1 files changed, 45 insertions, 33 deletions

diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index d90b42917775..3f35386d9cad 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -305,11 +305,52 @@ static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio)
         sis_program_timings(drive, XFER_PIO_0 + pio);
 }
 
-static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode)
 {
-        ide_hwif_t *hwif        = HWIF(drive);
-        struct pci_dev *dev     = hwif->pci_dev;
+        struct pci_dev *dev = drive->hwif->pci_dev;
+        u32 regdw = 0;
+        u8 drive_pci = sis_ata133_get_base(drive), clk, idx;
+
+        pci_read_config_dword(dev, drive_pci, &regdw);
+
+        regdw |= 0x04;
+        regdw &= 0xfffff00f;
+        /* check if ATA133 enable */
+        clk = (regdw & 0x08) ? ATA_133 : ATA_100;
+        idx = mode - XFER_UDMA_0;
+        regdw |= cycle_time_value[clk][idx] << 4;
+        regdw |= cvs_time_value[clk][idx] << 8;
+
+        pci_write_config_dword(dev, drive_pci, regdw);
+}
+
+static void sis_ata33_program_udma_timings(ide_drive_t *drive, const u8 mode)
+{
+        struct pci_dev *dev = drive->hwif->pci_dev;
+        u8 drive_pci = 0x40 + drive->dn * 2, reg = 0, i = chipset_family;
+
+        pci_read_config_byte(dev, drive_pci + 1, &reg);
 
+        /* force the UDMA bit on if we want to use UDMA */
+        reg |= 0x80;
+        /* clean reg cycle time bits */
+        reg &= ~((0xff >> (8 - cycle_time_range[i])) << cycle_time_offset[i]);
+        /* set reg cycle time bits */
+        reg |= cycle_time_value[i][mode - XFER_UDMA_0] << cycle_time_offset[i];
+
+        pci_write_config_byte(dev, drive_pci + 1, reg);
+}
+
+static void sis_program_udma_timings(ide_drive_t *drive, const u8 mode)
+{
+        if (chipset_family >= ATA_133)  /* ATA_133 */
+                sis_ata133_program_udma_timings(drive, mode);
+        else                            /* ATA_33/66/100a/100/133a */
+                sis_ata33_program_udma_timings(drive, mode);
+}
+
+static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
+{
         /* Config chip for mode */
         switch(speed) {
                 case XFER_UDMA_6:
@@ -319,36 +360,7 @@ static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
                 case XFER_UDMA_2:
                 case XFER_UDMA_1:
                 case XFER_UDMA_0:
-                        if (chipset_family >= ATA_133) {
-                                u32 regdw = 0;
-                                u8 drive_pci = sis_ata133_get_base(drive);
-
-                                pci_read_config_dword(dev, drive_pci, &regdw);
-                                regdw |= 0x04;
-                                regdw &= 0xfffff00f;
-                                /* check if ATA133 enable */
-                                if (regdw & 0x08) {
-                                        regdw |= (unsigned long)cycle_time_value[ATA_133][speed-XFER_UDMA_0] << 4;
-                                        regdw |= (unsigned long)cvs_time_value[ATA_133][speed-XFER_UDMA_0] << 8;
-                                } else {
-                                        regdw |= (unsigned long)cycle_time_value[ATA_100][speed-XFER_UDMA_0] << 4;
-                                        regdw |= (unsigned long)cvs_time_value[ATA_100][speed-XFER_UDMA_0] << 8;
-                                }
-                                pci_write_config_dword(dev, (unsigned long)drive_pci, regdw);
-                        } else {
-                                u8 drive_pci = 0x40 + drive->dn * 2, reg = 0;
-
-                                pci_read_config_byte(dev, drive_pci+1, &reg);
-                                /* Force the UDMA bit on if we want to use UDMA */
-                                reg |= 0x80;
-                                /* clean reg cycle time bits */
-                                reg &= ~((0xFF >> (8 - cycle_time_range[chipset_family]))
-                                         << cycle_time_offset[chipset_family]);
-                                /* set reg cycle time bits */
-                                reg |= cycle_time_value[chipset_family][speed-XFER_UDMA_0]
-                                        << cycle_time_offset[chipset_family];
-                                pci_write_config_byte(dev, drive_pci+1, reg);
-                        }
+                        sis_program_udma_timings(drive, speed);
                         break;
                 case XFER_MW_DMA_2:
                 case XFER_MW_DMA_1: