2 files changed, 277 insertions, 221 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index aea2d57c6764..9f01edeccac7 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -250,8 +250,6 @@ config SENSORS_CORETEMP
 
 config SENSORS_IT87
         tristate "ITE IT87xx and compatibles"
-        depends on I2C
-        select I2C_ISA
         select HWMON_VID
         help
           If you say yes here you get support for ITE IT8705F, IT8712F,
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 1dd7654cf00b..eff6036e15c0 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -31,8 +31,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/i2c-isa.h>
+#include <linux/platform_device.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/hwmon-vid.h>
@@ -41,10 +40,12 @@
 #include <linux/sysfs.h>
 #include <asm/io.h>
 
+#define DRVNAME "it87"
 
-static unsigned short isa_address;
 enum chips { it87, it8712, it8716, it8718 };
 
+static struct platform_device *pdev;
+
 #define REG     0x2e    /* The register to read/write */
 #define DEV     0x07    /* Register: Logical device select */
 #define VAL     0x2f    /* The value to read/write */
@@ -112,10 +113,6 @@ static int update_vbat;
 /* Not all BIOSes properly configure the PWM registers */
 static int fix_pwm_polarity;
 
-/* Values read from Super-I/O config space */
-static u16 chip_type;
-static u8 vid_value;
-
 /* Many IT87 constants specified below */
 
 /* Length of ISA address segment */
@@ -216,13 +213,20 @@ static const unsigned int pwm_freq[8] = {
 };
 
 
+struct it87_sio_data {
+        enum chips type;
+        /* Values read from Super-I/O config space */
+        u8 vid_value;
+};
+
 /* For each registered chip, we need to keep some data in memory.
    The structure is dynamically allocated. */
 struct it87_data {
-        struct i2c_client client;
         struct class_device *class_dev;
         enum chips type;
 
+        unsigned short addr;
+        const char *name;
         struct mutex update_lock;
         char valid;             /* !=0 if following fields are valid */
         unsigned long last_updated;     /* In jiffies */
@@ -247,26 +251,25 @@ struct it87_data {
 };
 
 
-static int it87_detect(struct i2c_adapter *adapter);
-static int it87_detach_client(struct i2c_client *client);
+static int it87_probe(struct platform_device *pdev);
+static int it87_remove(struct platform_device *pdev);
 
-static int it87_read_value(struct i2c_client *client, u8 reg);
-static void it87_write_value(struct i2c_client *client, u8 reg, u8 value);
+static int it87_read_value(struct it87_data *data, u8 reg);
+static void it87_write_value(struct it87_data *data, u8 reg, u8 value);
 static struct it87_data *it87_update_device(struct device *dev);
-static int it87_check_pwm(struct i2c_client *client);
-static void it87_init_client(struct i2c_client *client, struct it87_data *data);
+static int it87_check_pwm(struct device *dev);
+static void it87_init_device(struct platform_device *pdev);
 
 
-static struct i2c_driver it87_isa_driver = {
+static struct platform_driver it87_driver = {
         .driver = {
                 .owner  = THIS_MODULE,
-                .name   = "it87-isa",
+                .name   = DRVNAME,
         },
-        .attach_adapter = it87_detect,
-        .detach_client  = it87_detach_client,
+        .probe  = it87_probe,
+        .remove = __devexit_p(it87_remove),
 };
 
-
 static ssize_t show_in(struct device *dev, struct device_attribute *attr,
                 char *buf)
 {
@@ -303,13 +306,12 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
 
-        struct i2c_client *client = to_i2c_client(dev);
-        struct it87_data *data = i2c_get_clientdata(client);
+        struct it87_data *data = dev_get_drvdata(dev);
         unsigned long val = simple_strtoul(buf, NULL, 10);
 
         mutex_lock(&data->update_lock);
         data->in_min[nr] = IN_TO_REG(val);
-        it87_write_value(client, IT87_REG_VIN_MIN(nr), 
+        it87_write_value(data, IT87_REG_VIN_MIN(nr),
                         data->in_min[nr]);
         mutex_unlock(&data->update_lock);
         return count;
@@ -320,13 +322,12 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
 
-        struct i2c_client *client = to_i2c_client(dev);
-        struct it87_data *data = i2c_get_clientdata(client);
+        struct it87_data *data = dev_get_drvdata(dev);
         unsigned long val = simple_strtoul(buf, NULL, 10);
 
         mutex_lock(&data->update_lock);
         data->in_max[nr] = IN_TO_REG(val);
-        it87_write_value(client, IT87_REG_VIN_MAX(nr), 
+        it87_write_value(data, IT87_REG_VIN_MAX(nr),
                         data->in_max[nr]);
         mutex_unlock(&data->update_lock);
         return count;
@@ -394,13 +395,12 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
 
-        struct i2c_client *client = to_i2c_client(dev);
-        struct it87_data *data = i2c_get_clientdata(client);
+        struct it87_data *data = dev_get_drvdata(dev);
         int val = simple_strtol(buf, NULL, 10);
 
         mutex_lock(&data->update_lock);
         data->temp_high[nr] = TEMP_TO_REG(val);
-        it87_write_value(client, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]);
+        it87_write_value(data, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]);
         mutex_unlock(&data->update_lock);
         return count;
 }
@@ -410,13 +410,12 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
 
