1 files changed, 597 insertions, 0 deletions

diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
new file mode 100644
index 000000000000..7c6f9ea5a254
--- /dev/null
+++ b/drivers/hwmon/lm63.c
@@ -0,0 +1,597 @@
+/*
+ * lm63.c - driver for the National Semiconductor LM63 temperature sensor
+ *          with integrated fan control
+ * Copyright (C) 2004-2005  Jean Delvare <khali@linux-fr.org>
+ * Based on the lm90 driver.
+ *
+ * The LM63 is a sensor chip made by National Semiconductor. It measures
+ * two temperatures (its own and one external one) and the speed of one
+ * fan, those speed it can additionally control. Complete datasheet can be
+ * obtained from National's website at:
+ *   http://www.national.com/pf/LM/LM63.html
+ *
+ * The LM63 is basically an LM86 with fan speed monitoring and control
+ * capabilities added. It misses some of the LM86 features though:
+ *  - No low limit for local temperature.
+ *  - No critical limit for local temperature.
+ *  - Critical limit for remote temperature can be changed only once. We
+ *    will consider that the critical limit is read-only.
+ *
+ * The datasheet isn't very clear about what the tachometer reading is.
+ * I had a explanation from National Semiconductor though. The two lower
+ * bits of the read value have to be masked out. The value is still 16 bit
+ * in width.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/hwmon-sysfs.h>
+
+/*
+ * Addresses to scan
+ * Address is fully defined internally and cannot be changed.
+ */
+
+static unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_1(lm63);
+
+/*
+ * The LM63 registers
+ */
+
+#define LM63_REG_CONFIG1                0x03
+#define LM63_REG_CONFIG2                0xBF
+#define LM63_REG_CONFIG_FAN             0x4A
+
+#define LM63_REG_TACH_COUNT_MSB         0x47
+#define LM63_REG_TACH_COUNT_LSB         0x46
+#define LM63_REG_TACH_LIMIT_MSB         0x49
+#define LM63_REG_TACH_LIMIT_LSB         0x48
+
+#define LM63_REG_PWM_VALUE              0x4C
+#define LM63_REG_PWM_FREQ               0x4D
+
+#define LM63_REG_LOCAL_TEMP             0x00
+#define LM63_REG_LOCAL_HIGH             0x05
+
+#define LM63_REG_REMOTE_TEMP_MSB        0x01
+#define LM63_REG_REMOTE_TEMP_LSB        0x10
+#define LM63_REG_REMOTE_OFFSET_MSB      0x11
+#define LM63_REG_REMOTE_OFFSET_LSB      0x12
+#define LM63_REG_REMOTE_HIGH_MSB        0x07
+#define LM63_REG_REMOTE_HIGH_LSB        0x13
+#define LM63_REG_REMOTE_LOW_MSB         0x08
+#define LM63_REG_REMOTE_LOW_LSB         0x14
+#define LM63_REG_REMOTE_TCRIT           0x19
+#define LM63_REG_REMOTE_TCRIT_HYST      0x21
+
+#define LM63_REG_ALERT_STATUS           0x02
+#define LM63_REG_ALERT_MASK             0x16
+
+#define LM63_REG_MAN_ID                 0xFE
+#define LM63_REG_CHIP_ID                0xFF
+
+/*
+ * Conversions and various macros
+ * For tachometer counts, the LM63 uses 16-bit values.
+ * For local temperature and high limit, remote critical limit and hysteresis
+ * value, it uses signed 8-bit values with LSB = 1 degree Celsius.
+ * For remote temperature, low and high limits, it uses signed 11-bit values
+ * with LSB = 0.125 degree Celsius, left-justified in 16-bit registers.
