1 files changed, 39 insertions, 40 deletions

diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 689786df1ede..463bfda84265 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/siimage.c              Version 1.17    Oct 18 2007
+ * linux/drivers/ide/pci/siimage.c              Version 1.18    Oct 18 2007
  *
  * Copyright (C) 2001-2002      Andre Hedrick <andre@linux-ide.org>
  * Copyright (C) 2003           Red Hat <alan@redhat.com>
@@ -57,8 +57,8 @@
  
 static int pdev_is_sata(struct pci_dev *pdev)
 {
-        switch(pdev->device)
-        {
+#ifdef CONFIG_BLK_DEV_IDE_SATA
+        switch(pdev->device) {
                 case PCI_DEVICE_ID_SII_3112:
                 case PCI_DEVICE_ID_SII_1210SA:
                         return 1;
@@ -66,9 +66,10 @@ static int pdev_is_sata(struct pci_dev *pdev)
                         return 0;
         }
         BUG();
+#endif
         return 0;
 }
- 
+
 /**
  *      is_sata                 -       check if hwif is SATA
  *      @hwif:  interface to check
@@ -136,7 +137,7 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
  *      SI3112 SATA controller life is a bit simpler.
  */
 
-static u8 sil_udma_filter(ide_drive_t *drive)
+static u8 sil_pata_udma_filter(ide_drive_t *drive)
 {
         ide_hwif_t *hwif = drive->hwif;
         unsigned long base = (unsigned long) hwif->hwif_data;
@@ -147,23 +148,23 @@ static u8 sil_udma_filter(ide_drive_t *drive)
         else
                 pci_read_config_byte(hwif->pci_dev, 0x8A, &scsc);
 
-        if (is_sata(hwif)) {
-                mask = strstr(drive->id->model, "Maxtor") ? 0x3f : 0x7f;
-                goto out;
-        }
-
         if ((scsc & 0x30) == 0x10)      /* 133 */
-                mask = 0x7f;
+                mask = ATA_UDMA6;
         else if ((scsc & 0x30) == 0x20) /* 2xPCI */
-                mask = 0x7f;
+                mask = ATA_UDMA6;
         else if ((scsc & 0x30) == 0x00) /* 100 */
-                mask = 0x3f;
+                mask = ATA_UDMA5;
         else    /* Disabled ? */
                 BUG();
-out:
+
         return mask;
 }
 
+static u8 sil_sata_udma_filter(ide_drive_t *drive)
+{
+        return strstr(drive->id->model, "Maxtor") ? ATA_UDMA5 : ATA_UDMA6;
+}
+
 /**
  *      sil_set_pio_mode        -       set host controller for PIO mode
  *      @drive: drive
@@ -340,10 +341,11 @@ static int siimage_io_ide_dma_test_irq (ide_drive_t *drive)
 static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive)
 {
         ide_hwif_t *hwif        = HWIF(drive);
-        unsigned long base      = (unsigned long)hwif->hwif_data;
         unsigned long addr      = siimage_selreg(hwif, 0x1);
 
         if (SATA_ERROR_REG) {
+                unsigned long base = (unsigned long)hwif->hwif_data;
+
                 u32 ext_stat = readl((void __iomem *)(base + 0x10));
                 u8 watchdog = 0;
                 if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) {
@@ -376,7 +378,7 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive)
 }
 
 /**
- *      siimage_busproc         -       bus isolation ioctl
+ *      sil_sata_busproc        -       bus isolation IOCTL
  *      @drive: drive to isolate/restore
  *      @state: bus state to set
  *
@@ -384,8 +386,8 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive)
  *      SATA controller the work required is quite limited, we 
  *      just have to clean up the statistics
  */
- 
-static int siimage_busproc (ide_drive_t * drive, int state)
+
+static int sil_sata_busproc(ide_drive_t * drive, int state)
 {
         ide_hwif_t *hwif        = HWIF(drive);
         u32 stat_config         = 0;
@@ -417,14 +419,14 @@ static int siimage_busproc (ide_drive_t * drive, int state)
 }
 
 /**
- *      siimage_reset_poll      -       wait for sata reset
+ *      sil_sata_reset_poll     -       wait for SATA reset
  *      @drive: drive we are resetting
  *
  *      Poll the SATA phy and see whether it has come back from the dead
  *      yet.
  */
- 
-static int siimage_reset_poll (ide_drive_t *drive)
+
+static int sil_sata_reset_poll(ide_drive_t *drive)
 {
         if (SATA_STATUS_REG) {
                 ide_hwif_t *hwif        = HWIF(drive);
@@ -436,27 +438,22 @@ static int siimage_reset_poll (ide_drive_t *drive)
                         HWGROUP(drive)->polling = 0;
                         return ide_started;
                 }
-                return 0;
-        } else {
-                return 0;
         }
+
+        return 0;
 }
 
 /**
- *      siimage_pre_reset       -       reset hook
+ *      sil_sata_pre_reset      -       reset hook
  *      @drive: IDE device being reset
  *
  *      For the SATA devices we need to handle recalibration/geometry
  *      differently
  */
- 
-static void siimage_pre_reset (ide_drive_t *drive)
-{
-        if (drive->media != ide_disk)
-                return;
 
-        if (is_sata(HWIF(drive)))
-        {
+static void sil_sata_pre_reset(ide_drive_t *drive)
+{
+        if (drive->media == ide_disk) {
                 drive->special.b.set_geometry = 0;
                 drive->special.b.recalibrate = 0;
         }
@@ -502,7 +499,6 @@ static void siimage_reset (ide_drive_t *drive)
                         drive->failures++;
                 }
         }
-
 }
 
 /**
@@ -864,28 +860,31 @@ static u8 __devinit ata66_siimage(ide_hwif_t *hwif)
 
 static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
 {
+        u8 sata = is_sata(hwif);
+
         hwif->resetproc = &siimage_reset;
         hwif->set_pio_mode = &sil_set_pio_mode;
         hwif->set_dma_mode = &sil_set_dma_mode;
-        hwif->reset_poll = &siimage_reset_poll;
-        hwif->pre_reset = &siimage_pre_reset;
-        hwif->udma_filter = &sil_udma_filter;
 
-        if(is_sata(hwif)) {
+        if (sata) {
                 static int first = 1;
 
-                hwif->busproc   = &siimage_busproc;
+                hwif->busproc = &sil_sata_busproc;
+                hwif->reset_poll = &sil_sata_reset_poll;
+                hwif->pre_reset = &sil_sata_pre_reset;
+                hwif->udma_filter = &sil_sata_udma_filter;
 
                 if (first) {
                         printk(KERN_INFO "siimage: For full SATA support you should use the libata sata_sil module.\n");
                         first = 0;
                 }
-        }
+        } else
+                hwif->udma_filter = &sil_pata_udma_filter;
 
         if (hwif->dma_base == 0)
                 return;
 
-        if (is_sata(hwif))
+        if (sata)
                 hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
 
         if (hwif->cbl != ATA_CBL_PATA40_SHORT)