17 files changed, 37 insertions, 46 deletions

diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index f6dc6c20f3af..e0c8fe7d9fea 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -140,7 +140,7 @@ static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio)
         drive->hwif->port_ops->set_dma_mode(drive, pio + XFER_PIO_0);
 }
 
-static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev)
 {
         /* These are necessary to get AEC6280 Macintosh cards to work */
         if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index a099c4dd599d..b582687e0cd4 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -209,13 +209,12 @@ static int ali15x3_dma_setup(ide_drive_t *drive)
 /**
  *      init_chipset_ali15x3    -       Initialise an ALi IDE controller
  *      @dev: PCI device
- *      @name: Name of the controller
  *
  *      This function initializes the ALI IDE controller and where 
  *      appropriate also sets up the 1533 southbridge.
  */
-  
-static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const char *name)
+
+static unsigned int __devinit init_chipset_ali15x3(struct pci_dev *dev)
 {
         unsigned long flags;
         u8 tmpbyte;
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index cbf78edfe00b..2cea7bf51a0f 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -112,15 +112,13 @@ static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio)
         amd_set_drive(drive, XFER_PIO_0 + pio);
 }
 
-static void __devinit amd7409_cable_detect(struct pci_dev *dev,
-                                           const char *name)
+static void __devinit amd7409_cable_detect(struct pci_dev *dev)
 {
         /* no host side cable detection */
         amd_80w = 0x03;
 }
 
-static void __devinit amd7411_cable_detect(struct pci_dev *dev,
-                                           const char *name)
+static void __devinit amd7411_cable_detect(struct pci_dev *dev)
 {
         int i;
         u32 u = 0;
@@ -131,9 +129,9 @@ static void __devinit amd7411_cable_detect(struct pci_dev *dev,
         amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
         for (i = 24; i >= 0; i -= 8)
                 if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
-                        printk(KERN_WARNING "%s %s: BIOS didn't set cable bits "
-                                "correctly. Enabling workaround.\n",
-                                name, pci_name(dev));
+                        printk(KERN_WARNING DRV_NAME " %s: BIOS didn't set "
+                                "cable bits correctly. Enabling workaround.\n",
+                                pci_name(dev));
                         amd_80w |= (1 << (1 - (i >> 4)));
                 }
 }
@@ -142,8 +140,7 @@ static void __devinit amd7411_cable_detect(struct pci_dev *dev,
  * The initialization callback.  Initialize drive independent registers.
  */
 
-static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev,
-                                                   const char *name)
+static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev)
 {
         u8 t = 0, offset = amd_offset(dev);
 
@@ -156,9 +153,9 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev,
                 ; /* no UDMA > 2 */
         else if (dev->vendor == PCI_VENDOR_ID_AMD &&
                  dev->device == PCI_DEVICE_ID_AMD_VIPER_7409)
-                amd7409_cable_detect(dev, name);
+                amd7409_cable_detect(dev);
         else
-                amd7411_cable_detect(dev, name);
+                amd7411_cable_detect(dev);
 
 /*
  * Take care of prefetch & postwrite.
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 3d84debaf81f..1360b4fa9fd3 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -332,7 +332,7 @@ static int cmd646_1_dma_end(ide_drive_t *drive)
         return (dma_stat & 7) != 4;
 }
 
-static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev)
 {
         u8 mrdmode = 0;
 
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index 5543c8677a5a..f235db8c678b 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -129,12 +129,11 @@ static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode)
 /**
  *      init_chipset_5530       -       set up 5530 bridge
  *      @dev: PCI device
- *      @name: device name
  *
  *      Initialize the cs5530 bridge for reliable IDE DMA operation.
  */
 
-static unsigned int __devinit init_chipset_cs5530 (struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_cs5530(struct pci_dev *dev)
 {
         struct pci_dev *master_0 = NULL, *cs5530_0 = NULL;
 
