1 files changed, 499 insertions, 0 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
new file mode 100644
index 000000000000..edf8051da3b4
--- /dev/null
+++ b/drivers/i2c/busses/Kconfig
@@ -0,0 +1,499 @@
+#
+# Sensor device configuration
+#
+
+menu "I2C Hardware Bus support"
+        depends on I2C
+
+config I2C_ALI1535
+        tristate "ALI 1535"
+        depends on I2C && PCI && EXPERIMENTAL
+        help
+          If you say yes to this option, support will be included for the SMB
+          Host controller on Acer Labs Inc. (ALI) M1535 South Bridges.  The SMB
+          controller is part of the 7101 device, which is an ACPI-compliant
+          Power Management Unit (PMU).
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-ali1535.
+
+config I2C_ALI1563
+        tristate "ALI 1563"
+        depends on I2C && PCI && EXPERIMENTAL
+        help
+          If you say yes to this option, support will be included for the SMB
+          Host controller on Acer Labs Inc. (ALI) M1563 South Bridges.  The SMB
+          controller is part of the 7101 device, which is an ACPI-compliant
+          Power Management Unit (PMU).
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-ali1563.
+
+config I2C_ALI15X3
+        tristate "ALI 15x3"
+        depends on I2C && PCI && EXPERIMENTAL
+        help
+          If you say yes to this option, support will be included for the
+          Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-ali15x3.
+
+config I2C_AMD756
+        tristate "AMD 756/766/768/8111 and nVidia nForce"
+        depends on I2C && PCI && EXPERIMENTAL
+        help
+          If you say yes to this option, support will be included for the AMD
+          756/766/768 mainboard I2C interfaces.  The driver also includes
+          support for the first (SMBus 1.0) I2C interface of the AMD 8111 and
+          the nVidia nForce I2C interface.
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-amd756.
+
+config I2C_AMD756_S4882
+        tristate "SMBus multiplexing on the Tyan S4882"
+        depends on I2C_AMD756 && EXPERIMENTAL
+        help
+          Enabling this option will add specific SMBus support for the Tyan
+          S4882 motherboard.  On this 4-CPU board, the SMBus is multiplexed
+          over 8 different channels, where the various memory module EEPROMs
+          and temperature sensors live.  Saying yes here will give you access
+          to these in addition to the trunk.
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-amd756-s4882.
+
+config I2C_AMD8111
+        tristate "AMD 8111"
+        depends on I2C && PCI && EXPERIMENTAL
+        help
+          If you say yes to this option, support will be included for the
+          second (SMBus 2.0) AMD 8111 mainboard I2C interface.
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-amd8111.
+
+config I2C_AU1550
+        tristate "Au1550 SMBus interface"
+        depends on I2C && SOC_AU1550
+        help
+          If you say yes to this option, support will be included for the
+          Au1550 SMBus interface.
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-au1550.
+
+config I2C_ELEKTOR
+        tristate "Elektor ISA card"
+        depends on I2C && ISA && BROKEN_ON_SMP
+        select I2C_ALGOPCF
+        help
+          This supports the PCF8584 ISA bus I2C adapter.  Say Y if you own
+          such an adapter.
+
+          This support is also available as a module.  If so, the module 
+          will be called i2c-elektor.
+
+config I2C_HYDRA
+        tristate "CHRP Apple Hydra Mac I/O I2C interface"
+        depends on I2C && PCI && PPC_CHRP && EXPERIMENTAL
+        select I2C_ALGOBIT
+        help
+          This supports the use of the I2C interface in the Apple Hydra Mac
+          I/O chip on some CHRP machines (e.g. the LongTrail).  Say Y if you
+          have such a machine.
+
+          This support is also available as a module.  If so, the module
+          will be called i2c-hydra.
+
+config I2C_I801
+        tristate "Intel 82801 (ICH)"
+        depends on I2C && PCI && EXPERIMENTAL
+        help
+          If you say yes to this option, support will be included for the Intel
+          801 family of mainboard I2C interfaces.  Specifically, the following
+          versions of the chipset are supported:
+            82801AA
+            82801AB
+            82801BA
+            82801CA/CAM
+            82801DB
+            82801EB/ER (ICH5/ICH5R)
+            6300ESB
+            ICH6
+            ICH7
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-i801.