-        struct i2c_client *client = to_i2c_client(dev);
-        struct it87_data *data = i2c_get_clientdata(client);
+        struct it87_data *data = dev_get_drvdata(dev);
         int val = simple_strtol(buf, NULL, 10);
 
         mutex_lock(&data->update_lock);
         data->temp_low[nr] = TEMP_TO_REG(val);
-        it87_write_value(client, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]);
+        it87_write_value(data, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]);
         mutex_unlock(&data->update_lock);
         return count;
 }
@@ -453,8 +452,7 @@ static ssize_t set_sensor(struct device *dev, struct device_attribute *attr,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
 
-        struct i2c_client *client = to_i2c_client(dev);
-        struct it87_data *data = i2c_get_clientdata(client);
+        struct it87_data *data = dev_get_drvdata(dev);
         int val = simple_strtol(buf, NULL, 10);
 
         mutex_lock(&data->update_lock);
@@ -470,7 +468,7 @@ static ssize_t set_sensor(struct device *dev, struct device_attribute *attr,
                 mutex_unlock(&data->update_lock);
                 return -EINVAL;
         }
-        it87_write_value(client, IT87_REG_TEMP_ENABLE, data->sensor);
+        it87_write_value(data, IT87_REG_TEMP_ENABLE, data->sensor);
         mutex_unlock(&data->update_lock);
         return count;
 }
@@ -544,13 +542,12 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
 
-        struct i2c_client *client = to_i2c_client(dev);
-        struct it87_data *data = i2c_get_clientdata(client);
+        struct it87_data *data = dev_get_drvdata(dev);
         int val = simple_strtol(buf, NULL, 10);
         u8 reg;
 
         mutex_lock(&data->update_lock);
-        reg = it87_read_value(client, IT87_REG_FAN_DIV);
+        reg = it87_read_value(data, IT87_REG_FAN_DIV);
         switch (nr) {
         case 0: data->fan_div[nr] = reg & 0x07; break;
         case 1: data->fan_div[nr] = (reg >> 3) & 0x07; break;
@@ -558,7 +555,7 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
         }
 
         data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
-        it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]);
+        it87_write_value(data, IT87_REG_FAN_MIN(nr), data->fan_min[nr]);
         mutex_unlock(&data->update_lock);
         return count;
 }
@@ -568,14 +565,13 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
 
-        struct i2c_client *client = to_i2c_client(dev);
-        struct it87_data *data = i2c_get_clientdata(client);
+        struct it87_data *data = dev_get_drvdata(dev);
         unsigned long val = simple_strtoul(buf, NULL, 10);
         int min;
         u8 old;
 
         mutex_lock(&data->update_lock);
-        old = it87_read_value(client, IT87_REG_FAN_DIV);
+        old = it87_read_value(data, IT87_REG_FAN_DIV);
 
         /* Save fan min limit */
         min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr]));
@@ -596,11 +592,11 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
         val |= (data->fan_div[1] & 0x07) << 3;
         if (data->fan_div[2] == 3)
                 val |= 0x1 << 6;
-        it87_write_value(client, IT87_REG_FAN_DIV, val);
+        it87_write_value(data, IT87_REG_FAN_DIV, val);
 
         /* Restore fan min limit */
         data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
-        it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]);
+        it87_write_value(data, IT87_REG_FAN_MIN(nr), data->fan_min[nr]);
 
         mutex_unlock(&data->update_lock);
         return count;
@@ -611,8 +607,7 @@ static ssize_t set_pwm_enable(struct device *dev,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
 
-        struct i2c_client *client = to_i2c_client(dev);
-        struct it87_data *data = i2c_get_clientdata(client);
+        struct it87_data *data = dev_get_drvdata(dev);
         int val = simple_strtol(buf, NULL, 10);
 
         mutex_lock(&data->update_lock);
@@ -620,17 +615,17 @@ static ssize_t set_pwm_enable(struct device *dev,
         if (val == 0) {
                 int tmp;
                 /* make sure the fan is on when in on/off mode */
-                tmp = it87_read_value(client, IT87_REG_FAN_CTL);
-                it87_write_value(client, IT87_REG_FAN_CTL, tmp | (1 << nr));
+                tmp = it87_read_value(data, IT87_REG_FAN_CTL);
+                it87_write_value(data, IT87_REG_FAN_CTL, tmp | (1 << nr));
                 /* set on/off mode */
                 data->fan_main_ctrl &= ~(1 << nr);
-                it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+                it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
         } else if (val == 1) {
                 /* set SmartGuardian mode */
                 data->fan_main_ctrl |= (1 << nr);
-                it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+                it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
                 /* set saved pwm value, clear FAN_CTLX PWM mode bit */
-                it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
+                it87_write_value(data, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
         } else {
                 mutex_unlock(&data->update_lock);
                 return -EINVAL;
@@ -645,8 +640,7 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
 
