3 files changed, 465 insertions, 0 deletions

diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 09fbc598d149..3944e889cb21 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -143,4 +143,14 @@ config SENSORS_MAX6875
           This driver can also be built as a module.  If so, the module
           will be called max6875.
 
+config SENSORS_TSL2550
+        tristate "Taos TSL2550 ambient light sensor"
+        depends on EXPERIMENTAL
+        help
+          If you say yes here you get support for the Taos TSL2550
+          ambient light sensor.
+
+          This driver can also be built as a module.  If so, the module
+          will be called tsl2550.
+
 endmenu
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index cc54a4d36cc8..d8cbeb3f4b63 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
 obj-$(CONFIG_SENSORS_PCF8591)   += pcf8591.o
 obj-$(CONFIG_ISP1301_OMAP)      += isp1301_omap.o
 obj-$(CONFIG_TPS65010)          += tps65010.o
+obj-$(CONFIG_SENSORS_TSL2550)   += tsl2550.o
 
 ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/i2c/chips/tsl2550.c
new file mode 100644
index 000000000000..ef80330b855f
--- /dev/null
+++ b/drivers/i2c/chips/tsl2550.c
@@ -0,0 +1,454 @@
+/*
+ *  tsl2550.c - Linux kernel modules for ambient light sensor
+ *
+ *  Copyright (C) 2007 Rodolfo Giometti <giometti@linux.it>
+ *  Copyright (C) 2007 Eurotech S.p.A. <info@eurotech.it>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+
+#define TSL2550_DRV_NAME        "tsl2550"
+#define DRIVER_VERSION          "1.1.0"
+
+/*
+ * Defines
+ */
+
+#define TSL2550_POWER_DOWN              0x00
+#define TSL2550_POWER_UP                0x03
+#define TSL2550_STANDARD_RANGE          0x18
+#define TSL2550_EXTENDED_RANGE          0x1d
+#define TSL2550_READ_ADC0               0x43
+#define TSL2550_READ_ADC1               0x83
+
+/*
+ * Structs
+ */
+
+struct tsl2550_data {
+        struct i2c_client *client;
+        struct mutex update_lock;
+
+        unsigned int power_state : 1;
+        unsigned int operating_mode : 1;
+};
+
+/*
+ * Global data
+ */
+
+static const u8 TSL2550_MODE_RANGE[2] = {
+        TSL2550_STANDARD_RANGE, TSL2550_EXTENDED_RANGE,
+};
+
+/*
+ * Management functions
+ */
+
+static int tsl2550_set_operating_mode(struct i2c_client *client, int mode)
+{
+        struct tsl2550_data *data = i2c_get_clientdata(client);
+
+        int ret = i2c_smbus_write_byte(client, TSL2550_MODE_RANGE[mode]);
+
+        data->operating_mode = mode;
+
+        return ret;
+}
+
+static int tsl2550_set_power_state(struct i2c_client *client, int state)
+{
+        struct tsl2550_data *data = i2c_get_clientdata(client);
+        int ret;
+
+        if (state == 0)
+                ret = i2c_smbus_write_byte(client, TSL2550_POWER_DOWN);
+        else {
+                ret = i2c_smbus_write_byte(client, TSL2550_POWER_UP);
+
+                /* On power up we should reset operating mode also... */
+                tsl2550_set_operating_mode(client, data->operating_mode);
+        }
+
+        data->power_state = state;
+
+        return ret;
+}
+
+static int tsl2550_get_adc_value(struct i2c_client *client, u8 cmd)
+{
+        unsigned long end;
+        int loop = 0, ret = 0;
+
+        /*
+         * Read ADC channel waiting at most 400ms (see data sheet for further
+         * info).
+         * To avoid long busy wait we spin for few milliseconds then
+         * start sleeping.