+ */
+
+#define FAN_FROM_REG(reg)       ((reg) == 0xFFFC || (reg) == 0 ? 0 : \
+                                 5400000 / (reg))
+#define FAN_TO_REG(val)         ((val) <= 82 ? 0xFFFC : \
+                                 (5400000 / (val)) & 0xFFFC)
+#define TEMP8_FROM_REG(reg)     ((reg) * 1000)
+#define TEMP8_TO_REG(val)       ((val) <= -128000 ? -128 : \
+                                 (val) >= 127000 ? 127 : \
+                                 (val) < 0 ? ((val) - 500) / 1000 : \
+                                 ((val) + 500) / 1000)
+#define TEMP11_FROM_REG(reg)    ((reg) / 32 * 125)
+#define TEMP11_TO_REG(val)      ((val) <= -128000 ? 0x8000 : \
+                                 (val) >= 127875 ? 0x7FE0 : \
+                                 (val) < 0 ? ((val) - 62) / 125 * 32 : \
+                                 ((val) + 62) / 125 * 32)
+#define HYST_TO_REG(val)        ((val) <= 0 ? 0 : \
+                                 (val) >= 127000 ? 127 : \
+                                 ((val) + 500) / 1000)
+
+/*
+ * Functions declaration
+ */
+
+static int lm63_attach_adapter(struct i2c_adapter *adapter);
+static int lm63_detach_client(struct i2c_client *client);
+
+static struct lm63_data *lm63_update_device(struct device *dev);
+
+static int lm63_detect(struct i2c_adapter *adapter, int address, int kind);
+static void lm63_init_client(struct i2c_client *client);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static struct i2c_driver lm63_driver = {
+        .owner          = THIS_MODULE,
+        .name           = "lm63",
+        .flags          = I2C_DF_NOTIFY,
+        .attach_adapter = lm63_attach_adapter,
+        .detach_client  = lm63_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct lm63_data {
+        struct i2c_client client;
+        struct semaphore update_lock;
+        char valid; /* zero until following fields are valid */
+        unsigned long last_updated; /* in jiffies */
+
+        /* registers values */
+        u8 config, config_fan;
+        u16 fan[2];     /* 0: input
+                           1: low limit */
+        u8 pwm1_freq;
+        u8 pwm1_value;
+        s8 temp8[3];    /* 0: local input
+                           1: local high limit
+                           2: remote critical limit */
+        s16 temp11[3];  /* 0: remote input
+                           1: remote low limit
+                           2: remote high limit */
+        u8 temp2_crit_hyst;
+        u8 alarms;
+};
+
+/*
+ * Sysfs callback functions and files
+ */
+
+static ssize_t show_fan(struct device *dev, struct device_attribute *devattr,
+                        char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct lm63_data *data = lm63_update_device(dev);
+        return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index]));
+}
+
+static ssize_t set_fan(struct device *dev, struct device_attribute *dummy,
+                       const char *buf, size_t count)
+{
+        struct i2c_client *client = to_i2c_client(dev);
+        struct lm63_data *data = i2c_get_clientdata(client);
+        unsigned long val = simple_strtoul(buf, NULL, 10);
+
+        down(&data->update_lock);
+        data->fan[1] = FAN_TO_REG(val);
+        i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_LSB,
+                                  data->fan[1] & 0xFF);
+        i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_MSB,
+                                  data->fan[1] >> 8);
+        up(&data->update_lock);
+        return count;
+}
+
+static ssize_t show_pwm1(struct device *dev, struct device_attribute *dummy,
+                         char *buf)
+{
+        struct lm63_data *data = lm63_update_device(dev);
+        return sprintf(buf, "%d\n", data->pwm1_value >= 2 * data->pwm1_freq ?
+                       255 : (data->pwm1_value * 255 + data->pwm1_freq) /
+                       (2 * data->pwm1_freq));
+}
+
+static ssize_t set_pwm1(struct device *dev, struct device_attribute *dummy,
+                        const char *buf, size_t count)
+{
+        struct i2c_client *client = to_i2c_client(dev);
+        struct lm63_data *data = i2c_get_clientdata(client);
+        unsigned long val;
+        
+        if (!(data->config_fan & 0x20)) /* register is read-only */
+                return -EPERM;
+
+        val = simple_strtoul(buf, NULL, 10);
+        down(&data->update_lock);
+        data->pwm1_value = val <= 0 ? 0 :
+                           val >= 255 ? 2 * data->pwm1_freq :
+                           (val * data->pwm1_freq * 2 + 127) / 255;
+        i2c_smbus_write_byte_data(client, LM63_REG_PWM_VALUE, data->pwm1_value);
+        up(&data->update_lock);
+        return count;
+}
+
+static ssize_t show_pwm1_enable(struct device *dev, struct device_attribute *dummy,
