diff options
Diffstat (limited to 'drivers/ide/palm_bk3710.c')
-rw-r--r-- | drivers/ide/palm_bk3710.c | 424 |
1 files changed, 424 insertions, 0 deletions
diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c new file mode 100644 index 000000000000..122ed3c072fd --- /dev/null +++ b/drivers/ide/palm_bk3710.c | |||
@@ -0,0 +1,424 @@ | |||
1 | /* | ||
2 | * Palmchip bk3710 IDE controller | ||
3 | * | ||
4 | * Copyright (C) 2006 Texas Instruments. | ||
5 | * Copyright (C) 2007 MontaVista Software, Inc., <source@mvista.com> | ||
6 | * | ||
7 | * ---------------------------------------------------------------------------- | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify | ||
10 | * it under the terms of the GNU General Public License as published by | ||
11 | * the Free Software Foundation; either version 2 of the License, or | ||
12 | * (at your option) any later version. | ||
13 | * | ||
14 | * This program is distributed in the hope that it will be useful, | ||
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
17 | * GNU General Public License for more details. | ||
18 | * | ||
19 | * You should have received a copy of the GNU General Public License | ||
20 | * along with this program; if not, write to the Free Software | ||
21 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | ||
22 | * ---------------------------------------------------------------------------- | ||
23 | * | ||
24 | */ | ||
25 | |||
26 | #include <linux/types.h> | ||
27 | #include <linux/module.h> | ||
28 | #include <linux/kernel.h> | ||
29 | #include <linux/ioport.h> | ||
30 | #include <linux/ide.h> | ||
31 | #include <linux/delay.h> | ||
32 | #include <linux/init.h> | ||
33 | #include <linux/clk.h> | ||
34 | #include <linux/platform_device.h> | ||
35 | |||
36 | /* Offset of the primary interface registers */ | ||
37 | #define IDE_PALM_ATA_PRI_REG_OFFSET 0x1F0 | ||
38 | |||
39 | /* Primary Control Offset */ | ||
40 | #define IDE_PALM_ATA_PRI_CTL_OFFSET 0x3F6 | ||
41 | |||
42 | /* | ||
43 | * PalmChip 3710 IDE Controller UDMA timing structure Definition | ||
44 | */ | ||
45 | struct palm_bk3710_udmatiming { | ||
46 | unsigned int rptime; /* Ready to pause time */ | ||
47 | unsigned int cycletime; /* Cycle Time */ | ||
48 | }; | ||
49 | |||
50 | #define BK3710_BMICP 0x00 | ||
51 | #define BK3710_BMISP 0x02 | ||
52 | #define BK3710_BMIDTP 0x04 | ||
53 | #define BK3710_BMICS 0x08 | ||
54 | #define BK3710_BMISS 0x0A | ||
55 | #define BK3710_BMIDTS 0x0C | ||
56 | #define BK3710_IDETIMP 0x40 | ||
57 | #define BK3710_IDETIMS 0x42 | ||
58 | #define BK3710_SIDETIM 0x44 | ||
59 | #define BK3710_SLEWCTL 0x45 | ||
60 | #define BK3710_IDESTATUS 0x47 | ||
61 | #define BK3710_UDMACTL 0x48 | ||
62 | #define BK3710_UDMATIM 0x4A | ||
63 | #define BK3710_MISCCTL 0x50 | ||
64 | #define BK3710_REGSTB 0x54 | ||
65 | #define BK3710_REGRCVR 0x58 | ||
66 | #define BK3710_DATSTB 0x5C | ||
67 | #define BK3710_DATRCVR 0x60 | ||
68 | #define BK3710_DMASTB 0x64 | ||
69 | #define BK3710_DMARCVR 0x68 | ||
70 | #define BK3710_UDMASTB 0x6C | ||
71 | #define BK3710_UDMATRP 0x70 | ||
72 | #define BK3710_UDMAENV 0x74 | ||