+
+config I2C_I810
+        tristate "Intel 810/815"
+        depends on I2C && PCI && EXPERIMENTAL
+        select I2C_ALGOBIT
+        help
+          If you say yes to this option, support will be included for the Intel
+          810/815 family of mainboard I2C interfaces.  Specifically, the 
+          following versions of the chipset is supported:
+            i810AA
+            i810AB
+            i810E
+            i815
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-i810.
+
+config I2C_PIIX4
+        tristate "Intel PIIX4"
+        depends on I2C && PCI
+        help
+          If you say yes to this option, support will be included for the Intel
+          PIIX4 family of mainboard I2C interfaces.  Specifically, the following
+          versions of the chipset are supported:
+            Intel PIIX4
+            Intel 440MX
+            Serverworks OSB4
+            Serverworks CSB5
+            Serverworks CSB6
+            SMSC Victory66
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-piix4.
+
+config I2C_IBM_IIC
+        tristate "IBM PPC 4xx on-chip I2C interface"
+        depends on IBM_OCP && I2C
+        help
+          Say Y here if you want to use IIC peripheral found on 
+          embedded IBM PPC 4xx based systems. 
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-ibm_iic.
+
+config I2C_IOP3XX
+        tristate "Intel IOP3xx and IXP4xx on-chip I2C interface"
+        depends on (ARCH_IOP3XX || ARCH_IXP4XX) && I2C
+        help
+          Say Y here if you want to use the IIC bus controller on
+          the Intel IOP3xx I/O Processors or IXP4xx Network Processors.
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-iop3xx.
+
+config I2C_ISA
+        tristate "ISA Bus support"
+        depends on I2C && EXPERIMENTAL
+        help
+          If you say yes to this option, support will be included for i2c
+          interfaces that are on the ISA bus.
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-isa.
+
+config I2C_ITE
+        tristate "ITE I2C Adapter"
+        depends on I2C && MIPS_ITE8172
+        select I2C_ALGOITE
+        help
+          This supports the ITE8172 I2C peripheral found on some MIPS
+          systems. Say Y if you have one of these. You should also say Y for
+          the ITE I2C driver algorithm support above.
+
+          This support is also available as a module.  If so, the module 
+          will be called i2c-ite.
+
+config I2C_IXP4XX
+        tristate "IXP4xx GPIO-Based I2C Interface"
+        depends on I2C && ARCH_IXP4XX
+        select I2C_ALGOBIT
+        help
+          Say Y here if you have an Intel IXP4xx(420,421,422,425) based 
+          system and are using GPIO lines for an I2C bus.
+
+          This support is also available as a module. If so, the module
+          will be called i2c-ixp4xx.
+
+config I2C_IXP2000
+        tristate "IXP2000 GPIO-Based I2C Interface"
+        depends on I2C && ARCH_IXP2000
+        select I2C_ALGOBIT
+        help
+          Say Y here if you have an Intel IXP2000(2400, 2800, 2850) based 
+          system and are using GPIO lines for an I2C bus.
+
+          This support is also available as a module. If so, the module
+          will be called i2c-ixp2000.
+
+config I2C_KEYWEST
+        tristate "Powermac Keywest I2C interface"
+        depends on I2C && PPC_PMAC
+        help
+          This supports the use of the I2C interface in the combo-I/O
+          chip on recent Apple machines.  Say Y if you have such a machine.
+
+          This support is also available as a module.  If so, the module 
+          will be called i2c-keywest.
+
+config I2C_MPC
+        tristate "MPC107/824x/85xx/52xx"
+        depends on I2C && PPC
+        help
+          If you say yes to this option, support will be included for the
+          built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
+          MPC85xx family processors. The driver may also work on 52xx
+          family processors, though interrupts are known not to work.
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-mpc.
