1 files changed, 316 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
new file mode 100644
index 000000000000..83307ef3b41f
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -0,0 +1,316 @@
+/*
+ * Synopsys DesignWare I2C adapter driver (master only).
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ * Copyright (C) 2011 Intel corporation.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include "i2c-designware-core.h"
+
+#define DRIVER_NAME "i2c-designware-pci"
+
+enum dw_pci_ctl_id_t {
+        moorestown_0,
+        moorestown_1,
+        moorestown_2,
+
+        medfield_0,
+        medfield_1,
+        medfield_2,
+        medfield_3,
+        medfield_4,
+        medfield_5,
+};
+
+struct dw_pci_controller {
+        u32 bus_num;
+        u32 bus_cfg;
+        u32 tx_fifo_depth;
+        u32 rx_fifo_depth;
+        u32 clk_khz;
+};
+
+#define INTEL_MID_STD_CFG  (DW_IC_CON_MASTER |                  \
+                                DW_IC_CON_SLAVE_DISABLE |       \
+                                DW_IC_CON_RESTART_EN)
+
+static struct  dw_pci_controller  dw_pci_controllers[] = {
+        [moorestown_0] = {
+                .bus_num     = 0,
+                .bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+                .tx_fifo_depth = 32,
+                .rx_fifo_depth = 32,
+                .clk_khz      = 25000,
+        },
+        [moorestown_1] = {
+                .bus_num     = 1,
+                .bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+                .tx_fifo_depth = 32,
+                .rx_fifo_depth = 32,
+                .clk_khz      = 25000,
+        },
+        [moorestown_2] = {
+                .bus_num     = 2,
+                .bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+                .tx_fifo_depth = 32,
+                .rx_fifo_depth = 32,
+                .clk_khz      = 25000,
+        },
+        [medfield_0] = {
+                .bus_num     = 0,
+                .bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+                .tx_fifo_depth = 32,
+                .rx_fifo_depth = 32,
+                .clk_khz      = 25000,
+        },
+        [medfield_1] = {
+                .bus_num     = 1,
+                .bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+                .tx_fifo_depth = 32,
+                .rx_fifo_depth = 32,
+                .clk_khz      = 25000,
+        },
+        [medfield_2] = {
+                .bus_num     = 2,
+                .bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+                .tx_fifo_depth = 32,
+                .rx_fifo_depth = 32,
+                .clk_khz      = 25000,
+        },
+        [medfield_3] = {
+                .bus_num     = 3,
+                .bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_STD,
+                .tx_fifo_depth = 32,
+                .rx_fifo_depth = 32,
+                .clk_khz      = 25000,
+        },
+        [medfield_4] = {
+                .bus_num     = 4,
+                .bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+                .tx_fifo_depth = 32,
+                .rx_fifo_depth = 32,
+                .clk_khz      = 25000,
+        },
+        [medfield_5] = {
+                .bus_num     = 5,
+                .bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+                .tx_fifo_depth = 32,
+                .rx_fifo_depth = 32,
+                .clk_khz      = 25000,
+        },
+};
+static struct i2c_algorithm i2c_dw_algo = {
+        .master_xfer    = i2c_dw_xfer,
+        .functionality  = i2c_dw_func,
+};
+
+static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
+{
+        return dev->controller->clk_khz;
+}
+
+static int __devinit i2c_dw_pci_probe(struct pci_dev *pdev,
+const struct pci_device_id *id)
+{
+        struct dw_i2c_dev *dev;
+        struct i2c_adapter *adap;
+        unsigned long start, len;
+        void __iomem *base;
+        int r;
+        struct  dw_pci_controller *controller;
+
+        if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) {
+                printk(KERN_ERR "dw_i2c_pci_probe: invalid driver data %ld\n",
+                        id->driver_data);
+                return -EINVAL;
+        }
+
+        controller = &dw_pci_controllers[id->driver_data];
+
+        r = pci_enable_device(pdev);
+        if (r) {
+                dev_err(&pdev->dev, "Failed to enable I2C PCI device (%d)\n",
+                        r);
+                goto exit;
+        }
+
+        /* Determine the address of the I2C area */
