10000) { | ||
2374 | ohci_devctl(host, RESET_BUS, LONG_RESET); | ||
2375 | DBGMSG("Detected bus-reset loop. Forced a bus reset!"); | ||
2376 | loop_count = 0; | ||
2377 | } | ||
2378 | |||
2379 | loop_count++; | ||
2380 | } | ||
2381 | } | ||
2382 | spin_unlock_irqrestore(&ohci->event_lock, flags); | ||
2383 | if (!host->in_bus_reset) { | ||
2384 | DBGMSG("irq_handler: Bus reset requested"); | ||
2385 | |||
2386 | /* Subsystem call */ | ||
2387 | hpsb_bus_reset(ohci->host); | ||
2388 | } | ||
2389 | event &= ~OHCI1394_busReset; | ||
2390 | } | ||
2391 | |||
2392 | if (event & OHCI1394_reqTxComplete) { | ||
2393 | struct dma_trm_ctx *d = &ohci->at_req_context; | ||
2394 | DBGMSG("Got reqTxComplete interrupt " | ||
2395 | "status=0x%08X", reg_read(ohci, d->ctrlSet)); | ||
2396 | if (reg_read(ohci, d->ctrlSet) & 0x800) | ||
2397 | ohci1394_stop_context(ohci, d->ctrlClear, | ||
2398 | "reqTxComplete"); | ||
2399 | else | ||
2400 | dma_trm_tasklet((unsigned long)d); | ||
2401 | //tasklet_schedule(&d->task); | ||
2402 | event &= ~OHCI1394_reqTxComplete; | ||
2403 | } | ||
2404 | if (event & OHCI1394_respTxComplete) { | ||
2405 | struct dma_trm_ctx *d = &ohci->at_resp_context; | ||
2406 | DBGMSG("Got respTxComplete interrupt " | ||
2407 | "status=0x%08X", reg_read(ohci, d->ctrlSet)); | ||
2408 | if (reg_read(ohci, d->ctrlSet) & 0x800) | ||
2409 | ohci1394_stop_context(ohci, d->ctrlClear, | ||
2410 | "respTxComplete"); | ||
2411 | else | ||
2412 | tasklet_schedule(&d->task); | ||
2413 | event &= ~OHCI1394_respTxComplete; | ||
2414 | } | ||
2415 | if (event & OHCI1394_RQPkt) { | ||
2416 | struct dma_rcv_ctx *d = &ohci->ar_req_context; | ||
2417 | DBGMSG("Got RQPkt interrupt status=0x%08X", | ||
2418 | reg_read(ohci, d->ctrlSet)); | ||
2419 | if (reg_read(ohci, d->ctrlSet) & 0x800) | ||
2420 | ohci1394_stop_context(ohci, d->ctrlClear, "RQPkt"); | ||
2421 | else | ||
2422 | tasklet_schedule(&d->task); | ||
2423 | event &= ~OHCI1394_RQPkt; | ||
2424 | } | ||
2425 | if (event & OHCI1394_RSPkt) { | ||
2426 | struct dma_rcv_ctx *d = &ohci->ar_resp_context; | ||
2427 | DBGMSG("Got RSPkt interrupt status=0x%08X", | ||
2428 | reg_read(ohci, d->ctrlSet)); | ||
2429 | if (reg_read(ohci, d->ctrlSet) & 0x800) | ||
2430 | ohci1394_stop_context(ohci, d->ctrlClear, "RSPkt"); | ||
2431 | else | ||
2432 | tasklet_schedule(&d->task); | ||
2433 | event &= ~OHCI1394_RSPkt; | ||
2434 | } | ||
2435 | if (event & OHCI1394_isochRx) { | ||
2436 | quadlet_t rx_event; | ||
2437 | |||
2438 | rx_event = reg_read(ohci, OHCI1394_IsoRecvIntEventSet); | ||
2439 | reg_write(ohci, OHCI1394_IsoRecvIntEventClear, rx_event); | ||
2440 | ohci_schedule_iso_tasklets(ohci, rx_event, 0); | ||
2441 | event &= ~OHCI1394_isochRx; | ||
2442 | } | ||
2443 | if (event & OHCI1394_isochTx) { | ||
2444 | quadlet_t tx_event; | ||
2445 | |||
2446 | tx_event = reg_read(ohci, OHCI1394_IsoXmitIntEventSet); | ||
2447 | reg_write(ohci, OHCI1394_IsoXmitIntEventClear, tx_event); | ||
2448 | ohci_schedule_iso_tasklets(ohci, 0, tx_event); | ||
2449 | event &= ~OHCI1394_isochTx; | ||
2450 | } | ||
2451 | if (event & OHCI1394_selfIDComplete) { | ||
2452 | if (host->in_bus_reset) { | ||
2453 | node_id = reg_read(ohci, OHCI1394_NodeID); | ||
2454 | |||
2455 | if (!(node_id & 0x80000000)) { | ||
2456 | PRINT(KERN_ERR, | ||
2457 | "SelfID received, but NodeID invalid " | ||
2458 | "(probably new bus reset occurred): %08X", | ||
2459 | node_id); | ||
2460 | goto selfid_not_valid; | ||
2461 | } | ||
2462 | |||
2463 | phyid = node_id & 0x0000003f; | ||
2464 | isroot = (node_id & 0x40000000) != 0; | ||
2465 | |||
2466 | DBGMSG("SelfID interrupt received " | ||
2467 | "(phyid %d, %s)", phyid, | ||
2468 | (isroot ? "root" : "not root")); | ||
2469 | |||
2470 | handle_selfid(ohci, host, phyid, isroot); | ||
2471 | |||
2472 | /* Clear the bus reset event and re-enable the | ||
2473 | * busReset interrupt. */ | ||
2474 | spin_lock_irqsave(&ohci->event_lock, flags); | ||
2475 | reg_write(ohci, OHCI1394_IntEventClear, OHCI1394_busReset); | ||
2476 | reg_write(ohci, OHCI1394_IntMaskSet, OHCI1394_busReset); | ||
2477 | spin_unlock_irqrestore(&ohci->event_lock, flags); | ||
2478 | |||
2479 | /* Accept Physical requests from all nodes. */ | ||
2480 | reg_write(ohci,OHCI1394_AsReqFilterHiSet, 0xffffffff); | ||
2481 | reg_write(ohci,OHCI1394_AsReqFilterLoSet, 0xffffffff); | ||
2482 | |||
2483 | /* Turn on phys dma reception. | ||
2484 | * | ||
2485 | * TODO: Enable some sort of filtering management. | ||
2486 | */ | ||
2487 | if (phys_dma) { | ||
2488 | reg_write(ohci,OHCI1394_PhyReqFilterHiSet, 0xffffffff); | ||
2489 | reg_write(ohci,OHCI1394_PhyReqFilterLoSet, 0xffffffff); | ||
2490 | reg_write(ohci,OHCI1394_PhyUpperBound, 0xffff0000); | ||
2491 | } else { | ||
2492 | reg_write(ohci,OHCI1394_PhyReqFilterHiSet, 0x00000000); | ||
2493 | reg_write(ohci,OHCI1394_PhyReqFilterLoSet, 0x00000000); | ||
2494 | } | ||
2495 | |||
2496 | DBGMSG("PhyReqFilter=%08x%08x", | ||
2497 | reg_read(ohci,OHCI1394_PhyReqFilterHiSet), | ||
2498 | reg_read(ohci,OHCI1394_PhyReqFilterLoSet)); | ||
2499 | |||
2500 | hpsb_selfid_complete(host, phyid, isroot); | ||
2501 | } else | ||
2502 | PRINT(KERN_ERR, | ||
2503 | "SelfID received outside of bus reset sequence"); | ||
2504 | |||
2505 | selfid_not_valid: | ||
2506 | event &= ~OHCI1394_selfIDComplete; | ||
2507 | } | ||
2508 | |||
2509 | /* Make sure we handle everything, just in case we accidentally | ||
2510 | * enabled an interrupt that we didn't write a handler for. */ | ||
2511 | if (event) | ||
2512 | PRINT(KERN_ERR, "Unhandled interrupt(s) 0x%08x", | ||
2513 | event); | ||
2514 | |||
2515 | return IRQ_HANDLED; | ||
2516 | } | ||
2517 | |||
2518 | /* Put the buffer back into the dma context */ | ||
2519 | static void insert_dma_buffer(struct dma_rcv_ctx *d, int idx) | ||
2520 | { | ||
2521 | struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci); | ||
2522 | DBGMSG("Inserting dma buf ctx=%d idx=%d", d->ctx, idx); | ||
2523 | |||
2524 | d->prg_cpu[idx]->status = cpu_to_le32(d->buf_size); | ||
2525 | d->prg_cpu[idx]->branchAddress &= le32_to_cpu(0xfffffff0); | ||
2526 | idx = (idx + d->num_desc - 1 ) % d->num_desc; | ||
2527 | d->prg_cpu[idx]->branchAddress |= le32_to_cpu(0x00000001); | ||
2528 | |||
2529 | /* To avoid a race, ensure 1394 interface hardware sees the inserted | ||
2530 | * context program descriptors before it sees the wakeup bit set. */ | ||
2531 | wmb(); | ||
2532 | |||
2533 | /* wake up the dma context if necessary */ | ||
