10 files changed, 127 insertions, 118 deletions

diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 4debd18d52f8..83e0aa65a431 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/alim15x3.c             Version 0.17    2003/01/02
+ * linux/drivers/ide/pci/alim15x3.c             Version 0.21    2007/02/03
  *
  *  Copyright (C) 1998-2000 Michel Aubry, Maintainer
  *  Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
@@ -9,6 +9,7 @@
  *  May be copied or modified under the terms of the GNU General Public License
  *  Copyright (C) 2002 Alan Cox <alan@redhat.com>
  *  ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw>
+ *  Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
  *
  *  (U)DMA capable version of ali 1533/1543(C), 1535(D)
  *
@@ -280,15 +281,17 @@ static int ali_get_info (char *buffer, char **addr, off_t offset, int count)
 #endif  /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) */
 
 /**
- *      ali15x3_tune_drive      -       set up a drive
+ *      ali15x3_tune_pio        -       set up chipset for PIO mode
  *      @drive: drive to tune
- *      @pio: unused
+ *      @pio: desired mode
  *
- *      Select the best PIO timing for the drive in question. Then
- *      program the controller for this drive set up
+ *      Select the best PIO mode for the drive in question.
+ *      Then program the controller for this mode.
+ *
+ *      Returns the PIO mode programmed.
  */
  
-static void ali15x3_tune_drive (ide_drive_t *drive, u8 pio)
+static u8 ali15x3_tune_pio (ide_drive_t *drive, u8 pio)
 {
         ide_pio_data_t d;
         ide_hwif_t *hwif = HWIF(drive);
@@ -356,6 +359,22 @@ static void ali15x3_tune_drive (ide_drive_t *drive, u8 pio)
          * { 20,   50,     30  }    PIO Mode 5 with IORDY (nonstandard)
          */
 
+        return pio;
+}
+
+/**
+ *      ali15x3_tune_drive      -       set up drive for PIO mode
+ *      @drive: drive to tune
+ *      @pio: desired mode
+ *
+ *      Program the controller with the best PIO timing for the given drive.
+ *      Then set up the drive itself.
+ */
+
+static void ali15x3_tune_drive (ide_drive_t *drive, u8 pio)
+{
+        pio = ali15x3_tune_pio(drive, pio);
+        (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
 }
 
 /**
@@ -430,7 +449,7 @@ static u8 ali15x3_ratemask (ide_drive_t *drive)
 }
 
 /**
- *      ali15x3_tune_chipset    -       set up chiset for new speed
+ *      ali15x3_tune_chipset    -       set up chipset/drive for new speed
  *      @drive: drive to configure for
  *      @xferspeed: desired speed
  *
@@ -461,7 +480,7 @@ static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed)
                 pci_write_config_byte(dev, m5229_udma, tmpbyte);
 
                 if (speed < XFER_SW_DMA_0)
-                        ali15x3_tune_drive(drive, speed);
+                        (void) ali15x3_tune_pio(drive, speed - XFER_PIO_0);
         } else {
                 pci_read_config_byte(dev, m5229_udma, &tmpbyte);
                 tmpbyte &= (0x0f << ((1-unit) << 2));
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index 61b5f9c0b2f4..dc43f009acab 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -98,7 +98,6 @@
  *                       (patch courtesy of Zoltan Hidvegi)
  */
 
-#undef REALLY_SLOW_IO           /* most systems can safely undef this */
 #define CMD640_PREFETCH_MASKS 1
 
 //#define CMD640_DUMP_REGS
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 49df27513da7..b0d4825c56a9 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -1,6 +1,6 @@
 /* $Id: cmd64x.c,v 1.21 2000/01/30 23:23:16
  *
- * linux/drivers/ide/pci/cmd64x.c               Version 1.30    Sept 10, 2002
+ * linux/drivers/ide/pci/cmd64x.c               Version 1.41    Feb 3, 2007
  *
  * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
  *           Note, this driver is not used at all on other systems because
@@ -12,6 +12,7 @@
  * Copyright (C) 1998           David S. Miller (davem@redhat.com)
  *
  * Copyright (C) 1999-2002      Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2007           MontaVista Software, Inc. <source@mvista.com>
  */
 
 #include <linux/module.h>
@@ -262,43 +263,25 @@ static void program_drive_counts (ide_drive_t *drive, int setup_count, int activ
 }
 
