3 files changed, 601 insertions, 0 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 3bd993b0a3c8..d4ffc6052083 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -467,6 +467,17 @@ config SENSORS_JC42
           This driver can also be built as a module.  If so, the module
           will be called jc42.
 
+config SENSORS_LINEAGE
+        tristate "Lineage Compact Power Line Power Entry Module"
+        depends on I2C && EXPERIMENTAL
+        help
+          If you say yes here you get support for the Lineage Compact Power Line
+          series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
+          CP2000DC, CP2725, and others.
+
+          This driver can also be built as a module.  If so, the module
+          will be called lineage-pem.
+
 config SENSORS_LM63
         tristate "National Semiconductor LM63 and LM64"
         depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index f69783150b76..46819818ef51 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_SENSORS_JC42)	+= jc42.o
 obj-$(CONFIG_SENSORS_JZ4740)    += jz4740-hwmon.o
 obj-$(CONFIG_SENSORS_K8TEMP)    += k8temp.o
 obj-$(CONFIG_SENSORS_K10TEMP)   += k10temp.o
+obj-$(CONFIG_SENSORS_LINEAGE)   += lineage-pem.o
 obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o
 obj-$(CONFIG_SENSORS_LIS3_SPI)  += lis3lv02d.o lis3lv02d_spi.o
 obj-$(CONFIG_SENSORS_LIS3_I2C)  += lis3lv02d.o lis3lv02d_i2c.o
diff --git a/drivers/hwmon/lineage-pem.c b/drivers/hwmon/lineage-pem.c
new file mode 100644
index 000000000000..d39ee24e52f6
--- /dev/null
+++ b/drivers/hwmon/lineage-pem.c
@@ -0,0 +1,589 @@
+/*
+ * Driver for Lineage Compact Power Line series of power entry modules.
+ *
+ * Copyright (C) 2010, 2011 Ericsson AB.
+ *
+ * Documentation:
+ *  http://www.lineagepower.com/oem/pdf/CPLI2C.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+/*
+ * This driver supports various Lineage Compact Power Line DC/DC and AC/DC
+ * converters such as CP1800, CP2000AC, CP2000DC, CP2100DC, and others.
+ *
+ * The devices are nominally PMBus compliant. However, most standard PMBus
+ * commands are not supported. Specifically, all hardware monitoring and
+ * status reporting commands are non-standard. For this reason, a standard
+ * PMBus driver can not be used.
+ *
+ * All Lineage CPL devices have a built-in I2C bus master selector (PCA9541).
+ * To ensure device access, this driver should only be used as client driver
+ * to the pca9541 I2C master selector driver.
+ */
+
+/* Command codes */
+#define PEM_OPERATION           0x01
+#define PEM_CLEAR_INFO_FLAGS    0x03
+#define PEM_VOUT_COMMAND        0x21
+#define PEM_VOUT_OV_FAULT_LIMIT 0x40
+#define PEM_READ_DATA_STRING    0xd0
+#define PEM_READ_INPUT_STRING   0xdc
+#define PEM_READ_FIRMWARE_REV   0xdd
+#define PEM_READ_RUN_TIMER      0xde
+#define PEM_FAN_HI_SPEED        0xdf
+#define PEM_FAN_NORMAL_SPEED    0xe0
+#define PEM_READ_FAN_SPEED      0xe1
+
+/* offsets in data string */
+#define PEM_DATA_STATUS_2       0
+#define PEM_DATA_STATUS_1       1
+#define PEM_DATA_ALARM_2        2
+#define PEM_DATA_ALARM_1        3
+#define PEM_DATA_VOUT_LSB       4
+#define PEM_DATA_VOUT_MSB       5
+#define PEM_DATA_CURRENT        6
+#define PEM_DATA_TEMP           7
+
+/* Virtual entries, to report constants */
+#define PEM_DATA_TEMP_MAX       10
+#define PEM_DATA_TEMP_CRIT      11
+