73 | #define BK3710_IORDYTMP 0x78 | ||
74 | #define BK3710_IORDYTMS 0x7C | ||
75 | |||
76 | static unsigned ideclk_period; /* in nanoseconds */ | ||
77 | |||
78 | static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = { | ||
79 | {160, 240}, /* UDMA Mode 0 */ | ||
80 | {125, 160}, /* UDMA Mode 1 */ | ||
81 | {100, 120}, /* UDMA Mode 2 */ | ||
82 | {100, 90}, /* UDMA Mode 3 */ | ||
83 | {100, 60}, /* UDMA Mode 4 */ | ||
84 | {85, 40}, /* UDMA Mode 5 */ | ||
85 | }; | ||
86 | |||
87 | static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev, | ||
88 | unsigned int mode) | ||
89 | { | ||
90 | u8 tenv, trp, t0; | ||
91 | u32 val32; | ||
92 | u16 val16; | ||
93 | |||
94 | /* DMA Data Setup */ | ||
95 | t0 = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].cycletime, | ||
96 | ideclk_period) - 1; | ||
97 | tenv = DIV_ROUND_UP(20, ideclk_period) - 1; | ||
98 | trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime, | ||
99 | ideclk_period) - 1; | ||
100 | |||
101 | /* udmatim Register */ | ||
102 | val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0); | ||
103 | val16 |= (mode << (dev ? 4 : 0)); | ||
104 | writew(val16, base + BK3710_UDMATIM); | ||
105 | |||
106 | /* udmastb Ultra DMA Access Strobe Width */ | ||
107 | val32 = readl(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8)); | ||
108 | val32 |= (t0 << (dev ? 8 : 0)); | ||
109 | writel(val32, base + BK3710_UDMASTB); | ||
110 | |||
111 | /* udmatrp Ultra DMA Ready to Pause Time */ | ||
112 | val32 = readl(base + BK3710_UDMATRP) & (0xFF << (dev ? 0 : 8)); | ||
113 | val32 |= (trp << (dev ? 8 : 0)); | ||
114 | writel(val32, base + BK3710_UDMATRP); | ||
115 | |||
116 | /* udmaenv Ultra DMA envelop Time */ | ||
117 | val32 = readl(base + BK3710_UDMAENV) & (0xFF << (dev ? 0 : 8)); | ||
118 | val32 |= (tenv << (dev ? 8 : 0)); | ||
119 | writel(val32, base + BK3710_UDMAENV); | ||
120 | |||
121 | /* Enable UDMA for Device */ | ||
122 | val16 = readw(base + BK3710_UDMACTL) | (1 << dev); | ||
123 | writew(val16, base + BK3710_UDMACTL); | ||
124 | } | ||
125 | |||
126 | static void palm_bk3710_setdmamode(void __iomem *base, unsigned int dev, | ||
127 | unsigned short min_cycle, | ||
128 | unsigned int mode) | ||
129 | { | ||
130 | u8 td, tkw, t0; | ||
131 | u32 val32; | ||
132 | u16 val16; | ||
133 | struct ide_timing *t; | ||
134 | int cycletime; | ||
135 | |||
136 | t = ide_timing_find_mode(mode); | ||
137 | cycletime = max_t(int, t->cycle, min_cycle); | ||
138 | |||
139 | /* DMA Data Setup */ | ||
140 | t0 = DIV_ROUND_UP(cycletime, ideclk_period); | ||
141 | td = DIV_ROUND_UP(t->active, ideclk_period); | ||
142 | tkw = t0 - td - 1; | ||
143 | td -= 1; | ||
144 | |||
145 | val32 = readl(base + BK3710_DMASTB) & (0xFF << (dev ? 0 : 8)); | ||
146 | val32 |= (td << (dev ? 8 : 0)); | ||
147 | writel(val32, base + BK3710_DMASTB); | ||
148 | |||
149 | val32 = readl(base + BK3710_DMARCVR) & (0xFF << (dev ? 0 : 8)); | ||
150 | val32 |= (tkw << (dev ? 8 : 0)); | ||
151 | writel(val32, base + BK3710_DMARCVR); | ||
152 | |||
153 | /* Disable UDMA for Device */ | ||
154 | val16 = readw(base + BK3710_UDMACTL) & ~(1 << dev); | ||