2534 | if (!(reg_read(ohci, d->ctrlSet) & 0x400)) { | ||
2535 | PRINT(KERN_INFO, | ||
2536 | "Waking dma ctx=%d ... processing is probably too slow", | ||
2537 | d->ctx); | ||
2538 | } | ||
2539 | |||
2540 | /* do this always, to avoid race condition */ | ||
2541 | reg_write(ohci, d->ctrlSet, 0x1000); | ||
2542 | } | ||
2543 | |||
2544 | #define cond_le32_to_cpu(data, noswap) \ | ||
2545 | (noswap ? data : le32_to_cpu(data)) | ||
2546 | |||
2547 | static const int TCODE_SIZE[16] = {20, 0, 16, -1, 16, 20, 20, 0, | ||
2548 | -1, 0, -1, 0, -1, -1, 16, -1}; | ||
2549 | |||
2550 | /* | ||
2551 | * Determine the length of a packet in the buffer | ||
2552 | * Optimization suggested by Pascal Drolet <pascal.drolet@informission.ca> | ||
2553 | */ | ||
2554 | static __inline__ int packet_length(struct dma_rcv_ctx *d, int idx, quadlet_t *buf_ptr, | ||
2555 | int offset, unsigned char tcode, int noswap) | ||
2556 | { | ||
2557 | int length = -1; | ||
2558 | |||
2559 | if (d->type == DMA_CTX_ASYNC_REQ || d->type == DMA_CTX_ASYNC_RESP) { | ||
2560 | length = TCODE_SIZE[tcode]; | ||
2561 | if (length == 0) { | ||
2562 | if (offset + 12 >= d->buf_size) { | ||
2563 | length = (cond_le32_to_cpu(d->buf_cpu[(idx + 1) % d->num_desc] | ||
2564 | [3 - ((d->buf_size - offset) >> 2)], noswap) >> 16); | ||
2565 | } else { | ||
2566 | length = (cond_le32_to_cpu(buf_ptr[3], noswap) >> 16); | ||
2567 | } | ||
2568 | length += 20; | ||
2569 | } | ||
2570 | } else if (d->type == DMA_CTX_ISO) { | ||
2571 | /* Assumption: buffer fill mode with header/trailer */ | ||
2572 | length = (cond_le32_to_cpu(buf_ptr[0], noswap) >> 16) + 8; | ||
2573 | } | ||
2574 | |||
2575 | if (length > 0 && length % 4) | ||
2576 | length += 4 - (length % 4); | ||
2577 | |||
2578 | return length; | ||
2579 | } | ||
2580 | |||
2581 | /* Tasklet that processes dma receive buffers */ | ||
2582 | static void dma_rcv_tasklet (unsigned long data) | ||
2583 | { | ||
2584 | struct dma_rcv_ctx *d = (struct dma_rcv_ctx*)data; | ||
2585 | struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci); | ||
2586 | unsigned int split_left, idx, offset, rescount; | ||
2587 | unsigned char tcode; | ||
2588 | int length, bytes_left, ack; | ||
2589 | unsigned long flags; | ||
2590 | quadlet_t *buf_ptr; | ||
2591 | char *split_ptr; | ||
2592 | char msg[256]; | ||
2593 | |||
2594 | spin_lock_irqsave(&d->lock, flags); | ||
2595 | |||
2596 | idx = d->buf_ind; | ||
2597 | offset = d->buf_offset; | ||
2598 | buf_ptr = d->buf_cpu[idx] + offset/4; | ||
2599 | |||
2600 | rescount = le32_to_cpu(d->prg_cpu[idx]->status) & 0xffff; | ||
2601 | bytes_left = d->buf_size - rescount - offset; | ||
2602 | |||
2603 | while (bytes_left > 0) { | ||
2604 | tcode = (cond_le32_to_cpu(buf_ptr[0], ohci->no_swap_incoming) >> 4) & 0xf; | ||
2605 | |||
2606 | /* packet_length() will return < 4 for an error */ | ||
2607 | length = packet_length(d, idx, buf_ptr, offset, tcode, ohci->no_swap_incoming); | ||
2608 | |||
2609 | if (length < 4) { /* something is wrong */ | ||
2610 | sprintf(msg,"Unexpected tcode 0x%x(0x%08x) in AR ctx=%d, length=%d", | ||
2611 | tcode, cond_le32_to_cpu(buf_ptr[0], ohci->no_swap_incoming), | ||
2612 | d->ctx, length); | ||
2613 | ohci1394_stop_context(ohci, d->ctrlClear, msg); | ||
2614 | spin_unlock_irqrestore(&d->lock, flags); | ||
2615 | return; | ||
2616 | } | ||
2617 | |||
2618 | /* The first case is where we have a packet that crosses | ||
2619 | * over more than one descriptor. The next case is where | ||
2620 | * it's all in the first descriptor. */ | ||
2621 | if ((offset + length) > d->buf_size) { | ||
2622 | DBGMSG("Split packet rcv'd"); | ||
2623 | if (length > d->split_buf_size) { | ||
2624 | ohci1394_stop_context(ohci, d->ctrlClear, | ||
2625 | "Split packet size exceeded"); | ||
2626 | d->buf_ind = idx; | ||
2627 | d->buf_offset = offset; | ||
2628 | spin_unlock_irqrestore(&d->lock, flags); | ||
2629 | return; | ||
2630 | } | ||
2631 | |||
2632 | if (le32_to_cpu(d->prg_cpu[(idx+1)%d->num_desc]->status) | ||
2633 | == d->buf_size) { | ||
2634 | /* Other part of packet not written yet. | ||
2635 | * this should never happen I think | ||
2636 | * anyway we'll get it on the next call. */ | ||
2637 | PRINT(KERN_INFO, | ||
2638 | "Got only half a packet!"); | ||
2639 | d->buf_ind = idx; | ||
2640 | d->buf_offset = offset; | ||
2641 | spin_unlock_irqrestore(&d->lock, flags); | ||
2642 | return; | ||
2643 | } | ||
2644 | |||
2645 | split_left = length; | ||
2646 | split_ptr = (char *)d->spb; | ||
2647 | memcpy(split_ptr,buf_ptr,d->buf_size-offset); | ||
2648 | split_left -= d->buf_size-offset; | ||
2649 | split_ptr += d->buf_size-offset; | ||
2650 | insert_dma_buffer(d, idx); | ||
2651 | idx = (idx+1) % d->num_desc; | ||
2652 | buf_ptr = d->buf_cpu[idx]; | ||
2653 | offset=0; | ||
2654 | |||
2655 | while (split_left >= d->buf_size) { | ||
2656 | memcpy(split_ptr,buf_ptr,d->buf_size); | ||
2657 | split_ptr += d->buf_size; | ||
2658 | split_left -= d->buf_size; | ||
2659 | insert_dma_buffer(d, idx); | ||
2660 | idx = (idx+1) % d->num_desc; | ||
2661 | buf_ptr = d->buf_cpu[idx]; | ||
2662 | } | ||
2663 | |||
2664 | if (split_left > 0) { | ||
2665 | memcpy(split_ptr, buf_ptr, split_left); | ||
2666 | offset = split_left; | ||
2667 | buf_ptr += offset/4; | ||
2668 | } | ||
2669 | } else { | ||
2670 | DBGMSG("Single packet rcv'd"); | ||
2671 | memcpy(d->spb, buf_ptr, length); | ||
2672 | offset += length; | ||
2673 | buf_ptr += length/4; | ||
2674 | if (offset==d->buf_size) { | ||
2675 | insert_dma_buffer(d, idx); | ||
2676 | idx = (idx+1) % d->num_desc; | ||
2677 | buf_ptr = d->buf_cpu[idx]; | ||
2678 | offset=0; | ||
2679 | } | ||
2680 | } | ||
2681 | |||
2682 | /* We get one phy packet to the async descriptor for each | ||
2683 | * bus reset. We always ignore it. */ | ||
2684 | if (tcode != OHCI1394_TCODE_PHY) { | ||
2685 | if (!ohci->no_swap_incoming) | ||
2686 | packet_swab(d->spb, tcode); | ||
2687 | DBGMSG("Packet received from node" | ||
2688 | " %d ack=0x%02X spd=%d tcode=0x%X" | ||
2689 | " length=%d ctx=%d tlabel=%d", | ||
2690 | (d->spb[1]>>16)&0x3f, | ||
2691 | (cond_le32_to_cpu(d->spb[length/4-1], ohci->no_swap_incoming)>>16)&0x1f, | ||
2692 | (cond_le32_to_cpu(d->spb[length/4-1], ohci->no_swap_incoming)>>21)&0x3, | ||
2693 | tcode, length, d->ctx, | ||
2694 | (cond_le32_to_cpu(d->spb[length/4-1], ohci->no_swap_incoming)>>10)&0x3f); | ||
2695 | |||