+                                char *buf)
+{
+        struct lm63_data *data = lm63_update_device(dev);
+        return sprintf(buf, "%d\n", data->config_fan & 0x20 ? 1 : 2);
+}
+
+static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
+                          char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct lm63_data *data = lm63_update_device(dev);
+        return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[attr->index]));
+}
+
+static ssize_t set_temp8(struct device *dev, struct device_attribute *dummy,
+                         const char *buf, size_t count)
+{
+        struct i2c_client *client = to_i2c_client(dev);
+        struct lm63_data *data = i2c_get_clientdata(client);
+        long val = simple_strtol(buf, NULL, 10);
+
+        down(&data->update_lock);
+        data->temp8[1] = TEMP8_TO_REG(val);
+        i2c_smbus_write_byte_data(client, LM63_REG_LOCAL_HIGH, data->temp8[1]);
+        up(&data->update_lock);
+        return count;
+}
+
+static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr,
+                           char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct lm63_data *data = lm63_update_device(dev);
+        return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->temp11[attr->index]));
+}
+
+static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
+                          const char *buf, size_t count)
+{
+        static const u8 reg[4] = {
+                LM63_REG_REMOTE_LOW_MSB,
+                LM63_REG_REMOTE_LOW_LSB,
+                LM63_REG_REMOTE_HIGH_MSB,
+                LM63_REG_REMOTE_HIGH_LSB,
+        };
+
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct lm63_data *data = i2c_get_clientdata(client);
+        long val = simple_strtol(buf, NULL, 10);
+        int nr = attr->index;
+
+        down(&data->update_lock);
+        data->temp11[nr] = TEMP11_TO_REG(val);
+        i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2],
+                                  data->temp11[nr] >> 8);
+        i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1],
+                                  data->temp11[nr] & 0xff);
+        up(&data->update_lock);
+        return count;
+}
+
+/* Hysteresis register holds a relative value, while we want to present
+   an absolute to user-space */
+static ssize_t show_temp2_crit_hyst(struct device *dev, struct device_attribute *dummy,
+                                    char *buf)
+{
+        struct lm63_data *data = lm63_update_device(dev);
+        return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[2])
+                       - TEMP8_FROM_REG(data->temp2_crit_hyst));
+}
+
+/* And now the other way around, user-space provides an absolute
+   hysteresis value and we have to store a relative one */
+static ssize_t set_temp2_crit_hyst(struct device *dev, struct device_attribute *dummy,
+                                   const char *buf, size_t count)
+{
+        struct i2c_client *client = to_i2c_client(dev);
+        struct lm63_data *data = i2c_get_clientdata(client);
+        long val = simple_strtol(buf, NULL, 10);
+        long hyst;
+
+        down(&data->update_lock);
+        hyst = TEMP8_FROM_REG(data->temp8[2]) - val;
+        i2c_smbus_write_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST,
+                                  HYST_TO_REG(hyst));
+        up(&data->update_lock);
+        return count;
+}
+
+static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy,
+                           char *buf)
+{
+        struct lm63_data *data = lm63_update_device(dev);
+        return sprintf(buf, "%u\n", data->alarms);
+}
+
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan,
+        set_fan, 1);
+
+static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1);
+static DEVICE_ATTR(pwm1_enable, S_IRUGO, show_pwm1_enable, NULL);
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp8, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8,
+        set_temp8, 1);
+
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11,
+        set_temp11, 1);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11,
+        set_temp11, 2);
+static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp8, NULL, 2);
+static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp2_crit_hyst,
+        set_temp2_crit_hyst);
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+/*
+ * Real code
+ */
+
+static int lm63_attach_adapter(struct i2c_adapter *adapter)
+{
+        if (!(adapter->class & I2C_CLASS_HWMON))
+                return 0;
+        return i2c_detect(adapter, &addr_data, lm63_detect);
+}
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int lm63_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+        struct i2c_client *new_client;