+/* offsets in input string */
+#define PEM_INPUT_VOLTAGE       0
+#define PEM_INPUT_POWER_LSB     1
+#define PEM_INPUT_POWER_MSB     2
+
+/* offsets in fan data */
+#define PEM_FAN_ADJUSTMENT      0
+#define PEM_FAN_FAN1            1
+#define PEM_FAN_FAN2            2
+#define PEM_FAN_FAN3            3
+
+/* Status register bits */
+#define STS1_OUTPUT_ON          (1 << 0)
+#define STS1_LEDS_FLASHING      (1 << 1)
+#define STS1_EXT_FAULT          (1 << 2)
+#define STS1_SERVICE_LED_ON     (1 << 3)
+#define STS1_SHUTDOWN_OCCURRED  (1 << 4)
+#define STS1_INT_FAULT          (1 << 5)
+#define STS1_ISOLATION_TEST_OK  (1 << 6)
+
+#define STS2_ENABLE_PIN_HI      (1 << 0)
+#define STS2_DATA_OUT_RANGE     (1 << 1)
+#define STS2_RESTARTED_OK       (1 << 1)
+#define STS2_ISOLATION_TEST_FAIL (1 << 3)
+#define STS2_HIGH_POWER_CAP     (1 << 4)
+#define STS2_INVALID_INSTR      (1 << 5)
+#define STS2_WILL_RESTART       (1 << 6)
+#define STS2_PEC_ERR            (1 << 7)
+
+/* Alarm register bits */
+#define ALRM1_VIN_OUT_LIMIT     (1 << 0)
+#define ALRM1_VOUT_OUT_LIMIT    (1 << 1)
+#define ALRM1_OV_VOLT_SHUTDOWN  (1 << 2)
+#define ALRM1_VIN_OVERCURRENT   (1 << 3)
+#define ALRM1_TEMP_WARNING      (1 << 4)
+#define ALRM1_TEMP_SHUTDOWN     (1 << 5)
+#define ALRM1_PRIMARY_FAULT     (1 << 6)
+#define ALRM1_POWER_LIMIT       (1 << 7)
+
+#define ALRM2_5V_OUT_LIMIT      (1 << 1)
+#define ALRM2_TEMP_FAULT        (1 << 2)
+#define ALRM2_OV_LOW            (1 << 3)
+#define ALRM2_DCDC_TEMP_HIGH    (1 << 4)
+#define ALRM2_PRI_TEMP_HIGH     (1 << 5)
+#define ALRM2_NO_PRIMARY        (1 << 6)
+#define ALRM2_FAN_FAULT         (1 << 7)
+
+#define FIRMWARE_REV_LEN        4
+#define DATA_STRING_LEN         9
+#define INPUT_STRING_LEN        5       /* 4 for most devices   */
+#define FAN_SPEED_LEN           5
+
+struct pem_data {
+        struct device *hwmon_dev;
+
+        struct mutex update_lock;
+        bool valid;
+        bool fans_supported;
+        int input_length;
+        unsigned long last_updated;     /* in jiffies */
+
+        u8 firmware_rev[FIRMWARE_REV_LEN];
+        u8 data_string[DATA_STRING_LEN];
+        u8 input_string[INPUT_STRING_LEN];
+        u8 fan_speed[FAN_SPEED_LEN];
+};
+
+static int pem_read_block(struct i2c_client *client, u8 command, u8 *data,
+                          int data_len)
+{
+        u8 block_buffer[I2C_SMBUS_BLOCK_MAX];
+        int result;
+
+        result = i2c_smbus_read_block_data(client, command, block_buffer);
+        if (unlikely(result < 0))
+                goto abort;
+        if (unlikely(result == 0xff || result != data_len)) {
+                result = -EIO;
+                goto abort;
+        }
+        memcpy(data, block_buffer, data_len);
+        result = 0;
+abort:
+        return result;
+}
+
+static struct pem_data *pem_update_device(struct device *dev)
+{
+        struct i2c_client *client = to_i2c_client(dev);
+        struct pem_data *data = i2c_get_clientdata(client);
+        struct pem_data *ret = data;
+
+        mutex_lock(&data->update_lock);
+
+        if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+                int result;
+
+                /* Read data string */
+                result = pem_read_block(client, PEM_READ_DATA_STRING,
+                                        data->data_string,
+                                        sizeof(data->data_string));