-        struct i2c_client *client = to_i2c_client(dev);
-        struct it87_data *data = i2c_get_clientdata(client);
+        struct it87_data *data = dev_get_drvdata(dev);
         int val = simple_strtol(buf, NULL, 10);
 
         if (val < 0 || val > 255)
@@ -655,15 +649,14 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
         mutex_lock(&data->update_lock);
         data->manual_pwm_ctl[nr] = val;
         if (data->fan_main_ctrl & (1 << nr))
-                it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
+                it87_write_value(data, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
         mutex_unlock(&data->update_lock);
         return count;
 }
 static ssize_t set_pwm_freq(struct device *dev,
                 struct device_attribute *attr, const char *buf, size_t count)
 {
-        struct i2c_client *client = to_i2c_client(dev);
-        struct it87_data *data = i2c_get_clientdata(client);
+        struct it87_data *data = dev_get_drvdata(dev);
         unsigned long val = simple_strtoul(buf, NULL, 10);
         int i;
 
@@ -674,9 +667,9 @@ static ssize_t set_pwm_freq(struct device *dev,
         }
 
         mutex_lock(&data->update_lock);
-        data->fan_ctl = it87_read_value(client, IT87_REG_FAN_CTL) & 0x8f;
+        data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL) & 0x8f;
         data->fan_ctl |= i << 4;
-        it87_write_value(client, IT87_REG_FAN_CTL, data->fan_ctl);
+        it87_write_value(data, IT87_REG_FAN_CTL, data->fan_ctl);
         mutex_unlock(&data->update_lock);
 
         return count;
@@ -731,15 +724,14 @@ static ssize_t set_fan16_min(struct device *dev, struct device_attribute *attr,
 {
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
-        struct i2c_client *client = to_i2c_client(dev);
-        struct it87_data *data = i2c_get_clientdata(client);
+        struct it87_data *data = dev_get_drvdata(dev);
         int val = simple_strtol(buf, NULL, 10);
 
         mutex_lock(&data->update_lock);
         data->fan_min[nr] = FAN16_TO_REG(val);
-        it87_write_value(client, IT87_REG_FAN_MIN(nr),
+        it87_write_value(data, IT87_REG_FAN_MIN(nr),
                          data->fan_min[nr] & 0xff);
-        it87_write_value(client, IT87_REG_FANX_MIN(nr),
+        it87_write_value(data, IT87_REG_FANX_MIN(nr),
                          data->fan_min[nr] >> 8);
         mutex_unlock(&data->update_lock);
         return count;
@@ -777,8 +769,7 @@ show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
 static ssize_t
 store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
-        struct i2c_client *client = to_i2c_client(dev);
-        struct it87_data *data = i2c_get_clientdata(client);
+        struct it87_data *data = dev_get_drvdata(dev);
         u32 val;
 
         val = simple_strtoul(buf, NULL, 10);
@@ -796,6 +787,14 @@ show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
 }
 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
 
+static ssize_t show_name(struct device *dev, struct device_attribute
+                         *devattr, char *buf)
+{
+        struct it87_data *data = dev_get_drvdata(dev);
+        return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
 static struct attribute *it87_attributes[] = {
         &sensor_dev_attr_in0_input.dev_attr.attr,
         &sensor_dev_attr_in1_input.dev_attr.attr,
@@ -837,6 +836,7 @@ static struct attribute *it87_attributes[] = {
         &sensor_dev_attr_temp3_type.dev_attr.attr,
 
         &dev_attr_alarms.attr,
+        &dev_attr_name.attr,
         NULL
 };
 
@@ -879,18 +879,36 @@ static const struct attribute_group it87_group_opt = {
 };
 
 /* SuperIO detection - will change isa_address if a chip is found */
-static int __init it87_find(unsigned short *address)
+static int __init it87_find(unsigned short *address,
+        struct it87_sio_data *sio_data)
 {
         int err = -ENODEV;
+        u16 chip_type;
 
         superio_enter();
         chip_type = superio_inw(DEVID);
-        if (chip_type != IT8712F_DEVID
-         && chip_type != IT8716F_DEVID
-         && chip_type != IT8726F_DEVID
-         && chip_type != IT8718F_DEVID
-         && chip_type != IT8705F_DEVID)
-                goto exit;
+
+        switch (chip_type) {
+        case IT8705F_DEVID:
+                sio_data->type = it87;
+                break;
+        case IT8712F_DEVID:
+                sio_data->type = it8712;
+                break;
+        case IT8716F_DEVID:
+        case IT8726F_DEVID:
+                sio_data->type = it8716;
+                break;
+        case IT8718F_DEVID:
+                sio_data->type = it8718;
+                break;
+        case 0xffff:    /* No device at all */
+                goto exit;
+        default:
+                pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%x)\n",
+                         chip_type);
+                goto exit;
+        }
 
         superio_select(PME);
         if (!(superio_inb(IT87_ACT_REG) & 0x01)) {
@@ -914,7 +932,7 @@ static int __init it87_find(unsigned short *address)
 
                 superio_select(GPIO);
                 if (chip_type == it8718)
-                        vid_value = superio_inb(IT87_SIO_VID_REG);
+                        sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
 
                 reg = superio_inb(IT87_SIO_PINX2_REG);
                 if (reg & (1 << 0))
@@ -928,18 +946,26 @@ exit:
         return err;
 }
 