+        struct lm63_data *data;
+        int err = 0;
+
+        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+                goto exit;
+
+        if (!(data = kmalloc(sizeof(struct lm63_data), GFP_KERNEL))) {
+                err = -ENOMEM;
+                goto exit;
+        }
+        memset(data, 0, sizeof(struct lm63_data));
+
+        /* The common I2C client data is placed right before the
+           LM63-specific data. */
+        new_client = &data->client;
+        i2c_set_clientdata(new_client, data);
+        new_client->addr = address;
+        new_client->adapter = adapter;
+        new_client->driver = &lm63_driver;
+        new_client->flags = 0;
+
+        /* Default to an LM63 if forced */
+        if (kind == 0)
+                kind = lm63;
+
+        if (kind < 0) { /* must identify */
+                u8 man_id, chip_id, reg_config1, reg_config2;
+                u8 reg_alert_status, reg_alert_mask;
+
+                man_id = i2c_smbus_read_byte_data(new_client,
+                         LM63_REG_MAN_ID);
+                chip_id = i2c_smbus_read_byte_data(new_client,
+                          LM63_REG_CHIP_ID);
+                reg_config1 = i2c_smbus_read_byte_data(new_client,
+                              LM63_REG_CONFIG1);
+                reg_config2 = i2c_smbus_read_byte_data(new_client,
+                              LM63_REG_CONFIG2);
+                reg_alert_status = i2c_smbus_read_byte_data(new_client,
+                                   LM63_REG_ALERT_STATUS);
+                reg_alert_mask = i2c_smbus_read_byte_data(new_client,
+                                 LM63_REG_ALERT_MASK);
+
+                if (man_id == 0x01 /* National Semiconductor */
+                 && chip_id == 0x41 /* LM63 */
+                 && (reg_config1 & 0x18) == 0x00
+                 && (reg_config2 & 0xF8) == 0x00
+                 && (reg_alert_status & 0x20) == 0x00
+                 && (reg_alert_mask & 0xA4) == 0xA4) {
+                        kind = lm63;
+                } else { /* failed */
+                        dev_dbg(&adapter->dev, "Unsupported chip "
+                                "(man_id=0x%02X, chip_id=0x%02X).\n",
+                                man_id, chip_id);
+                        goto exit_free;
+                }
+        }
+
+        strlcpy(new_client->name, "lm63", I2C_NAME_SIZE);
+        data->valid = 0;
+        init_MUTEX(&data->update_lock);
+
+        /* Tell the I2C layer a new client has arrived */
+        if ((err = i2c_attach_client(new_client)))
+                goto exit_free;
+
+        /* Initialize the LM63 chip */
+        lm63_init_client(new_client);
+
+        /* Register sysfs hooks */
+        if (data->config & 0x04) { /* tachometer enabled */
+                device_create_file(&new_client->dev,
+                                   &sensor_dev_attr_fan1_input.dev_attr);
+                device_create_file(&new_client->dev,
+                                   &sensor_dev_attr_fan1_min.dev_attr);
+        }
+        device_create_file(&new_client->dev, &dev_attr_pwm1);
+        device_create_file(&new_client->dev, &dev_attr_pwm1_enable);
+        device_create_file(&new_client->dev,
+                           &sensor_dev_attr_temp1_input.dev_attr);
+        device_create_file(&new_client->dev,
+                           &sensor_dev_attr_temp2_input.dev_attr);
+        device_create_file(&new_client->dev,
+                           &sensor_dev_attr_temp2_min.dev_attr);
+        device_create_file(&new_client->dev,
+                           &sensor_dev_attr_temp1_max.dev_attr);
+        device_create_file(&new_client->dev,
+                           &sensor_dev_attr_temp2_max.dev_attr);
+        device_create_file(&new_client->dev,
+                           &sensor_dev_attr_temp2_crit.dev_attr);
+        device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst);
+        device_create_file(&new_client->dev, &dev_attr_alarms);
+
+        return 0;
+
+exit_free:
+        kfree(data);
+exit:
+        return err;
+}
+
+/* Idealy we shouldn't have to initialize anything, since the BIOS
+   should have taken care of everything */
+static void lm63_init_client(struct i2c_client *client)
+{
+        struct lm63_data *data = i2c_get_clientdata(client);
+
+        data->config = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG1);
+        data->config_fan = i2c_smbus_read_byte_data(client,
+                                                    LM63_REG_CONFIG_FAN);
+
+        /* Start converting if needed */
+        if (data->config & 0x40) { /* standby */
+                dev_dbg(&client->dev, "Switching to operational mode");