+                if (unlikely(result < 0)) {
+                        ret = ERR_PTR(result);
+                        goto abort;
+                }
+
+                /* Read input string */
+                if (data->input_length) {
+                        result = pem_read_block(client, PEM_READ_INPUT_STRING,
+                                                data->input_string,
+                                                data->input_length);
+                        if (unlikely(result < 0)) {
+                                ret = ERR_PTR(result);
+                                goto abort;
+                        }
+                }
+
+                /* Read fan speeds */
+                if (data->fans_supported) {
+                        result = pem_read_block(client, PEM_READ_FAN_SPEED,
+                                                data->fan_speed,
+                                                sizeof(data->fan_speed));
+                        if (unlikely(result < 0)) {
+                                ret = ERR_PTR(result);
+                                goto abort;
+                        }
+                }
+
+                i2c_smbus_write_byte(client, PEM_CLEAR_INFO_FLAGS);
+
+                data->last_updated = jiffies;
+                data->valid = 1;
+        }
+abort:
+        mutex_unlock(&data->update_lock);
+        return ret;
+}
+
+static long pem_get_data(u8 *data, int len, int index)
+{
+        long val;
+
+        switch (index) {
+        case PEM_DATA_VOUT_LSB:
+                val = (data[index] + (data[index+1] << 8)) * 5 / 2;
+                break;
+        case PEM_DATA_CURRENT:
+                val = data[index] * 200;
+                break;
+        case PEM_DATA_TEMP:
+                val = data[index] * 1000;
+                break;
+        case PEM_DATA_TEMP_MAX:
+                val = 97 * 1000;        /* 97 degrees C per datasheet */
+                break;
+        case PEM_DATA_TEMP_CRIT:
+                val = 107 * 1000;       /* 107 degrees C per datasheet */
+                break;
+        default:
+                WARN_ON_ONCE(1);
+                val = 0;
+        }
+        return val;
+}
+
+static long pem_get_input(u8 *data, int len, int index)
+{
+        long val;
+
+        switch (index) {
+        case PEM_INPUT_VOLTAGE:
+                if (len == INPUT_STRING_LEN)
+                        val = (data[index] + (data[index+1] << 8) - 75) * 1000;
+                else
+                        val = (data[index] - 75) * 1000;
+                break;
+        case PEM_INPUT_POWER_LSB:
+                if (len == INPUT_STRING_LEN)
+                        index++;
+                val = (data[index] + (data[index+1] << 8)) * 1000000L;
+                break;
+        default:
+                WARN_ON_ONCE(1);
+                val = 0;
+        }
+        return val;
+}
+
+static long pem_get_fan(u8 *data, int len, int index)
+{
+        long val;
+
+        switch (index) {
+        case PEM_FAN_FAN1:
+        case PEM_FAN_FAN2:
+        case PEM_FAN_FAN3:
+                val = data[index] * 100;
+                break;
+        default:
+                WARN_ON_ONCE(1);
+                val = 0;
+        }
+        return val;
+}
+
+/*
+ * Show boolean, either a fault or an alarm.