-/* This function is called by i2c_probe */
-static int it87_detect(struct i2c_adapter *adapter)
+static int __devinit it87_probe(struct platform_device *pdev)
 {
-        struct i2c_client *new_client;
         struct it87_data *data;
+        struct resource *res;
+        struct device *dev = &pdev->dev;
+        struct it87_sio_data *sio_data = dev->platform_data;
         int err = 0;
-        const char *name;
         int enable_pwm_interface;
-
-        /* Reserve the ISA region */
-        if (!request_region(isa_address, IT87_EXTENT,
-                            it87_isa_driver.driver.name)){
+        static const char *names[] = {
+                "it87",
+                "it8712",
+                "it8716",
+                "it8718",
+        };
+
+        res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+        if (!request_region(res->start, IT87_EXTENT, DRVNAME)) {
+                dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
+                        (unsigned long)res->start,
+                        (unsigned long)(res->start + IT87_EXTENT - 1));
                 err = -EBUSY;
                 goto ERROR0;
         }
@@ -949,131 +975,104 @@ static int it87_detect(struct i2c_adapter *adapter)
                 goto ERROR1;
         }
 
-        new_client = &data->client;
-        i2c_set_clientdata(new_client, data);
-        new_client->addr = isa_address;
-        new_client->adapter = adapter;
-        new_client->driver = &it87_isa_driver;
+        data->addr = res->start;
+        data->type = sio_data->type;
+        data->name = names[sio_data->type];
 
         /* Now, we do the remaining detection. */
-        if ((it87_read_value(new_client, IT87_REG_CONFIG) & 0x80)
-         || it87_read_value(new_client, IT87_REG_CHIPID) != 0x90) {
+        if ((it87_read_value(data, IT87_REG_CONFIG) & 0x80)
+         || it87_read_value(data, IT87_REG_CHIPID) != 0x90) {
                 err = -ENODEV;
                 goto ERROR2;
         }
 
-        /* Determine the chip type. */
-        switch (chip_type) {
-        case IT8712F_DEVID:
-                data->type = it8712;
-                name = "it8712";
-                break;
-        case IT8726F_DEVID:
-        /* fall through */
-        case IT8716F_DEVID:
-                data->type = it8716;
-                name = "it8716";
-                break;
-        case IT8718F_DEVID:
-                data->type = it8718;
-                name = "it8718";
-                break;
-        default:
-                data->type = it87;
-                name = "it87";
-        }
+        platform_set_drvdata(pdev, data);
 
-        /* Fill in the remaining client fields and put it into the global list */
-        strlcpy(new_client->name, name, I2C_NAME_SIZE);
         mutex_init(&data->update_lock);
 
-        /* Tell the I2C layer a new client has arrived */
-        if ((err = i2c_attach_client(new_client)))
-                goto ERROR2;
-
         /* Check PWM configuration */
-        enable_pwm_interface = it87_check_pwm(new_client);
+        enable_pwm_interface = it87_check_pwm(dev);
 
         /* Initialize the IT87 chip */
-        it87_init_client(new_client, data);
+        it87_init_device(pdev);
 
         /* Register sysfs hooks */
-        if ((err = sysfs_create_group(&new_client->dev.kobj, &it87_group)))
-                goto ERROR3;
+        if ((err = sysfs_create_group(&dev->kobj, &it87_group)))
+                goto ERROR2;
 
         /* Do not create fan files for disabled fans */
         if (data->type == it8716 || data->type == it8718) {
                 /* 16-bit tachometers */
                 if (data->has_fan & (1 << 0)) {
-                        if ((err = device_create_file(&new_client->dev,
+                        if ((err = device_create_file(dev,
                              &sensor_dev_attr_fan1_input16.dev_attr))
-                         || (err = device_create_file(&new_client->dev,
+                         || (err = device_create_file(dev,
                              &sensor_dev_attr_fan1_min16.dev_attr)))
                                 goto ERROR4;
                 }
                 if (data->has_fan & (1 << 1)) {
-                        if ((err = device_create_file(&new_client->dev,
+                        if ((err = device_create_file(dev,
                              &sensor_dev_attr_fan2_input16.dev_attr))
-                         || (err = device_create_file(&new_client->dev,
+                         || (err = device_create_file(dev,
                              &sensor_dev_attr_fan2_min16.dev_attr)))
                                 goto ERROR4;
                 }
                 if (data->has_fan & (1 << 2)) {
-                        if ((err = device_create_file(&new_client->dev,
+                        if ((err = device_create_file(dev,
                              &sensor_dev_attr_fan3_input16.dev_attr))
-                         || (err = device_create_file(&new_client->dev,
+                         || (err = device_create_file(dev,
                              &sensor_dev_attr_fan3_min16.dev_attr)))
                                 goto ERROR4;
                 }
         } else {
                 /* 8-bit tachometers with clock divider */
                 if (data->has_fan & (1 << 0)) {
-                        if ((err = device_create_file(&new_client->dev,
+                        if ((err = device_create_file(dev,
                              &sensor_dev_attr_fan1_input.dev_attr))
-                         || (err = device_create_file(&new_client->dev,
+                         || (err = device_create_file(dev,
                              &sensor_dev_attr_fan1_min.dev_attr))
-                         || (err = device_create_file(&new_client->dev,
+                         || (err = device_create_file(dev,
                              &sensor_dev_attr_fan1_div.dev_attr)))
                                 goto ERROR4;
                 }
                 if (data->has_fan & (1 << 1)) {
-                        if ((err = device_create_file(&new_client->dev,
+                        if ((err = device_create_file(dev,
                              &sensor_dev_attr_fan2_input.dev_attr))
-                         || (err = device_create_file(&new_client->dev,
+                         || (err = device_create_file(dev,
                              &sensor_dev_attr_fan2_min.dev_attr))
-                         || (err = device_create_file(&new_client->dev,
+                         || (err = device_create_file(dev,
                              &sensor_dev_attr_fan2_div.dev_attr)))
                                 goto ERROR4;
                 }
                 if (data->has_fan & (1 << 2)) {
-                        if ((err = device_create_file(&new_client->dev,
+                        if ((err = device_create_file(dev,
                              &sensor_dev_attr_fan3_input.dev_attr))
-                         || (err = device_create_file(&new_client->dev,
+                         || (err = device_create_file(dev,
                              &sensor_dev_attr_fan3_min.dev_attr))
-                         || (err = device_create_file(&new_client->dev,
+                         || (err = device_create_file(dev,
                              &sensor_dev_attr_fan3_div.dev_attr)))
                                 goto ERROR4;
                 }
         }
 