+                data->config &= 0xA7;
+                i2c_smbus_write_byte_data(client, LM63_REG_CONFIG1,
+                                          data->config);
+        }
+
+        /* We may need pwm1_freq before ever updating the client data */
+        data->pwm1_freq = i2c_smbus_read_byte_data(client, LM63_REG_PWM_FREQ);
+        if (data->pwm1_freq == 0)
+                data->pwm1_freq = 1;
+
+        /* Show some debug info about the LM63 configuration */
+        dev_dbg(&client->dev, "Alert/tach pin configured for %s\n",
+                (data->config & 0x04) ? "tachometer input" :
+                "alert output");
+        dev_dbg(&client->dev, "PWM clock %s kHz, output frequency %u Hz\n",
+                (data->config_fan & 0x08) ? "1.4" : "360",
+                ((data->config_fan & 0x08) ? 700 : 180000) / data->pwm1_freq);
+        dev_dbg(&client->dev, "PWM output active %s, %s mode\n",
+                (data->config_fan & 0x10) ? "low" : "high",
+                (data->config_fan & 0x20) ? "manual" : "auto");
+}
+
+static int lm63_detach_client(struct i2c_client *client)
+{
+        int err;
+
+        if ((err = i2c_detach_client(client))) {
+                dev_err(&client->dev, "Client deregistration failed, "
+                        "client not detached\n");
+                return err;
+        }
+
+        kfree(i2c_get_clientdata(client));
+        return 0;
+}
+
+static struct lm63_data *lm63_update_device(struct device *dev)
+{
+        struct i2c_client *client = to_i2c_client(dev);
+        struct lm63_data *data = i2c_get_clientdata(client);
+
+        down(&data->update_lock);
+
+        if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+                if (data->config & 0x04) { /* tachometer enabled  */
+                        /* order matters for fan1_input */
+                        data->fan[0] = i2c_smbus_read_byte_data(client,
+                                       LM63_REG_TACH_COUNT_LSB) & 0xFC;
+                        data->fan[0] |= i2c_smbus_read_byte_data(client,
+                                        LM63_REG_TACH_COUNT_MSB) << 8;
+                        data->fan[1] = (i2c_smbus_read_byte_data(client,
+                                        LM63_REG_TACH_LIMIT_LSB) & 0xFC)
+                                     | (i2c_smbus_read_byte_data(client,
+                                        LM63_REG_TACH_LIMIT_MSB) << 8);
+                }
+
+                data->pwm1_freq = i2c_smbus_read_byte_data(client,
+                                  LM63_REG_PWM_FREQ);
+                if (data->pwm1_freq == 0)
+                        data->pwm1_freq = 1;
+                data->pwm1_value = i2c_smbus_read_byte_data(client,
+                                   LM63_REG_PWM_VALUE);
+
+                data->temp8[0] = i2c_smbus_read_byte_data(client,
+                                 LM63_REG_LOCAL_TEMP);
+                data->temp8[1] = i2c_smbus_read_byte_data(client,
+                                 LM63_REG_LOCAL_HIGH);
+
+                /* order matters for temp2_input */
+                data->temp11[0] = i2c_smbus_read_byte_data(client,
+                                  LM63_REG_REMOTE_TEMP_MSB) << 8;
+                data->temp11[0] |= i2c_smbus_read_byte_data(client,
+                                   LM63_REG_REMOTE_TEMP_LSB);
+                data->temp11[1] = (i2c_smbus_read_byte_data(client,
+                                  LM63_REG_REMOTE_LOW_MSB) << 8)
+                                | i2c_smbus_read_byte_data(client,
+                                  LM63_REG_REMOTE_LOW_LSB);
+                data->temp11[2] = (i2c_smbus_read_byte_data(client,
+                                  LM63_REG_REMOTE_HIGH_MSB) << 8)
+                                | i2c_smbus_read_byte_data(client,
+                                  LM63_REG_REMOTE_HIGH_LSB);
+                data->temp8[2] = i2c_smbus_read_byte_data(client,
+                                 LM63_REG_REMOTE_TCRIT);
+                data->temp2_crit_hyst = i2c_smbus_read_byte_data(client,
+                                        LM63_REG_REMOTE_TCRIT_HYST);
+
+                data->alarms = i2c_smbus_read_byte_data(client,
+                               LM63_REG_ALERT_STATUS) & 0x7F;
+
+                data->last_updated = jiffies;
+                data->valid = 1;
+        }
+
+        up(&data->update_lock);
+
+        return data;
+}
+
+static int __init sensors_lm63_init(void)
+{
+        return i2c_add_driver(&lm63_driver);
+}
+
+static void __exit sensors_lm63_exit(void)
+{
+        i2c_del_driver(&lm63_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("LM63 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm63_init);
+module_exit(sensors_lm63_exit);