 /*
- * Attempts to set the interface PIO mode.
- * The preferred method of selecting PIO modes (e.g. mode 4) is 
- * "echo 'piomode:4' > /proc/ide/hdx/settings".  Special cases are
- * 8: prefetch off, 9: prefetch on, 255: auto-select best mode.
- * Called with 255 at boot time.
+ * This routine selects drive's best PIO mode, calculates setup/active/recovery
+ * counts, and then writes them into the chipset registers.
  */
-
-static void cmd64x_tuneproc (ide_drive_t *drive, u8 mode_wanted)
+static u8 cmd64x_tune_pio (ide_drive_t *drive, u8 mode_wanted)
 {
         int setup_time, active_time, recovery_time;
         int clock_time, pio_mode, cycle_time;
         u8 recovery_count2, cycle_count;
         int setup_count, active_count, recovery_count;
         int bus_speed = system_bus_clock();
-        /*byte b;*/
         ide_pio_data_t  d;
 
-        switch (mode_wanted) {
-                case 8: /* set prefetch off */
-                case 9: /* set prefetch on */
-                        mode_wanted &= 1;
-                        /*set_prefetch_mode(index, mode_wanted);*/
-                        cmdprintk("%s: %sabled cmd640 prefetch\n",
-                                drive->name, mode_wanted ? "en" : "dis");
-                        return;
-        }
-
-        mode_wanted = ide_get_best_pio_mode (drive, mode_wanted, 5, &d);
-        pio_mode = d.pio_mode;
+        pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5, &d);
         cycle_time = d.cycle_time;
 
         /*
          * I copied all this complicated stuff from cmd640.c and made a few
          * minor changes.  For now I am just going to pray that it is correct.
          */
-        if (pio_mode > 5)
-                pio_mode = 5;
         setup_time  = ide_pio_timings[pio_mode].setup_time;
         active_time = ide_pio_timings[pio_mode].active_time;
         recovery_time = cycle_time - (setup_time + active_time);
@@ -320,22 +303,33 @@ static void cmd64x_tuneproc (ide_drive_t *drive, u8 mode_wanted)
         if (active_count > 16)
                 active_count = 16; /* maximum allowed by cmd646 */
 
-        /*
-         * In a perfect world, we might set the drive pio mode here
-         * (using WIN_SETFEATURE) before continuing.
-         *
-         * But we do not, because:
-         *      1) this is the wrong place to do it
-         *              (proper is do_special() in ide.c)
-         *      2) in practice this is rarely, if ever, necessary
-         */
         program_drive_counts (drive, setup_count, active_count, recovery_count);
 
-        cmdprintk("%s: selected cmd646 PIO mode%d : %d (%dns)%s, "
+        cmdprintk("%s: PIO mode wanted %d, selected %d (%dns)%s, "
                 "clocks=%d/%d/%d\n",
-                drive->name, pio_mode, mode_wanted, cycle_time,
+                drive->name, mode_wanted, pio_mode, cycle_time,
                 d.overridden ? " (overriding vendor mode)" : "",
                 setup_count, active_count, recovery_count);
+
+        return pio_mode;
+}
+
+/*
+ * Attempts to set drive's PIO mode.
+ * Special cases are 8: prefetch off, 9: prefetch on (both never worked),
+ * and 255: auto-select best mode (used at boot time).
+ */
+static void cmd64x_tune_drive (ide_drive_t *drive, u8 pio)
+{
+        /*
+         * Filter out the prefetch control values
+         * to prevent PIO5 from being programmed
+         */
+        if (pio == 8 || pio == 9)
+                return;
+
+        pio = cmd64x_tune_pio(drive, pio);
+        (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
 }
 
 static u8 cmd64x_ratemask (ide_drive_t *drive)
@@ -387,22 +381,6 @@ static u8 cmd64x_ratemask (ide_drive_t *drive)
         return mode;
 }
 
-static void config_cmd64x_chipset_for_pio (ide_drive_t *drive, u8 set_speed)
-{
-        u8 speed        = 0x00;
-        u8 set_pio      = ide_get_best_pio_mode(drive, 4, 5, NULL);
-
-        cmd64x_tuneproc(drive, set_pio);
-        speed = XFER_PIO_0 + set_pio;
-        if (set_speed)
-                (void) ide_config_drive_speed(drive, speed);
-}
-
-static void config_chipset_for_pio (ide_drive_t *drive, u8 set_speed)
-{
-        config_cmd64x_chipset_for_pio(drive, set_speed);
-}
-
 static int cmd64x_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 {
         ide_hwif_t *hwif        = HWIF(drive);
@@ -414,7 +392,7 @@ static int cmd64x_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 
         u8 speed        = ide_rate_filter(cmd64x_ratemask(drive), xferspeed);
 