+        start = pci_resource_start(pdev, 0);
+        len = pci_resource_len(pdev, 0);
+        if (!start || len == 0) {
+                dev_err(&pdev->dev, "base address not set\n");
+                r = -ENODEV;
+                goto exit;
+        }
+
+        r = pci_request_region(pdev, 0, DRIVER_NAME);
+        if (r) {
+                dev_err(&pdev->dev, "failed to request I2C region "
+                        "0x%lx-0x%lx\n", start,
+                        (unsigned long)pci_resource_end(pdev, 0));
+                goto exit;
+        }
+
+        base = ioremap_nocache(start, len);
+        if (!base) {
+                dev_err(&pdev->dev, "I/O memory remapping failed\n");
+                r = -ENOMEM;
+                goto err_release_region;
+        }
+
+
+        dev = kzalloc(sizeof(struct dw_i2c_dev), GFP_KERNEL);
+        if (!dev) {
+                r = -ENOMEM;
+                goto err_release_region;
+        }
+
+        init_completion(&dev->cmd_complete);
+        mutex_init(&dev->lock);
+        dev->clk = NULL;
+        dev->controller = controller;
+        dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
+        dev->base = base;
+        dev->dev = get_device(&pdev->dev);
+        dev->functionality =
+                I2C_FUNC_I2C |
+                I2C_FUNC_SMBUS_BYTE |
+                I2C_FUNC_SMBUS_BYTE_DATA |
+                I2C_FUNC_SMBUS_WORD_DATA |
+                I2C_FUNC_SMBUS_I2C_BLOCK;
+        dev->master_cfg =  controller->bus_cfg;
+
+        pci_set_drvdata(pdev, dev);
+
+        dev->tx_fifo_depth = controller->tx_fifo_depth;
+        dev->rx_fifo_depth = controller->rx_fifo_depth;
+        r = i2c_dw_init(dev);
+        if (r)
+                goto err_iounmap;
+
+        adap = &dev->adapter;
+        i2c_set_adapdata(adap, dev);
+        adap->owner = THIS_MODULE;
+        adap->class = 0;
+        adap->algo = &i2c_dw_algo;
+        adap->dev.parent = &pdev->dev;
+        adap->nr = controller->bus_num;
+        snprintf(adap->name, sizeof(adap->name), "i2c-designware-pci-%d",
+                adap->nr);
+
+        r = request_irq(pdev->irq, i2c_dw_isr, IRQF_SHARED, adap->name, dev);
+        if (r) {
+                dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
+                goto err_iounmap;
+        }
+
+        i2c_dw_disable_int(dev);
+        i2c_dw_clear_int(dev);
+        r = i2c_add_numbered_adapter(adap);
+        if (r) {
+                dev_err(&pdev->dev, "failure adding adapter\n");
+                goto err_free_irq;
+        }
+
+        return 0;
+
+err_free_irq:
+        free_irq(pdev->irq, dev);
+err_iounmap:
+        iounmap(dev->base);
+        pci_set_drvdata(pdev, NULL);
+        put_device(&pdev->dev);
+        kfree(dev);
+err_release_region:
+        pci_release_region(pdev, 0);
+exit:
+        return r;
+}
+
+static void __devexit i2c_dw_pci_remove(struct pci_dev *pdev)
+{
+        struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
+
+        pci_set_drvdata(pdev, NULL);
+        i2c_del_adapter(&dev->adapter);
+        put_device(&pdev->dev);
+
+        free_irq(dev->irq, dev);
+        kfree(dev);
+        pci_release_region(pdev, 0);
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("i2c_designware-pci");
+
+DEFINE_PCI_DEVICE_TABLE(i2_designware_pci_ids) = {
+        /* Moorestown */
+        { PCI_VDEVICE(INTEL, 0x0802), moorestown_0 },
+        { PCI_VDEVICE(INTEL, 0x0803), moorestown_1 },
+        { PCI_VDEVICE(INTEL, 0x0804), moorestown_2 },
+        /* Medfield */
+        { PCI_VDEVICE(INTEL, 0x0817), medfield_3,},
+        { PCI_VDEVICE(INTEL, 0x0818), medfield_4 },
+        { PCI_VDEVICE(INTEL, 0x0819), medfield_5 },
+        { PCI_VDEVICE(INTEL, 0x082C), medfield_0 },
+        { PCI_VDEVICE(INTEL, 0x082D), medfield_1 },
+        { PCI_VDEVICE(INTEL, 0x082E), medfield_2 },
+        { 0,}
+};
+MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
+
+static struct pci_driver dw_i2c_driver = {
+        .name           = DRIVER_NAME,
+        .id_table       = i2_designware_pci_ids,
+        .probe          = i2c_dw_pci_probe,
+        .remove         = __devexit_p(i2c_dw_pci_remove),
+};
+
+static int __init dw_i2c_init_driver(void)
+{
+        return  pci_register_driver(&dw_i2c_driver);
+}
+module_init(dw_i2c_init_driver);
+
+static void __exit dw_i2c_exit_driver(void)
+{
+        pci_unregister_driver(&dw_i2c_driver);
+}
+module_exit(dw_i2c_exit_driver);
+
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter");
+MODULE_LICENSE("GPL");