155 | writew(val16, base + BK3710_UDMACTL); | ||
156 | } | ||
157 | |||
158 | static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, | ||
159 | unsigned int dev, unsigned int cycletime, | ||
160 | unsigned int mode) | ||
161 | { | ||
162 | u8 t2, t2i, t0; | ||
163 | u32 val32; | ||
164 | struct ide_timing *t; | ||
165 | |||
166 | /* PIO Data Setup */ | ||
167 | t0 = DIV_ROUND_UP(cycletime, ideclk_period); | ||
168 | t2 = DIV_ROUND_UP(ide_timing_find_mode(XFER_PIO_0 + mode)->active, | ||
169 | ideclk_period); | ||
170 | |||
171 | t2i = t0 - t2 - 1; | ||
172 | t2 -= 1; | ||
173 | |||
174 | val32 = readl(base + BK3710_DATSTB) & (0xFF << (dev ? 0 : 8)); | ||
175 | val32 |= (t2 << (dev ? 8 : 0)); | ||
176 | writel(val32, base + BK3710_DATSTB); | ||
177 | |||
178 | val32 = readl(base + BK3710_DATRCVR) & (0xFF << (dev ? 0 : 8)); | ||
179 | val32 |= (t2i << (dev ? 8 : 0)); | ||
180 | writel(val32, base + BK3710_DATRCVR); | ||
181 | |||
182 | if (mate) { | ||
183 | u8 mode2 = ide_get_best_pio_mode(mate, 255, 4); | ||
184 | |||
185 | if (mode2 < mode) | ||
186 | mode = mode2; | ||
187 | } | ||
188 | |||
189 | /* TASKFILE Setup */ | ||
190 | t = ide_timing_find_mode(XFER_PIO_0 + mode); | ||
191 | t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period); | ||
192 | t2 = DIV_ROUND_UP(t->act8b, ideclk_period); | ||
193 | |||
194 | t2i = t0 - t2 - 1; | ||
195 | t2 -= 1; | ||
196 | |||
197 | val32 = readl(base + BK3710_REGSTB) & (0xFF << (dev ? 0 : 8)); | ||
198 | val32 |= (t2 << (dev ? 8 : 0)); | ||
199 | writel(val32, base + BK3710_REGSTB); | ||
200 | |||
201 | val32 = readl(base + BK3710_REGRCVR) & (0xFF << (dev ? 0 : 8)); | ||
202 | val32 |= (t2i << (dev ? 8 : 0)); | ||
203 | writel(val32, base + BK3710_REGRCVR); | ||
204 | } | ||
205 | |||
206 | static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed) | ||
207 | { | ||
208 | int is_slave = drive->dn & 1; | ||
209 | void __iomem *base = (void *)drive->hwif->dma_base; | ||
210 | |||
211 | if (xferspeed >= XFER_UDMA_0) { | ||
212 | palm_bk3710_setudmamode(base, is_slave, | ||
213 | xferspeed - XFER_UDMA_0); | ||
214 | } else { | ||
215 | palm_bk3710_setdmamode(base, is_slave, | ||
216 | drive->id[ATA_ID_EIDE_DMA_MIN], | ||
217 | xferspeed); | ||
218 | } | ||
219 | } | ||
220 | |||
221 | static void palm_bk3710_set_pio_mode(ide_drive_t *drive, u8 pio) | ||
222 | { | ||
223 | unsigned int cycle_time; | ||
224 | int is_slave = drive->dn & 1; | ||
225 | ide_drive_t *mate; | ||
226 | void __iomem *base = (void *)drive->hwif->dma_base; | ||
227 | |||
228 | /* | ||
229 | * Obtain the drive PIO data for tuning the Palm Chip registers | ||
230 | */ | ||
231 | cycle_time = ide_pio_cycle_time(drive, pio); | ||
232 | mate = ide_get_pair_dev(drive); | ||
233 | palm_bk3710_setpiomode(base, mate, is_slave, cycle_time, pio); | ||
234 | } | ||
235 | |||
236 | static void __devinit palm_bk3710_chipinit(void __iomem *base) | ||
237 | { | ||
238 | /* | ||
239 | * enable the reset_en of ATA controller so that when ata signals | ||
240 | * are brought out, by writing into device config. at that | ||
241 | * time por_n signal should not be 'Z' and have a stable value. | ||
