1 files changed, 66 insertions, 1 deletions

diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index 6b1cec9950ff..a8ff4e126713 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -23,7 +23,7 @@
     Supports following chips:
 
     Chip        #vin    #fanin  #pwm    #temp   wchipid vendid  i2c     ISA
-    w83791d     10      5       3       3       0x71    0x5ca3  yes     no
+    w83791d     10      5       5       3       0x71    0x5ca3  yes     no
 
     The w83791d chip appears to be part way between the 83781d and the
     83792d. Thus, this file is derived from both the w83792d.c and
@@ -45,6 +45,7 @@
 #define NUMBER_OF_VIN           10
 #define NUMBER_OF_FANIN         5
 #define NUMBER_OF_TEMPIN        3
+#define NUMBER_OF_PWM           5
 
 /* Addresses to scan */
 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
@@ -116,6 +117,14 @@ static const u8 W83791D_REG_FAN_MIN[NUMBER_OF_FANIN] = {
         0xBD,                   /* FAN 5 Count Low Limit in DataSheet */
 };
 
+static const u8 W83791D_REG_PWM[NUMBER_OF_PWM] = {
+        0x81,                   /* PWM 1 duty cycle register in DataSheet */
+        0x83,                   /* PWM 2 duty cycle register in DataSheet */
+        0x94,                   /* PWM 3 duty cycle register in DataSheet */
+        0xA0,                   /* PWM 4 duty cycle register in DataSheet */
+        0xA1,                   /* PWM 5 duty cycle register in DataSheet */
+};
+
 static const u8 W83791D_REG_FAN_CFG[2] = {
         0x84,                   /* FAN 1/2 configuration */
         0x95,                   /* FAN 3 configuration */
@@ -276,6 +285,9 @@ struct w83791d_data {
                                    two sensors with three values
                                    (cur, over, hyst)  */
 
+        /* PWMs */
+        u8 pwm[5];              /* pwm duty cycle */
+
         /* Misc */
         u32 alarms;             /* realtime status register encoding,combined */
         u8 beep_enable;         /* Global beep enable */
@@ -653,6 +665,48 @@ static struct sensor_device_attribute sda_fan_alarm[] = {
         SENSOR_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 22),
 };
 
+/* read/write PWMs */
+static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
+                                char *buf)
+{
+        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+        int nr = sensor_attr->index;
+        struct w83791d_data *data = w83791d_update_device(dev);
+        return sprintf(buf, "%u\n", data->pwm[nr]);
+}
+
+static ssize_t store_pwm(struct device *dev, struct device_attribute *attr,
+                const char *buf, size_t count)
+{
+        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct w83791d_data *data = i2c_get_clientdata(client);
+        int nr = sensor_attr->index;
+        unsigned long val;
+
+        if (strict_strtoul(buf, 10, &val))
+                return -EINVAL;
+
+        mutex_lock(&data->update_lock);
+        data->pwm[nr] = SENSORS_LIMIT(val, 0, 255);
+        w83791d_write(client, W83791D_REG_PWM[nr], data->pwm[nr]);
+        mutex_unlock(&data->update_lock);
+        return count;
+}
+
+static struct sensor_device_attribute sda_pwm[] = {
+        SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO,
+                        show_pwm, store_pwm, 0),
+        SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO,
+                        show_pwm, store_pwm, 1),
+        SENSOR_ATTR(pwm3, S_IWUSR | S_IRUGO,
+                        show_pwm, store_pwm, 2),
+        SENSOR_ATTR(pwm4, S_IWUSR | S_IRUGO,
+                        show_pwm, store_pwm, 3),
+        SENSOR_ATTR(pwm5, S_IWUSR | S_IRUGO,
+                        show_pwm, store_pwm, 4),
+};
+
 /* read/write the temperature1, includes measured value and limits */
 static ssize_t show_temp1(struct device *dev, struct device_attribute *devattr,
                                 char *buf)
@@ -917,6 +971,9 @@ static struct attribute *w83791d_attributes[] = {
         &sda_beep_ctrl[1].dev_attr.attr,
         &dev_attr_cpu0_vid.attr,
         &dev_attr_vrm.attr,
+        &sda_pwm[0].dev_attr.attr,
+        &sda_pwm[1].dev_attr.attr,
+        &sda_pwm[2].dev_attr.attr,
         NULL
 };
 
@@ -930,6 +987,8 @@ static const struct attribute_group w83791d_group = {
 static struct attribute *w83791d_attributes_fanpwm45[] = {
         FAN_UNIT_ATTRS(3),
         FAN_UNIT_ATTRS(4),
+        &sda_pwm[3].dev_attr.attr,
+        &sda_pwm[4].dev_attr.attr,
         NULL
 };
 
@@ -1260,6 +1319,12 @@ static struct w83791d_data *w83791d_update_device(struct device *dev)
                 for (i = 0; i < 3; i++)
                         data->fan_div[i] |= (vbat_reg >> (3 + i)) & 0x04;
 
+                /* Update PWM duty cycle */
+                for (i = 0; i < NUMBER_OF_PWM; i++) {
+                        data->pwm[i] =  w83791d_read(client,
+                                                W83791D_REG_PWM[i]);
+                }
+
                 /* Update the first temperature sensor */
                 for (i = 0; i < 3; i++) {
                         data->temp1[i] = w83791d_read(client,