@@ -153,11 +152,11 @@ static unsigned int __devinit init_chipset_cs5530 (struct pci_dev *dev, const ch
                 }
         }
         if (!master_0) {
-                printk(KERN_ERR "%s: unable to locate PCI MASTER function\n", name);
+                printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n");
                 goto out;
         }
         if (!cs5530_0) {
-                printk(KERN_ERR "%s: unable to locate CS5530 LEGACY function\n", name);
+                printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n");
                 goto out;
         }
 
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index 41c7f3351eb6..bfae2f882f48 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -332,7 +332,7 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
 /*
  * this function is called during init and is used to setup the cy82c693 chip
  */
-static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev)
 {
         if (PCI_FUNC(dev->devfn) != 1)
                 return 0;
@@ -351,8 +351,8 @@ static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev, const c
         data = inb(CY82_DATA_PORT);
 
 #if CY82C693_DEBUG_INFO
-        printk(KERN_INFO "%s: Peripheral Configuration Register: 0x%X\n",
-                name, data);
+        printk(KERN_INFO DRV_NAME ": Peripheral Configuration Register: 0x%X\n",
+                data);
 #endif /* CY82C693_DEBUG_INFO */
 
         /*
@@ -373,8 +373,8 @@ static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev, const c
         outb(data, CY82_DATA_PORT);
 
 #if CY82C693_DEBUG_INFO
-        printk(KERN_INFO "%s: New Peripheral Configuration Register: 0x%X\n",
-                name, data);
+        printk(KERN_INFO ": New Peripheral Configuration Register: 0x%X\n",
+                data);
 #endif /* CY82C693_DEBUG_INFO */
 
 #endif /* CY82C693_SETDMA_CLOCK */
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c
index baabb4ce0d78..6009b0b9655d 100644
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -79,7 +79,7 @@ static void hpt34x_set_pio_mode(ide_drive_t *drive, const u8 pio)
  */
 #define HPT34X_PCI_INIT_REG             0x80
 
-static unsigned int __devinit init_chipset_hpt34x(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_hpt34x(struct pci_dev *dev)
 {
         int i = 0;
         unsigned long hpt34xIoBase = pci_resource_start(dev, 4);
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 6a1c65c3be3e..5271b246b88c 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -970,11 +970,12 @@ static int __devinit hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f
         return 1;
 }
 
-static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
 {
         unsigned long io_base   = pci_resource_start(dev, 4);
         struct ide_host *host   = pci_get_drvdata(dev);
         struct hpt_info *info   = host->host_priv + (&dev->dev == host->dev[1]);
+        const char *name        = DRV_NAME;
         u8 pci_clk,  dpll_clk   = 0;    /* PCI and DPLL clock in MHz */
         u8 chip_type;
         enum ata_clock  clock;
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 74173352741f..e16a1d113a2a 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -605,7 +605,7 @@ static void __devinit it8212_disable_raid(struct pci_dev *dev)
         pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
 }
 
-static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev)
 {
         u8 conf;
         static char *mode[2] = { "pass through", "smart" };
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 1f6791957227..998615fa285f 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -326,8 +326,9 @@ static void __devinit apple_kiwi_init(struct pci_dev *pdev)
 }
 #endif /* CONFIG_PPC_PMAC */
 
-static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev)
 {
+        const char *name = DRV_NAME;
         unsigned long dma_base = pci_resource_start(dev, 4);
         unsigned long sec_dma_base = dma_base + 0x08;
         long pll_input, pll_output, ratio;
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index da92d127868f..6ff2def58da0 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -265,8 +265,7 @@ static void pdc202xx_dma_timeout(ide_drive_t *drive)
         ide_dma_timeout(drive);
 }
 