242 | */ | ||
243 | writel(0x0300, base + BK3710_MISCCTL); | ||
244 | |||
245 | /* wait for some time and deassert the reset of ATA Device. */ | ||
246 | mdelay(100); | ||
247 | |||
248 | /* Deassert the Reset */ | ||
249 | writel(0x0200, base + BK3710_MISCCTL); | ||
250 | |||
251 | /* | ||
252 | * Program the IDETIMP Register Value based on the following assumptions | ||
253 | * | ||
254 | * (ATA_IDETIMP_IDEEN , ENABLE ) | | ||
255 | * (ATA_IDETIMP_SLVTIMEN , DISABLE) | | ||
256 | * (ATA_IDETIMP_RDYSMPL , 70NS) | | ||
257 | * (ATA_IDETIMP_RDYRCVRY , 50NS) | | ||
258 | * (ATA_IDETIMP_DMAFTIM1 , PIOCOMP) | | ||
259 | * (ATA_IDETIMP_PREPOST1 , DISABLE) | | ||
260 | * (ATA_IDETIMP_RDYSEN1 , DISABLE) | | ||
261 | * (ATA_IDETIMP_PIOFTIM1 , DISABLE) | | ||
262 | * (ATA_IDETIMP_DMAFTIM0 , PIOCOMP) | | ||
263 | * (ATA_IDETIMP_PREPOST0 , DISABLE) | | ||
264 | * (ATA_IDETIMP_RDYSEN0 , DISABLE) | | ||
265 | * (ATA_IDETIMP_PIOFTIM0 , DISABLE) | ||
266 | */ | ||
267 | writew(0xB388, base + BK3710_IDETIMP); | ||
268 | |||
269 | /* | ||
270 | * Configure SIDETIM Register | ||
271 | * (ATA_SIDETIM_RDYSMPS1 ,120NS ) | | ||
272 | * (ATA_SIDETIM_RDYRCYS1 ,120NS ) | ||
273 | */ | ||
274 | writeb(0, base + BK3710_SIDETIM); | ||
275 | |||
276 | /* | ||
277 | * UDMACTL Ultra-ATA DMA Control | ||
278 | * (ATA_UDMACTL_UDMAP1 , 0 ) | | ||
279 | * (ATA_UDMACTL_UDMAP0 , 0 ) | ||
280 | * | ||
281 | */ | ||
282 | writew(0, base + BK3710_UDMACTL); | ||
283 | |||
284 | /* | ||
285 | * MISCCTL Miscellaneous Conrol Register | ||
286 | * (ATA_MISCCTL_RSTMODEP , 1) | | ||
287 | * (ATA_MISCCTL_RESETP , 0) | | ||
288 | * (ATA_MISCCTL_TIMORIDE , 1) | ||
289 | */ | ||
290 | writel(0x201, base + BK3710_MISCCTL); | ||
291 | |||
292 | /* | ||
293 | * IORDYTMP IORDY Timer for Primary Register | ||
294 | * (ATA_IORDYTMP_IORDYTMP , 0xffff ) | ||
295 | */ | ||
296 | writel(0xFFFF, base + BK3710_IORDYTMP); | ||
297 | |||
298 | /* | ||
299 | * Configure BMISP Register | ||
300 | * (ATA_BMISP_DMAEN1 , DISABLE ) | | ||
301 | * (ATA_BMISP_DMAEN0 , DISABLE ) | | ||
302 | * (ATA_BMISP_IORDYINT , CLEAR) | | ||
303 | * (ATA_BMISP_INTRSTAT , CLEAR) | | ||
304 | * (ATA_BMISP_DMAERROR , CLEAR) | ||
305 | */ | ||
306 | writew(0, base + BK3710_BMISP); | ||
307 | |||
308 | palm_bk3710_setpiomode(base, NULL, 0, 600, 0); | ||
309 | palm_bk3710_setpiomode(base, NULL, 1, 600, 0); | ||
310 | } | ||
311 | |||
312 | static u8 palm_bk3710_cable_detect(ide_hwif_t *hwif) | ||
313 | { | ||
314 | return ATA_CBL_PATA80; | ||
315 | } | ||
316 | |||
317 | static int __devinit palm_bk3710_init_dma(ide_hwif_t *hwif, | ||
318 | const struct ide_port_info *d) | ||
319 | { | ||
320 | printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name); | ||
321 | |||
322 | if (ide_allocate_dma_engine(hwif)) | ||
323 | return -1; | ||
324 | |||
325 | hwif->dma_base = hwif->io_ports.data_addr - IDE_PALM_ATA_PRI_REG_OFFSET; | ||
326 | |||
327 | hwif->dma_ops = &sff_dma_ops; | ||
328 | |||
329 | return 0; | ||
330 | } | ||
331 | |||
332 | static const struct ide_port_ops palm_bk3710_ports_ops = { | ||
333 | .set_pio_mode = palm_bk3710_set_pio_mode, | ||
