2 files changed, 6 insertions, 95 deletions

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index d6a50d67b7db..e96c01260598 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -549,7 +549,10 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
         }
 
         /* Set the interrupt routine */
-        ide_set_handler(drive, ide_pc_intr, timeout, expiry);
+        ide_set_handler(drive,
+                        (dev_is_idecd(drive) ? drive->irq_handler
+                                             : ide_pc_intr),
+                        timeout, expiry);
 
         /* Begin DMA, if necessary */
         if (dev_is_idecd(drive)) {
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 2cb301dccd21..cae69372cf45 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -510,99 +510,6 @@ end_request:
         return 1;
 }
 
-static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *);
-static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
-
-/*
- * Set up the device registers for transferring a packet command on DEV,
- * expecting to later transfer XFERLEN bytes.  HANDLER is the routine
- * which actually transfers the command to the drive.  If this is a
- * drq_interrupt device, this routine will arrange for HANDLER to be
- * called when the interrupt from the drive arrives.  Otherwise, HANDLER
- * will be called immediately after the drive is prepared for the transfer.
- */
-static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive)
-{
-        ide_hwif_t *hwif = drive->hwif;
-        struct request *rq = hwif->rq;
-        int xferlen;
-
-        xferlen = ide_cd_get_xferlen(rq);
-
-        ide_debug_log(IDE_DBG_PC, "Call %s, xferlen: %d\n", __func__, xferlen);
-
-        /* FIXME: for Virtual DMA we must check harder */
-        if (drive->dma)
-                drive->dma = !hwif->dma_ops->dma_setup(drive);
-
-        /* set up the controller registers */
-        ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL,
-                           xferlen, drive->dma);
-
-        if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
-                /* waiting for CDB interrupt, not DMA yet. */
-                if (drive->dma)
-                        drive->waiting_for_dma = 0;
-
-                /* packet command */
-                ide_execute_command(drive, ATA_CMD_PACKET,
-                                    cdrom_transfer_packet_command,
-                                    ATAPI_WAIT_PC, ide_cd_expiry);
-                return ide_started;
-        } else {
-                ide_execute_pkt_cmd(drive);
-
-                return cdrom_transfer_packet_command(drive);
-        }
-}
-
-/*
- * Send a packet command to DRIVE described by CMD_BUF and CMD_LEN. The device
- * registers must have already been prepared by cdrom_start_packet_command.
- * HANDLER is the interrupt handler to call when the command completes or
- * there's data ready.
- */
-#define ATAPI_MIN_CDB_BYTES 12
-static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive)
-{
-        ide_hwif_t *hwif = drive->hwif;
-        struct request *rq = hwif->rq;
-        int cmd_len;
-        ide_startstop_t startstop;
-
-        ide_debug_log(IDE_DBG_PC, "Call %s\n", __func__);
-
-        /* we must wait for DRQ to get set */
-        if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) {
-                printk(KERN_ERR "%s: timeout while waiting for DRQ to assert\n",
-                                drive->name);
-                return startstop;
-        }
-
-        if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
-                /* ok, next interrupt will be DMA interrupt */
-                if (drive->dma)
-                        drive->waiting_for_dma = 1;
-        }
-
-        /* arm the interrupt handler */
-        ide_set_handler(drive, cdrom_newpc_intr, rq->timeout, ide_cd_expiry);
-
-        /* ATAPI commands get padded out to 12 bytes minimum */
-        cmd_len = COMMAND_SIZE(rq->cmd[0]);
-        if (cmd_len < ATAPI_MIN_CDB_BYTES)
-                cmd_len = ATAPI_MIN_CDB_BYTES;
-
-        /* start the DMA if need be */
-        if (drive->dma)
-                hwif->dma_ops->dma_start(drive);
-
-        /* send the command to the device */
-        hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len);
-
-        return ide_started;
-}
-
 /*
  * Check the contents of the interrupt reason register from the cdrom
  * and attempt to recover if there are problems.  Returns  0 if everything's
@@ -1174,7 +1081,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
                 return ide_stopped;
         }
 
-        return cdrom_start_packet_command(drive);
+        return ide_issue_pc(drive);
 }
 
 /*
@@ -2072,6 +1979,7 @@ static int ide_cd_probe(ide_drive_t *drive)
         }
 
         drive->debug_mask = debug_mask;
+        drive->irq_handler = cdrom_newpc_intr;
 
         info = kzalloc(sizeof(struct cdrom_info), GFP_KERNEL);
         if (info == NULL) {