-static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev,
-                                                    const char *name)
+static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev)
 {
         unsigned long dmabase = pci_resource_start(dev, 4);
         u8 udma_speed_flag = 0, primary_mode = 0, secondary_mode = 0;
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 9eb411f5c358..7fc3022dcf68 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -200,13 +200,12 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
 /**
  *      init_chipset_ich        -       set up the ICH chipset
  *      @dev: PCI device to set up
- *      @name: Name of the device
  *
  *      Initialize the PCI device as required.  For the ICH this turns
  *      out to be nice and simple.
  */
 
-static unsigned int __devinit init_chipset_ich(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_ich(struct pci_dev *dev)
 {
         u32 extra = 0;
 
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index e26bc8326dbb..d173f2937722 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -174,7 +174,7 @@ static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed)
         pci_write_config_byte(dev, 0x54, ultra_enable);
 }
 
-static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_svwks(struct pci_dev *dev)
 {
         unsigned int reg;
         u8 btr;
@@ -190,8 +190,8 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha
                         pci_read_config_dword(isa_dev, 0x64, &reg);
                         reg &= ~0x00002000; /* disable 600ns interrupt mask */
                         if(!(reg & 0x00004000))
-                                printk(KERN_DEBUG "%s %s: UDMA not BIOS "
-                                        "enabled.\n", name, pci_name(dev));
+                                printk(KERN_DEBUG DRV_NAME " %s: UDMA not BIOS "
+                                        "enabled.\n", pci_name(dev));
                         reg |=  0x00004000; /* enable UDMA/33 support */
                         pci_write_config_dword(isa_dev, 0x64, reg);
                 }
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 572b479a3922..b8ad9ad6cf0d 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -457,14 +457,12 @@ static void sil_sata_pre_reset(ide_drive_t *drive)
 /**
  *      init_chipset_siimage    -       set up an SI device
  *      @dev: PCI device
- *      @name: device name
  *
  *      Perform the initial PCI set up for this device. Attempt to switch
  *      to 133 MHz clocking if the system isn't already set up to do it.
  */
 
-static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev,
-                                                   const char *name)
+static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev)
 {
         struct ide_host *host = pci_get_drvdata(dev);
         void __iomem *ioaddr = host->host_priv;
@@ -541,8 +539,8 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev,
                         { "== 100", "== 133", "== 2X PCI", "DISABLED!" };
 
                 tmp >>= 4;
-                printk(KERN_INFO "%s %s: BASE CLOCK %s\n",
-                        name, pci_name(dev), clk_str[tmp & 3]);
+                printk(KERN_INFO DRV_NAME " %s: BASE CLOCK %s\n",
+                        pci_name(dev), clk_str[tmp & 3]);
         }
 
         return 0;
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 6fcb46c87871..cc95f90b53b7 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -448,8 +448,7 @@ static int __devinit sis_find_family(struct pci_dev *dev)
         return chipset_family;
 }
 
-static unsigned int __devinit init_chipset_sis5513(struct pci_dev *dev,
-                                                   const char *name)
+static unsigned int __devinit init_chipset_sis5513(struct pci_dev *dev)
 {
         /* Make general config ops here
            1/ tell IDE channels to operate in Compatibility mode only
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index fa720db3de10..73905bcc08fb 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -272,7 +272,7 @@ static u8 sl82c105_bridge_revision(struct pci_dev *dev)
  * channel 0 here at least, but channel 1 has to be enabled by
  * firmware or arch code. We still set both to 16 bits mode.
  */
-static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const char *msg)
+static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev)
 {
         u32 val;
 
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index 170e058f1fbd..454d2bf62dce 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -262,13 +262,12 @@ static void __devinit via_cable_detect(struct via82cxxx_dev *vdev, u32 u)
 /**
  *      init_chipset_via82cxxx  -       initialization handler
  *      @dev: PCI device
- *      @name: Name of interface
  *
  *      The initialization callback. Here we determine the IDE chip type
  *      and initialize its drive independent registers.
  */
 
-static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev)
 {
         struct ide_host *host = pci_get_drvdata(dev);
         struct via82cxxx_dev *vdev = host->host_priv;