334 | .set_dma_mode = palm_bk3710_set_dma_mode, | ||
335 | .cable_detect = palm_bk3710_cable_detect, | ||
336 | }; | ||
337 | |||
338 | static struct ide_port_info __devinitdata palm_bk3710_port_info = { | ||
339 | .init_dma = palm_bk3710_init_dma, | ||
340 | .port_ops = &palm_bk3710_ports_ops, | ||
341 | .host_flags = IDE_HFLAG_MMIO, | ||
342 | .pio_mask = ATA_PIO4, | ||
343 | .mwdma_mask = ATA_MWDMA2, | ||
344 | }; | ||
345 | |||
346 | static int __init palm_bk3710_probe(struct platform_device *pdev) | ||
347 | { | ||
348 | struct clk *clk; | ||
349 | struct resource *mem, *irq; | ||
350 | unsigned long base, rate; | ||
351 | int i, rc; | ||
352 | hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; | ||
353 | |||
354 | clk = clk_get(&pdev->dev, "IDECLK"); | ||
355 | if (IS_ERR(clk)) | ||
356 | return -ENODEV; | ||
357 | |||
358 | clk_enable(clk); | ||
359 | rate = clk_get_rate(clk); | ||
360 | ideclk_period = 1000000000UL / rate; | ||
361 | |||
362 | /* Register the IDE interface with Linux ATA Interface */ | ||
363 | memset(&hw, 0, sizeof(hw)); | ||
364 | |||
365 | mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | ||
366 | if (mem == NULL) { | ||
367 | printk(KERN_ERR "failed to get memory region resource\n"); | ||
368 | return -ENODEV; | ||
369 | } | ||
370 | |||
371 | irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); | ||
372 | if (irq == NULL) { | ||
373 | printk(KERN_ERR "failed to get IRQ resource\n"); | ||
374 | return -ENODEV; | ||
375 | } | ||
376 | |||
377 | if (request_mem_region(mem->start, mem->end - mem->start + 1, | ||
378 | "palm_bk3710") == NULL) { | ||
379 | printk(KERN_ERR "failed to request memory region\n"); | ||
380 | return -EBUSY; | ||
381 | } | ||
382 | |||
383 | base = IO_ADDRESS(mem->start); | ||
384 | |||
385 | /* Configure the Palm Chip controller */ | ||
386 | palm_bk3710_chipinit((void __iomem *)base); | ||
387 | |||
388 | for (i = 0; i < IDE_NR_PORTS - 2; i++) | ||
389 | hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i; | ||
390 | hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET; | ||
391 | hw.irq = irq->start; | ||
392 | hw.dev = &pdev->dev; | ||
393 | hw.chipset = ide_palm3710; | ||
394 | |||
395 | palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 : | ||
396 | ATA_UDMA5; | ||
397 | |||
398 | rc = ide_host_add(&palm_bk3710_port_info, hws, NULL); | ||
399 | if (rc) | ||
400 | goto out; | ||
401 | |||
402 | return 0; | ||
403 | out: | ||
404 | printk(KERN_WARNING "Palm Chip BK3710 IDE Register Fail\n"); | ||
405 | return rc; | ||
406 | } | ||
407 | |||
408 | /* work with hotplug and coldplug */ | ||
409 | MODULE_ALIAS("platform:palm_bk3710"); | ||
410 | |||
411 | static struct platform_driver platform_bk_driver = { | ||
412 | .driver = { | ||
413 | .name = "palm_bk3710", | ||
414 | .owner = THIS_MODULE, | ||
415 | }, | ||
416 | }; | ||
417 | |||
418 | static int __init palm_bk3710_init(void) | ||
419 | { | ||
420 | return platform_driver_probe(&platform_bk_driver, palm_bk3710_probe); | ||
421 | } | ||
422 | |||
423 | module_init(palm_bk3710_init); | ||
424 | MODULE_LICENSE("GPL"); | ||