2696 | ack = (((cond_le32_to_cpu(d->spb[length/4-1], ohci->no_swap_incoming)>>16)&0x1f) | ||
2697 | == 0x11) ? 1 : 0; | ||
2698 | |||
2699 | hpsb_packet_received(ohci->host, d->spb, | ||
2700 | length-4, ack); | ||
2701 | } | ||
2702 | #ifdef OHCI1394_DEBUG | ||
2703 | else | ||
2704 | PRINT (KERN_DEBUG, "Got phy packet ctx=%d ... discarded", | ||
2705 | d->ctx); | ||
2706 | #endif | ||
2707 | |||
2708 | rescount = le32_to_cpu(d->prg_cpu[idx]->status) & 0xffff; | ||
2709 | |||
2710 | bytes_left = d->buf_size - rescount - offset; | ||
2711 | |||
2712 | } | ||
2713 | |||
2714 | d->buf_ind = idx; | ||
2715 | d->buf_offset = offset; | ||
2716 | |||
2717 | spin_unlock_irqrestore(&d->lock, flags); | ||
2718 | } | ||
2719 | |||
2720 | /* Bottom half that processes sent packets */ | ||
2721 | static void dma_trm_tasklet (unsigned long data) | ||
2722 | { | ||
2723 | struct dma_trm_ctx *d = (struct dma_trm_ctx*)data; | ||
2724 | struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci); | ||
2725 | struct hpsb_packet *packet, *ptmp; | ||
2726 | unsigned long flags; | ||
2727 | u32 status, ack; | ||
2728 | size_t datasize; | ||
2729 | |||
2730 | spin_lock_irqsave(&d->lock, flags); | ||
2731 | |||
2732 | list_for_each_entry_safe(packet, ptmp, &d->fifo_list, driver_list) { | ||
2733 | datasize = packet->data_size; | ||
2734 | if (datasize && packet->type != hpsb_raw) | ||
2735 | status = le32_to_cpu( | ||
2736 | d->prg_cpu[d->sent_ind]->end.status) >> 16; | ||
2737 | else | ||
2738 | status = le32_to_cpu( | ||
2739 | d->prg_cpu[d->sent_ind]->begin.status) >> 16; | ||
2740 | |||
2741 | if (status == 0) | ||
2742 | /* this packet hasn't been sent yet*/ | ||
2743 | break; | ||
2744 | |||
2745 | #ifdef OHCI1394_DEBUG | ||
2746 | if (datasize) | ||
2747 | if (((le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>4)&0xf) == 0xa) | ||
2748 | DBGMSG("Stream packet sent to channel %d tcode=0x%X " | ||
2749 | "ack=0x%X spd=%d dataLength=%d ctx=%d", | ||
2750 | (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>8)&0x3f, | ||
2751 | (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>4)&0xf, | ||
2752 | status&0x1f, (status>>5)&0x3, | ||
2753 | le32_to_cpu(d->prg_cpu[d->sent_ind]->data[1])>>16, | ||
2754 | d->ctx); | ||
2755 | else | ||
2756 | DBGMSG("Packet sent to node %d tcode=0x%X tLabel=" | ||
2757 | "0x%02X ack=0x%X spd=%d dataLength=%d ctx=%d", | ||
2758 | (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[1])>>16)&0x3f, | ||
2759 | (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>4)&0xf, | ||
2760 | (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>10)&0x3f, | ||
2761 | status&0x1f, (status>>5)&0x3, | ||
2762 | le32_to_cpu(d->prg_cpu[d->sent_ind]->data[3])>>16, | ||
2763 | d->ctx); | ||
2764 | else | ||
2765 | DBGMSG("Packet sent to node %d tcode=0x%X tLabel=" | ||
2766 | "0x%02X ack=0x%X spd=%d data=0x%08X ctx=%d", | ||
2767 | (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[1]) | ||
2768 | >>16)&0x3f, | ||
2769 | (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0]) | ||
2770 | >>4)&0xf, | ||
2771 | (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0]) | ||
2772 | >>10)&0x3f, | ||
2773 | status&0x1f, (status>>5)&0x3, | ||
2774 | le32_to_cpu(d->prg_cpu[d->sent_ind]->data[3]), | ||
2775 | d->ctx); | ||
2776 | #endif | ||
2777 | |||
2778 | if (status & 0x10) { | ||
2779 | ack = status & 0xf; | ||
2780 | } else { | ||
2781 | switch (status & 0x1f) { | ||
2782 | case EVT_NO_STATUS: /* that should never happen */ | ||
2783 | case EVT_RESERVED_A: /* that should never happen */ | ||
2784 | case EVT_LONG_PACKET: /* that should never happen */ | ||
2785 | PRINT(KERN_WARNING, "Received OHCI evt_* error 0x%x", status & 0x1f); | ||
2786 | ack = ACKX_SEND_ERROR; | ||
2787 | break; | ||
2788 | case EVT_MISSING_ACK: | ||
2789 | ack = ACKX_TIMEOUT; | ||
2790 | break; | ||
2791 | case EVT_UNDERRUN: | ||
2792 | ack = ACKX_SEND_ERROR; | ||
2793 | break; | ||
2794 | case EVT_OVERRUN: /* that should never happen */ | ||
2795 | PRINT(KERN_WARNING, "Received OHCI evt_* error 0x%x", status & 0x1f); | ||
2796 | ack = ACKX_SEND_ERROR; | ||
2797 | break; | ||
2798 | case EVT_DESCRIPTOR_READ: | ||
2799 | case EVT_DATA_READ: | ||
2800 | case EVT_DATA_WRITE: | ||
2801 | ack = ACKX_SEND_ERROR; | ||
2802 | break; | ||
2803 | case EVT_BUS_RESET: /* that should never happen */ | ||
2804 | PRINT(KERN_WARNING, "Received OHCI evt_* error 0x%x", status & 0x1f); | ||
2805 | ack = ACKX_SEND_ERROR; | ||
2806 | break; | ||
2807 | case EVT_TIMEOUT: | ||
2808 | ack = ACKX_TIMEOUT; | ||
2809 | break; | ||
2810 | case EVT_TCODE_ERR: | ||
2811 | ack = ACKX_SEND_ERROR; | ||
2812 | break; | ||
2813 | case EVT_RESERVED_B: /* that should never happen */ | ||
2814 | case EVT_RESERVED_C: /* that should never happen */ | ||
2815 | PRINT(KERN_WARNING, "Received OHCI evt_* error 0x%x", status & 0x1f); | ||
2816 | ack = ACKX_SEND_ERROR; | ||
2817 | break; | ||
2818 | case EVT_UNKNOWN: | ||
2819 | case EVT_FLUSHED: | ||
2820 | ack = ACKX_SEND_ERROR; | ||
2821 | break; | ||
2822 | default: | ||
2823 | PRINT(KERN_ERR, "Unhandled OHCI evt_* error 0x%x", status & 0x1f); | ||
2824 | ack = ACKX_SEND_ERROR; | ||
2825 | BUG(); | ||
2826 | } | ||
2827 | } | ||
2828 | |||
2829 | list_del_init(&packet->driver_list); | ||
2830 | hpsb_packet_sent(ohci->host, packet, ack); | ||
2831 | |||
2832 | if (datasize) { | ||
2833 | pci_unmap_single(ohci->dev, | ||
2834 | cpu_to_le32(d->prg_cpu[d->sent_ind]->end.address), | ||
2835 | datasize, PCI_DMA_TODEVICE); | ||
2836 | OHCI_DMA_FREE("single Xmit data packet"); | ||
2837 | } | ||
2838 | |||
2839 | d->sent_ind = (d->sent_ind+1)%d->num_desc; | ||
2840 | d->free_prgs++; | ||
2841 | } | ||
2842 | |||
2843 | dma_trm_flush(ohci, d); | ||
2844 | |||
2845 | spin_unlock_irqrestore(&d->lock, flags); | ||
2846 | } | ||
2847 | |||
2848 | static void stop_dma_rcv_ctx(struct dma_rcv_ctx *d) | ||
2849 | { | ||
2850 | if (d->ctrlClear) { | ||
2851 | ohci1394_stop_context(d->ohci, d->ctrlClear, NULL); | ||
2852 | |||
2853 | if (d->type == DMA_CTX_ISO) { | ||
2854 | /* disable interrupts */ | ||
2855 | reg_write(d->ohci, OHCI1394_IsoRecvIntMaskClear, 1 << d->ctx); | ||
2856 | ohci1394_unregister_iso_tasklet(d->ohci, &d->ohci->ir_legacy_tasklet); | ||
2857 | } else { | ||
2858 | tasklet_kill(&d->task); | ||
2859 | } | ||
2860 | } | ||
2861 | } | ||
2862 | |||
2863 | |||
2864 | static void free_dma_rcv_ctx(struct dma_rcv_ctx *d) | ||
2865 | { | ||
2866 | int i; | ||
2867 | struct ti_ohci *ohci = d->ohci; | ||
2868 | |||