         if (enable_pwm_interface) {
-                if ((err = device_create_file(&new_client->dev,
+                if ((err = device_create_file(dev,
                      &sensor_dev_attr_pwm1_enable.dev_attr))
-                 || (err = device_create_file(&new_client->dev,
+                 || (err = device_create_file(dev,
                      &sensor_dev_attr_pwm2_enable.dev_attr))
-                 || (err = device_create_file(&new_client->dev,
+                 || (err = device_create_file(dev,
                      &sensor_dev_attr_pwm3_enable.dev_attr))
-                 || (err = device_create_file(&new_client->dev,
+                 || (err = device_create_file(dev,
                      &sensor_dev_attr_pwm1.dev_attr))
-                 || (err = device_create_file(&new_client->dev,
+                 || (err = device_create_file(dev,
                      &sensor_dev_attr_pwm2.dev_attr))
-                 || (err = device_create_file(&new_client->dev,
+                 || (err = device_create_file(dev,
                      &sensor_dev_attr_pwm3.dev_attr))
-                 || (err = device_create_file(&new_client->dev,
+                 || (err = device_create_file(dev,
                      &dev_attr_pwm1_freq))
-                 || (err = device_create_file(&new_client->dev,
+                 || (err = device_create_file(dev,
                      &dev_attr_pwm2_freq))
-                 || (err = device_create_file(&new_client->dev,
+                 || (err = device_create_file(dev,
                      &dev_attr_pwm3_freq)))
                         goto ERROR4;
         }
@@ -1082,15 +1081,15 @@ static int it87_detect(struct i2c_adapter *adapter)
          || data->type == it8718) {
                 data->vrm = vid_which_vrm();
                 /* VID reading from Super-I/O config space if available */
-                data->vid = vid_value;
-                if ((err = device_create_file(&new_client->dev,
+                data->vid = sio_data->vid_value;
+                if ((err = device_create_file(dev,
                      &dev_attr_vrm))
-                 || (err = device_create_file(&new_client->dev,
+                 || (err = device_create_file(dev,
                      &dev_attr_cpu0_vid)))
                         goto ERROR4;
         }
 
-        data->class_dev = hwmon_device_register(&new_client->dev);
+        data->class_dev = hwmon_device_register(dev);
         if (IS_ERR(data->class_dev)) {
                 err = PTR_ERR(data->class_dev);
                 goto ERROR4;
@@ -1099,31 +1098,27 @@ static int it87_detect(struct i2c_adapter *adapter)
         return 0;
 
 ERROR4:
-        sysfs_remove_group(&new_client->dev.kobj, &it87_group);
-        sysfs_remove_group(&new_client->dev.kobj, &it87_group_opt);
-ERROR3:
-        i2c_detach_client(new_client);
+        sysfs_remove_group(&dev->kobj, &it87_group);
+        sysfs_remove_group(&dev->kobj, &it87_group_opt);
 ERROR2:
+        platform_set_drvdata(pdev, NULL);
         kfree(data);
 ERROR1:
-        release_region(isa_address, IT87_EXTENT);
+        release_region(res->start, IT87_EXTENT);
 ERROR0:
         return err;
 }
 
-static int it87_detach_client(struct i2c_client *client)
+static int __devexit it87_remove(struct platform_device *pdev)
 {
-        struct it87_data *data = i2c_get_clientdata(client);
-        int err;
+        struct it87_data *data = platform_get_drvdata(pdev);
 
         hwmon_device_unregister(data->class_dev);
-        sysfs_remove_group(&client->dev.kobj, &it87_group);
-        sysfs_remove_group(&client->dev.kobj, &it87_group_opt);
+        sysfs_remove_group(&pdev->dev.kobj, &it87_group);
+        sysfs_remove_group(&pdev->dev.kobj, &it87_group_opt);
 
-        if ((err = i2c_detach_client(client)))
-                return err;
-
-        release_region(client->addr, IT87_EXTENT);
+        release_region(data->addr, IT87_EXTENT);
+        platform_set_drvdata(pdev, NULL);
         kfree(data);
 
         return 0;
@@ -1132,28 +1127,29 @@ static int it87_detach_client(struct i2c_client *client)
 /* Must be called with data->update_lock held, except during initialization.
    We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
    would slow down the IT87 access and should not be necessary. */
-static int it87_read_value(struct i2c_client *client, u8 reg)
+static int it87_read_value(struct it87_data *data, u8 reg)
 {
-        outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
-        return inb_p(client->addr + IT87_DATA_REG_OFFSET);
+        outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
+        return inb_p(data->addr + IT87_DATA_REG_OFFSET);
 }
 
 /* Must be called with data->update_lock held, except during initialization.
    We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
    would slow down the IT87 access and should not be necessary. */
-static void it87_write_value(struct i2c_client *client, u8 reg, u8 value)
+static void it87_write_value(struct it87_data *data, u8 reg, u8 value)
 {
-        outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
-        outb_p(value, client->addr + IT87_DATA_REG_OFFSET);
+        outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
+        outb_p(value, data->addr + IT87_DATA_REG_OFFSET);
 }
 
 /* Return 1 if and only if the PWM interface is safe to use */
-static int it87_check_pwm(struct i2c_client *client)
+static int __devinit it87_check_pwm(struct device *dev)
 {
+        struct it87_data *data = dev_get_drvdata(dev);
         /* Some BIOSes fail to correctly configure the IT87 fans. All fans off
          * and polarity set to active low is sign that this is the case so we
          * disable pwm control to protect the user. */
-        int tmp = it87_read_value(client, IT87_REG_FAN_CTL);
+        int tmp = it87_read_value(data, IT87_REG_FAN_CTL);
         if ((tmp & 0x87) == 0) {
                 if (fix_pwm_polarity) {
                         /* The user asks us to attempt a chip reconfiguration.
@@ -1163,7 +1159,7 @@ static int it87_check_pwm(struct i2c_client *client)
                         u8 pwm[3];
 
                         for (i = 0; i < 3; i++)
-                                pwm[i] = it87_read_value(client,
+                                pwm[i] = it87_read_value(data,
                                                          IT87_REG_PWM(i));
 
                         /* If any fan is in automatic pwm mode, the polarity
@@ -1171,26 +1167,26 @@ static int it87_check_pwm(struct i2c_client *client)
                          * better don't change anything (but still disable the
                          * PWM interface). */
                         if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) {
-                                dev_info(&client->dev, "Reconfiguring PWM to "
+                                dev_info(dev, "Reconfiguring PWM to "
                                          "active high polarity\n");
-                                it87_write_value(client, IT87_REG_FAN_CTL,
+                                it87_write_value(data, IT87_REG_FAN_CTL,
                                                  tmp | 0x87);
                                 for (i = 0; i < 3; i++)
-                                        it87_write_value(client,
+                                        it87_write_value(data,
                                                          IT87_REG_PWM(i),
                                                          0x7f & ~pwm[i]);
                                 return 1;
                         }
 
-                        dev_info(&client->dev, "PWM configuration is "
+                        dev_info(dev, "PWM configuration is "
                                  "too broken to be fixed\n");
                 }
 
-                dev_info(&client->dev, "Detected broken BIOS "
+                dev_info(dev, "Detected broken BIOS "
                          "defaults, disabling PWM interface\n");
                 return 0;
         } else if (fix_pwm_polarity) {
-                dev_info(&client->dev, "PWM configuration looks "
+                dev_info(dev, "PWM configuration looks "
                          "sane, won't touch\n");
         }
 
@@ -1198,8 +1194,9 @@ static int it87_check_pwm(struct i2c_client *client)
 }
 
 /* Called when we have found a new IT87. */
-static void it87_init_client(struct i2c_client *client, struct it87_data *data)
+static void __devinit it87_init_device(struct platform_device *pdev)
 {
+        struct it87_data *data = platform_get_drvdata(pdev);
         int tmp, i;
 
         /* initialize to sane defaults:
@@ -1219,48 +1216,48 @@ static void it87_init_client(struct i2c_client *client, struct it87_data *data)
          * means -1 degree C, which surprisingly doesn't trigger an alarm,
          * but is still confusing, so change to 127 degrees C. */
         for (i = 0; i < 8; i++) {
-                tmp = it87_read_value(client, IT87_REG_VIN_MIN(i));
+                tmp = it87_read_value(data, IT87_REG_VIN_MIN(i));
                 if (tmp == 0xff)
-                        it87_write_value(client, IT87_REG_VIN_MIN(i), 0);
+                        it87_write_value(data, IT87_REG_VIN_MIN(i), 0);
         }
         for (i = 0; i < 3; i++) {
-                tmp = it87_read_value(client, IT87_REG_TEMP_HIGH(i));
+                tmp = it87_read_value(data, IT87_REG_TEMP_HIGH(i));
                 if (tmp == 0xff)
-                        it87_write_value(client, IT87_REG_TEMP_HIGH(i), 127);
+                        it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127);
         }
 
         /* Check if temperature channnels are reset manually or by some reason */
-        tmp = it87_read_value(client, IT87_REG_TEMP_ENABLE);
+        tmp = it87_read_value(data, IT87_REG_TEMP_ENABLE);
         if ((tmp & 0x3f) == 0) {
                 /* Temp1,Temp3=thermistor; Temp2=thermal diode */
                 tmp = (tmp & 0xc0) | 0x2a;
-                it87_write_value(client, IT87_REG_TEMP_ENABLE, tmp);
+                it87_write_value(data, IT87_REG_TEMP_ENABLE, tmp);
         }
         data->sensor = tmp;
 
         /* Check if voltage monitors are reset manually or by some reason */
-        tmp = it87_read_value(client, IT87_REG_VIN_ENABLE);
+        tmp = it87_read_value(data, IT87_REG_VIN_ENABLE);
         if ((tmp & 0xff) == 0) {
                 /* Enable all voltage monitors */
-                it87_write_value(client, IT87_REG_VIN_ENABLE, 0xff);
+                it87_write_value(data, IT87_REG_VIN_ENABLE, 0xff);
         }
 
         /* Check if tachometers are reset manually or by some reason */
-        data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL);
+        data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL);
         if ((data->fan_main_ctrl & 0x70) == 0) {
                 /* Enable all fan tachometers */
                 data->fan_main_ctrl |= 0x70;
-                it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+                it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
         }
         data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
 
         /* Set tachometers to 16-bit mode if needed */
         if (data->type == it8716 || data->type == it8718) {
-                tmp = it87_read_value(client, IT87_REG_FAN_16BIT);
+                tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
                 if (~tmp & 0x07 & data->has_fan) {
-                        dev_dbg(&client->dev,
+                        dev_dbg(&pdev->dev,
                                 "Setting fan1-3 to 16-bit mode\n");
-                        it87_write_value(client, IT87_REG_FAN_16BIT,
+                        it87_write_value(data, IT87_REG_FAN_16BIT,
                                          tmp | 0x07);
                 }
         }
@@ -1270,7 +1267,7 @@ static void it87_init_client(struct i2c_client *client, struct it87_data *data)
         for (i = 0; i < 3; i++) {
                 if (data->fan_main_ctrl & (1 << i)) {
                         /* pwm mode */
-                        tmp = it87_read_value(client, IT87_REG_PWM(i));
+                        tmp = it87_read_value(data, IT87_REG_PWM(i));
                         if (tmp & 0x80) {
                                 /* automatic pwm - not yet implemented, but
                                  * leave the settings made by the BIOS alone
@@ -1284,15 +1281,14 @@ static void it87_init_client(struct i2c_client *client, struct it87_data *data)
         }
 
         /* Start monitoring */
-        it87_write_value(client, IT87_REG_CONFIG,
-                         (it87_read_value(client, IT87_REG_CONFIG) & 0x36)
+        it87_write_value(data, IT87_REG_CONFIG,
+                         (it87_read_value(data, IT87_REG_CONFIG) & 0x36)
                          | (update_vbat ? 0x41 : 0x01));
 }
 
 static struct it87_data *it87_update_device(struct device *dev)
 {
-        struct i2c_client *client = to_i2c_client(dev);
-        struct it87_data *data = i2c_get_clientdata(client);
+        struct it87_data *data = dev_get_drvdata(dev);
         int i;
 
         mutex_lock(&data->update_lock);
@@ -1303,20 +1299,20 @@ static struct it87_data *it87_update_device(struct device *dev)
                 if (update_vbat) {
                         /* Cleared after each update, so reenable.  Value
                           returned by this read will be previous value */       
-                        it87_write_value(client, IT87_REG_CONFIG,
-                           it87_read_value(client, IT87_REG_CONFIG) | 0x40);
+                        it87_write_value(data, IT87_REG_CONFIG,
+                           it87_read_value(data, IT87_REG_CONFIG) | 0x40);
                 }
                 for (i = 0; i <= 7; i++) {
                         data->in[i] =
-                            it87_read_value(client, IT87_REG_VIN(i));
+                            it87_read_value(data, IT87_REG_VIN(i));
                         data->in_min[i] =
-                            it87_read_value(client, IT87_REG_VIN_MIN(i));
+                            it87_read_value(data, IT87_REG_VIN_MIN(i));
                         data->in_max[i] =
-                            it87_read_value(client, IT87_REG_VIN_MAX(i));
+                            it87_read_value(data, IT87_REG_VIN_MAX(i));
                 }
                 /* in8 (battery) has no limit registers */
                 data->in[8] =
-                    it87_read_value(client, IT87_REG_VIN(8));
+                    it87_read_value(data, IT87_REG_VIN(8));
 
                 for (i = 0; i < 3; i++) {
                         /* Skip disabled fans */
@@ -1324,46 +1320,47 @@ static struct it87_data *it87_update_device(struct device *dev)
                                 continue;
 
