1 files changed, 14 insertions, 32 deletions

diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index 8c715b7a85db..725c80508d90 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -90,16 +90,6 @@
 
 #include <asm/io.h>
 
-//#define OPTI621_MAX_PIO 3
-/* In fact, I do not have any PIO 4 drive
- * (address: 25 ns, data: 70 ns, recovery: 35 ns),
- * but OPTi 82C621 is programmable and it can do (minimal values):
- * on 40MHz PCI bus (pulse 25 ns):
- *  address: 25 ns, data: 25 ns, recovery: 50 ns;
- * on 20MHz PCI bus (pulse 50 ns):
- *  address: 50 ns, data: 50 ns, recovery: 100 ns.
- */
-
 #define READ_REG 0      /* index of Read cycle timing register */
 #define WRITE_REG 1     /* index of Write cycle timing register */
 #define CNTRL_REG 3     /* index of Control register */
@@ -150,13 +140,13 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
         u8 tim, misc, addr_pio = pio, clk;
 
         /* DRDY is default 2 (by OPTi Databook) */
-        static const u8 addr_timings[2][4] = {
-                { 0x20, 0x10, 0x00, 0x00 },     /* 33 MHz */
-                { 0x10, 0x10, 0x00, 0x00 },     /* 25 MHz */
+        static const u8 addr_timings[2][5] = {
+                { 0x20, 0x10, 0x00, 0x00, 0x00 },       /* 33 MHz */
+                { 0x10, 0x10, 0x00, 0x00, 0x00 },       /* 25 MHz */
         };
-        static const u8 data_rec_timings[2][4] = {
-                { 0x5b, 0x45, 0x32, 0x21 },     /* 33 MHz */
-                { 0x48, 0x34, 0x21, 0x10 }      /* 25 MHz */
+        static const u8 data_rec_timings[2][5] = {
+                { 0x5b, 0x45, 0x32, 0x21, 0x20 },       /* 33 MHz */
+                { 0x48, 0x34, 0x21, 0x10, 0x10 }        /* 25 MHz */
         };
 
         drive->drive_data = XFER_PIO_0 + pio;
@@ -209,30 +199,22 @@ static const struct ide_port_ops opti621_port_ops = {
         .set_pio_mode           = opti621_set_pio_mode,
 };
 
-static const struct ide_port_info opti621_chipsets[] __devinitdata = {
-        {       /* 0 */
-                .name           = "OPTI621",
-                .enablebits     = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
-                .port_ops       = &opti621_port_ops,
-                .host_flags     = IDE_HFLAG_NO_DMA,
-                .pio_mask       = ATA_PIO3,
-        }, {    /* 1 */
-                .name           = "OPTI621X",
-                .enablebits     = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
-                .port_ops       = &opti621_port_ops,
-                .host_flags     = IDE_HFLAG_NO_DMA,
-                .pio_mask       = ATA_PIO3,
-        }
+static const struct ide_port_info opti621_chipset __devinitdata = {
+        .name           = "OPTI621/X",
+        .enablebits     = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
+        .port_ops       = &opti621_port_ops,
+        .host_flags     = IDE_HFLAG_NO_DMA,
+        .pio_mask       = ATA_PIO4,
 };
 
 static int __devinit opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-        return ide_setup_pci_device(dev, &opti621_chipsets[id->driver_data]);
+        return ide_setup_pci_device(dev, &opti621_chipset);
 }
 
 static const struct pci_device_id opti621_pci_tbl[] = {
         { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C621), 0 },
-        { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 1 },
+        { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 0 },
         { 0, },
 };
 MODULE_DEVICE_TABLE(pci, opti621_pci_tbl);