+ * .nr points to the register, .index is the bit mask to check
+ */
+static ssize_t pem_show_bool(struct device *dev,
+                             struct device_attribute *da, char *buf)
+{
+        struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(da);
+        struct pem_data *data = pem_update_device(dev);
+        u8 status;
+
+        if (IS_ERR(data))
+                return PTR_ERR(data);
+
+        status = data->data_string[attr->nr] & attr->index;
+        return snprintf(buf, PAGE_SIZE, "%d\n", !!status);
+}
+
+static ssize_t pem_show_data(struct device *dev, struct device_attribute *da,
+                             char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+        struct pem_data *data = pem_update_device(dev);
+        long value;
+
+        if (IS_ERR(data))
+                return PTR_ERR(data);
+
+        value = pem_get_data(data->data_string, sizeof(data->data_string),
+                             attr->index);
+
+        return snprintf(buf, PAGE_SIZE, "%ld\n", value);
+}
+
+static ssize_t pem_show_input(struct device *dev, struct device_attribute *da,
+                              char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+        struct pem_data *data = pem_update_device(dev);
+        long value;
+
+        if (IS_ERR(data))
+                return PTR_ERR(data);
+
+        value = pem_get_input(data->input_string, sizeof(data->input_string),
+                              attr->index);
+
+        return snprintf(buf, PAGE_SIZE, "%ld\n", value);
+}
+
+static ssize_t pem_show_fan(struct device *dev, struct device_attribute *da,
+                            char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+        struct pem_data *data = pem_update_device(dev);
+        long value;
+
+        if (IS_ERR(data))
+                return PTR_ERR(data);
+
+        value = pem_get_fan(data->fan_speed, sizeof(data->fan_speed),
+                            attr->index);
+
+        return snprintf(buf, PAGE_SIZE, "%ld\n", value);
+}
+
+/* Voltages */
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, pem_show_data, NULL,
+                          PEM_DATA_VOUT_LSB);
+static SENSOR_DEVICE_ATTR_2(in1_min_alarm, S_IRUGO, pem_show_bool, NULL,
+                            PEM_DATA_ALARM_2, ALRM2_OV_LOW);
+static SENSOR_DEVICE_ATTR_2(in1_max_alarm, S_IRUGO, pem_show_bool, NULL,
+                            PEM_DATA_ALARM_1, ALRM1_VOUT_OUT_LIMIT);
+static SENSOR_DEVICE_ATTR_2(in1_crit_alarm, S_IRUGO, pem_show_bool, NULL,
+                            PEM_DATA_ALARM_1, ALRM1_OV_VOLT_SHUTDOWN);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, pem_show_input, NULL,
+                          PEM_INPUT_VOLTAGE);
+static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, pem_show_bool, NULL,
+                            PEM_DATA_ALARM_1,
+                            ALRM1_VIN_OUT_LIMIT | ALRM1_PRIMARY_FAULT);
+
+/* Currents */
+static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, pem_show_data, NULL,
+                          PEM_DATA_CURRENT);
+static SENSOR_DEVICE_ATTR_2(curr1_alarm, S_IRUGO, pem_show_bool, NULL,
+                            PEM_DATA_ALARM_1, ALRM1_VIN_OVERCURRENT);
+
+/* Power */
+static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, pem_show_input, NULL,
+                          PEM_INPUT_POWER_LSB);
+static SENSOR_DEVICE_ATTR_2(power1_alarm, S_IRUGO, pem_show_bool, NULL,
+                            PEM_DATA_ALARM_1, ALRM1_POWER_LIMIT);
+
+/* Fans */
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, pem_show_fan, NULL,
+                          PEM_FAN_FAN1);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, pem_show_fan, NULL,
+                          PEM_FAN_FAN2);
+static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, pem_show_fan, NULL,
+                          PEM_FAN_FAN3);