-        if (speed > XFER_PIO_4) {
+        if (speed >= XFER_SW_DMA_0) {
                 (void) pci_read_config_byte(dev, pciD, &regD);
                 (void) pci_read_config_byte(dev, pciU, &regU);
                 regD &= ~(unit ? 0x40 : 0x20);
@@ -438,17 +416,20 @@ static int cmd64x_tune_chipset (ide_drive_t *drive, u8 xferspeed)
                 case XFER_SW_DMA_2:     regD |= (unit ? 0x40 : 0x10); break;
                 case XFER_SW_DMA_1:     regD |= (unit ? 0x80 : 0x20); break;
                 case XFER_SW_DMA_0:     regD |= (unit ? 0xC0 : 0x30); break;
-                case XFER_PIO_4:        cmd64x_tuneproc(drive, 4); break;
-                case XFER_PIO_3:        cmd64x_tuneproc(drive, 3); break;
-                case XFER_PIO_2:        cmd64x_tuneproc(drive, 2); break;
-                case XFER_PIO_1:        cmd64x_tuneproc(drive, 1); break;
-                case XFER_PIO_0:        cmd64x_tuneproc(drive, 0); break;
+                case XFER_PIO_5:
+                case XFER_PIO_4:
+                case XFER_PIO_3:
+                case XFER_PIO_2:
+                case XFER_PIO_1:
+                case XFER_PIO_0:
+                        (void) cmd64x_tune_pio(drive, speed - XFER_PIO_0);
+                        break;
 
                 default:
                         return 1;
         }
 
-        if (speed > XFER_PIO_4) {
+        if (speed >= XFER_SW_DMA_0) {
                 (void) pci_write_config_byte(dev, pciU, regU);
                 regD |= (unit ? 0x40 : 0x20);
                 (void) pci_write_config_byte(dev, pciD, regD);
@@ -461,8 +442,6 @@ static int config_chipset_for_dma (ide_drive_t *drive)
 {
         u8 speed        = ide_dma_speed(drive, cmd64x_ratemask(drive));
 
-        config_chipset_for_pio(drive, !speed);
-
         if (!speed)
                 return 0;
 
@@ -478,7 +457,7 @@ static int cmd64x_config_drive_for_dma (ide_drive_t *drive)
                 return 0;
 
         if (ide_use_fast_pio(drive))
-                config_chipset_for_pio(drive, 1);
+                cmd64x_tune_drive(drive, 255);
 
         return -1;
 }
@@ -679,14 +658,13 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
         pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
         class_rev &= 0xff;
 
-        hwif->tuneproc  = &cmd64x_tuneproc;
+        hwif->tuneproc  = &cmd64x_tune_drive;
         hwif->speedproc = &cmd64x_tune_chipset;
 
-        if (!hwif->dma_base) {
-                hwif->drives[0].autotune = 1;
-                hwif->drives[1].autotune = 1;
+        hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
+
+        if (!hwif->dma_base)
                 return;
-        }
 
         hwif->atapi_dma = 1;
 
diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c
index e2672fc65d30..d4b753e70119 100644
--- a/drivers/ide/pci/delkin_cb.c
+++ b/drivers/ide/pci/delkin_cb.c
@@ -122,7 +122,7 @@ static struct pci_driver driver = {
 static int
 delkin_cb_init (void)
 {
-        return pci_module_init(&driver);
+        return pci_register_driver(&driver);
 }
 
 static void
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index b408c6c517ea..f2c5a141ca10 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -21,8 +21,6 @@
  * are deemed to be part of the source code.
  */
 
-#undef REALLY_SLOW_IO           /* most systems can safely undef this */
-
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index 9ca60dd2185e..aede7eee9246 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -57,7 +57,7 @@
  * There is a 25/33MHz switch in configuration
  * register, but driver is written for use at any frequency which get
  * (use idebus=xx to select PCI bus speed).
- * Use ide0=autotune for automatical tune of the PIO modes.
+ * Use hda=autotune and hdb=autotune for automatical tune of the PIO modes.
  * If you get strange results, do not use this and set PIO manually
  * by hdparm.
  *
@@ -87,7 +87,6 @@
  * 0.5 doesn't work.
  */
 
-#undef REALLY_SLOW_IO   /* most systems can safely undef this */
 #define OPTI621_DEBUG           /* define for debug messages */
 
 #include <linux/types.h>
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 569822f4cf55..061d300ab8be 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -1,10 +1,10 @@
 /*
- *  linux/drivers/ide/pci/piix.c        Version 0.46    December 3, 2006
+ *  linux/drivers/ide/pci/piix.c        Version 0.47    February 8, 2007
  *
  *  Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
  *  Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
  *  Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
- *  Copyright (C) 2006 MontaVista Software, Inc. <source@mvista.com>
+ *  Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
  *
  *  May be copied or modified under the terms of the GNU General Public License
  *
@@ -205,14 +205,13 @@ static u8 piix_dma_2_pio (u8 xfer_rate) {
 }
 
 /**
- *      piix_tune_drive         -       tune a drive attached to a PIIX
+ *      piix_tune_pio           -       tune PIIX for PIO mode
  *      @drive: drive to tune
  *      @pio: desired PIO mode
  *
- *      Set the interface PIO mode based upon  the settings done by AMI BIOS
- *      (might be useful if drive is not registered in CMOS for any reason).
+ *      Set the interface PIO mode based upon the settings done by AMI BIOS.
  */
-static void piix_tune_drive (ide_drive_t *drive, u8 pio)
+static void piix_tune_pio (ide_drive_t *drive, u8 pio)
 {
         ide_hwif_t *hwif        = HWIF(drive);
         struct pci_dev *dev     = hwif->pci_dev;
@@ -233,8 +232,6 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio)
                                         { 2, 1 },
                                         { 2, 3 }, };
 
-        pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
-
         /*
          * Master vs slave is synchronized above us but the slave register is
          * shared by the two hwifs so the corner case of two slave timeouts in
@@ -253,19 +250,20 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio)
                 master_data |=  0x4000;
                 master_data &= ~0x0070;
                 if (pio > 1) {
-                        /* enable PPE, IE and TIME */
-                        master_data = master_data | (control << 4);
+                        /* Set PPE, IE and TIME */
+                        master_data |= control << 4;
                 }
                 pci_read_config_byte(dev, slave_port, &slave_data);
-                slave_data = slave_data & (hwif->channel ? 0x0f : 0xf0);
-                slave_data = slave_data | (((timings[pio][0] << 2) | timings[pio][1]) << (hwif->channel ? 4 : 0));
+                slave_data &= hwif->channel ? 0x0f : 0xf0;
+                slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) <<
+                               (hwif->channel ? 4 : 0);
         } else {
                 master_data &= ~0x3307;
                 if (pio > 1) {
                         /* enable PPE, IE and TIME */
-                        master_data = master_data | control;
+                        master_data |= control;
                 }
-                master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8);
+                master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
         }
         pci_write_config_word(dev, master_port, master_data);
         if (is_slave)
@@ -274,6 +272,21 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio)
 }
 
 /**
+ *      piix_tune_drive         -       tune a drive attached to PIIX
+ *      @drive: drive to tune
+ *      @pio: desired PIO mode
+ *
+ *      Set the drive's PIO mode (might be useful if drive is not registered
+ *      in CMOS for any reason).
+ */
+static void piix_tune_drive (ide_drive_t *drive, u8 pio)
+{
+        pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+        piix_tune_pio(drive, pio);
+        (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
+}
+
+/**
  *      piix_tune_chipset       -       tune a PIIX interface
  *      @drive: IDE drive to tune
  *      @xferspeed: speed to configure
@@ -348,8 +361,8 @@ static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed)
                         pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
         }
 
-        piix_tune_drive(drive, piix_dma_2_pio(speed));
-        return (ide_config_drive_speed(drive, speed));
+        piix_tune_pio(drive, piix_dma_2_pio(speed));
+        return ide_config_drive_speed(drive, speed);
 }
 
 /**
@@ -392,9 +405,7 @@ static int piix_config_drive_xfer_rate (ide_drive_t *drive)
                 return 0;
 
         if (ide_use_fast_pio(drive))
-                /* Find best PIO mode. */
-                piix_tune_chipset(drive, XFER_PIO_0 +
-                                  ide_get_best_pio_mode(drive, 255, 4, NULL));
+                piix_tune_drive(drive, 255);
 
         return -1;
 }
diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c
index c1855311052b..f8c954690142 100644
--- a/drivers/ide/pci/rz1000.c
+++ b/drivers/ide/pci/rz1000.c
@@ -15,8 +15,6 @@
  *  Dunno if this fixes both ports, or only the primary port (?).
  */
 