+
+config I2C_NFORCE2
+        tristate "Nvidia Nforce2"
+        depends on I2C && PCI && EXPERIMENTAL
+        help
+          If you say yes to this option, support will be included for the Nvidia
+          Nforce2 family of mainboard I2C interfaces.
+          This driver also supports the nForce3 Pro 150 MCP.
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-nforce2.
+
+config I2C_PARPORT
+        tristate "Parallel port adapter"
+        depends on I2C && PARPORT
+        select I2C_ALGOBIT
+        help
+          This supports parallel port I2C adapters such as the ones made by
+          Philips or Velleman, Analog Devices evaluation boards, and more.
+          Basically any adapter using the parallel port as an I2C bus with
+          no extra chipset is supported by this driver, or could be.
+
+          This driver is a replacement for (and was inspired by) an older
+          driver named i2c-philips-par.  The new driver supports more devices,
+          and makes it easier to add support for new devices.
+          
+          Another driver exists, named i2c-parport-light, which doesn't depend
+          on the parport driver.  This is meant for embedded systems. Don't say
+          Y here if you intend to say Y or M there.
+
+          This support is also available as a module.  If so, the module 
+          will be called i2c-parport.
+
+config I2C_PARPORT_LIGHT
+        tristate "Parallel port adapter (light)"
+        depends on I2C
+        select I2C_ALGOBIT
+        help
+          This supports parallel port I2C adapters such as the ones made by
+          Philips or Velleman, Analog Devices evaluation boards, and more.
+          Basically any adapter using the parallel port as an I2C bus with
+          no extra chipset is supported by this driver, or could be.
+
+          This driver is a light version of i2c-parport.  It doesn't depend
+          on the parport driver, and uses direct I/O access instead.  This
+          might be prefered on embedded systems where wasting memory for
+          the clean but heavy parport handling is not an option.  The
+          drawback is a reduced portability and the impossibility to
+          dasiy-chain other parallel port devices.
+          
+          Don't say Y here if you said Y or M to i2c-parport.  Saying M to
+          both is possible but both modules should not be loaded at the same
+          time.
+
+          This support is also available as a module.  If so, the module 
+          will be called i2c-parport-light.
+
+config I2C_PROSAVAGE
+        tristate "S3/VIA (Pro)Savage"
+        depends on I2C && PCI && EXPERIMENTAL
+        select I2C_ALGOBIT
+        help
+          If you say yes to this option, support will be included for the
+          I2C bus and DDC bus of the S3VIA embedded Savage4 and ProSavage8
+          graphics processors.
+          chipsets supported:
+            S3/VIA KM266/VT8375 aka ProSavage8
+            S3/VIA KM133/VT8365 aka Savage4
+
+          This support is also available as a module.  If so, the module 
+          will be called i2c-prosavage.
+
+config I2C_RPXLITE
+        tristate "Embedded Planet RPX Lite/Classic support"
+        depends on (RPXLITE || RPXCLASSIC) && I2C
+        select I2C_ALGO8XX
+
+config I2C_S3C2410
+        tristate "S3C2410 I2C Driver"
+        depends on I2C && ARCH_S3C2410
+        help
+          Say Y here to include support for I2C controller in the
+          Samsung S3C2410 based System-on-Chip devices.
+
+config I2C_SAVAGE4
+        tristate "S3 Savage 4"
+        depends on I2C && PCI && EXPERIMENTAL
+        select I2C_ALGOBIT
+        help
+          If you say yes to this option, support will be included for the 
+          S3 Savage 4 I2C interface.
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-savage4.
+
+config I2C_SIBYTE
+        tristate "SiByte SMBus interface"
+        depends on SIBYTE_SB1xxx_SOC && I2C
+        help
+          Supports the SiByte SOC on-chip I2C interfaces (2 channels).
+
+config SCx200_I2C
+        tristate "NatSemi SCx200 I2C using GPIO pins"
+        depends on SCx200_GPIO && I2C
+        select I2C_ALGOBIT
+        help
+          Enable the use of two GPIO pins of a SCx200 processor as an I2C bus.
+
+          If you don't know what to do here, say N.
+
+          This support is also available as a module.  If so, the module 
+          will be called scx200_i2c.
+
+config SCx200_I2C_SCL
+        int "GPIO pin used for SCL"
+        depends on SCx200_I2C
+        default "12"
+        help
+          Enter the GPIO pin number used for the SCL signal.  This value can
+          also be specified with a module parameter.
+
+config SCx200_I2C_SDA
+        int "GPIO pin used for SDA"
+        depends on SCx200_I2C
+        default "13"
+        help
+          Enter the GPIO pin number used for the SSA signal.  This value can
+          also be specified with a module parameter.
+
+config SCx200_ACB
+        tristate "NatSemi SCx200 ACCESS.bus"
+        depends on I2C && PCI
+        help
+          Enable the use of the ACCESS.bus controllers of a SCx200 processor.
+
+          If you don't know what to do here, say N.
+
+          This support is also available as a module.  If so, the module 
+          will be called scx200_acb.
+
+config I2C_SIS5595
+        tristate "SiS 5595"
+        depends on I2C && PCI && EXPERIMENTAL
+        help
+          If you say yes to this option, support will be included for the 
+          SiS5595 SMBus (a subset of I2C) interface.
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-sis5595.
+
+config I2C_SIS630
+        tristate "SiS 630/730"
+        depends on I2C && PCI && EXPERIMENTAL
+        help
+          If you say yes to this option, support will be included for the 
+          SiS630 and SiS730 SMBus (a subset of I2C) interface.
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-sis630.
+
+config I2C_SIS96X
+        tristate "SiS 96x"
+        depends on I2C && PCI && EXPERIMENTAL
+        help
+          If you say yes to this option, support will be included for the SiS
+          96x SMBus (a subset of I2C) interfaces.  Specifically, the following
+          chipsets are supported:
+            645/961
+            645DX/961
+            645DX/962
+            648/961
+            650/961
+            735
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-sis96x.
+
+config I2C_STUB
+        tristate "I2C/SMBus Test Stub"
+        depends on I2C && EXPERIMENTAL && 'm'
+        default 'n'
+        help
+          This module may be useful to developers of SMBus client drivers,
+          especially for certain kinds of sensor chips.
+
+          If you do build this module, be sure to read the notes and warnings
+          in <file:Documentation/i2c/i2c-stub>.
+
+          If you don't know what to do here, definitely say N.
+
+config I2C_VIA
+        tristate "VIA 82C586B"
+        depends on I2C && PCI && EXPERIMENTAL
+        select I2C_ALGOBIT
+        help
+          If you say yes to this option, support will be included for the VIA
+          82C586B I2C interface
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-via.
+
+config I2C_VIAPRO
+        tristate "VIA 82C596/82C686/823x"
+        depends on I2C && PCI && EXPERIMENTAL
+        help
+          If you say yes to this option, support will be included for the VIA
+          82C596/82C686/823x I2C interfaces.  Specifically, the following 
+          chipsets are supported:
+          82C596A/B
+          82C686A/B
+          8231
+          8233
+          8233A
+          8235
+          8237
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-viapro.
+
+config I2C_VOODOO3
+        tristate "Voodoo 3"
+        depends on I2C && PCI && EXPERIMENTAL
+        select I2C_ALGOBIT
+        help
+          If you say yes to this option, support will be included for the
+          Voodoo 3 I2C interface.
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-voodoo3.
+
+config I2C_PCA_ISA
+        tristate "PCA9564 on an ISA bus"
+        depends on I2C
+        select I2C_ALGOPCA
+        help
+          This driver supports ISA boards using the Philips PCA 9564
+          Parallel bus to I2C bus controller
+          
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-pca-isa.
+
+config I2C_MV64XXX
+        tristate "Marvell mv64xxx I2C Controller"
+        depends on I2C && MV64X60 && EXPERIMENTAL
+        help
+          If you say yes to this option, support will be included for the
+          built-in I2C interface on the Marvell 64xxx line of host bridges.
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-mv64xxx.
+
+endmenu