2 files changed, 3 insertions, 437 deletions

diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index fddfc11b297f..43f70dbfc03f 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -1,410 +1,12 @@
 #
-# I2C Sensor and "other" chip configuration
+# Miscellaneous I2C chip drivers configuration
 #
 
-menu "Hardware Sensors Chip support"
-        depends on I2C
-
 config I2C_SENSOR
         tristate
         default n
 
-config SENSORS_ADM1021
-        tristate "Analog Devices ADM1021 and compatibles"
-        depends on I2C
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for Analog Devices ADM1021 
-          and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
-          Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
-          and the XEON processor built-in sensor.
-
-          This driver can also be built as a module.  If so, the module
-          will be called adm1021.
-
-config SENSORS_ADM1025
-        tristate "Analog Devices ADM1025 and compatibles"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for Analog Devices ADM1025
-          and Philips NE1619 sensor chips.
-
-          This driver can also be built as a module.  If so, the module
-          will be called adm1025.
-
-config SENSORS_ADM1026
-        tristate "Analog Devices ADM1026 and compatibles"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for Analog Devices ADM1026
-          sensor chip.
-
-          This driver can also be built as a module.  If so, the module
-          will be called adm1026.
-
-config SENSORS_ADM1031
-        tristate "Analog Devices ADM1031 and compatibles"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for Analog Devices ADM1031 
-          and ADM1030 sensor chips.
-
-          This driver can also be built as a module.  If so, the module
-          will be called adm1031.
-
-config SENSORS_ADM9240
-        tristate "Analog Devices ADM9240 and compatibles"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for Analog Devices ADM9240,
-          Dallas DS1780, National Semiconductor LM81 sensor chips.
-
-          This driver can also be built as a module.  If so, the module
-          will be called adm9240.
-
-config SENSORS_ASB100
-        tristate "Asus ASB100 Bach"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for the ASB100 Bach sensor
-          chip found on some Asus mainboards.
-
-          This driver can also be built as a module.  If so, the module
-          will be called asb100.
-
-config SENSORS_ATXP1
-        tristate "Attansic ATXP1 VID controller"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for the Attansic ATXP1 VID
-          controller.
-
-          If your board have such a chip, you are able to control your CPU
-          core and other voltages.
-
-          This driver can also be built as a module.  If so, the module
-          will be called atxp1.
-
-config SENSORS_DS1621
-        tristate "Dallas Semiconductor DS1621 and DS1625"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for Dallas Semiconductor
-          DS1621 and DS1625 sensor chips. 
-
-          This driver can also be built as a module.  If so, the module
-          will be called ds1621.
-
-config SENSORS_FSCHER
-        tristate "FSC Hermes"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for Fujitsu Siemens
-          Computers Hermes sensor chips.
-
-          This driver can also be built as a module.  If so, the module
-          will be called fscher.
-
-config SENSORS_FSCPOS
-        tristate "FSC Poseidon"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for Fujitsu Siemens
-          Computers Poseidon sensor chips.
-
-          This driver can also be built as a module.  If so, the module
-          will be called fscpos.
-
-config SENSORS_GL518SM
-        tristate "Genesys Logic GL518SM"
-        depends on I2C
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for Genesys Logic GL518SM
-          sensor chips.
-
-          This driver can also be built as a module.  If so, the module
-          will be called gl518sm.
-
-config SENSORS_GL520SM
-        tristate "Genesys Logic GL520SM"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for Genesys Logic GL520SM
-          sensor chips.
-
-          This driver can also be built as a module.  If so, the module
-          will be called gl520sm.
-
-config SENSORS_IT87
-        tristate "ITE IT87xx and compatibles"
-        depends on I2C
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for ITE IT87xx sensor chips
-          and clones: SiS960.
-
-          This driver can also be built as a module.  If so, the module
-          will be called it87.
-
-config SENSORS_LM63
-        tristate "National Semiconductor LM63"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for the National Semiconductor
-          LM63 remote diode digital temperature sensor with integrated fan
-          control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
-          motherboard, among others.
-
-          This driver can also be built as a module.  If so, the module
-          will be called lm63.
-
-config SENSORS_LM75
-        tristate "National Semiconductor LM75 and compatibles"
-        depends on I2C
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for National Semiconductor LM75
-          sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
-          9-bit precision mode), and TelCom (now Microchip) TCN75.
-
-          The DS75 and DS1775 in 10- to 12-bit precision modes will require
-          a force module parameter. The driver will not handle the extra
-          precision anyhow.
-
-          This driver can also be built as a module.  If so, the module
-          will be called lm75.
-
-config SENSORS_LM77
-        tristate "National Semiconductor LM77"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for National Semiconductor LM77
-          sensor chips.
-
-          This driver can also be built as a module.  If so, the module
-          will be called lm77.
-
-config SENSORS_LM78
-        tristate "National Semiconductor LM78 and compatibles"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for National Semiconductor LM78,
-          LM78-J and LM79.
-
-          This driver can also be built as a module.  If so, the module
-          will be called lm78.
-
-config SENSORS_LM80
-        tristate "National Semiconductor LM80"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for National Semiconductor
