1 files changed, 17 insertions, 59 deletions

diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 26c27d946c67..76643b626bdd 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -378,74 +378,31 @@ static void ali15x3_tune_drive (ide_drive_t *drive, u8 pio)
 }
 
 /**
- *      ali15x3_can_ultra       -       check for ultra DMA support
- *      @drive: drive to do the check
+ *      ali_udma_filter         -       compute UDMA mask
+ *      @drive: IDE device
  *
- *      Check the drive and controller revisions. Return 0 if UDMA is
- *      not available, or 1 if UDMA can be used. The actual rules for
- *      the ALi are
+ *      Return available UDMA modes.
+ *
+ *      The actual rules for the ALi are:
  *              No UDMA on revisions <= 0x20
  *              Disk only for revisions < 0xC2
  *              Not WDC drives for revisions < 0xC2
  *
  *      FIXME: WDC ifdef needs to die
  */
- 
-static u8 ali15x3_can_ultra (ide_drive_t *drive)
-{
-#ifndef CONFIG_WDC_ALI15X3
-        struct hd_driveid *id   = drive->id;
-#endif /* CONFIG_WDC_ALI15X3 */
-
-        if (m5229_revision <= 0x20) {
-                return 0;
-        } else if ((m5229_revision < 0xC2) &&
-#ifndef CONFIG_WDC_ALI15X3
-                   ((chip_is_1543c_e && strstr(id->model, "WDC ")) ||
-                    (drive->media!=ide_disk))) {
-#else /* CONFIG_WDC_ALI15X3 */
-                   (drive->media!=ide_disk)) {
-#endif /* CONFIG_WDC_ALI15X3 */
-                return 0;
-        } else {
-                return 1;
-        }
-}
 
-/**
- *      ali15x3_ratemask        -       generate DMA mode list
- *      @drive: drive to compute against
- *
- *      Generate a list of the available DMA modes for the drive. 
- *      FIXME: this function contains lots of bogus masking we can dump
- *
- *      Return the highest available mode (UDMA33, UDMA66, UDMA100,..)
- */
- 
-static u8 ali15x3_ratemask (ide_drive_t *drive)
+static u8 ali_udma_filter(ide_drive_t *drive)
 {
-        u8 mode = 0, can_ultra  = ali15x3_can_ultra(drive);
-
-        if (m5229_revision > 0xC4 && can_ultra) {
-                mode = 4;
-        } else if (m5229_revision == 0xC4 && can_ultra) {
-                mode = 3;
-        } else if (m5229_revision >= 0xC2 && can_ultra) {
-                mode = 2;
-        } else if (can_ultra) {
-                return 1;
-        } else {
-                return 0;
+        if (m5229_revision > 0x20 && m5229_revision < 0xC2) {
+                if (drive->media != ide_disk)
+                        return 0;
+#ifndef CONFIG_WDC_ALI15X3
+                if (chip_is_1543c_e && strstr(drive->id->model, "WDC "))
+                        return 0;
+#endif
         }
 
-        /*
-         *      If the drive sees no suitable cable then UDMA 33
-         *      is the highest permitted mode
-         */
-         
-        if (!eighty_ninty_three(drive))
-                mode = min(mode, (u8)1);
-        return mode;
+        return drive->hwif->ultra_mask;
 }
 
 /**
@@ -461,7 +418,7 @@ static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 {
         ide_hwif_t *hwif        = HWIF(drive);
         struct pci_dev *dev     = hwif->pci_dev;
-        u8 speed                = ide_rate_filter(ali15x3_ratemask(drive), xferspeed);
+        u8 speed                = ide_rate_filter(drive, xferspeed);
         u8 speed1               = speed;
         u8 unit                 = (drive->select.b.unit & 0x01);
         u8 tmpbyte              = 0x00;
@@ -511,7 +468,7 @@ static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed)
  
 static int config_chipset_for_dma (ide_drive_t *drive)
 {
-        u8 speed = ide_dma_speed(drive, ali15x3_ratemask(drive));
+        u8 speed = ide_max_dma_mode(drive);
 
         if (!(speed))
                 return 0;
@@ -771,6 +728,7 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
         hwif->autodma = 0;
         hwif->tuneproc = &ali15x3_tune_drive;
         hwif->speedproc = &ali15x3_tune_chipset;
+        hwif->udma_filter = &ali_udma_filter;
 
         /* don't use LBA48 DMA on ALi devices before rev 0xC5 */
         hwif->no_lba48_dma = (m5229_revision <= 0xC4) ? 1 : 0;