2869 | if (ohci == NULL) | ||
2870 | return; | ||
2871 | |||
2872 | DBGMSG("Freeing dma_rcv_ctx %d", d->ctx); | ||
2873 | |||
2874 | if (d->buf_cpu) { | ||
2875 | for (i=0; i<d->num_desc; i++) | ||
2876 | if (d->buf_cpu[i] && d->buf_bus[i]) { | ||
2877 | pci_free_consistent( | ||
2878 | ohci->dev, d->buf_size, | ||
2879 | d->buf_cpu[i], d->buf_bus[i]); | ||
2880 | OHCI_DMA_FREE("consistent dma_rcv buf[%d]", i); | ||
2881 | } | ||
2882 | kfree(d->buf_cpu); | ||
2883 | kfree(d->buf_bus); | ||
2884 | } | ||
2885 | if (d->prg_cpu) { | ||
2886 | for (i=0; i<d->num_desc; i++) | ||
2887 | if (d->prg_cpu[i] && d->prg_bus[i]) { | ||
2888 | pci_pool_free(d->prg_pool, d->prg_cpu[i], d->prg_bus[i]); | ||
2889 | OHCI_DMA_FREE("consistent dma_rcv prg[%d]", i); | ||
2890 | } | ||
2891 | pci_pool_destroy(d->prg_pool); | ||
2892 | OHCI_DMA_FREE("dma_rcv prg pool"); | ||
2893 | kfree(d->prg_cpu); | ||
2894 | kfree(d->prg_bus); | ||
2895 | } | ||
2896 | if (d->spb) kfree(d->spb); | ||
2897 | |||
2898 | /* Mark this context as freed. */ | ||
2899 | d->ohci = NULL; | ||
2900 | } | ||
2901 | |||
2902 | static int | ||
2903 | alloc_dma_rcv_ctx(struct ti_ohci *ohci, struct dma_rcv_ctx *d, | ||
2904 | enum context_type type, int ctx, int num_desc, | ||
2905 | int buf_size, int split_buf_size, int context_base) | ||
2906 | { | ||
2907 | int i, len; | ||
2908 | static int num_allocs; | ||
2909 | static char pool_name[20]; | ||
2910 | |||
2911 | d->ohci = ohci; | ||
2912 | d->type = type; | ||
2913 | d->ctx = ctx; | ||
2914 | |||
2915 | d->num_desc = num_desc; | ||
2916 | d->buf_size = buf_size; | ||
2917 | d->split_buf_size = split_buf_size; | ||
2918 | |||
2919 | d->ctrlSet = 0; | ||
2920 | d->ctrlClear = 0; | ||
2921 | d->cmdPtr = 0; | ||
2922 | |||
2923 | d->buf_cpu = kmalloc(d->num_desc * sizeof(quadlet_t*), GFP_ATOMIC); | ||
2924 | d->buf_bus = kmalloc(d->num_desc * sizeof(dma_addr_t), GFP_ATOMIC); | ||
2925 | |||
2926 | if (d->buf_cpu == NULL || d->buf_bus == NULL) { | ||
2927 | PRINT(KERN_ERR, "Failed to allocate dma buffer"); | ||
2928 | free_dma_rcv_ctx(d); | ||
2929 | return -ENOMEM; | ||
2930 | } | ||
2931 | memset(d->buf_cpu, 0, d->num_desc * sizeof(quadlet_t*)); | ||
2932 | memset(d->buf_bus, 0, d->num_desc * sizeof(dma_addr_t)); | ||
2933 | |||
2934 | d->prg_cpu = kmalloc(d->num_desc * sizeof(struct dma_cmd*), | ||
2935 | GFP_ATOMIC); | ||
2936 | d->prg_bus = kmalloc(d->num_desc * sizeof(dma_addr_t), GFP_ATOMIC); | ||
2937 | |||
2938 | if (d->prg_cpu == NULL || d->prg_bus == NULL) { | ||
2939 | PRINT(KERN_ERR, "Failed to allocate dma prg"); | ||
2940 | free_dma_rcv_ctx(d); | ||
2941 | return -ENOMEM; | ||
2942 | } | ||
2943 | memset(d->prg_cpu, 0, d->num_desc * sizeof(struct dma_cmd*)); | ||
2944 | memset(d->prg_bus, 0, d->num_desc * sizeof(dma_addr_t)); | ||
2945 | |||
2946 | d->spb = kmalloc(d->split_buf_size, GFP_ATOMIC); | ||
2947 | |||
2948 | if (d->spb == NULL) { | ||
2949 | PRINT(KERN_ERR, "Failed to allocate split buffer"); | ||
2950 | free_dma_rcv_ctx(d); | ||
2951 | return -ENOMEM; | ||
2952 | } | ||
2953 | |||
2954 | len = sprintf(pool_name, "ohci1394_rcv_prg"); | ||
2955 | sprintf(pool_name+len, "%d", num_allocs); | ||
2956 | d->prg_pool = pci_pool_create(pool_name, ohci->dev, | ||
2957 | sizeof(struct dma_cmd), 4, 0); | ||
2958 | if(d->prg_pool == NULL) | ||
2959 | { | ||
2960 | PRINT(KERN_ERR, "pci_pool_create failed for %s", pool_name); | ||
2961 | free_dma_rcv_ctx(d); | ||
2962 | return -ENOMEM; | ||
2963 | } | ||
2964 | num_allocs++; | ||
2965 | |||
2966 | OHCI_DMA_ALLOC("dma_rcv prg pool"); | ||
2967 | |||
2968 | for (i=0; i<d->num_desc; i++) { | ||
2969 | d->buf_cpu[i] = pci_alloc_consistent(ohci->dev, | ||
2970 | d->buf_size, | ||
2971 | d->buf_bus+i); | ||
2972 | OHCI_DMA_ALLOC("consistent dma_rcv buf[%d]", i); | ||
2973 | |||
2974 | if (d->buf_cpu[i] != NULL) { | ||
2975 | memset(d->buf_cpu[i], 0, d->buf_size); | ||
2976 | } else { | ||
2977 | PRINT(KERN_ERR, | ||
2978 | "Failed to allocate dma buffer"); | ||
2979 | free_dma_rcv_ctx(d); | ||
2980 | return -ENOMEM; | ||
2981 | } | ||
2982 | |||
2983 | d->prg_cpu[i] = pci_pool_alloc(d->prg_pool, SLAB_KERNEL, d->prg_bus+i); | ||
2984 | OHCI_DMA_ALLOC("pool dma_rcv prg[%d]", i); | ||
2985 | |||
2986 | if (d->prg_cpu[i] != NULL) { | ||
2987 | memset(d->prg_cpu[i], 0, sizeof(struct dma_cmd)); | ||
2988 | } else { | ||
2989 | PRINT(KERN_ERR, | ||
2990 | "Failed to allocate dma prg"); | ||
2991 | free_dma_rcv_ctx(d); | ||
2992 | return -ENOMEM; | ||
2993 | } | ||
2994 | } | ||
2995 | |||
2996 | spin_lock_init(&d->lock); | ||
2997 | |||
2998 | if (type == DMA_CTX_ISO) { | ||
2999 | ohci1394_init_iso_tasklet(&ohci->ir_legacy_tasklet, | ||
3000 | OHCI_ISO_MULTICHANNEL_RECEIVE, | ||
3001 | dma_rcv_tasklet, (unsigned long) d); | ||
3002 | if (ohci1394_register_iso_tasklet(ohci, | ||
3003 | &ohci->ir_legacy_tasklet) < 0) { | ||
3004 | PRINT(KERN_ERR, "No IR DMA context available"); | ||
3005 | free_dma_rcv_ctx(d); | ||
3006 | return -EBUSY; | ||
3007 | } | ||
3008 | |||
3009 | /* the IR context can be assigned to any DMA context | ||
3010 | * by ohci1394_register_iso_tasklet */ | ||
3011 | d->ctx = ohci->ir_legacy_tasklet.context; | ||
3012 | d->ctrlSet = OHCI1394_IsoRcvContextControlSet + 32*d->ctx; | ||
3013 | d->ctrlClear = OHCI1394_IsoRcvContextControlClear + 32*d->ctx; | ||
3014 | d->cmdPtr = OHCI1394_IsoRcvCommandPtr + 32*d->ctx; | ||
3015 | d->ctxtMatch = OHCI1394_IsoRcvContextMatch + 32*d->ctx; | ||
3016 | } else { | ||
3017 | d->ctrlSet = context_base + OHCI1394_ContextControlSet; | ||
3018 | d->ctrlClear = context_base + OHCI1394_ContextControlClear; | ||
3019 | d->cmdPtr = context_base + OHCI1394_ContextCommandPtr; | ||
3020 | |||
3021 | tasklet_init (&d->task, dma_rcv_tasklet, (unsigned long) d); | ||
3022 | } | ||
3023 | |||
3024 | return 0; | ||
3025 | } | ||
3026 | |||
3027 | static void free_dma_trm_ctx(struct dma_trm_ctx *d) | ||
3028 | { | ||
3029 | int i; | ||
3030 | struct ti_ohci *ohci = d->ohci; | ||
3031 | |||
3032 | if (ohci == NULL) | ||
3033 | return; | ||
3034 | |||
3035 | DBGMSG("Freeing dma_trm_ctx %d", d->ctx); | ||
3036 | |||
3037 | if (d->prg_cpu) { | ||
3038 | for (i=0; i<d->num_desc; i++) | ||
3039 | if (d->prg_cpu[i] && d->prg_bus[i]) { | ||
3040 | pci_pool_free(d->prg_pool, d->prg_cpu[i], d->prg_bus[i]); | ||
3041 | OHCI_DMA_FREE("pool dma_trm prg[%d]", i); | ||
3042 | } | ||
3043 | pci_pool_destroy(d->prg_pool); | ||
3044 | OHCI_DMA_FREE("dma_trm prg pool"); | ||