+         */
+        end = jiffies + msecs_to_jiffies(400);
+        while (time_before(jiffies, end)) {
+                i2c_smbus_write_byte(client, cmd);
+
+                if (loop++ < 5)
+                        mdelay(1);
+                else
+                        msleep(1);
+
+                ret = i2c_smbus_read_byte(client);
+                if (ret < 0)
+                        return ret;
+                else if (ret & 0x0080)
+                        break;
+        }
+        if (!(ret & 0x80))
+                return -EIO;
+        return ret & 0x7f;      /* remove the "valid" bit */
+}
+
+/*
+ * LUX calculation
+ */
+
+#define TSL2550_MAX_LUX         1846
+
+static const u8 ratio_lut[] = {
+        100, 100, 100, 100, 100, 100, 100, 100,
+        100, 100, 100, 100, 100, 100, 99, 99,
+        99, 99, 99, 99, 99, 99, 99, 99,
+        99, 99, 99, 98, 98, 98, 98, 98,
+        98, 98, 97, 97, 97, 97, 97, 96,
+        96, 96, 96, 95, 95, 95, 94, 94,
+        93, 93, 93, 92, 92, 91, 91, 90,
+        89, 89, 88, 87, 87, 86, 85, 84,
+        83, 82, 81, 80, 79, 78, 77, 75,
+        74, 73, 71, 69, 68, 66, 64, 62,
+        60, 58, 56, 54, 52, 49, 47, 44,
+        42, 41, 40, 40, 39, 39, 38, 38,
+        37, 37, 37, 36, 36, 36, 35, 35,
+        35, 35, 34, 34, 34, 34, 33, 33,
+        33, 33, 32, 32, 32, 32, 32, 31,
+        31, 31, 31, 31, 30, 30, 30, 30,
+        30,
+};
+
+static const u16 count_lut[] = {
+        0, 1, 2, 3, 4, 5, 6, 7,
+        8, 9, 10, 11, 12, 13, 14, 15,
+        16, 18, 20, 22, 24, 26, 28, 30,
+        32, 34, 36, 38, 40, 42, 44, 46,
+        49, 53, 57, 61, 65, 69, 73, 77,
+        81, 85, 89, 93, 97, 101, 105, 109,
+        115, 123, 131, 139, 147, 155, 163, 171,
+        179, 187, 195, 203, 211, 219, 227, 235,
+        247, 263, 279, 295, 311, 327, 343, 359,
+        375, 391, 407, 423, 439, 455, 471, 487,
+        511, 543, 575, 607, 639, 671, 703, 735,
+        767, 799, 831, 863, 895, 927, 959, 991,
+        1039, 1103, 1167, 1231, 1295, 1359, 1423, 1487,
+        1551, 1615, 1679, 1743, 1807, 1871, 1935, 1999,
+        2095, 2223, 2351, 2479, 2607, 2735, 2863, 2991,
+        3119, 3247, 3375, 3503, 3631, 3759, 3887, 4015,
+};
+
+/*
+ * This function is described into Taos TSL2550 Designer's Notebook
+ * pages 2, 3.
+ */
+static int tsl2550_calculate_lux(u8 ch0, u8 ch1)
+{
+        unsigned int lux;
+
+        /* Look up count from channel values */
+        u16 c0 = count_lut[ch0];
+        u16 c1 = count_lut[ch1];
+
+        /*
+         * Calculate ratio.
+         * Note: the "128" is a scaling factor
+         */
+        u8 r = 128;
+
+        /* Avoid division by 0 and count 1 cannot be greater than count 0 */
+        if (c0 && (c1 <= c0))
+                r = c1 * 128 / c0;
+        else
+                return -1;
+
+        /* Calculate LUX */
+        lux = ((c0 - c1) * ratio_lut[r]) / 256;
+
+        /* LUX range check */
+        return lux > TSL2550_MAX_LUX ? TSL2550_MAX_LUX : lux;
+}
+
+/*
+ * SysFS support
+ */
+
+static ssize_t tsl2550_show_power_state(struct device *dev,
+                struct device_attribute *attr, char *buf)
+{
+        struct tsl2550_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+        return sprintf(buf, "%u\n", data->power_state);
+}
+
+static ssize_t tsl2550_store_power_state(struct device *dev,
+                struct device_attribute *attr, const char *buf, size_t count)
+{
+        struct i2c_client *client = to_i2c_client(dev);
+        struct tsl2550_data *data = i2c_get_clientdata(client);
+        unsigned long val = simple_strtoul(buf, NULL, 10);
+        int ret;
+
+        if (val < 0 || val > 1)
+                return -EINVAL;
+
+        mutex_lock(&data->update_lock);
+        ret = tsl2550_set_power_state(client, val);
+        mutex_unlock(&data->update_lock);
+
+        if (ret < 0)
+                return ret;
+
+        return count;
+}
+
+static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO,
+                   tsl2550_show_power_state, tsl2550_store_power_state);
+
+static ssize_t tsl2550_show_operating_mode(struct device *dev,
+                struct device_attribute *attr, char *buf)
+{
+        struct tsl2550_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+        return sprintf(buf, "%u\n", data->operating_mode);
+}
+
+static ssize_t tsl2550_store_operating_mode(struct device *dev,
+                struct device_attribute *attr, const char *buf, size_t count)
+{
+        struct i2c_client *client = to_i2c_client(dev);
+        struct tsl2550_data *data = i2c_get_clientdata(client);
+        unsigned long val = simple_strtoul(buf, NULL, 10);
+        int ret;
+
+        if (val < 0 || val > 1)
+                return -EINVAL;
+
+        if (data->power_state == 0)
+                return -EBUSY;
+
+        mutex_lock(&data->update_lock);
+        ret = tsl2550_set_operating_mode(client, val);
+        mutex_unlock(&data->update_lock);
+
+        if (ret < 0)
+                return ret;
+
+        return count;
+}
+
+static DEVICE_ATTR(operating_mode, S_IWUSR | S_IRUGO,