-          LM80 sensor chips.
-
-          This driver can also be built as a module.  If so, the module
-          will be called lm80.
-
-config SENSORS_LM83
-        tristate "National Semiconductor LM83"
-        depends on I2C
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for National Semiconductor
-          LM83 sensor chips.
-
-          This driver can also be built as a module.  If so, the module
-          will be called lm83.
-
-config SENSORS_LM85
-        tristate "National Semiconductor LM85 and compatibles"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for National Semiconductor LM85
-          sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
-
-          This driver can also be built as a module.  If so, the module
-          will be called lm85.
-
-config SENSORS_LM87
-        tristate "National Semiconductor LM87"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for National Semiconductor LM87
-          sensor chips.
-
-          This driver can also be built as a module.  If so, the module
-          will be called lm87.
-
-config SENSORS_LM90
-        tristate "National Semiconductor LM90 and compatibles"
-        depends on I2C
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for National Semiconductor LM90,
-          LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
-          MAX6658 sensor chips.
-
-          The Analog Devices ADT7461 sensor chip is also supported, but only
-          if found in ADM1032 compatibility mode.
-
-          This driver can also be built as a module.  If so, the module
-          will be called lm90.
-
-config SENSORS_LM92
-        tristate "National Semiconductor LM92 and compatibles"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for National Semiconductor LM92
-          and Maxim MAX6635 sensor chips.
-
-          This driver can also be built as a module.  If so, the module
-          will be called lm92.
-
-config SENSORS_MAX1619
-        tristate "Maxim MAX1619 sensor chip"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for MAX1619 sensor chip.
-          
-          This driver can also be built as a module.  If so, the module
-          will be called max1619.
-
-config SENSORS_PC87360
-        tristate "National Semiconductor PC87360 family"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        select I2C_ISA
-        help
-          If you say yes here you get access to the hardware monitoring
-          functions of the National Semiconductor PC8736x Super-I/O chips.
-          The PC87360, PC87363 and PC87364 only have fan monitoring and
-          control.  The PC87365 and PC87366 additionally have voltage and
-          temperature monitoring.
-
-          This driver can also be built as a module.  If so, the module
-          will be called pc87360.
-
-config SENSORS_SMSC47B397
-        tristate "SMSC LPC47B397-NC"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        select I2C_ISA
-        help
-          If you say yes here you get support for the SMSC LPC47B397-NC
-          sensor chip.
-
-          This driver can also be built as a module.  If so, the module
-          will be called smsc47b397.
-
-config SENSORS_SIS5595
-        tristate "Silicon Integrated Systems Corp. SiS5595"
-        depends on I2C && PCI && EXPERIMENTAL
-        select I2C_SENSOR
-        select I2C_ISA
-        help
-          If you say yes here you get support for the integrated sensors in
-          SiS5595 South Bridges.
-
-          This driver can also be built as a module.  If so, the module
-          will be called sis5595.
-
-config SENSORS_SMSC47M1
-        tristate "SMSC LPC47M10x and compatibles"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        select I2C_ISA
-        help
-          If you say yes here you get support for the integrated fan
-          monitoring and control capabilities of the SMSC LPC47B27x,
-          LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips.
-
-          This driver can also be built as a module.  If so, the module
-          will be called smsc47m1.
-
-config SENSORS_VIA686A
-        tristate "VIA686A"
-        depends on I2C && PCI
-        select I2C_SENSOR
-        select I2C_ISA
-        help
-          If you say yes here you get support for the integrated sensors in
-          Via 686A/B South Bridges.
-
-          This driver can also be built as a module.  If so, the module
-          will be called via686a.
-
-config SENSORS_W83781D
-        tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
-        depends on I2C
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for the Winbond W8378x series
-          of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
-          and the similar Asus AS99127F.
-          
-          This driver can also be built as a module.  If so, the module
-          will be called w83781d.
-
-config SENSORS_W83L785TS
-        tristate "Winbond W83L785TS-S"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        help
-          If you say yes here you get support for the Winbond W83L785TS-S
-          sensor chip, which is used on the Asus A7N8X, among other
-          motherboards.
-          
-          This driver can also be built as a module.  If so, the module
-          will be called w83l785ts.
-
-config SENSORS_W83627HF
-        tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        select I2C_ISA
-        help
-          If you say yes here you get support for the Winbond W836X7 series
-          of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
-
-          This driver can also be built as a module.  If so, the module
-          will be called w83627hf.
-
-config SENSORS_W83627EHF
-        tristate "Winbond W83627EHF"
-        depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
-        select I2C_ISA
-        help
-          If you say yes here you get preliminary support for the hardware
-          monitoring functionality of the Winbond W83627EHF Super-I/O chip.
-          Only fan and temperature inputs are supported at the moment, while
-          the chip does much more than that.
-
-          This driver can also be built as a module.  If so, the module
-          will be called w83627ehf.
-
-endmenu
-
-menu "Other I2C Chip support"
+menu "Miscellaneous I2C Chip support"
         depends on I2C
 