+static SENSOR_DEVICE_ATTR_2(fan1_alarm, S_IRUGO, pem_show_bool, NULL,
+                            PEM_DATA_ALARM_2, ALRM2_FAN_FAULT);
+
+/* Temperatures */
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, pem_show_data, NULL,
+                          PEM_DATA_TEMP);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, pem_show_data, NULL,
+                          PEM_DATA_TEMP_MAX);
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, pem_show_data, NULL,
+                          PEM_DATA_TEMP_CRIT);
+static SENSOR_DEVICE_ATTR_2(temp1_alarm, S_IRUGO, pem_show_bool, NULL,
+                            PEM_DATA_ALARM_1, ALRM1_TEMP_WARNING);
+static SENSOR_DEVICE_ATTR_2(temp1_crit_alarm, S_IRUGO, pem_show_bool, NULL,
+                            PEM_DATA_ALARM_1, ALRM1_TEMP_SHUTDOWN);
+static SENSOR_DEVICE_ATTR_2(temp1_fault, S_IRUGO, pem_show_bool, NULL,
+                            PEM_DATA_ALARM_2, ALRM2_TEMP_FAULT);
+
+static struct attribute *pem_attributes[] = {
+        &sensor_dev_attr_in1_input.dev_attr.attr,
+        &sensor_dev_attr_in1_min_alarm.dev_attr.attr,
+        &sensor_dev_attr_in1_max_alarm.dev_attr.attr,
+        &sensor_dev_attr_in1_crit_alarm.dev_attr.attr,
+        &sensor_dev_attr_in2_alarm.dev_attr.attr,
+
+        &sensor_dev_attr_curr1_alarm.dev_attr.attr,
+
+        &sensor_dev_attr_power1_alarm.dev_attr.attr,
+
+        &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+
+        &sensor_dev_attr_temp1_input.dev_attr.attr,
+        &sensor_dev_attr_temp1_max.dev_attr.attr,
+        &sensor_dev_attr_temp1_crit.dev_attr.attr,
+        &sensor_dev_attr_temp1_alarm.dev_attr.attr,
+        &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+        &sensor_dev_attr_temp1_fault.dev_attr.attr,
+
+        NULL,
+};
+
+static const struct attribute_group pem_group = {
+        .attrs = pem_attributes,
+};
+
+static struct attribute *pem_input_attributes[] = {
+        &sensor_dev_attr_in2_input.dev_attr.attr,
+        &sensor_dev_attr_curr1_input.dev_attr.attr,
+        &sensor_dev_attr_power1_input.dev_attr.attr,
+};
+
+static const struct attribute_group pem_input_group = {
+        .attrs = pem_input_attributes,
+};
+
+static struct attribute *pem_fan_attributes[] = {
+        &sensor_dev_attr_fan1_input.dev_attr.attr,
+        &sensor_dev_attr_fan2_input.dev_attr.attr,
+        &sensor_dev_attr_fan3_input.dev_attr.attr,
+};
+
+static const struct attribute_group pem_fan_group = {
+        .attrs = pem_fan_attributes,
+};
+
+static int pem_probe(struct i2c_client *client,
+                     const struct i2c_device_id *id)
+{
+        struct i2c_adapter *adapter = client->adapter;
+        struct pem_data *data;
+        int ret;
+
+        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BLOCK_DATA
+                                     | I2C_FUNC_SMBUS_WRITE_BYTE))
+                return -ENODEV;
+
+        data = kzalloc(sizeof(*data), GFP_KERNEL);
+        if (!data)
+                return -ENOMEM;
+
+        i2c_set_clientdata(client, data);
+        mutex_init(&data->update_lock);
+
+        /*
+         * We use the next two commands to determine if the device is really
+         * there.
+         */
+        ret = pem_read_block(client, PEM_READ_FIRMWARE_REV,
+                             data->firmware_rev, sizeof(data->firmware_rev));
+        if (ret < 0)
+                goto out_kfree;
+
+        ret = i2c_smbus_write_byte(client, PEM_CLEAR_INFO_FLAGS);
+        if (ret < 0)
+                goto out_kfree;
+
+        dev_info(&client->dev, "Firmware revision %d.%d.%d\n",
+                 data->firmware_rev[0], data->firmware_rev[1],
+                 data->firmware_rev[2]);
+
+        /* Register sysfs hooks */
+        ret = sysfs_create_group(&client->dev.kobj, &pem_group);
+        if (ret)
+                goto out_kfree;
+
+        /*
+         * Check if input readings are supported.