3045 | kfree(d->prg_cpu); | ||
3046 | kfree(d->prg_bus); | ||
3047 | } | ||
3048 | |||
3049 | /* Mark this context as freed. */ | ||
3050 | d->ohci = NULL; | ||
3051 | } | ||
3052 | |||
3053 | static int | ||
3054 | alloc_dma_trm_ctx(struct ti_ohci *ohci, struct dma_trm_ctx *d, | ||
3055 | enum context_type type, int ctx, int num_desc, | ||
3056 | int context_base) | ||
3057 | { | ||
3058 | int i, len; | ||
3059 | static char pool_name[20]; | ||
3060 | static int num_allocs=0; | ||
3061 | |||
3062 | d->ohci = ohci; | ||
3063 | d->type = type; | ||
3064 | d->ctx = ctx; | ||
3065 | d->num_desc = num_desc; | ||
3066 | d->ctrlSet = 0; | ||
3067 | d->ctrlClear = 0; | ||
3068 | d->cmdPtr = 0; | ||
3069 | |||
3070 | d->prg_cpu = kmalloc(d->num_desc * sizeof(struct at_dma_prg*), | ||
3071 | GFP_KERNEL); | ||
3072 | d->prg_bus = kmalloc(d->num_desc * sizeof(dma_addr_t), GFP_KERNEL); | ||
3073 | |||
3074 | if (d->prg_cpu == NULL || d->prg_bus == NULL) { | ||
3075 | PRINT(KERN_ERR, "Failed to allocate at dma prg"); | ||
3076 | free_dma_trm_ctx(d); | ||
3077 | return -ENOMEM; | ||
3078 | } | ||
3079 | memset(d->prg_cpu, 0, d->num_desc * sizeof(struct at_dma_prg*)); | ||
3080 | memset(d->prg_bus, 0, d->num_desc * sizeof(dma_addr_t)); | ||
3081 | |||
3082 | len = sprintf(pool_name, "ohci1394_trm_prg"); | ||
3083 | sprintf(pool_name+len, "%d", num_allocs); | ||
3084 | d->prg_pool = pci_pool_create(pool_name, ohci->dev, | ||
3085 | sizeof(struct at_dma_prg), 4, 0); | ||
3086 | if (d->prg_pool == NULL) { | ||
3087 | PRINT(KERN_ERR, "pci_pool_create failed for %s", pool_name); | ||
3088 | free_dma_trm_ctx(d); | ||
3089 | return -ENOMEM; | ||
3090 | } | ||
3091 | num_allocs++; | ||
3092 | |||
3093 | OHCI_DMA_ALLOC("dma_rcv prg pool"); | ||
3094 | |||
3095 | for (i = 0; i < d->num_desc; i++) { | ||
3096 | d->prg_cpu[i] = pci_pool_alloc(d->prg_pool, SLAB_KERNEL, d->prg_bus+i); | ||
3097 | OHCI_DMA_ALLOC("pool dma_trm prg[%d]", i); | ||
3098 | |||
3099 | if (d->prg_cpu[i] != NULL) { | ||
3100 | memset(d->prg_cpu[i], 0, sizeof(struct at_dma_prg)); | ||
3101 | } else { | ||
3102 | PRINT(KERN_ERR, | ||
3103 | "Failed to allocate at dma prg"); | ||
3104 | free_dma_trm_ctx(d); | ||
3105 | return -ENOMEM; | ||
3106 | } | ||
3107 | } | ||
3108 | |||
3109 | spin_lock_init(&d->lock); | ||
3110 | |||
3111 | /* initialize tasklet */ | ||
3112 | if (type == DMA_CTX_ISO) { | ||
3113 | ohci1394_init_iso_tasklet(&ohci->it_legacy_tasklet, OHCI_ISO_TRANSMIT, | ||
3114 | dma_trm_tasklet, (unsigned long) d); | ||
3115 | if (ohci1394_register_iso_tasklet(ohci, | ||
3116 | &ohci->it_legacy_tasklet) < 0) { | ||
3117 | PRINT(KERN_ERR, "No IT DMA context available"); | ||
3118 | free_dma_trm_ctx(d); | ||
3119 | return -EBUSY; | ||
3120 | } | ||
3121 | |||
3122 | /* IT can be assigned to any context by register_iso_tasklet */ | ||
3123 | d->ctx = ohci->it_legacy_tasklet.context; | ||
3124 | d->ctrlSet = OHCI1394_IsoXmitContextControlSet + 16 * d->ctx; | ||
3125 | d->ctrlClear = OHCI1394_IsoXmitContextControlClear + 16 * d->ctx; | ||
3126 | d->cmdPtr = OHCI1394_IsoXmitCommandPtr + 16 * d->ctx; | ||
3127 | } else { | ||
3128 | d->ctrlSet = context_base + OHCI1394_ContextControlSet; | ||
3129 | d->ctrlClear = context_base + OHCI1394_ContextControlClear; | ||
3130 | d->cmdPtr = context_base + OHCI1394_ContextCommandPtr; | ||
3131 | tasklet_init (&d->task, dma_trm_tasklet, (unsigned long)d); | ||
3132 | } | ||
3133 | |||
3134 | return 0; | ||
3135 | } | ||
3136 | |||
3137 | static void ohci_set_hw_config_rom(struct hpsb_host *host, quadlet_t *config_rom) | ||
3138 | { | ||
3139 | struct ti_ohci *ohci = host->hostdata; | ||
3140 | |||
3141 | reg_write(ohci, OHCI1394_ConfigROMhdr, be32_to_cpu(config_rom[0])); | ||
3142 | reg_write(ohci, OHCI1394_BusOptions, be32_to_cpu(config_rom[2])); | ||
3143 | |||
3144 | memcpy(ohci->csr_config_rom_cpu, config_rom, OHCI_CONFIG_ROM_LEN); | ||
3145 | } | ||
3146 | |||
3147 | |||
3148 | static quadlet_t ohci_hw_csr_reg(struct hpsb_host *host, int reg, | ||
3149 | quadlet_t data, quadlet_t compare) | ||
3150 | { | ||
3151 | struct ti_ohci *ohci = host->hostdata; | ||
3152 | int i; | ||
3153 | |||
3154 | reg_write(ohci, OHCI1394_CSRData, data); | ||
3155 | reg_write(ohci, OHCI1394_CSRCompareData, compare); | ||
3156 | reg_write(ohci, OHCI1394_CSRControl, reg & 0x3); | ||
3157 | |||
3158 | for (i = 0; i < OHCI_LOOP_COUNT; i++) { | ||
3159 | if (reg_read(ohci, OHCI1394_CSRControl) & 0x80000000) | ||
3160 | break; | ||
3161 | |||
3162 | mdelay(1); | ||
3163 | } | ||
3164 | |||
3165 | return reg_read(ohci, OHCI1394_CSRData); | ||
3166 | } | ||
3167 | |||
3168 | static struct hpsb_host_driver ohci1394_driver = { | ||
3169 | .owner = THIS_MODULE, | ||
3170 | .name = OHCI1394_DRIVER_NAME, | ||
3171 | .set_hw_config_rom = ohci_set_hw_config_rom, | ||
3172 | .transmit_packet = ohci_transmit, | ||
3173 | .devctl = ohci_devctl, | ||
3174 | .isoctl = ohci_isoctl, | ||
3175 | .hw_csr_reg = ohci_hw_csr_reg, | ||
3176 | }; | ||
3177 | |||
3178 | |||
3179 | |||
3180 | /*********************************** | ||
3181 | * PCI Driver Interface functions * | ||
3182 | ***********************************/ | ||
3183 | |||
3184 | #define FAIL(err, fmt, args...) \ | ||
3185 | do { \ | ||
3186 | PRINT_G(KERN_ERR, fmt , ## args); \ | ||
3187 | ohci1394_pci_remove(dev); \ | ||
3188 | return err; \ | ||
3189 | } while (0) | ||
3190 | |||
3191 | static int __devinit ohci1394_pci_probe(struct pci_dev *dev, | ||
3192 | const struct pci_device_id *ent) | ||
3193 | { | ||
3194 | static int version_printed = 0; | ||
3195 | |||
3196 | struct hpsb_host *host; | ||
3197 | struct ti_ohci *ohci; /* shortcut to currently handled device */ | ||
3198 | unsigned long ohci_base; | ||
3199 | |||
3200 | if (version_printed++ == 0) | ||
3201 | PRINT_G(KERN_INFO, "%s", version); | ||
3202 | |||
3203 | if (pci_enable_device(dev)) | ||
3204 | FAIL(-ENXIO, "Failed to enable OHCI hardware"); | ||
3205 | pci_set_master(dev); | ||
3206 | |||
3207 | host = hpsb_alloc_host(&ohci1394_driver, sizeof(struct ti_ohci), &dev->dev); | ||
3208 | if (!host) FAIL(-ENOMEM, "Failed to allocate host structure"); | ||
3209 | |||
3210 | ohci = host->hostdata; | ||
3211 | ohci->dev = dev; | ||
3212 | ohci->host = host; | ||
3213 | ohci->init_state = OHCI_INIT_ALLOC_HOST; | ||
3214 | host->pdev = dev; | ||
3215 | pci_set_drvdata(dev, ohci); | ||
3216 | |||
3217 | /* We don't want hardware swapping */ | ||
3218 | pci_write_config_dword(dev, OHCI1394_PCI_HCI_Control, 0); | ||