 config SENSORS_DS1337
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index b5e6d2f84f97..a876dd42b860 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -1,52 +1,16 @@
 #
-# Makefile for sensor and "other" I2C chip drivers.
+# Makefile for miscellaneous I2C chip drivers.
 #
 
-# asb100, then w83781d go first, as they can override other drivers' addresses.
-obj-$(CONFIG_SENSORS_ASB100)    += asb100.o
-obj-$(CONFIG_SENSORS_W83627HF)  += w83627hf.o
-obj-$(CONFIG_SENSORS_W83781D)   += w83781d.o
-
-obj-$(CONFIG_SENSORS_ADM1021)   += adm1021.o
-obj-$(CONFIG_SENSORS_ADM1025)   += adm1025.o
-obj-$(CONFIG_SENSORS_ADM1026)   += adm1026.o
-obj-$(CONFIG_SENSORS_ADM1031)   += adm1031.o
-obj-$(CONFIG_SENSORS_ADM9240)   += adm9240.o
-obj-$(CONFIG_SENSORS_ATXP1)     += atxp1.o
 obj-$(CONFIG_SENSORS_DS1337)    += ds1337.o
 obj-$(CONFIG_SENSORS_DS1374)    += ds1374.o
-obj-$(CONFIG_SENSORS_DS1621)    += ds1621.o
 obj-$(CONFIG_SENSORS_EEPROM)    += eeprom.o
-obj-$(CONFIG_SENSORS_FSCHER)    += fscher.o
-obj-$(CONFIG_SENSORS_FSCPOS)    += fscpos.o
-obj-$(CONFIG_SENSORS_GL518SM)   += gl518sm.o
-obj-$(CONFIG_SENSORS_GL520SM)   += gl520sm.o
-obj-$(CONFIG_SENSORS_IT87)      += it87.o
-obj-$(CONFIG_SENSORS_LM63)      += lm63.o
-obj-$(CONFIG_SENSORS_LM75)      += lm75.o
-obj-$(CONFIG_SENSORS_LM77)      += lm77.o
-obj-$(CONFIG_SENSORS_LM78)      += lm78.o
-obj-$(CONFIG_SENSORS_LM80)      += lm80.o
-obj-$(CONFIG_SENSORS_LM83)      += lm83.o
-obj-$(CONFIG_SENSORS_LM85)      += lm85.o
-obj-$(CONFIG_SENSORS_LM87)      += lm87.o
-obj-$(CONFIG_SENSORS_LM90)      += lm90.o
-obj-$(CONFIG_SENSORS_LM92)      += lm92.o
-obj-$(CONFIG_SENSORS_MAX1619)   += max1619.o
 obj-$(CONFIG_SENSORS_MAX6875)   += max6875.o
 obj-$(CONFIG_SENSORS_M41T00)    += m41t00.o
-obj-$(CONFIG_SENSORS_PC87360)   += pc87360.o
 obj-$(CONFIG_SENSORS_PCA9539)   += pca9539.o
 obj-$(CONFIG_SENSORS_PCF8574)   += pcf8574.o
 obj-$(CONFIG_SENSORS_PCF8591)   += pcf8591.o
 obj-$(CONFIG_SENSORS_RTC8564)   += rtc8564.o
-obj-$(CONFIG_SENSORS_SIS5595)   += sis5595.o
-obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
-obj-$(CONFIG_SENSORS_SMSC47M1)  += smsc47m1.o
-obj-$(CONFIG_SENSORS_VIA686A)   += via686a.o
-obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o
-obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
-
 obj-$(CONFIG_ISP1301_OMAP)      += isp1301_omap.o
 obj-$(CONFIG_TPS65010)          += tps65010.o