+                   tsl2550_show_operating_mode, tsl2550_store_operating_mode);
+
+static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf)
+{
+        u8 ch0, ch1;
+        int ret;
+
+        ret = tsl2550_get_adc_value(client, TSL2550_READ_ADC0);
+        if (ret < 0)
+                return ret;
+        ch0 = ret;
+
+        mdelay(1);
+
+        ret = tsl2550_get_adc_value(client, TSL2550_READ_ADC1);
+        if (ret < 0)
+                return ret;
+        ch1 = ret;
+
+        /* Do the job */
+        ret = tsl2550_calculate_lux(ch0, ch1);
+        if (ret < 0)
+                return ret;
+
+        return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t tsl2550_show_lux1_input(struct device *dev,
+                        struct device_attribute *attr, char *buf)
+{
+        struct i2c_client *client = to_i2c_client(dev);
+        struct tsl2550_data *data = i2c_get_clientdata(client);
+        int ret;
+
+        /* No LUX data if not operational */
+        if (!data->power_state)
+                return -EBUSY;
+
+        mutex_lock(&data->update_lock);
+        ret = __tsl2550_show_lux(client, buf);
+        mutex_unlock(&data->update_lock);
+
+        return ret;
+}
+
+static DEVICE_ATTR(lux1_input, S_IRUGO,
+                   tsl2550_show_lux1_input, NULL);
+
+static struct attribute *tsl2550_attributes[] = {
+        &dev_attr_power_state.attr,
+        &dev_attr_operating_mode.attr,
+        &dev_attr_lux1_input.attr,
+        NULL
+};
+
+static const struct attribute_group tsl2550_attr_group = {
+        .attrs = tsl2550_attributes,
+};
+
+/*
+ * Initialization function
+ */
+
+static void tsl2550_init_client(struct i2c_client *client)
+{
+        struct tsl2550_data *data = i2c_get_clientdata(client);
+
+        /* Power up the device and set the default operating mode */
+        tsl2550_set_power_state(client, 1);
+        tsl2550_set_operating_mode(client, data->operating_mode);
+}
+
+/*
+ * I2C init/probing/exit functions
+ */
+
+static struct i2c_driver tsl2550_driver;
+static int __devinit tsl2550_probe(struct i2c_client *client)
+{
+        struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+        struct tsl2550_data *data;
+        int *opmode, err = 0;
+
+        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) {
+                err = -EIO;
+                goto exit;
+        }
+
+        data = kzalloc(sizeof(struct tsl2550_data), GFP_KERNEL);
+        if (!data) {
+                err = -ENOMEM;
+                goto exit;
+        }
+        data->client = client;
+        i2c_set_clientdata(client, data);
+
+        /* Check platform data */
+        opmode = client->dev.platform_data;
+        if (opmode) {
+                if (*opmode < 0 || *opmode > 1) {
+                        dev_err(&client->dev, "invalid operating_mode (%d)\n",
+                                        *opmode);
+                        err = -EINVAL;
+                        goto exit_kfree;
+                }
+                data->operating_mode = *opmode;
+        } else
+                data->operating_mode = 0;       /* default mode is standard */
+        dev_info(&client->dev, "%s operating mode\n",
+                        data->operating_mode ? "extended" : "standard");
+
+        /*
+         * Probe the chip. To do so we try to power up the device and then to
+         * read back the 0x03 code
+         */
+        err = i2c_smbus_write_byte(client, TSL2550_POWER_UP);
+        if (err < 0)
+                goto exit_kfree;
+        mdelay(1);
+        err = i2c_smbus_read_byte(client);
+        if (err != TSL2550_POWER_UP) {
+                err = -ENODEV;
+                goto exit_kfree;
+        }
+
+        mutex_init(&data->update_lock);
+
+        /* Initialize the TSL2550 chip */
+        tsl2550_init_client(client);
+
+        /* Register sysfs hooks */
+        err = sysfs_create_group(&client->dev.kobj, &tsl2550_attr_group);
+        if (err)
+                goto exit_kfree;
+
+        dev_info(&client->dev, "support ver. %s enabled\n", DRIVER_VERSION);
+
+        return 0;
+
+exit_kfree:
+        kfree(data);
+exit:
+        return err;
+}
+
+static int __devexit tsl2550_remove(struct i2c_client *client)
+{
+        sysfs_remove_group(&client->dev.kobj, &tsl2550_attr_group);
+
+        /* Power down the device */
+        tsl2550_set_power_state(client, 0);
+
+        kfree(i2c_get_clientdata(client));
+
+        return 0;
+}
+
+static struct i2c_driver tsl2550_driver = {
+        .driver = {
+                .name   = TSL2550_DRV_NAME,
+                .owner  = THIS_MODULE,
+        },
+        .probe  = tsl2550_probe,
+        .remove = __devexit_p(tsl2550_remove),
+};
+
+static int __init tsl2550_init(void)
+{
+        return i2c_add_driver(&tsl2550_driver);
+}
+
+static void __exit tsl2550_exit(void)
+{
+        i2c_del_driver(&tsl2550_driver);
+}
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("TSL2550 ambient light sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(tsl2550_init);
+module_exit(tsl2550_exit);