1 files changed, 1 insertions, 24 deletions

diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 5f06e81a2087..05af7b0292f4 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -102,13 +102,6 @@ MODULE_PARM_DESC(force_addr,
                  "Forcibly enable the PIIX4 at the given address. "
                  "EXTREMELY DANGEROUS!");
 
-/* If fix_hstcfg is set to anything different from 0, we reset one of the
-   registers to be a valid value. */
-static int fix_hstcfg;
-module_param (fix_hstcfg, int, 0);
-MODULE_PARM_DESC(fix_hstcfg,
-                "Fix config register. Needed on some boards (Force CPCI735).");
-
 static int piix4_transaction(void);
 
 static unsigned short piix4_smba;
@@ -166,22 +159,6 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
 
         pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp);
 
-        /* Some BIOS will set up the chipset incorrectly and leave a register
-           in an undefined state (causing I2C to act very strangely). */
-        if (temp & 0x02) {
-                if (fix_hstcfg) {
-                        dev_info(&PIIX4_dev->dev, "Working around buggy BIOS "
-                                        "(I2C)\n");
-                        temp &= 0xfd;
-                        pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp);
-                } else {
-                        dev_info(&PIIX4_dev->dev, "Unusual config register "
-                                        "value\n");
-                        dev_info(&PIIX4_dev->dev, "Try using fix_hstcfg=1 if "
-                                        "you experience problems\n");
-                }
-        }
- 
         /* If force_addr is set, we program the new address here. Just to make
            sure, we disable the PIIX4 first. */
         if (force_addr) {
@@ -214,7 +191,7 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
                 }
         }
 
-        if ((temp & 0x0E) == 8)
+        if (((temp & 0x0E) == 8) || ((temp & 0x0E) == 2))
                 dev_dbg(&PIIX4_dev->dev, "Using Interrupt 9 for SMBus.\n");
         else if ((temp & 0x0E) == 0)
                 dev_dbg(&PIIX4_dev->dev, "Using Interrupt SMI# for SMBus.\n");