1 files changed, 10 insertions, 32 deletions

diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/i2c/chips/tsl2550.c
index b96f3025e588..aa96bd2d27ea 100644
--- a/drivers/i2c/chips/tsl2550.c
+++ b/drivers/i2c/chips/tsl2550.c
@@ -24,10 +24,9 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/mutex.h>
-#include <linux/delay.h>
 
 #define TSL2550_DRV_NAME        "tsl2550"
-#define DRIVER_VERSION          "1.1.2"
+#define DRIVER_VERSION          "1.2"
 
 /*
  * Defines
@@ -96,32 +95,13 @@ static int tsl2550_set_power_state(struct i2c_client *client, int state)
 
 static int tsl2550_get_adc_value(struct i2c_client *client, u8 cmd)
 {
-        unsigned long end;
-        int loop = 0, ret = 0;
+        int ret;
 
-        /*
-         * Read ADC channel waiting at most 400ms (see data sheet for further
-         * info).
-         * To avoid long busy wait we spin for few milliseconds then
-         * start sleeping.
-         */
-        end = jiffies + msecs_to_jiffies(400);
-        while (time_before(jiffies, end)) {
-                i2c_smbus_write_byte(client, cmd);
-
-                if (loop++ < 5)
-                        mdelay(1);
-                else
-                        msleep(1);
-
-                ret = i2c_smbus_read_byte(client);
-                if (ret < 0)
-                        return ret;
-                else if (ret & 0x0080)
-                        break;
-        }
+        ret = i2c_smbus_read_byte_data(client, cmd);
+        if (ret < 0)
+                return ret;
         if (!(ret & 0x80))
-                return -EIO;
+                return -EAGAIN;
         return ret & 0x7f;      /* remove the "valid" bit */
 }
 
@@ -285,8 +265,6 @@ static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf)
                 return ret;
         ch0 = ret;
 
-        mdelay(1);
-
         ret = tsl2550_get_adc_value(client, TSL2550_READ_ADC1);
         if (ret < 0)
                 return ret;
@@ -345,11 +323,10 @@ static int tsl2550_init_client(struct i2c_client *client)
          * Probe the chip. To do so we try to power up the device and then to
          * read back the 0x03 code
          */
-        err = i2c_smbus_write_byte(client, TSL2550_POWER_UP);
+        err = i2c_smbus_read_byte_data(client, TSL2550_POWER_UP);
         if (err < 0)
                 return err;
-        mdelay(1);
-        if (i2c_smbus_read_byte(client) != TSL2550_POWER_UP)
+        if (err != TSL2550_POWER_UP)
                 return -ENODEV;
         data->power_state = 1;
 
@@ -374,7 +351,8 @@ static int __devinit tsl2550_probe(struct i2c_client *client,
         struct tsl2550_data *data;
         int *opmode, err = 0;
 
-        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) {
+        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE
+                                            | I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
                 err = -EIO;
                 goto exit;
         }