3219 | |||
3220 | /* Some oddball Apple controllers do not order the selfid | ||
3221 | * properly, so we make up for it here. */ | ||
3222 | #ifndef __LITTLE_ENDIAN | ||
3223 | /* XXX: Need a better way to check this. I'm wondering if we can | ||
3224 | * read the values of the OHCI1394_PCI_HCI_Control and the | ||
3225 | * noByteSwapData registers to see if they were not cleared to | ||
3226 | * zero. Should this work? Obviously it's not defined what these | ||
3227 | * registers will read when they aren't supported. Bleh! */ | ||
3228 | if (dev->vendor == PCI_VENDOR_ID_APPLE && | ||
3229 | dev->device == PCI_DEVICE_ID_APPLE_UNI_N_FW) { | ||
3230 | ohci->no_swap_incoming = 1; | ||
3231 | ohci->selfid_swap = 0; | ||
3232 | } else | ||
3233 | ohci->selfid_swap = 1; | ||
3234 | #endif | ||
3235 | |||
3236 | |||
3237 | #ifndef PCI_DEVICE_ID_NVIDIA_NFORCE2_FW | ||
3238 | #define PCI_DEVICE_ID_NVIDIA_NFORCE2_FW 0x006e | ||
3239 | #endif | ||
3240 | |||
3241 | /* These chipsets require a bit of extra care when checking after | ||
3242 | * a busreset. */ | ||
3243 | if ((dev->vendor == PCI_VENDOR_ID_APPLE && | ||
3244 | dev->device == PCI_DEVICE_ID_APPLE_UNI_N_FW) || | ||
3245 | (dev->vendor == PCI_VENDOR_ID_NVIDIA && | ||
3246 | dev->device == PCI_DEVICE_ID_NVIDIA_NFORCE2_FW)) | ||
3247 | ohci->check_busreset = 1; | ||
3248 | |||
3249 | /* We hardwire the MMIO length, since some CardBus adaptors | ||
3250 | * fail to report the right length. Anyway, the ohci spec | ||
3251 | * clearly says it's 2kb, so this shouldn't be a problem. */ | ||
3252 | ohci_base = pci_resource_start(dev, 0); | ||
3253 | if (pci_resource_len(dev, 0) != OHCI1394_REGISTER_SIZE) | ||
3254 | PRINT(KERN_WARNING, "Unexpected PCI resource length of %lx!", | ||
3255 | pci_resource_len(dev, 0)); | ||
3256 | |||
3257 | /* Seems PCMCIA handles this internally. Not sure why. Seems | ||
3258 | * pretty bogus to force a driver to special case this. */ | ||
3259 | #ifndef PCMCIA | ||
3260 | if (!request_mem_region (ohci_base, OHCI1394_REGISTER_SIZE, OHCI1394_DRIVER_NAME)) | ||
3261 | FAIL(-ENOMEM, "MMIO resource (0x%lx - 0x%lx) unavailable", | ||
3262 | ohci_base, ohci_base + OHCI1394_REGISTER_SIZE); | ||
3263 | #endif | ||
3264 | ohci->init_state = OHCI_INIT_HAVE_MEM_REGION; | ||
3265 | |||
3266 | ohci->registers = ioremap(ohci_base, OHCI1394_REGISTER_SIZE); | ||
3267 | if (ohci->registers == NULL) | ||
3268 | FAIL(-ENXIO, "Failed to remap registers - card not accessible"); | ||
3269 | ohci->init_state = OHCI_INIT_HAVE_IOMAPPING; | ||
3270 | DBGMSG("Remapped memory spaces reg 0x%p", ohci->registers); | ||
3271 | |||
3272 | /* csr_config rom allocation */ | ||
3273 | ohci->csr_config_rom_cpu = | ||
3274 | pci_alloc_consistent(ohci->dev, OHCI_CONFIG_ROM_LEN, | ||
3275 | &ohci->csr_config_rom_bus); | ||
3276 | OHCI_DMA_ALLOC("consistent csr_config_rom"); | ||
3277 | if (ohci->csr_config_rom_cpu == NULL) | ||
3278 | FAIL(-ENOMEM, "Failed to allocate buffer config rom"); | ||
3279 | ohci->init_state = OHCI_INIT_HAVE_CONFIG_ROM_BUFFER; | ||
3280 | |||
3281 | /* self-id dma buffer allocation */ | ||
3282 | ohci->selfid_buf_cpu = | ||
3283 | pci_alloc_consistent(ohci->dev, OHCI1394_SI_DMA_BUF_SIZE, | ||
3284 | &ohci->selfid_buf_bus); | ||
3285 | OHCI_DMA_ALLOC("consistent selfid_buf"); | ||
3286 | |||
3287 | if (ohci->selfid_buf_cpu == NULL) | ||
3288 | FAIL(-ENOMEM, "Failed to allocate DMA buffer for self-id packets"); | ||
3289 | ohci->init_state = OHCI_INIT_HAVE_SELFID_BUFFER; | ||
3290 | |||
3291 | if ((unsigned long)ohci->selfid_buf_cpu & 0x1fff) | ||
3292 | PRINT(KERN_INFO, "SelfID buffer %p is not aligned on " | ||
3293 | "8Kb boundary... may cause problems on some CXD3222 chip", | ||
3294 | ohci->selfid_buf_cpu); | ||
3295 | |||
3296 | /* No self-id errors at startup */ | ||
3297 | ohci->self_id_errors = 0; | ||
3298 | |||
3299 | ohci->init_state = OHCI_INIT_HAVE_TXRX_BUFFERS__MAYBE; | ||
3300 | /* AR DMA request context allocation */ | ||
3301 | if (alloc_dma_rcv_ctx(ohci, &ohci->ar_req_context, | ||
3302 | DMA_CTX_ASYNC_REQ, 0, AR_REQ_NUM_DESC, | ||
3303 | AR_REQ_BUF_SIZE, AR_REQ_SPLIT_BUF_SIZE, | ||
3304 | OHCI1394_AsReqRcvContextBase) < 0) | ||
3305 | FAIL(-ENOMEM, "Failed to allocate AR Req context"); | ||
3306 | |||
3307 | /* AR DMA response context allocation */ | ||
3308 | if (alloc_dma_rcv_ctx(ohci, &ohci->ar_resp_context, | ||
3309 | DMA_CTX_ASYNC_RESP, 0, AR_RESP_NUM_DESC, | ||
3310 | AR_RESP_BUF_SIZE, AR_RESP_SPLIT_BUF_SIZE, | ||
3311 | OHCI1394_AsRspRcvContextBase) < 0) | ||
3312 | FAIL(-ENOMEM, "Failed to allocate AR Resp context"); | ||
3313 | |||
3314 | /* AT DMA request context */ | ||
3315 | if (alloc_dma_trm_ctx(ohci, &ohci->at_req_context, | ||
3316 | DMA_CTX_ASYNC_REQ, 0, AT_REQ_NUM_DESC, | ||
3317 | OHCI1394_AsReqTrContextBase) < 0) | ||
3318 | FAIL(-ENOMEM, "Failed to allocate AT Req context"); | ||
3319 | |||
3320 | /* AT DMA response context */ | ||
3321 | if (alloc_dma_trm_ctx(ohci, &ohci->at_resp_context, | ||
3322 | DMA_CTX_ASYNC_RESP, 1, AT_RESP_NUM_DESC, | ||
3323 | OHCI1394_AsRspTrContextBase) < 0) | ||
3324 | FAIL(-ENOMEM, "Failed to allocate AT Resp context"); | ||
3325 | |||
3326 | /* Start off with a soft reset, to clear everything to a sane | ||
3327 | * state. */ | ||
3328 | ohci_soft_reset(ohci); | ||
3329 | |||
3330 | /* Now enable LPS, which we need in order to start accessing | ||
3331 | * most of the registers. In fact, on some cards (ALI M5251), | ||
3332 | * accessing registers in the SClk domain without LPS enabled | ||
3333 | * will lock up the machine. Wait 50msec to make sure we have | ||
3334 | * full link enabled. */ | ||
3335 | reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS); | ||
3336 | |||
3337 | /* Disable and clear interrupts */ | ||
3338 | reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff); | ||
3339 | reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff); | ||
3340 | |||
3341 | mdelay(50); | ||
3342 | |||
3343 | /* Determine the number of available IR and IT contexts. */ | ||
3344 | ohci->nb_iso_rcv_ctx = | ||
3345 | get_nb_iso_ctx(ohci, OHCI1394_IsoRecvIntMaskSet); | ||
3346 | DBGMSG("%d iso receive contexts available", | ||
3347 | ohci->nb_iso_rcv_ctx); | ||
3348 | |||
3349 | ohci->nb_iso_xmit_ctx = | ||
3350 | get_nb_iso_ctx(ohci, OHCI1394_IsoXmitIntMaskSet); | ||
3351 | DBGMSG("%d iso transmit contexts available", | ||
3352 | ohci->nb_iso_xmit_ctx); | ||
3353 | |||