                         data->fan_min[i] =
-                            it87_read_value(client, IT87_REG_FAN_MIN(i));
-                        data->fan[i] = it87_read_value(client,
+                            it87_read_value(data, IT87_REG_FAN_MIN(i));
+                        data->fan[i] = it87_read_value(data,
                                        IT87_REG_FAN(i));
                         /* Add high byte if in 16-bit mode */
                         if (data->type == it8716 || data->type == it8718) {
-                                data->fan[i] |= it87_read_value(client,
+                                data->fan[i] |= it87_read_value(data,
                                                 IT87_REG_FANX(i)) << 8;
-                                data->fan_min[i] |= it87_read_value(client,
+                                data->fan_min[i] |= it87_read_value(data,
                                                 IT87_REG_FANX_MIN(i)) << 8;
                         }
                 }
                 for (i = 0; i < 3; i++) {
                         data->temp[i] =
-                            it87_read_value(client, IT87_REG_TEMP(i));
+                            it87_read_value(data, IT87_REG_TEMP(i));
                         data->temp_high[i] =
-                            it87_read_value(client, IT87_REG_TEMP_HIGH(i));
+                            it87_read_value(data, IT87_REG_TEMP_HIGH(i));
                         data->temp_low[i] =
-                            it87_read_value(client, IT87_REG_TEMP_LOW(i));
+                            it87_read_value(data, IT87_REG_TEMP_LOW(i));
                 }
 
                 /* Newer chips don't have clock dividers */
                 if ((data->has_fan & 0x07) && data->type != it8716
                  && data->type != it8718) {
-                        i = it87_read_value(client, IT87_REG_FAN_DIV);
+                        i = it87_read_value(data, IT87_REG_FAN_DIV);
                         data->fan_div[0] = i & 0x07;
                         data->fan_div[1] = (i >> 3) & 0x07;
                         data->fan_div[2] = (i & 0x40) ? 3 : 1;
                 }
 
                 data->alarms =
-                        it87_read_value(client, IT87_REG_ALARM1) |
-                        (it87_read_value(client, IT87_REG_ALARM2) << 8) |
-                        (it87_read_value(client, IT87_REG_ALARM3) << 16);
-                data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL);
-                data->fan_ctl = it87_read_value(client, IT87_REG_FAN_CTL);
-
-                data->sensor = it87_read_value(client, IT87_REG_TEMP_ENABLE);
+                        it87_read_value(data, IT87_REG_ALARM1) |
+                        (it87_read_value(data, IT87_REG_ALARM2) << 8) |
+                        (it87_read_value(data, IT87_REG_ALARM3) << 16);
+                data->fan_main_ctrl = it87_read_value(data,
+                                IT87_REG_FAN_MAIN_CTRL);
+                data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL);
+
+                data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE);
                 /* The 8705 does not have VID capability */
                 if (data->type == it8712 || data->type == it8716) {
-                        data->vid = it87_read_value(client, IT87_REG_VID);
+                        data->vid = it87_read_value(data, IT87_REG_VID);
                         /* The older IT8712F revisions had only 5 VID pins,
                            but we assume it is always safe to read 6 bits. */
                         data->vid &= 0x3f;
@@ -1377,18 +1374,79 @@ static struct it87_data *it87_update_device(struct device *dev)
         return data;
 }
 
+static int __init it87_device_add(unsigned short address,
+                                  const struct it87_sio_data *sio_data)
+{
+        struct resource res = {
+                .start  = address ,
+                .end    = address + IT87_EXTENT - 1,
+                .name   = DRVNAME,
+                .flags  = IORESOURCE_IO,
+        };
+        int err;
+
+        pdev = platform_device_alloc(DRVNAME, address);
+        if (!pdev) {
+                err = -ENOMEM;
+                printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+                goto exit;
+        }
+
+        err = platform_device_add_resources(pdev, &res, 1);
+        if (err) {
+                printk(KERN_ERR DRVNAME ": Device resource addition failed "
+                       "(%d)\n", err);
+                goto exit_device_put;
+        }
+
+        err = platform_device_add_data(pdev, sio_data,
+                                       sizeof(struct it87_sio_data));
+        if (err) {
+                printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+                goto exit_device_put;
+        }
+
+        err = platform_device_add(pdev);
+        if (err) {
+                printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
+                       err);
+                goto exit_device_put;
+        }
+
+        return 0;
+
+exit_device_put:
+        platform_device_put(pdev);
+exit:
+        return err;
+}
+
 static int __init sm_it87_init(void)
 {
-        int res;
+        int err;
+        unsigned short isa_address=0;
+        struct it87_sio_data sio_data;
+
+        err = it87_find(&isa_address, &sio_data);
+        if (err)
+                return err;
+        err = platform_driver_register(&it87_driver);
+        if (err)
+                return err;
 
-        if ((res = it87_find(&isa_address)))
-                return res;
-        return i2c_isa_add_driver(&it87_isa_driver);
+        err = it87_device_add(isa_address, &sio_data);
+        if (err){
+                platform_driver_unregister(&it87_driver);
+                return err;
+        }
+
+        return 0;
 }
 
 static void __exit sm_it87_exit(void)
 {
-        i2c_isa_del_driver(&it87_isa_driver);
+        platform_device_unregister(pdev);
+        platform_driver_unregister(&it87_driver);
 }