1 files changed, 33 insertions, 65 deletions

diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 8444fc6fbf61..28902ebd5539 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -50,10 +50,8 @@ MODULE_LICENSE("GPL");
 struct isp1301 {
         struct otg_transceiver  otg;
         struct i2c_client       *client;
-        struct i2c_client       c;
         void                    (*i2c_release)(struct device *dev);
 
-        int                     irq;
         int                     irq_type;
 
         u32                     last_otg_ctrl;
@@ -139,14 +137,6 @@ static inline void notresponding(struct isp1301 *isp)
 
 /*-------------------------------------------------------------------------*/
 
-/* only two addresses possible */
-#define ISP_BASE                0x2c
-static unsigned short normal_i2c[] = {
-        ISP_BASE, ISP_BASE + 1,
-        I2C_CLIENT_END };
-
-I2C_CLIENT_INSMOD;
-
 static struct i2c_driver isp1301_driver;
 
 /* smbus apis are used for portability */
@@ -1230,7 +1220,7 @@ static void isp1301_release(struct device *dev)
 
 static struct isp1301 *the_transceiver;
 
-static int isp1301_detach_client(struct i2c_client *i2c)
+static int __exit isp1301_remove(struct i2c_client *i2c)
 {
         struct isp1301  *isp;
 
@@ -1238,7 +1228,7 @@ static int isp1301_detach_client(struct i2c_client *i2c)
 
         isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0);
         isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0);
-        free_irq(isp->irq, isp);
+        free_irq(i2c->irq, isp);
 #ifdef  CONFIG_USB_OTG
         otg_unbind(isp);
 #endif
@@ -1253,7 +1243,7 @@ static int isp1301_detach_client(struct i2c_client *i2c)
         put_device(&i2c->dev);
         the_transceiver = 0;
 
-        return i2c_detach_client(i2c);
+        return 0;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1509,12 +1499,10 @@ isp1301_start_hnp(struct otg_transceiver *dev)
 
 /*-------------------------------------------------------------------------*/
 
-/* no error returns, they'd just make bus scanning stop */
-static int isp1301_probe(struct i2c_adapter *bus, int address, int kind)
+static int __init isp1301_probe(struct i2c_client *i2c)
 {
         int                     status;
         struct isp1301          *isp;
-        struct i2c_client       *i2c;
 
         if (the_transceiver)
                 return 0;
@@ -1528,37 +1516,19 @@ static int isp1301_probe(struct i2c_adapter *bus, int address, int kind)
         isp->timer.function = isp1301_timer;
         isp->timer.data = (unsigned long) isp;
 
-        isp->irq = -1;
-        isp->c.addr = address;
-        i2c_set_clientdata(&isp->c, isp);
-        isp->c.adapter = bus;
-        isp->c.driver = &isp1301_driver;
-        strlcpy(isp->c.name, DRIVER_NAME, I2C_NAME_SIZE);
-        isp->client = i2c = &isp->c;
-
-        /* if this is a true probe, verify the chip ... */
-        if (kind < 0) {
-                status = isp1301_get_u16(isp, ISP1301_VENDOR_ID);
-                if (status != I2C_VENDOR_ID_PHILIPS) {
-                        dev_dbg(&bus->dev, "addr %d not philips id: %d\n",
-                                address, status);
-                        goto fail1;
-                }
-                status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID);
-                if (status != I2C_PRODUCT_ID_PHILIPS_1301) {
-                        dev_dbg(&bus->dev, "%d not isp1301, %d\n",
-                                address, status);
-                        goto fail1;
-                }
-        }
+        i2c_set_clientdata(i2c, isp);
+        isp->client = i2c;
 
-        status = i2c_attach_client(i2c);
-        if (status < 0) {
-                dev_dbg(&bus->dev, "can't attach %s to device %d, err %d\n",
-                                DRIVER_NAME, address, status);
-fail1:
-                kfree(isp);
-                return 0;
+        /* verify the chip (shouldn't be necesary) */
+        status = isp1301_get_u16(isp, ISP1301_VENDOR_ID);
+        if (status != I2C_VENDOR_ID_PHILIPS) {
+                dev_dbg(&i2c->dev, "not philips id: %d\n", status);
+                goto fail;
+        }
+        status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID);
+        if (status != I2C_PRODUCT_ID_PHILIPS_1301) {
+                dev_dbg(&i2c->dev, "not isp1301, %d\n", status);
+                goto fail;
         }
         isp->i2c_release = i2c->dev.release;
         i2c->dev.release = isp1301_release;
@@ -1587,7 +1557,7 @@ fail1:
         status = otg_bind(isp);
         if (status < 0) {
                 dev_dbg(&i2c->dev, "can't bind OTG\n");
-                goto fail2;
+                goto fail;
         }
 #endif
 
@@ -1600,26 +1570,21 @@ fail1:
 
                 /* IRQ wired at M14 */
                 omap_cfg_reg(M14_1510_GPIO2);
-                isp->irq = OMAP_GPIO_IRQ(2);
                 if (gpio_request(2, "isp1301") == 0)
                         gpio_direction_input(2);
                 isp->irq_type = IRQF_TRIGGER_FALLING;
         }
 
         isp->irq_type |= IRQF_SAMPLE_RANDOM;
-        status = request_irq(isp->irq, isp1301_irq,
+        status = request_irq(i2c->irq, isp1301_irq,
                         isp->irq_type, DRIVER_NAME, isp);
         if (status < 0) {
                 dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n",
-                                isp->irq, status);
-#ifdef  CONFIG_USB_OTG
-fail2:
-#endif
-                i2c_detach_client(i2c);
-                goto fail1;
+                                i2c->irq, status);
+                goto fail;
         }
 
-        isp->otg.dev = &isp->client->dev;
+        isp->otg.dev = &i2c->dev;
         isp->otg.label = DRIVER_NAME;
 
         isp->otg.set_host = isp1301_set_host,
@@ -1650,22 +1615,25 @@ fail2:
                         status);
 
         return 0;
-}
 
-static int isp1301_scan_bus(struct i2c_adapter *bus)
-{
-        if (!i2c_check_functionality(bus, I2C_FUNC_SMBUS_BYTE_DATA
-                        | I2C_FUNC_SMBUS_READ_WORD_DATA))
-                return -EINVAL;
-        return i2c_probe(bus, &addr_data, isp1301_probe);
+fail:
+        kfree(isp);
+        return -ENODEV;
 }
 
+static const struct i2c_device_id isp1301_id[] = {
+        { "isp1301_omap", 0 },
+        { }
+};
+MODULE_DEVICE_TABLE(i2c, isp1301_id);
+
 static struct i2c_driver isp1301_driver = {
         .driver = {
                 .name   = "isp1301_omap",
         },
-        .attach_adapter = isp1301_scan_bus,
-        .detach_client  = isp1301_detach_client,
+        .probe          = isp1301_probe,
+        .remove         = __exit_p(isp1301_remove),
+        .id_table       = isp1301_id,
 };
 
 /*-------------------------------------------------------------------------*/