3354 | /* Set the usage bits for non-existent contexts so they can't | ||
3355 | * be allocated */ | ||
3356 | ohci->ir_ctx_usage = ~0 << ohci->nb_iso_rcv_ctx; | ||
3357 | ohci->it_ctx_usage = ~0 << ohci->nb_iso_xmit_ctx; | ||
3358 | |||
3359 | INIT_LIST_HEAD(&ohci->iso_tasklet_list); | ||
3360 | spin_lock_init(&ohci->iso_tasklet_list_lock); | ||
3361 | ohci->ISO_channel_usage = 0; | ||
3362 | spin_lock_init(&ohci->IR_channel_lock); | ||
3363 | |||
3364 | /* Allocate the IR DMA context right here so we don't have | ||
3365 | * to do it in interrupt path - note that this doesn't | ||
3366 | * waste much memory and avoids the jugglery required to | ||
3367 | * allocate it in IRQ path. */ | ||
3368 | if (alloc_dma_rcv_ctx(ohci, &ohci->ir_legacy_context, | ||
3369 | DMA_CTX_ISO, 0, IR_NUM_DESC, | ||
3370 | IR_BUF_SIZE, IR_SPLIT_BUF_SIZE, | ||
3371 | OHCI1394_IsoRcvContextBase) < 0) { | ||
3372 | FAIL(-ENOMEM, "Cannot allocate IR Legacy DMA context"); | ||
3373 | } | ||
3374 | |||
3375 | /* We hopefully don't have to pre-allocate IT DMA like we did | ||
3376 | * for IR DMA above. Allocate it on-demand and mark inactive. */ | ||
3377 | ohci->it_legacy_context.ohci = NULL; | ||
3378 | |||
3379 | if (request_irq(dev->irq, ohci_irq_handler, SA_SHIRQ, | ||
3380 | OHCI1394_DRIVER_NAME, ohci)) | ||
3381 | FAIL(-ENOMEM, "Failed to allocate shared interrupt %d", dev->irq); | ||
3382 | |||
3383 | ohci->init_state = OHCI_INIT_HAVE_IRQ; | ||
3384 | ohci_initialize(ohci); | ||
3385 | |||
3386 | /* Set certain csr values */ | ||
3387 | host->csr.guid_hi = reg_read(ohci, OHCI1394_GUIDHi); | ||
3388 | host->csr.guid_lo = reg_read(ohci, OHCI1394_GUIDLo); | ||
3389 | host->csr.cyc_clk_acc = 100; /* how do we determine clk accuracy? */ | ||
3390 | host->csr.max_rec = (reg_read(ohci, OHCI1394_BusOptions) >> 12) & 0xf; | ||
3391 | host->csr.lnk_spd = reg_read(ohci, OHCI1394_BusOptions) & 0x7; | ||
3392 | |||
3393 | /* Tell the highlevel this host is ready */ | ||
3394 | if (hpsb_add_host(host)) | ||
3395 | FAIL(-ENOMEM, "Failed to register host with highlevel"); | ||
3396 | |||
3397 | ohci->init_state = OHCI_INIT_DONE; | ||
3398 | |||
3399 | return 0; | ||
3400 | #undef FAIL | ||
3401 | } | ||
3402 | |||
3403 | static void ohci1394_pci_remove(struct pci_dev *pdev) | ||
3404 | { | ||
3405 | struct ti_ohci *ohci; | ||
3406 | struct device *dev; | ||
3407 | |||
3408 | ohci = pci_get_drvdata(pdev); | ||
3409 | if (!ohci) | ||
3410 | return; | ||
3411 | |||
3412 | dev = get_device(&ohci->host->device); | ||
3413 | |||
3414 | switch (ohci->init_state) { | ||
3415 | case OHCI_INIT_DONE: | ||
3416 | stop_dma_rcv_ctx(&ohci->ir_legacy_context); | ||
3417 | hpsb_remove_host(ohci->host); | ||
3418 | |||
3419 | /* Clear out BUS Options */ | ||
3420 | reg_write(ohci, OHCI1394_ConfigROMhdr, 0); | ||
3421 | reg_write(ohci, OHCI1394_BusOptions, | ||
3422 | (reg_read(ohci, OHCI1394_BusOptions) & 0x0000f007) | | ||
3423 | 0x00ff0000); | ||
3424 | memset(ohci->csr_config_rom_cpu, 0, OHCI_CONFIG_ROM_LEN); | ||
3425 | |||
3426 | case OHCI_INIT_HAVE_IRQ: | ||
3427 | /* Clear interrupt registers */ | ||
3428 | reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff); | ||
3429 | reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff); | ||
3430 | reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff); | ||
3431 | reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff); | ||
3432 | reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 0xffffffff); | ||
3433 | reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 0xffffffff); | ||
3434 | |||
3435 | /* Disable IRM Contender */ | ||
3436 | set_phy_reg(ohci, 4, ~0xc0 & get_phy_reg(ohci, 4)); | ||
3437 | |||
3438 | /* Clear link control register */ | ||
3439 | reg_write(ohci, OHCI1394_LinkControlClear, 0xffffffff); | ||
3440 | |||
3441 | /* Let all other nodes know to ignore us */ | ||
3442 | ohci_devctl(ohci->host, RESET_BUS, LONG_RESET_NO_FORCE_ROOT); | ||
3443 | |||
3444 | /* Soft reset before we start - this disables | ||
3445 | * interrupts and clears linkEnable and LPS. */ | ||
3446 | ohci_soft_reset(ohci); | ||
3447 | free_irq(ohci->dev->irq, ohci); | ||
3448 | |||
3449 | case OHCI_INIT_HAVE_TXRX_BUFFERS__MAYBE: | ||
3450 | /* The ohci_soft_reset() stops all DMA contexts, so we | ||
3451 | * dont need to do this. */ | ||
3452 | /* Free AR dma */ | ||
3453 | free_dma_rcv_ctx(&ohci->ar_req_context); | ||
3454 | free_dma_rcv_ctx(&ohci->ar_resp_context); | ||
3455 | |||
3456 | /* Free AT dma */ | ||
3457 | free_dma_trm_ctx(&ohci->at_req_context); | ||
3458 | free_dma_trm_ctx(&ohci->at_resp_context); | ||
3459 | |||
3460 | /* Free IR dma */ | ||
3461 | free_dma_rcv_ctx(&ohci->ir_legacy_context); | ||
3462 | |||
3463 | /* Free IT dma */ | ||
3464 | free_dma_trm_ctx(&ohci->it_legacy_context); | ||
3465 | |||
3466 | /* Free IR legacy dma */ | ||
3467 | free_dma_rcv_ctx(&ohci->ir_legacy_context); | ||
3468 | |||
3469 | |||
3470 | case OHCI_INIT_HAVE_SELFID_BUFFER: | ||
3471 | pci_free_consistent(ohci->dev, OHCI1394_SI_DMA_BUF_SIZE, | ||
3472 | ohci->selfid_buf_cpu, | ||
3473 | ohci->selfid_buf_bus); | ||
3474 | OHCI_DMA_FREE("consistent selfid_buf"); | ||
3475 | |||
3476 | case OHCI_INIT_HAVE_CONFIG_ROM_BUFFER: | ||
3477 | pci_free_consistent(ohci->dev, OHCI_CONFIG_ROM_LEN, | ||
3478 | ohci->csr_config_rom_cpu, | ||
3479 | ohci->csr_config_rom_bus); | ||
3480 | OHCI_DMA_FREE("consistent csr_config_rom"); | ||
3481 | |||
3482 | case OHCI_INIT_HAVE_IOMAPPING: | ||
3483 | iounmap(ohci->registers); | ||
3484 | |||
3485 | case OHCI_INIT_HAVE_MEM_REGION: | ||
3486 | #ifndef PCMCIA | ||
3487 | release_mem_region(pci_resource_start(ohci->dev, 0), | ||
3488 | OHCI1394_REGISTER_SIZE); | ||
3489 | #endif | ||
3490 | |||
3491 | #ifdef CONFIG_PPC_PMAC | ||
3492 | /* On UniNorth, power down the cable and turn off the chip | ||
3493 | * clock when the module is removed to save power on | ||
3494 | * laptops. Turning it back ON is done by the arch code when | ||
3495 | * pci_enable_device() is called */ | ||
3496 | { | ||
3497 | struct device_node* of_node; | ||
3498 | |||
3499 | of_node = pci_device_to_OF_node(ohci->dev); | ||
3500 | if (of_node) { | ||
3501 | pmac_call_feature(PMAC_FTR_1394_ENABLE, of_node, 0, 0); | ||
3502 | pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, of_node, 0, 0); | ||
3503 | } | ||
3504 | } | ||
3505 | #endif /* CONFIG_PPC_PMAC */ | ||
3506 | |||
3507 | case OHCI_INIT_ALLOC_HOST: | ||
3508 | pci_set_drvdata(ohci->dev, NULL); | ||
3509 | } | ||
3510 | |||