-#undef REALLY_SLOW_IO           /* most systems can safely undef this */
-
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 7b4c189a9d99..71eccdf5f817 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -26,6 +26,11 @@
  *      If you have strange problems with nVidia chipset systems please
  *      see the SI support documentation and update your system BIOS
  *      if neccessary
+ *
+ *  The Dell DRAC4 has some interesting features including effectively hot
+ *  unplugging/replugging the virtual CD interface when the DRAC is reset.
+ *  This often causes drivers/ide/siimage to panic but is ok with the rather
+ *  smarter code in libata.
  */
 
 #include <linux/types.h>
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index ae7eb58d961c..852ccb36da1d 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -1,8 +1,8 @@
 /*
- *  linux/drivers/ide/pci/slc90e66.c    Version 0.13    December 30, 2006
+ *  linux/drivers/ide/pci/slc90e66.c    Version 0.14    February 8, 2007
  *
  *  Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
- *  Copyright (C) 2006 MontaVista Software, Inc. <source@mvista.com>
+ *  Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
  *
  * This is a look-alike variation of the ICH0 PIIX4 Ultra-66,
  * but this keeps the ISA-Bridge and slots alive.
@@ -57,11 +57,7 @@ static u8 slc90e66_dma_2_pio (u8 xfer_rate) {
         }
 }
 
-/*
- *  Based on settings done by AMI BIOS
- *  (might be useful if drive is not registered in CMOS for any reason).
- */
-static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
+static void slc90e66_tune_pio (ide_drive_t *drive, u8 pio)
 {
         ide_hwif_t *hwif        = HWIF(drive);
         struct pci_dev *dev     = hwif->pci_dev;
@@ -80,7 +76,6 @@ static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
                                         { 2, 1 },
                                         { 2, 3 }, };
 
-        pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
         spin_lock_irqsave(&ide_lock, flags);
         pci_read_config_word(dev, master_port, &master_data);
 
@@ -94,19 +89,20 @@ static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
                 master_data |=  0x4000;
                 master_data &= ~0x0070;
                 if (pio > 1) {
-                        /* enable PPE, IE and TIME */
-                        master_data = master_data | (control << 4);
+                        /* Set PPE, IE and TIME */
+                        master_data |= control << 4;
                 }
                 pci_read_config_byte(dev, slave_port, &slave_data);
-                slave_data = slave_data & (hwif->channel ? 0x0f : 0xf0);
-                slave_data = slave_data | (((timings[pio][0] << 2) | timings[pio][1]) << (hwif->channel ? 4 : 0));
+                slave_data &= hwif->channel ? 0x0f : 0xf0;
+                slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) <<
+                               (hwif->channel ? 4 : 0);
         } else {
                 master_data &= ~0x3307;
                 if (pio > 1) {
                         /* enable PPE, IE and TIME */
-                        master_data = master_data | control;
+                        master_data |= control;
                 }
-                master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8);
+                master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
         }
         pci_write_config_word(dev, master_port, master_data);
         if (is_slave)
@@ -114,6 +110,13 @@ static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
         spin_unlock_irqrestore(&ide_lock, flags);
 }
 
+static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
+{
+        pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+        slc90e66_tune_pio(drive, pio);
+        (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
+}
+
 static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 {
         ide_hwif_t *hwif        = HWIF(drive);
@@ -162,8 +165,8 @@ static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed)
                         pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
         }
 
-        slc90e66_tune_drive(drive, slc90e66_dma_2_pio(speed));
-        return (ide_config_drive_speed(drive, speed));
+        slc90e66_tune_pio(drive, slc90e66_dma_2_pio(speed));
+        return ide_config_drive_speed(drive, speed);
 }
 
 static int slc90e66_config_drive_for_dma (ide_drive_t *drive)
@@ -185,8 +188,7 @@ static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive)
                 return 0;
 
         if (ide_use_fast_pio(drive))
-                (void)slc90e66_tune_chipset(drive, XFER_PIO_0 +
-                                ide_get_best_pio_mode(drive, 255, 4, NULL));
+                slc90e66_tune_drive(drive, 255);
 
         return -1;
 }