2 files changed, 36 insertions, 28 deletions

diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c
index f0e638dcc3ab..236f9c38e519 100644
--- a/drivers/ide/ppc/mpc8xx.c
+++ b/drivers/ide/ppc/mpc8xx.c
@@ -303,6 +303,8 @@ static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port)
         pcmp->pcmc_per = 0x100000 >> (16 * _slot_);
 #endif  /* CONFIG_IDE_8xx_PCCARD */
 
+        hw->chipset = ide_generic;
+
         return 0;
 }
 #endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */
@@ -377,6 +379,8 @@ static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port)
         ((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |=
                         (0x80000000 >> ioport_dsc[data_port].irq);
 
+        hw->chipset = ide_generic;
+
         return 0;
 }
 #endif  /* CONFIG_IDE_8xx_DIRECT */
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 48aa019127bc..ba2d58727964 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -59,7 +59,6 @@ typedef struct pmac_ide_hwif {
         int                             irq;
         int                             kind;
         int                             aapl_bus_id;
-        unsigned                        cable_80 : 1;
         unsigned                        mediabay : 1;
         unsigned                        broken_dma : 1;
         unsigned                        broken_dma_warn : 1;
@@ -918,10 +917,40 @@ pmac_ide_do_resume(ide_hwif_t *hwif)
         return 0;
 }
 
+static u8 pmac_ide_cable_detect(ide_hwif_t *hwif)
+{
+        pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)ide_get_hwifdata(hwif);
+        struct device_node *np = pmif->node;
+        const char *cable = of_get_property(np, "cable-type", NULL);
+
+        /* Get cable type from device-tree. */
+        if (cable && !strncmp(cable, "80-", 3))
+                return ATA_CBL_PATA80;
+
+        /*
+         * G5's seem to have incorrect cable type in device-tree.
+         * Let's assume they have a 80 conductor cable, this seem
+         * to be always the case unless the user mucked around.
+         */
+        if (of_device_is_compatible(np, "K2-UATA") ||
+            of_device_is_compatible(np, "shasta-ata"))
+                return ATA_CBL_PATA80;
+
+        return ATA_CBL_PATA40;
+}
+
 static const struct ide_port_ops pmac_ide_ata6_port_ops = {
         .set_pio_mode           = pmac_ide_set_pio_mode,
         .set_dma_mode           = pmac_ide_set_dma_mode,
         .selectproc             = pmac_ide_kauai_selectproc,
+        .cable_detect           = pmac_ide_cable_detect,
+};
+
+static const struct ide_port_ops pmac_ide_ata4_port_ops = {
+        .set_pio_mode           = pmac_ide_set_pio_mode,
+        .set_dma_mode           = pmac_ide_set_dma_mode,
+        .selectproc             = pmac_ide_selectproc,
+        .cable_detect           = pmac_ide_cable_detect,
 };
 
 static const struct ide_port_ops pmac_ide_port_ops = {
@@ -949,10 +978,7 @@ static const struct ide_port_info pmac_port_info = {
 
 /*
  * Setup, register & probe an IDE channel driven by this driver, this is
- * called by one of the 2 probe functions (macio or PCI). Note that a channel
- * that ends up beeing free of any device is not kept around by this driver
- * (it is kept in 2.4). This introduce an interface numbering change on some
- * rare machines unfortunately, but it's better this way.
+ * called by one of the 2 probe functions (macio or PCI).
  */
 static int __devinit
 pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
@@ -962,7 +988,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
         u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
         struct ide_port_info d = pmac_port_info;
 
-        pmif->cable_80 = 0;
         pmif->broken_dma = pmif->broken_dma_warn = 0;
         if (of_device_is_compatible(np, "shasta-ata")) {
                 pmif->kind = controller_sh_ata6;
@@ -979,6 +1004,7 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
         } else if (of_device_is_compatible(np, "keylargo-ata")) {
                 if (strcmp(np->name, "ata-4") == 0) {
                         pmif->kind = controller_kl_ata4;
+                        d.port_ops = &pmac_ide_ata4_port_ops;
                         d.udma_mask = ATA_UDMA4;
                 } else
                         pmif->kind = controller_kl_ata3;
@@ -992,22 +1018,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
         bidp = of_get_property(np, "AAPL,bus-id", NULL);
         pmif->aapl_bus_id =  bidp ? *bidp : 0;
 
-        /* Get cable type from device-tree */
-        if (pmif->kind == controller_kl_ata4 || pmif->kind == controller_un_ata6
-            || pmif->kind == controller_k2_ata6
-            || pmif->kind == controller_sh_ata6) {
-                const char* cable = of_get_property(np, "cable-type", NULL);
-                if (cable && !strncmp(cable, "80-", 3))
-                        pmif->cable_80 = 1;
-        }
-        /* G5's seem to have incorrect cable type in device-tree. Let's assume
-         * they have a 80 conductor cable, this seem to be always the case unless
-         * the user mucked around
-         */
-        if (of_device_is_compatible(np, "K2-UATA") ||
-            of_device_is_compatible(np, "shasta-ata"))
-                pmif->cable_80 = 1;
-
         /* On Kauai-type controllers, we make sure the FCR is correct */
         if (pmif->kauai_fcr)
                 writel(KAUAI_FCR_UATA_MAGIC |
@@ -1053,7 +1063,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
 
         hwif->hwif_data = pmif;
         ide_init_port_hw(hwif, hw);
-        hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
 
         printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n",
                hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
@@ -1070,11 +1079,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
                 }
         }
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-        if (pmif->cable_80 == 0)
-                d.udma_mask &= ATA_UDMA2;
-#endif
-
         idx[0] = hwif->index;
 
         ide_device_add(idx, &d);