3511 | if (dev) | ||
3512 | put_device(dev); | ||
3513 | } | ||
3514 | |||
3515 | |||
3516 | static int ohci1394_pci_resume (struct pci_dev *pdev) | ||
3517 | { | ||
3518 | #ifdef CONFIG_PMAC_PBOOK | ||
3519 | { | ||
3520 | struct device_node *of_node; | ||
3521 | |||
3522 | /* Re-enable 1394 */ | ||
3523 | of_node = pci_device_to_OF_node (pdev); | ||
3524 | if (of_node) | ||
3525 | pmac_call_feature (PMAC_FTR_1394_ENABLE, of_node, 0, 1); | ||
3526 | } | ||
3527 | #endif | ||
3528 | |||
3529 | pci_enable_device(pdev); | ||
3530 | |||
3531 | return 0; | ||
3532 | } | ||
3533 | |||
3534 | |||
3535 | static int ohci1394_pci_suspend (struct pci_dev *pdev, pm_message_t state) | ||
3536 | { | ||
3537 | #ifdef CONFIG_PMAC_PBOOK | ||
3538 | { | ||
3539 | struct device_node *of_node; | ||
3540 | |||
3541 | /* Disable 1394 */ | ||
3542 | of_node = pci_device_to_OF_node (pdev); | ||
3543 | if (of_node) | ||
3544 | pmac_call_feature(PMAC_FTR_1394_ENABLE, of_node, 0, 0); | ||
3545 | } | ||
3546 | #endif | ||
3547 | |||
3548 | return 0; | ||
3549 | } | ||
3550 | |||
3551 | |||
3552 | #define PCI_CLASS_FIREWIRE_OHCI ((PCI_CLASS_SERIAL_FIREWIRE << 8) | 0x10) | ||
3553 | |||
3554 | static struct pci_device_id ohci1394_pci_tbl[] = { | ||
3555 | { | ||
3556 | .class = PCI_CLASS_FIREWIRE_OHCI, | ||
3557 | .class_mask = PCI_ANY_ID, | ||
3558 | .vendor = PCI_ANY_ID, | ||
3559 | .device = PCI_ANY_ID, | ||
3560 | .subvendor = PCI_ANY_ID, | ||
3561 | .subdevice = PCI_ANY_ID, | ||
3562 | }, | ||
3563 | { 0, }, | ||
3564 | }; | ||
3565 | |||
3566 | MODULE_DEVICE_TABLE(pci, ohci1394_pci_tbl); | ||
3567 | |||
3568 | static struct pci_driver ohci1394_pci_driver = { | ||
3569 | .name = OHCI1394_DRIVER_NAME, | ||
3570 | .id_table = ohci1394_pci_tbl, | ||
3571 | .probe = ohci1394_pci_probe, | ||
3572 | .remove = ohci1394_pci_remove, | ||
3573 | .resume = ohci1394_pci_resume, | ||
3574 | .suspend = ohci1394_pci_suspend, | ||
3575 | }; | ||
3576 | |||
3577 | |||
3578 | |||
3579 | /*********************************** | ||
3580 | * OHCI1394 Video Interface * | ||
3581 | ***********************************/ | ||
3582 | |||
3583 | /* essentially the only purpose of this code is to allow another | ||
3584 | module to hook into ohci's interrupt handler */ | ||
3585 | |||
3586 | int ohci1394_stop_context(struct ti_ohci *ohci, int reg, char *msg) | ||
3587 | { | ||
3588 | int i=0; | ||
3589 | |||
3590 | /* stop the channel program if it's still running */ | ||
3591 | reg_write(ohci, reg, 0x8000); | ||
3592 | |||
3593 | /* Wait until it effectively stops */ | ||
3594 | while (reg_read(ohci, reg) & 0x400) { | ||
3595 | i++; | ||
3596 | if (i>5000) { | ||
3597 | PRINT(KERN_ERR, | ||
3598 | "Runaway loop while stopping context: %s...", msg ? msg : ""); | ||
3599 | return 1; | ||
3600 | } | ||
3601 | |||
3602 | mb(); | ||
3603 | udelay(10); | ||
3604 | } | ||
3605 | if (msg) PRINT(KERN_ERR, "%s: dma prg stopped", msg); | ||
3606 | return 0; | ||
3607 | } | ||
3608 | |||
3609 | void ohci1394_init_iso_tasklet(struct ohci1394_iso_tasklet *tasklet, int type, | ||
3610 | void (*func)(unsigned long), unsigned long data) | ||
3611 | { | ||
3612 | tasklet_init(&tasklet->tasklet, func, data); | ||
3613 | tasklet->type = type; | ||
3614 | /* We init the tasklet->link field, so we can list_del() it | ||
3615 | * without worrying whether it was added to the list or not. */ | ||
3616 | INIT_LIST_HEAD(&tasklet->link); | ||
3617 | } | ||
3618 | |||
3619 | int ohci1394_register_iso_tasklet(struct ti_ohci *ohci, | ||
3620 | struct ohci1394_iso_tasklet *tasklet) | ||
3621 | { | ||
3622 | unsigned long flags, *usage; | ||
3623 | int n, i, r = -EBUSY; | ||
3624 | |||
3625 | if (tasklet->type == OHCI_ISO_TRANSMIT) { | ||
3626 | n = ohci->nb_iso_xmit_ctx; | ||
3627 | usage = &ohci->it_ctx_usage; | ||
3628 | } | ||
3629 | else { | ||
3630 | n = ohci->nb_iso_rcv_ctx; | ||
3631 | usage = &ohci->ir_ctx_usage; | ||
3632 | |||
3633 | /* only one receive context can be multichannel (OHCI sec 10.4.1) */ | ||
3634 | if (tasklet->type == OHCI_ISO_MULTICHANNEL_RECEIVE) { | ||
3635 | if (test_and_set_bit(0, &ohci->ir_multichannel_used)) { | ||
3636 | return r; | ||
3637 | } | ||
3638 | } | ||
3639 | } | ||
3640 | |||
3641 | spin_lock_irqsave(&ohci->iso_tasklet_list_lock, flags); | ||
3642 | |||
3643 | for (i = 0; i < n; i++) | ||
3644 | if (!test_and_set_bit(i, usage)) { | ||
3645 | tasklet->context = i; | ||
3646 | list_add_tail(&tasklet->link, &ohci->iso_tasklet_list); | ||
3647 | r = 0; | ||
3648 | break; | ||
3649 | } | ||
3650 | |||
3651 | spin_unlock_irqrestore(&ohci->iso_tasklet_list_lock, flags); | ||
3652 | |||
3653 | return r; | ||
3654 | } | ||
3655 | |||
3656 | void ohci1394_unregister_iso_tasklet(struct ti_ohci *ohci, | ||
3657 | struct ohci1394_iso_tasklet *tasklet) | ||
3658 | { | ||
3659 | unsigned long flags; | ||
3660 | |||
3661 | tasklet_kill(&tasklet->tasklet); | ||
3662 | |||
3663 | spin_lock_irqsave(&ohci->iso_tasklet_list_lock, flags); | ||
3664 | |||
3665 | if (tasklet->type == OHCI_ISO_TRANSMIT) | ||
3666 | clear_bit(tasklet->context, &ohci->it_ctx_usage); | ||
3667 | else { | ||
3668 | clear_bit(tasklet->context, &ohci->ir_ctx_usage); | ||
3669 | |||
3670 | if (tasklet->type == OHCI_ISO_MULTICHANNEL_RECEIVE) { | ||
3671 | clear_bit(0, &ohci->ir_multichannel_used); | ||
3672 | } | ||
3673 | } | ||
3674 | |||
3675 | list_del(&tasklet->link); | ||
3676 | |||
3677 | spin_unlock_irqrestore(&ohci->iso_tasklet_list_lock, flags); | ||
3678 | } | ||
3679 | |||
3680 | EXPORT_SYMBOL(ohci1394_stop_context); | ||
3681 | EXPORT_SYMBOL(ohci1394_init_iso_tasklet); | ||
3682 | EXPORT_SYMBOL(ohci1394_register_iso_tasklet); | ||
3683 | EXPORT_SYMBOL(ohci1394_unregister_iso_tasklet); | ||
3684 | |||
3685 | |||
3686 | /*********************************** | ||
3687 | * General module initialization * | ||
3688 | ***********************************/ | ||
3689 | |||
3690 | MODULE_AUTHOR("Sebastien Rougeaux <sebastien.rougeaux@anu.edu.au>"); | ||
3691 | MODULE_DESCRIPTION("Driver for PCI OHCI IEEE-1394 controllers"); | ||
3692 | MODULE_LICENSE("GPL"); | ||
3693 | |||
3694 | static void __exit ohci1394_cleanup (void) | ||
3695 | { | ||
3696 | pci_unregister_driver(&ohci1394_pci_driver); | ||
3697 | } | ||
3698 | |||
3699 | static int __init ohci1394_init(void) | ||
3700 | { | ||
3701 | return pci_register_driver(&ohci1394_pci_driver); | ||
3702 | } | ||
3703 | |||
3704 | module_init(ohci1394_init); | ||
3705 | module_exit(ohci1394_cleanup); | ||