+         * This is the case if we can read input data,
+         * and if the returned data is not all zeros.
+         * Note that input alarms are always supported.
+         */
+        ret = pem_read_block(client, PEM_READ_INPUT_STRING,
+                             data->input_string,
+                             sizeof(data->input_string) - 1);
+        if (!ret && (data->input_string[0] || data->input_string[1] ||
+                     data->input_string[2]))
+                data->input_length = sizeof(data->input_string) - 1;
+        else if (ret < 0) {
+                /* Input string is one byte longer for some devices */
+                ret = pem_read_block(client, PEM_READ_INPUT_STRING,
+                                    data->input_string,
+                                    sizeof(data->input_string));
+                if (!ret && (data->input_string[0] || data->input_string[1] ||
+                            data->input_string[2] || data->input_string[3]))
+                        data->input_length = sizeof(data->input_string);
+        }
+        ret = 0;
+        if (data->input_length) {
+                ret = sysfs_create_group(&client->dev.kobj, &pem_input_group);
+                if (ret)
+                        goto out_remove_groups;
+        }
+
+        /*
+         * Check if fan speed readings are supported.
+         * This is the case if we can read fan speed data,
+         * and if the returned data is not all zeros.
+         * Note that the fan alarm is always supported.
+         */
+        ret = pem_read_block(client, PEM_READ_FAN_SPEED,
+                             data->fan_speed,
+                             sizeof(data->fan_speed));
+        if (!ret && (data->fan_speed[0] || data->fan_speed[1] ||
+                     data->fan_speed[2] || data->fan_speed[3])) {
+                data->fans_supported = true;
+                ret = sysfs_create_group(&client->dev.kobj, &pem_fan_group);
+                if (ret)
+                        goto out_remove_groups;
+        }
+
+        data->hwmon_dev = hwmon_device_register(&client->dev);
+        if (IS_ERR(data->hwmon_dev)) {
+                ret = PTR_ERR(data->hwmon_dev);
+                goto out_remove_groups;
+        }
+
+        return 0;
+
+out_remove_groups:
+        sysfs_remove_group(&client->dev.kobj, &pem_input_group);
+        sysfs_remove_group(&client->dev.kobj, &pem_fan_group);
+        sysfs_remove_group(&client->dev.kobj, &pem_group);
+out_kfree:
+        kfree(data);
+        return ret;
+}
+
+static int pem_remove(struct i2c_client *client)
+{
+        struct pem_data *data = i2c_get_clientdata(client);
+
+        hwmon_device_unregister(data->hwmon_dev);
+
+        sysfs_remove_group(&client->dev.kobj, &pem_input_group);
+        sysfs_remove_group(&client->dev.kobj, &pem_fan_group);
+        sysfs_remove_group(&client->dev.kobj, &pem_group);
+
+        kfree(data);
+        return 0;
+}
+
+static const struct i2c_device_id pem_id[] = {
+        {"lineage_pem", 0},
+        {}
+};
+MODULE_DEVICE_TABLE(i2c, pem_id);
+
+static struct i2c_driver pem_driver = {
+        .driver = {
+                   .name = "lineage_pem",
+                   },
+        .probe = pem_probe,
+        .remove = pem_remove,
+        .id_table = pem_id,
+};
+
+static int __init pem_init(void)
+{
+        return i2c_add_driver(&pem_driver);
+}
+
+static void __exit pem_exit(void)
+{
+        i2c_del_driver(&pem_driver);
+}
+
+MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_DESCRIPTION("Lineage CPL PEM hardware monitoring driver");
+MODULE_LICENSE("GPL");
+
+module_init(pem_init);
+module_exit(pem_exit);